Commit Graph

69 Commits

Author SHA1 Message Date
Nathan Whitehorn
0d8d9edaaa Make ofw_bus_get_node() consistently return -1 when there is no associated
OF node, instead of a random mixture of 0 and -1. Update all checks for 0
to check for -1 instead.

MFC after:	4 weeks
2012-03-15 22:53:39 +00:00
John Baldwin
1b1596a3b3 - Add a bus_dma tag to each PCI bus that is a child of a Host-PCI bridge.
The tag enforces a single restriction that all DMA transactions must not
  cross a 4GB boundary.  Note that while this restriction technically only
  applies to PCI-express, this change applies it to all PCI devices as it
  is simpler to implement that way and errs on the side of caution.
- Add a softc structure for PCI bus devices to hold the bus_dma tag and
  a new pci_attach_common() routine that performs actions common to the
  attach phase of all PCI bus drivers.  Right now this only consists of
  a bootverbose printf and the allocate of a bus_dma tag if necessary.
- Adjust all PCI bus drivers to allocate a PCI bus softc and to call
  pci_attach_common() from their attach routines.

MFC after:	2 weeks
2012-03-02 20:38:04 +00:00
Nathan Whitehorn
8a1a60d49a The bus resource adjustment API is not meant to work on active resources.
Return an error if a driver attempts this, and, if INVARIANTS is on,
panic.

Reviewed by:	jhb
2012-02-07 19:14:13 +00:00
Nathan Whitehorn
c3b91598a5 Inherit from PCI bridge driver instead of manually specifying all of its
methods.

Obtained from:	sparc64
MFC after:	1 week
2012-02-05 20:07:45 +00:00
Nathan Whitehorn
bc890e542e Make sure to remap adjusted resources. 2012-02-05 16:54:26 +00:00
Nathan Whitehorn
942efd602f Add support for bus_adjust_resource() on all PowerPC/AIM PCI bridges. With
this change, NEW_PCIB appears to work without incident at least on a G5
iMac. More testing will be required before it is turned on in GENERIC.
2012-02-05 00:51:59 +00:00
Nathan Whitehorn
9a35e64eb4 Unify OF PCI infrastructure, including changing from parsing the device
tree based on heuristics to parsing it based on the spec. This should also
lay the foundation for NEW_PCIB on PowerPC.

MFC after:	3 months
2012-02-04 19:54:13 +00:00
Nathan Whitehorn
8fd26abad8 Avoid warnings about duplicate modules.
MFC after:	2 weeks
2012-02-04 19:50:26 +00:00
Andreas Tobler
9eab2f146a This commit adds profiling support for powerpc64. Now we can do application
profiling and kernel profiling. To enable kernel profiling one has to build
kgmon(8). I will enable the build once I managed to build and test powerpc
(32-bit) kernels with profiling support.

- add a powerpc64 PROF_PROLOGUE for _mcount.
- add macros to avoid adding the PROF_PROLOGUE in certain assembly entries.
- apply these macros where needed.
- add size information to the MCOUNT function.

MFC after:	3 weeks, together with r230291
2012-01-20 22:34:19 +00:00
Nathan Whitehorn
8bab0d80ca Prevent an error resulting from signed/unsigned comparison on systems
that do not comply with the OF spec.

