Since aarch64 is different, it needs a different smap. We first see if
we have the PA of the table from the FDT info. If so, we copy that and
quit. Otherwise, we do the best we can in translating the /proc/iomap
into EFI Memory Table format.
We also send the system table to the kernel.
Sponsored by: Netflix
Reviewed by: kevans
Differential Revision: https://reviews.freebsd.org/D38255
Copy the EFI memory tables we were able to get into the MODINFOMD_SMAP
metadata area for the kernel.
Sponsored by: Netflix
Reviewed by: tsoome, kevans
Differential Revision: https://reviews.freebsd.org/D38254
It's just a stub, since the kernel learns of memory via FDT.
Sponsored by: Netflix
Reviewed by: tsoome, kevans
Differential Revision: https://reviews.freebsd.org/D38253
Each architecture will soon be required to provide this to load memory
maps as metadata for the platforms that require it (or a stub function
for those that don't).
Sponsored by: Netflix
Reviewed by: tsoome, kevans
Differential Revision: https://reviews.freebsd.org/D38252
Now that all architectures provide this, enumerate the platform's memory
before we go to interact(). This needs to be done only once, but relies
on our ability to open host: files on some platforms, so it needs to be
done after devinit().
Sponsored by: Netflix
Reviewed by: tsoome, kevans
Differential Revision: https://reviews.freebsd.org/D38251
Move memory enumeration to the enumerate_memory_arch(), tweak the code a
bit to make that fit into that framework.
Also fix a bug in the name of the end location. The old code never found
memory (though amd64 doesn't yet work, this lead to using fallback
addresses that were good enough for QEMU...).
Sponsored by: Netflix
Reviewed by: kevans
Differential Revision: https://reviews.freebsd.org/D38250
We have an odd situation with aarch64 memory enumeration. The fdt that
we can get has a PA of the UEFI memory map, as modified by the current
running Linux kernel so it can retain those pages it needs for EFI and
other services. We have to pass in this EFI tablem but don't have access
to it in the boot loader. We do in the trampoline code, so a forthcoming
commit will copy it there for the kernel to use. All for want of /dev/mem
in the target environment sometimes.
However, we also have to find a place to load the kernel, so we have to
fallback to /proc/iomem when we can't read the UEFI memory map directly
from /dev/mem. It will give us good enough results to do this task. This
table isn't quite suitable to be converted to the EFI table, so we use
both methods. We'll fall back to this method also if there's no EFI
table advertised in the fdt. There's no /sys file on aarch64 that has
this information, hence using the old-style /proc/iomem. We're unlikely
to work if there's no EFI, though.
Note: The underlying Linux mechanism is different than the amd64 method
which seems like it should be MI, but unimplemented on aarch64.
Sponsored by: Netflix
Discussed with: kevans
Differential Revision: https://reviews.freebsd.org/D38249
Add stub for new MI interface for enumerating memory. Right now powerpc
looks in the FDT table at a later point in boot since we don't need to
pass a specific memory table to the kernel. Leave it like that for now,
but note plans for the future.
Sponsored by: Netflix
Reviewed by: kevans
Differential Revision: https://reviews.freebsd.org/D38248
We'll be using this code for most / all of the platforms since iomem is
the only interface that can tell us of the reserved to the linux kernel
areas that we cannot place the new kernel into, but that we are free to
use once we hit trampoline. aarch64 will use this shortly, and similar
code in amd64 will be refactored when I make that platform work.
Sponsored by: Netflix
Reviewed by: tsoome
Differential Revision: https://reviews.freebsd.org/D38309
Create segment handling code up to the top level. Move it all into
seg.c, and make necessary adjustments for it being in a new file,
including inventing print_avail() and first_avail() to print the array
and find the first large enough memory hole. aarch64 will use this,
and I'll refactor the other platforms to use it as I make them work.
Sponsored by: Netflix
Discussed with: kevans
Differential Revision: https://reviews.freebsd.org/D38308
enumerate_memory_arch is called once early in kboot's startup to allow
us to discover the memory layout, reserved areas, etc of the system
memory. Add the MI interface part of this.
Sponsored by: Netflix
Reviewed by: tsoome, kevans
Differential Revision: https://reviews.freebsd.org/D38247
Guess where to boot from when bootdev= isn't on the command line or
other config. Search all the disks and partitions for one that looks
like it could be a boot partition (same as we do when probing
zpools). Return the first one we find.
Sponsored by: Netflix
Reviewed by: tsoome
Differential Revision: https://reviews.freebsd.org/D38319
* Fix includes in utils.c, cf. style(9).
* Fix type mismatch: readlink(2) returns ssize_t, not int.
* It is not necessary to set errno to 0 as fts_read(3) already does it.
MFC after: 1 week
Sponsored by: Klara, Inc.
Reviewed by: allanjude
Differential Revision: https://reviews.freebsd.org/D38369
Summary:
Migrate linprocfs to use the IfAPI interfaces instead of direct ifnet
accesses.
Reviewed by: dchagin
Sponsored by: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D38358
Summary:
Sometimes it's useful to iterate over all interfaces in the current
VNET, as the linuxulator does in several places.
Unlike other iterators in the IfAPI this propagates any error received
up to the caller, instead of returning a count.
Sponsored by: Juniper Networks, Inc.
Reviewed by: glebius, melifaro
Differential Revision: https://reviews.freebsd.org/D38348
Use serial port setup done by system firmware.
ARM64 Hyper-V does hung if we attempt to override the defaults,
therefore we should default to use settings from firmware.
Tested by: schakrabarti@microsoft.com
PR: 266248
MFC after: 1 week
mountd(8) basically does the following:
getmntinfo()
for each mount
delete_exports
using nmount(2) to do the creation/deletion of individual exports.
