NFSv3's ReaddirPlus and NFSv4's Readdir operations. The code
checked for a zero argument, but did not check for a very large value.
This patch clips dircount at the server's maximum data size.
MFC after: 1 week
The code assumed that this would indicate a corrupted mbuf chain, but
it could simply be caused by bogus RPC message data.
This patch replaces the panic() with a printf() plus error return.
MFC after: 1 week
provide a _MEMMOVE extension of _MEMCPY that deals with overlap based on
the previous bcopy(9) implementation and use the former for bcopy(9) and
memmove(9). This addresses my D15374 review comment, avoiding extra MOVs
in case of memmove(9) and trashing the stack pointer.
Under some conditions pom would report "waning" and then "full", show
higher percentages than it should, and get confused by DST. Fix.
Before:
2018.01.30: The Moon is Waxing Gibbous (97% of Full)
2018.01.31: The Moon is Waning Gibbous (100% of Full)
2018.02.01: The Moon is Full
2018.02.02: The Moon is Waning Gibbous (98% of Full)
After:
2018.01.30: The Moon is Waxing Gibbous (96% of Full)
2018.01.31: The Moon is Waxing Gibbous (99% of Full)
2018.02.01: The Moon is Full
2018.02.02: The Moon is Waning Gibbous (97% of Full)
PR: 231705
Submitted by: Andrew Gierth
Approved by: allanjude (mentor)
MFC after: 2 weeks
Differential Revision: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=231705
The update of jemalloc to 5.1.0 exposed a cache syncing issue on a Freescale
e500 base system. There was already code in the FPU emulator to address
this, but it was limited to a single static variable, and did not attempt to
sync the cache. This pulls that out to the higher level program exception
handler, and syncs the cache.
If a SIGILL is hit a second time at the same address, it will be treated as
a real illegal instruction, and handled accordingly.
The rescue binary is built statically via the Makefile generated by
crunchgen, but that does not trigger other shared/static logic in
bsd.prog.mk - in particular disabling retpolineplt with static linking.
PR: 233336
Reported by: Charlie Li
Sponsored by: The FreeBSD Foundation
NYCBUG database.
We want to encourage our users to upload their dmesgs so that the project can
get a better insight into what kind of hardware is run on. This helps in making
data-driven decisions about i.e., platform and driver support.
Note that dmesgs may contain sensitive information like hardware serial numbers,
hence uploading them without review is discouraged.
Reviewed by: brooks, imp, allanjude
Approved by: allanjude
MFC after: 5 days
Differential Revision: https://reviews.freebsd.org/D17705
This patch utilizes the fixed_devclass attribute in order to make sure
other acpi devices with params don't get confused for an EC device.
The existing code assumes that acpi_ec_probe is only ever called with a
dereferencable acpi param. Aside from being incorrect because other
devices of ACPI_TYPE_DEVICE may be probed here which aren't ec devices,
(and they may have set acpi private data), it is even more nefarious if
another ACPI driver uses private data which is not dereferancable. This
will result in a pointer deref during boot and therefore boot failure.
On X86, as it stands today, no other devices actually do this (acpi_cpu
checks for PROCESSOR type devices) and so there is no issue. I ran into
this because I am adding such a device which gets probed before
acpi_ec_probe and sets private data. If ARM ever has an EC, I think
they'd run into this issue as well.
There have been several iterations of this patch. Earlier
iterations had ECDT enumerated ECs not call into the probe/attach
functions of this driver. This change was Suggested by: jhb@.
Reviewed by: jhb
Approved by: emaste (mentor)
Differential Revision: https://reviews.freebsd.org/D16635
That avoids a syscall - getpagesize(3) gets the value from the ELF
aux strings.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17989
Building libc WITH_BIND_NOW results in segfault at process start. For
now force BIND_NOW off until the root cause can be identified and fixed.
PR: 233333
Sponsored by: The FreeBSD Foundation
Some external tools like tcpdump(1) have upstream the changes with old limits
name. Because of that provide compatibility with the old names.
Reported by: emaste
Observed in a CI test image, bectl_create test will run and be marked as
skipped because the module is not loaded. The first zpool invocation will
automagically load the module, but bectl_create is still skipped. Subsequent
tests all pass as expected because the module is now loaded and everything
is OK.
MFC after: 3 days
If rootfs isn't ZFS, current version will emit an error claiming so and fail
to initialize libbe. As a consumer, bectl -r (undocumented) can be specified
to operate on a BE independently of whether on a UFS or ZFS root.