Submitted by:	Anders Gavare
MFC after:	1 week
2012-01-20 22:24:39 +00:00
Marius Strobl
4b7ec27007 - There's no need to overwrite the default device method with the default
one. Interestingly, these are actually the default for quite some time
  (bus_generic_driver_added(9) since r52045 and bus_generic_print_child(9)
  since r52045) but even recently added device drivers do this unnecessarily.
  Discussed with: jhb, marcel
- While at it, use DEVMETHOD_END.
  Discussed with: jhb
- Also while at it, use __FBSDID.
2011-11-22 21:28:20 +00:00
Ed Schouten
6472ac3d8a Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs.
The SYSCTL_NODE macro defines a list that stores all child-elements of
that node. If there's no SYSCTL_DECL macro anywhere else, there's no
reason why it shouldn't be static.
2011-11-07 15:43:11 +00:00
Ed Schouten
d745c852be Mark MALLOC_DEFINEs static that have no corresponding MALLOC_DECLAREs.
This means that their use is restricted to a single C file.
2011-11-07 06:44:47 +00:00
Nathan Whitehorn
9134df8b6f Add better error handling for RTAS calls. These can potentially cause
machine checks (e.g. invalid PCI configuration cycles), but these can
be caught and recovered from. This change also the RTAS PCI driver to
work without modification as a replacement for the Grackle driver on
Grackle-based Powermacs.
2011-06-26 16:11:36 +00:00
Nathan Whitehorn
e69dff491d Use the ABI-mandated thread pointer register (r2 for ppc32, r13 for ppc64)
instead of a PCPU field for curthread. This averts a race on SMP systems
with a high interrupt rate where the thread looking up the value of
curthread could be preempted and migrated between obtaining the PCPU
pointer and reading the value of pc_curthread, resulting in curthread being
observed to be the current thread on the thread's original CPU. This played
merry havoc with the system, in particular with mutexes. Many thanks to
jhb for helping me work this one out.

Note that Book-E is in principle susceptible to the same problem, but has
not been modified yet due to lack of Book-E hardware.

MFC after:	2 weeks
2011-06-23 22:21:28 +00:00
Nathan Whitehorn
d8c6808ade Retry the memory map-related portions of r222613, written by andreast,
after some minor tweaks and an increase in the early-boot stack space in
r222632.
2011-06-04 04:00:40 +00:00
Nathan Whitehorn
48174c14b5 Temporarily back out those parts of r222613 related to parsing the memory
map. They cause non-understood boot failures on some Apple machines with
more than 2 GB of RAM (like my work desktop).
2011-06-02 17:43:17 +00:00
Nathan Whitehorn
1787909001 MFpseries:
Renovate and improve the AIM Open Firmware support:
- Add RTAS (Run-Time Abstraction Services) support, found on all IBM systems
  and some Apple ones
- Improve support for 32-bit real mode Open Firmware systems
- Pull some more OF bits over from the AIM directory
- Fix memory detection on IBM LPARs and systems with more than one /memory
  node (by andreast@)
2011-06-02 14:12:37 +00:00
Nathan Whitehorn
797c37ee2b Fix whitespace nit. 2011-03-09 15:03:42 +00:00
Marcel Moolenaar
607ebaaf0c Rename INTR_VEC to MAP_IRQ. From the OFW or FDT we obtain a
PIC handle with interrupt pin. This we map to the resource
called SYS_RES_IRQ.
2011-02-02 05:58:51 +00:00
Andreas Tobler
ec664c11dc Fix null string handling in ofw_real_nextprop function. Pass the right
length to ofw_real_map in case of a null string.
This makes ofwdump(8) work correctly when trying to print all properties
with ofwdump -p.

Approved by:	nwhitehorn (mentor)
2011-01-05 21:38:02 +00:00
Nathan Whitehorn
fe3b4685c7 Remove use of a separate ofw_pmap on 32-bit CPUs. Many Open Firmware
mappings need to end up in the kernel anyway since the kernel begins
executing in OF context. Separating them adds needless complexity,
especially since the powerpc64 and mmu_oea64 code gave up on it a long
time ago.