For prison0 (and for other prisons if enforce_statfs == 0) getmntinfo()
returns all mount points, including ones being used within other prisons.
This can cause confusion if the same file system is specified in the
exports(5) file for multiple prisons.
This patch adds a perminent identifier to each prison
and marks which prison did the exports in a field of
the mount structure called mnt_exjail. This field can
then be compared to the perminent identifier for the
prison that the thread's credentials is in.
Also required was a new function called prison_isalive_permid()
which returns if the prison is alive, so that the check can be
ignored for prisons that have been removed.
This prepares the system to allow mountd(8) to run in multiple
prisons, including prison0.
Future commits will complete the modifications to allow mountd(8)
to run in vnet prisons. Until then, these changes should not affect
semantics.
Reviewed by: markj
MFC after: 3 months
Differential Revision: https://reviews.freebsd.org/D38144
Turns out that the loadaddr interface is not sufficiently expressive to
do the loading we need to do. Instead, we'll emulate some of its
features with inline math in copyin/copyout.
Sponsored by: Netflix
Reviewed by: kevans
Differential Revision: https://reviews.freebsd.org/D38260
When converting from a Linux error to a FreeBSD errno, assert that the
value passed in is negative, as is Linux's custom.
Suggested by: brooks
Sponsored by: Netflix
Reviewed by: tsoome, brooks
Differential Revision: https://reviews.freebsd.org/D38357
To properly size segments, we have to know how much memory we have in
the system, as well as how much this process can allocate. Due to our
inability to overcommit, we need to know how much memory is
available. commit_limit is the grand total allowed. committed_as is the
current memory used. mem_avail is what Linux tells us is available. Find
these from /proc/meminfo. We'll use them later to allocate the biggest
possible segment sizes, but for now print the raw numbers.
Sponsored by: Netflix
Reviewed by: kevans (earlier version)
Differential Revision: https://reviews.freebsd.org/D38267
Translate the Linux error return from read to a FreeBSD errno. We use a
simplified translation: 1-34 are the same between the systems, so any of
those will be returned directly. All other errno map to EINVAL. This
will suffice for some code that reads /dev/mem in producing the right
diagnostic.
A fully generalized version is much harder. Linux has a number of errno
that don't translate well and has architecture dependent
encodings. Avoid this mess with a simple macro for now. Add comment
explaining why we use the simple method we do.
Sponsored by: Netflix
Reviewed by: kevans, andrew
Differential Revision: https://reviews.freebsd.org/D38265
The device name was totally wrong. It should be "/dev/mumble:" not just
"mumble".
Sponsored by: Netflix
Reviewed by: tsoome
Differential Revision: https://reviews.freebsd.org/D38318
We only need 64MB to read off ZFS pools. Since Linux doesn't do
ovecommit by default, the extra 64MB is 64MB less we can allocate for
things like RAM disks.
Sponsored by: Netflix
Reviewed by: kevans, andrew
Differential Revision: https://reviews.freebsd.org/D38268
We only use symidx on x86, so only compute it on x86 to fix a set but
not used warning on aarch64.
Sponsored by: Netflix
Reviewed by: kevans
Differential Revision: https://reviews.freebsd.org/D38246
Under the scenario with a packet with length of 67 bytes, a header length
using the default of 20 bytes and a TCP data offset (th_off) of 48 will
cause m_pullup() to fail to make sure bytes are arragned contiguously.
m_pullup() will free the mbuf chain and return a null. ipfilter stores
the resultant mbuf address (or the resulting NULL) in its fr_info_t
structure. Unfortuntely the eroneous packet is not flagged for drop.
This results in a kernel page fault at line 410 of sys/netinet/ip_fastfwd.c
as it tries to use a now previously freed, by m_pullup(), mbuf.
PR: 266442
Reported by: Robert Morris <rtm@lcs.mit.edu>
MFC after: 1 week
timeout(1) is used by /etc/rc.d/zfskeys. Unfortunately, having
timeout(1) installed in /usr/bin causes problems when /usr is an
encrypted ZFS partition.
Implementing timeout(1) in sh(1) is not trivial. A more elegant solution
is to move timeout(1) to /bin so that it is available to early services
in the boot process.
PR: 265221
Reviewed by: allanjude, des, imp
Approved by: allanjude, des, imp
Reported by: Ivan <r4@sovserv.ru>
Fixes: 33ff39796f Add zfskeys rc.d script for auto-loading encryption keys
MFC after: 1 week
Relnotes: yes
Sponsored by: Modirum MDPay
Sponsored by: Klara Inc.
Differential Revision: https://reviews.freebsd.org/D38344
ld.bfd requires libraries to be linked in order. libssl requires
libcrypto. libfetch requires libssl. To fix the latter, move fetch
up above tar rather than listing the ssl libraries twice.
Reviewed by: delphij
Fixes: ea34aa4780 rescue: Add fetch(1) to the rescue tool.
Differential Revision: https://reviews.freebsd.org/D38304
When handling userspace exceptions on arm64 we need to dereference the
current thread pointer. If this is being promoted/demoted there is a
small window where it will cause another exception to be hit. As this
second exception will set the fault address register we will read the
incorrect value in the userspace exception handler.
Fix this be always reading the fault address before dereferencing the
current thread pointer.
Reported by: olivier@
Reviewed by: markj
Sponsored by: Arm Ltd
Differential Revision: https://reviews.freebsd.org/D38196
Only disable the Arm generic timer on arm64 when entering the kernel
through EL2. There is no guarantee it will be enabled if we are running
under a hypervisor.
Sponsored by: Arm Ltd