Unbreak this for the UFS case by only erroring out the init if we can't
determine a ZFS dataset for rootfs and no BE root was specified. Consumers
of libbe should take care to ensure that rootfs is non-empty if they're
trying to use it, because this could certainly be the case.
Some check is needed before zfs_path_to_zhandle because it will
unconditionally emit to stderr if the path isn't a ZFS filesystem, which is
unhelpful for our purposes.
This should also unbreak the bectl(8) tests on a UFS root, as is the case in
Jenkins' -test runs.
MFC after: 3 days
Enable evdev on ppc64 as well, similar to what was done for amd64 and i386
in r340387.
Evdev can be used by X and is used by wayland to handle input devices.
Approved by: mmacy
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D18026
Instead of calling m_append with a user address, allocate an mbuf cluster
and copy data into it using copyin. For the SCM_CREDS case, instead of
zeroing a stack variable and appending that to the mbuf, zero part of the
mbuf cluster directly. One mbuf cluster is also the size limit used by
the FreeBSD sendmsg syscall (uipc_syscalls.c:sockargs()).
PR: 217901
Reviewed by: kib
MFC after: 3 days
There may be cases where cpu_model[] may not be 32bit aligned, so it is
better to not try to access it as such in order to avoid unaligned access.
Sponsored by: Smartcom - Bulgaria AD
First pass of support for multiple GIC ITS blocks with ACPI.
Changes are to:
* register the correct subset of interrupts with pic_register
in case of ACPI.
* initialize just the cpu interface for the first ITS, when
domain information is not avialable. This has to be done
until we split the per-CPU init to do LPI setup just once.
* remove duplicate check for the GIC ITS domain, the sc_cpus
are setup from domain, so the check again in per-CPU init
seems unnecessary.
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D17841
Now that the ACPI and FDT implementations for activating and
deactivating resources are the same, we can move it to
pci_host_generic.c. No functional changes.
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D17793
Now that we are handling PCI resources in pci_host_generic_acpi.c, we
don't need these change (made by r336129)
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D17792
This is a major update for pci_host_generic_acpi.c, the current
implementation has some gaps that are better fixed up in one go.
The changes are to:
* Follow x86 method of not adding PCI resources to PCI host bridge in
ACPI code. This has been moved to pci_host_generic_acpi.c, where we
walk thru its resources of the host bridge and add them.
* Fixup code in pci_host_generic_acpi.c to read all decoded ranges
and update the 'ranges' property. This allows us to share most of
the code with generic implementation (and the FDT one).
* Parse and setup IO ranges and bus ranges when walking the resources
above. Drop most of the changes related to this from acpica code.
* Add the ECAM memory area as mem resource 0. Implement the logic to
get the ECAM area from MCFG (using bus range which we now decode),
or from _CBA (using _BBN/bus range). Drop aarch64 ifdefs from acpica
code which did part of this.
* Switch resource activation to similar code as FDT implementation,
this can be moved into generic implementation in a later pass.
* Drop the mechanism of using the 7th bit of bus number as the domain,
this is not correct and will work only in very specific cases. Use
_SEG as PCI domain and use the bus ranges of the host bridge to
provide start bus number.
This commit should not make any functional change to dev/acpica/acpi.c
for other architectures, almost all the changes there are to revert
earlier additions in this file done for aarch64.
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D17791
On arm64 (where INTRNG is enabled), the interrupts have to be mapped
with ACPI_BUS_MAP_INTR() before adding them as resources to devices.
The earlier code did the mapping before calling acpi_set_resource(),
which bypassed code that checked for PCI link interrupts.
To fix this, move the call to map interrupts into acpi_set_resource()
and that requires additional work to lookup interrupt properties.
The changes here are to:
* extend acpi_lookup_irq_handler() to lookup an irq in the ACPI
resources
* create a helper function acpi_map_intr() which uses the updated
acpi_lookup_irq_handler() to look up an irq, and then map it
with ACPI_BUS_MAP_INTR()
* use acpi_map_intr() in acpi_pcib_route_interrupt() to map
pci link interrupts.
With these changes, we can drop the ifdefs in acpi_resource.c, and
we can also drop the call for mapping interrupts in generic_timer.c
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D17790
Both ACPI and FDT support bus ranges for pci host bridges. Update
pci_host_generic*.[ch] with a default implementation to support this.
This will be used in the next set of changes for ACPI based host
bridge. No functional changes in this commit.
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D17657
Fix up pci_host_generic.c and pci_host_generic_fdt.c to allocate
resources against devices that requested them. Currently the
allocation happens against the pcib, which is incorrect.