As a side effect, the PPC ofw_machdep code is no longer AIM-specific,
so move it to powerpc/ofw.
2010-11-12 05:12:38 +00:00
Nathan Whitehorn
680a18f951 Map the Open Firmware framebuffer console with write combining turned on,
and set memory attributes appropriately for mmap() calls on /dev/console.
Xorg no longer uses /dev/console to mmap the framebuffer, so framebuffer
write combining support in X will arrive in the next patch.
2010-10-01 19:02:31 +00:00
Marius Strobl
cdb25d827e Change OF_interpret() to also take an array of cell_t (missed in r209801).
Reviewed by:	nwhitehorn
2010-09-11 18:55:00 +00:00
Nathan Whitehorn
900d6c6a00 Make ofw_syscons work on 64-bit systems. 2010-07-08 14:40:46 +00:00
Nathan Whitehorn
70d75337eb Fix several bugs in the real-mode Open Firmware implementation and provide
a virtual-mode version for use on 64-bit systems, which have 32-bit
firmware implementations and require similar constraints on addressing
to the real-mode implementation.
2010-07-08 14:35:35 +00:00
Nathan Whitehorn
054e5dcbe4 Change the argument type to OF_call_method to take an array of cell_t
instead of unsigned longs to prepare for platforms where they are not
the same.
2010-07-08 14:29:23 +00:00
Nathan Whitehorn
8aa8e94d34 Add MSI support for PCI devices attached to the CPC925 and CPC945 bridges
found in Apple and IBM G5 systems.
2010-06-18 17:39:56 +00:00
Nathan Whitehorn
a7a32004a4 Change the default interrupt polarity on PowerPC systems from high to low.
On Apple systems at least, all the level interrupts are wired active low.
Before this change, our PIC programming only worked because Apple hardware
ignores the interrupt polarity bit on all interrupts except IRQ 0.
2010-06-18 14:16:24 +00:00
Nathan Whitehorn
eaef5f0af8 Provide for multiple, cascaded PICs on PowerPC systems, and extend the
OFW interrupt map interface to also return the device's interrupt parent.

MFC after:	8.1-RELEASE
2010-06-18 14:06:27 +00:00
Nathan Whitehorn
96c170aa1a Modify the console mouse pointer drawing routine to use single-byte writes
instead of 4-byte ones. Because the mouse pointer can start part way
through a character cell, 4-byte memory operations are not necessarily
aligned, triggering a fatal alignment exception when the console pointer
was moved on PowerPC G5 systems.

MFC after:	3 days
2010-06-15 22:01:38 +00:00
Rafal Jaworowski
8297758a22 Prepare and extend OFW layer for FDT support.
o Let OFW_INIT() and OF_init() return status value.

o Provide helper routines for 'compatible' property handling.

o Only compile OF and OFW code, which is relevant in FDT scenario.

o Other minor cosmetics

Reviewed by:	imp
Sponsored by:	The FreeBSD Foundation
2010-05-28 10:43:56 +00:00
Nathan Whitehorn
4a26780b9a Pull OF_quiesce() out of the MI Open Firmware layer and entirely into
PPC ofw_machdep.c, in recognition of its state as a machine specific hack.

Requested by:	marius
2010-05-16 22:01:43 +00:00
Nathan Whitehorn
4dea0435b5 Relocate interrupt sense setting for K2 SATA from the ATA driver to the
OFW PCI layer and read the sense directly from the device tree instead
of guessing.

MFC after:	1 week
2010-05-16 17:55:09 +00:00
Nathan Whitehorn
79bf3fcd18 On PowerMac11,2 and (presumably) PowerMac12,1, we need to quiesce the
firmware in order to take over control of the SMU. Without doing this,
the firmware background process doing fan control will run amok as we
take over the system and crash the management chip.

This is limited to these two machines because our kernel is heavily
dependent on firmware accesses, and so quiescing firmware can cause
nasty problems.
2010-05-16 15:56:59 +00:00
Marius Strobl
bd7e69e4c5 With r205496 in place we should ensure that nargs and nreturns are always
set to sane values as they no longer default to 0, otherwise some OFW
implementation might copy in or out arguments not based on what the actual
function takes but what ever stack garbage nargs and nreturns supply.

Reviewed by:	nwhitehorn
2010-04-02 21:48:27 +00:00
Nathan Whitehorn
e0cbed6815 Set hw.ofwfb.relax_mmap=1 by default. While these checks may be a good
idea in principle, X does not work without them on basically any hardware,
and this is probably the most frequent problem people run into on PowerPC.

Prodded by:	rnoland
MFC after:	1 week
2010-03-28 17:17:32 +00:00
Nathan Whitehorn
d4bccd63a2 Do not declare the various OFW command buffers static. It does not
appear to be necessary on either sparc64 or powerpc, and is a
concurrency nightmare.

Reviewed by:	marius
2010-03-23 01:09:45 +00:00
Robert Noland
cfd7bacef2 Update d_mmap() to accept vm_ooffset_t and vm_memattr_t.
This replaces d_mmap() with the d_mmap2() implementation and also
changes the type of offset to vm_ooffset_t.

