In case u-boot was compiled without video support set the PLL
to 432Mhz (which allow us to use most of the HDMI resolution for
tcon) and set it as the parent for the DE clock.
always copy intrinsic data types before copying bitfields which are
based on those types. This ensures the type ordering in the destination
CTF container matches the assumption made elsewhere in the CTF code
that instrinsic data types will always appear before bitfields based on
those types.
This resolves the following error message some users have seen after
r366908:
"/usr/lib/dtrace/ipfw.d", line 121: failed to copy type of 'ip6p':
Conflicting type is already defined
Reviewed by: markj
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D27213
Fix incorrect mask being used when FE_INVALID bit is wanted by user.
The problem was noticed thanks to msun fenv tests.
Reviewed by: jhibbits, luporl
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D27201
r367416 should have called save_fpu() before kern_sigprocmask to avoid
race condition
Thanks jhibbits and bdragon for pointing it out
Reviewed by: jhibbits
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D27241
After r367417, both mmu_oea64 and mmu_radix were defining the vm.pmap
sysctl node, resulting in the later definition hiding the properties of
the previous one. Avoid this issue by defining vm.pmap in a common
source file and declaring it where needed.
This change also standardizes the tunable name used to enable superpages
and change its default to disabled on radix MMU, because it still has some
issues with superpages.
Reviewed by: bdragon, jhibbits
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D27156
The synopsis section had two very similar entries. The flags documented by
the first one were a strict subset of the second one. Let's just keep only
the second entry for simplicity.
MFC after: 1 week
The former tries to dereference memory allocated by the latter. If counting
the redistributor fails it may try to dereference memory that was never
allocated.
Sponsored by: Innovate UK
The same driver works on both, allow the driver to attach to a GICv4
controller with the ACPI attachment.
Reported by: Andrey Fesenko <f0andrey_gmail.com>
Sponsored by: Innovate UK
One of the last shifts inadvertently moved these static assertions out of a
COMPAT_FREEBSD32 block, which the relevant definitions are limited to.
Fix it.
Pointy hat: kevans
All of the compat32 variants are substantially the same, save for
copyin/copyout (mostly). Apply the same kind of technique used with kevent
here by having the syscall routines supply a umtx_copyops describing the
operations needed.
umtx_copyops carries the bare minimum needed- size of timespec and
_umtx_time are used for determining if copyout is needed in the sem2_wait
case.
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27222
Specifically, if we're waking up some value n > BATCH_SIZE, then the
copyin(9) is wrong on the second iteration due to upp being the wrong type.
upp is currently a uint32_t**, so upp + pos advances it by twice as many
elements as it should (host pointer size vs. compat32 pointer size).
Fix it by just making upp a uint32_t*; it's still technically a double
pointer, but the distinction doesn't matter all that much here since we're
just doing arithmetic on it.
Add a test case that demonstrates the problem, placed with the libthr tests
since one messing with _umtx_op should be running these tests. Running under
compat32, the new test case will hang as threads after the first 128 get
missed in the wake. it's not immediately clear how to hit it in practice,
since pthread_cond_broadcast() uses a smaller (sleepq batch?) size observed
to be around ~50 -- I did not spend much time digging into it.
The uintptr_t change makes no functional difference, but i've tossed it in
since it's more accurate (semantically).
Reported by: Andrew Gierth (andrew_tao173.riddles.org.uk, inspection)
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27231
This clever technique to get a time remaining back was added to support sem_clockwait_np.
Reviewed by: kib, vangyzen
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27160
Add __unused to some args.
Change type of the iterator variables to match loop control.
Remove excessive {}.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D27220
This adds an arm64 iommu interface and a driver for Arm System Memory
Management Unit version 3.2 (ARM SMMU v3.2) specified in ARM IHI 0070C
document.
Hardware overview is provided in the header of smmu.c file.
The support is disabled by default. To enable add 'options IOMMU' to your
kernel configuration file.
The support was developed on Arm Neoverse N1 System Development Platform
(ARM N1SDP), kindly provided by ARM Ltd.
Currently, PCI-based devices and ACPI platforms are supported only.
The support was tested on IOMMU-enabled Marvell SATA controller,
Realtek Ethernet controller and a TI xHCI USB controller with a low to
medium load only.
