We are using asize property from pool label and we do not depend
on partition data to find last two pool labels and to validate LBA for disk IO.
This does allow us to re-enable support for partitionless disk setups.
mkdir -p /foo/bar/baz will mkdir each path component and ignore EEXIST.
The NOCACHE lookup will make the namecache unnecessarily evict the existing entry,
and then fallback to the fs lookup routine eventually leading namei to return an
error as the directory is already there.
For invocations like mkdir -p /usr/obj/usr/src/sys/GENERIC/modules this triggers
fallbacks to the slowpath for concurrently executing lookups.
Tested by: pho
Discussed with: kib
pagezero(). Ultimately, they use the same method for bulk zeroing, but
the generality of bzero() requires size and alignment checks that
pagezero() does not.
Eliminate an unnecessary #include.
Reviewed by: emaste, markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D26876
the failover protocol is supported due to limitations in the IPoIB
architecture. Refer to the lagg(4) manual page for how to configure
and use this new feature. A new network interface type,
IFT_INFINIBANDLAG, has been added, similar to the existing
IFT_IEEE8023ADLAG .
ifconfig(8) has been updated to accept a new laggtype argument when
creating lagg(4) network interfaces. This new argument is used to
distinguish between ethernet and infiniband type of lagg(4) network
interface. The laggtype argument is optional and defaults to
ethernet. The lagg(4) command line syntax is backwards compatible.
Differential Revision: https://reviews.freebsd.org/D26254
Reviewed by: melifaro@
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
Size of the per-process semaphore undo structure (semusz) depends on
the number of the per-process undos. If kern.ipc.semume is adjusted,
semusz must be adjusted as well, and it makes no sense to delegate
adjustment to user. Make it automatic.
Reported and tested by: Olef <o.vandestadt@gmail.com>
PR: 250361
Reviewed by: jhb, markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D26826
The firmware can allocate ingress and egress context ids anywhere from
its configured range. Size the iq/eq maps to match the entire range
instead of assuming that the firmware always allocates the first
available context id.
Reported by: Baptiste Wicht @ Verisign
MFC after: 1 week
Sponsored by: Chelsio Communications
Use ELR register value instead of LR for PMC_TRAPFRAME_TO_PC macro since
it's the former that indicates PC if the interrupted execution thread.
This fixes a bug where pmcstat lost the leaf function of the call chain
and started with the second function in the chain.
Although this change is an improvement over the previous logic there is still
posibility for incomplete data: if the leaf function does not have stack
variables and does not call any other functions compiler would not generate
a stack frame for it and the FP value would point to the caller's frame, so
instead of the actual "caller1 -> caller2 -> leaf" chain only
"caller1 -> leaf" would be captured.
Sponsored by: Ampere Computing
Submitted by: Klara, Inc.
Add missing break to prevent falling through to the default case statement
and returning EINVAL for all session configs.
Sponsored by: Ampere Computing
Submitted by: Klara, Inc.
802.1ad interfaces are created with ifconfig using the "vlanproto" parameter.
Eg., the following creates a 802.1Q VLAN (id #42) over a 802.1ad S-VLAN
(id #5) over a physical Ethernet interface (em0).
ifconfig vlan5 create vlandev em0 vlan 5 vlanproto 802.1ad up
ifconfig vlan42 create vlandev vlan5 vlan 42 inet 10.5.42.1/24
VLAN_MTU, VLAN_HWCSUM and VLAN_TSO capabilities should be properly
supported. VLAN_HWTAGGING is only partially supported, as there is
currently no IFCAP_VLAN_* denoting the possibility to set the VLAN
EtherType to anything else than 0x8100 (802.1ad uses 0x88A8).
Submitted by: Olivier Piras
Sponsored by: RG Nets
Differential Revision: https://reviews.freebsd.org/D26436
ubuf buffer is too small. It should be 18 if a NULL is not needed,
or 19 to hold the NULL terminator for the full 64-BIT value plus
the 0x prefix.
Submitted by: bret_ketchum@dell.com
Reviewed by: markj mav
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D26893
Add a small example.
Cross reference clean up for colcrt, nroff and tbl.