This is needed for the upcoming changes for fixing up
pci_host_generic_acpi.c
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D17656
The current quirk implementation writes a fixed address to the PCI BAR
to fix a firmware bug. The PCI BARs are allocated by firmware and will
change depending on PCI devices present. So using a fixed address here
is not correct.
This quirk worked around a firmware bug that programmed the MSI-X bar
of the SATA controller incorrectly. The newer firmware does not have
this issue, so it is better to drop this quirk altogether.
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D17655
These tests operate on a file-backed zpool that gets created in the kyua
temp dir. root and ZFS support are both required for these tests. Current
tests cover create, destroy, export/import, jail, list (kind of), mount,
rename, and jail.
List tests should later be extended to cover formatting and the different
list flags, but for now only covers basic "are create/destroy actually
reflected properly"
MFC after: 3 days
Previously we would blindly copy the 'mountpoint' property, which includes
the altroot. The altroot needs to be snipped off prior to setting it on the
new BE, though, or you'll end up with a new BE and a mountpoint of /mnt with
altroot=/mnt
MFC after: 3 days
Add an undocumented -r option preceding the bectl subcommand to specify a BE
root to operate out of. This will remain undocumented for now, as some
caveats apply:
- BEs cannot be activated in the pool that doesn't contain the rootfs
- bectl create cannot work out of the box without the -e option right now,
since it defaults to the rootfs and cross-pool cloning doesn't work like
that (IIRC)
Plumb the BE root through to libbe(3) so that some things -can- be done to
it, e.g.
bectl -r tank/ROOT create -e default upgrade
bectl -r tank/ROOT mount upgrade /mnt
this aides in some upgrade setups where rootfs is not necessarily ZFS, and
also makes it easier/possible to regression-test bectl when combined with a
file-backed zpool.
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D18029
As of r340465 all consumers use sbsndptr_adv and sbsndptr_noadv
Reviewed by: gallatin
Approved by: krion (mentor)
Differential Revision: https://reviews.freebsd.org/D17998
Without this change I got the following error:
clang-7: error: no such file or directory: '..../lib/libc/amd64/string/bzero.S'
Reviewed By: mjg
Differential Revision: https://reviews.freebsd.org/D18031
Rather than using a special value to denote "use the default router",
treat the absence of the -g option to mean the same thing. The
in-kernel netdump client will always attempt to reach the server
directly before falling back to the configured gateway anyway. This
change makes it cleaner to support a hostname value for -g.
Reviewed by: cem
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D18025
functions. Notably, reflow the text of some comments so that they
occupy fewer lines, and introduce an assertion in one of the new
helper functions so that it is not misused by a future caller.
In collaboration with: Doug Moore <dougm@rice.edu>
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D17635
Go through the ZFS layer instead; given a BE, we can derive the dataset,
zfs_open it, then zfs_unmount. ZFS takes care of the dirty details and
likely gets it more correct than we did for more interesting setups.
MFC after: 3 days
libbe(3) currently uses zfs_be_root and locates which of its children is
currently mounted at "/". This is reasonable, but not correct in the case of
a chroot, for two reasons:
- chroot root may be of a different zpool than zfs_be_root
- chroot root will not show up as mounted at "/"
Fix both of these by rewriting libbe_init to work from the rootfs down.
zfs_path_to_zhandle on / will resolve to the dataset mounted at the new
root, rather than the real root. From there, we can derive the BE root/pool
and grab the bootfs off of the new pool. This does no harm in the average
case, and opens up bectl to operating on different pools for scenarios where
one may be, for instance, updating a pool that generally gets re-rooted into
from a separate UFS root or zfs bootpool.
While here, I've also:
- Eliminated the check for /boot and / to be on the same partition. This
leaves one open to a setup where /boot (and consequently, kernel/modules)
are not included in the boot environment. This may very well be an
intentional setup done by someone that knows what they're doing, we should
not kill BE usage because of it.
- Eliminated the validation bits of BEs and snapshots that enforced
'mountpoint' to be "/" -- this broke when trying to operate on an imported
pool with an altroot, but we need not be this picky.
Reported by: philip
Reviewed by: philip, allanjude (previous version)
Tested by: philip
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D18012
transfer mode only (lost with r321385). [1]
- Similarly, don't try to set the power class on MMC devices that comply
to version 4.0 of the system specification but are operated in default/
legacy transfer or 1-bit bus mode as no power class is specified for
these cases. Trying to set a power class nevertheless resulted in an -
albeit harmless - error message.
PR: 231713 [1]