Many thanks to Konstantin Belousov for help forming the generic IOMMU
framework that is vital for this project; to Andrew Turner for adding
IOMMU support to MSI interrupt code; to Mark Johnston for help with SMMU
page management; to John Baldwin for explaining various IOMMU bits.
Reviewed by: mmel
Relnotes: yes
Sponsored by: DARPA / AFRL
Sponsored by: Innovate UK (Digital Security by Design programme)
Differential Revision: https://reviews.freebsd.org/D24618
Check for the variable SUBDIR. and error as it usually means someone
forgot to include src.opts.mk.
This guard from CheriBSD found the bugs in r367655 and r367728.
Reviewed by: bdrewery, arichardson
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D27211
The program reads oldsize bytes from oldfile, and proceeds to initialize
a suffix array of oldsize elements using divsufsort(). As per the
function's API [1], array indices 0 through n-1 are initialized.
Later, search() is called, but with index bounds [0, n]. Depending on
the contents of the malloc'd buffer, accessing this uninitialized index
at the end of can result in a segmentation fault. Fix this by passing
oldsize-1 to search(), limiting the search bounds to [0, n-1].
This bug is a result of r303285, which introduced divsufsort() as an
alternate suffix sorting function to the existing qsufsort(). It seems
that qsufsort() did initialize the final empty element, meaning it could
be safely accessed. This difference in the implementations was missed at
the time.
[1] https://github.com/y-256/libdivsufsort
Discussed with: cperciva
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26911
This moves entire large alloc handling out of all consumers, apart from
deciding to go there.
This is a step towards creating a fast path.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D27198
The entry->flags field is initialized in iommu_gas_init_domain().
Reviewed by: kib
Sponsored by: Innovate DSbD
Differential Revision: https://reviews.freebsd.org/D27235
This is needed on arm64 for the interface between iommu framework
and iommu controller drivers.
Reviewed by: kib
Sponsored by: Innovate DSbD
Differential Revision: https://reviews.freebsd.org/D27229
APIs that have deferred callbacks should have some kind of cleanup
function that callers can use to fence the callbacks. Otherwise things
like module unloading can lead to dangling function pointers, or worse.
The IB MR code is the only place that calls this function and had a
really poor attempt at creating this fence. Provide a good version in
the core code as future patches will add more places that need this
fence.
Linux commit:
e355477ed9e4f401e3931043df97325d38552d54
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
Report EQE data upon CQ completion to let upper layers use this data.
Linux commit:
4e0e2ea1886afe8c001971ff767f6670312a9b04
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
Enhance mlx5_core_create_cq() to get the command out buffer from the
callers to let them use the output.
Linux commit:
38164b771947be9baf06e78ffdfb650f8f3e908e
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
To prevent a hardware memory leak when a DEVX DCT object is destroyed
without calling drain DCT before, (e.g. under cleanup flow), need to
manage its creation and destruction via mlx5 core.
Linux commit:
c5ae1954c47d3fd8815bd5a592aba18702c93f33
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
Make sure order of cleanup is exactly the opposite of initialization.
Linux commit:
f4044dac63e952ac1137b6df02b233d37696e2f5
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
Since thread_zone is marked NOFREE the thread_fini callback is never
executed, meaning memory allocated by seltdinit is never released.
Adding the call to thread_dtor is not sufficient as exiting processes
cache the main thread.
Refcounting was added to combat a race between selfdfree and doselwakup,
but it adds avoidable overhead.
selfdfree detects it can free the object by ->sf_si == NULL, thus we can
ensure that the condition only holds after all accesses are completed.
after r367304 and r367324, when WITH_LLVM_CXXFILT is enabled.
Noticed by: "Herbert J. Skuhra" <herbert@gojira.at>
MFC after: 3 days
X-MFC-With: r367304
When the AHCI code was reworked to use FreeBSD struct
definitions, the valid element was mis-transcribed resulting
in the UMDA capability being hidden. This prevented Illumos
from using AHCI disk/cdrom drives.
Fix by using definitions that match the code pre-rework.
PR: 250924
Submitted by: Rolf Stalder
Reported by: Rolf Stalder
MFC after: 3 days
They are only there to provide less innacurate statistics for debuggers.
However, this is quite heavy-weight and instead it would be better to
teach debuggers how to obtain the necessary information.