Purge d_mmap2().

All driver modules will need to be rebuilt since D_VERSION is also
bumped.

Reviewed by:	jhb@
MFC after:	Not in this lifetime...
2009-12-29 21:51:28 +00:00
Andriy Gapon
4fc23012c6 strict kobj signatures: some ofw_setprop fixes
propname parameter is const

Reviewed by:	imp, current@
Approved by:	jhb (mentor)
2009-06-11 17:15:20 +00:00
Nathan Whitehorn
9eb9db93da Introduce support for cpufreq on PowerPC with the dynamic frequency
switching capabilities of the MPC7447A and MPC7448.
2009-05-31 09:01:23 +00:00
Nathan Whitehorn
8446b20662 Add an Open Firmware access module for real-mode OF accesses to the PowerPC
build. This is required for the IBM Mambo simulator, as well as a variety
of non-Apple PowerPC hardware.
2009-04-05 18:40:15 +00:00
Nathan Whitehorn
1c96bdd146 Add support for 64-bit PowerPC CPUs operating in the 64-bit bridge mode
provided, for example, on the PowerPC 970 (G5), as well as on related CPUs
like the POWER3 and POWER4.

This also adds support for various built-in hardware found on Apple G5
hardware (e.g. the IBM CPC925 northbridge).

Reviewed by:    grehan
2009-04-04 00:22:44 +00:00
Nathan Whitehorn
94b4a038a1 Adapt parts of the sparc64 Open Firmware bus enumeration code (in particular,
the code for parsing interrupt maps) to PowerPC and reflect their new MI
status by moving them to the shared dev/ofw directory.

This commit also modifies the OFW PCI enumeration procedure on PowerPC to
allow the bus to find non-firmware-enumerated devices that Apple likes to add,
and adds some useful Open Firmware properties (compat and name) to the pnpinfo
string of children on OFW SBus, EBus, PCI, and MacIO links. Because of the
change to PCI enumeration on PowerPC, X has started working again on PPC
machines with Grackle hostbridges.

Reviewed by:	marius
Obtained from:	sparc64
2008-12-15 15:31:10 +00:00
Nathan Whitehorn
68124cc7f8 Allow OFW syscons to restore itself when the X server exits or there is a VT switch
by redoing the Open Firmware card initialization calls in ofwfb_set_mode(). This
uses the same trick (setting V_ADP_MODECHANGE) to arrange this as machfb(4) and
creatorfb(4).
2008-12-13 20:53:57 +00:00
Nathan Whitehorn
05156b9b7e Add support for a console mouse pointer on Open Firmware syscons.
MFC after:	7.1-RELEASE
2008-12-13 20:13:22 +00:00
Nathan Whitehorn
fc7a9640c7 Prevent the OF syscons module from trying to attach to real devices on the
nexus by only attaching to a device with no OF node.
2008-10-15 03:38:03 +00:00
Nathan Whitehorn
51d163d3e9 Convert PowerPC AIM PCI and nexus busses to standard OFW bus interface. This
simplifies certain device attachments (Kauai ATA, for instance), and makes
possible others on new hardware.

On G5 systems, there are several otherwise standard PCI devices
(Serverworks SATA) that will not allow their interrupt properties to be
written, so this information must be supplied directly from Open Firmware.

Obtained from:	sparc64
2008-10-14 14:54:14 +00:00
Maxim Sobolev
d3e5e8d1b6 Improve rev 183168, so that if /chosen/stdout is connected to the serial
port by OF the syscons won't take over console. Only attach syscons to "screen"
if /chosen/stdout is not connected, which could be the case when loader(8)
is booted directly from the OF. This fixes Marcel's Xserver.

Reported by:	marcel
2008-09-23 22:16:23 +00:00
Maxim Sobolev
ccb33393cc When attaching framebuffer to "/chosen/stdout" node fails, try attaching
to "screen" node directly. The problem is that by default OF on some (all?)
Macs either doesn't provide "/chosen/stdout" or redirects it somewhere,
unless you boot in manual mode via CMD-ALT-O-F. It's nice to see normal
FreeBSD boot output instead of blank gray screen.
2008-09-19 03:22:47 +00:00