Reviewed by: gbe@, bcr@
Approved by: gbe@
Differential Revision: https://reviews.freebsd.org/D26864
Instead, add arguments to vmapbuf. Since this argument is
always a pointer use a type of void * and cast to vm_offset_t in
vmapbuf. (In CheriBSD we've altered vm_fault_quick_hold_pages to
take a pointer and check its bounds.)
In no other situtation does b_data contain a user pointer and vmapbuf
replaces b_data with the actual mapping.
Suggested by: jhb
Reviewed by: imp, jhb
Obtained from: CheriBSD
MFC after: 1 week
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D26784
It helps to reduce complexity with debugging of large ipfw rulesets.
Also define several constants and translators, that can by used by
dtrace scripts with this probe.
Reviewed by: gnn
Obtained from: Yandex LLC
MFC after: 2 weeks
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D26879
Move list_cloners() from ifconfig(8) to libifconfig(3) where it can be
reused by other consumers.
Reviewed by: kp
Differential Revision: https://reviews.freebsd.org/D26858
Improve the code reconstructing en_tw in struct fpreg32 from FXSAVE
results so that all register states are indicated correctly. The
previous code unconditionally mapped non-empty register state to
'normalized value' constant. The new code explicitly distinguishes
the 'zero value' and 'special value' constants as well. This improves
consistency between real FSAVE and translation from FXSAVE, and
ensures that tests using PT_GETFPREGS can rely on a single correct
value independently of the underlying implementation.
PR: 250454
Sponsored by: The FreeBSD Foundation
Obtained from: Moritz Systems
Submitted by: Michał Górny <mgorny@moritz.systems>
Discussed with: emaste
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D26856
- Remove "opt_geom.h", no kernel options are used.
- Remove <sys/sysctl.h>, no sysctl functionality is used here.
- Remove <sys/bio.h>, requirements for bio moved out in r112534.
- Remove <sys/lock.h> and <sys/mutex.h>, last used by DROP_GIANT() and
PICKUP_GIANT(), which were removed in r115624.
- Remove <sys/disk.h> and <sys/kernel.h>, not used.
Reviewed by: phk, kevans (mentor)
Approved by: phk, kevans (mentor)
Differential Revision: https://reviews.freebsd.org/D26805
Currently, this supports SHA1 and SHA2-{224,256,384,512} both as plain
hashes and in HMAC mode on both amd64 and i386. It uses the SHA
intrinsics when present similar to aesni(4), but uses SSE/AVX
instructions when they are not.
Note that some files from OpenSSL that normally wrap the assembly
routines have been adapted to export methods usable by 'struct
auth_xform' as is used by existing software crypto routines.
Reviewed by: gallatin, jkim, delphij, gnn
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D26821
Steam's Anti-Cheat might depend on it.
PR: 248223
Analyzed by: Alex S <iwtcex@gmail.com>
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26816
This uses the .incbin directive to pull in the MFS image contents.
Using assembly directly ensures that symbols can be defined with the
name and properties (such as .size) desired without having to rename
symbols, etc. via a second objcopy invocation. Since it is compiled
by the C compiler driver, it also avoids the need for all of the
EMBEDFS* make variables.
Suggested by: jrtc27
Reviewed by: kib, markj
Obtained from: CheriBSD
MFC after: 2 weeks
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D26781
- Hide ptsname_r under __BSD_VISIBLE for now as the specification
is not finalized at this time.
- Keep Symbol.map sorted.
- Avoid the interposing of ptsname_r(3) from an user application
from breaking ptsname(3) by making the implementation a static
method and call the static function from ptsname(3) instead.
Reported by: kib
Reviewed by: kib, jilles
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D26845
Some controllers use PCI function 1 as the requester ID for DMA transfers,
but the controllers are not PCI multifunction.
Set the iommu buswide flag for them. This should instruct an IOMMU driver
to use the same translation rule for all the devices and functions of
a bus.
This was discovered on the ARM Neoverse N1 System Development Platform
(ARM N1SDP).
Bug reference: https://bugzilla.kernel.org/show_bug.cgi?id=42679
Reported by: andrew
Reviewed by: kib, mav
Sponsored by: Innovate DSbD
Differential Revision: https://reviews.freebsd.org/D26857
