from the vimage project, as per plan established at devsummit 08/08:
http://wiki.freebsd.org/Image/Notes200808DevSummit
Introduce INIT_VNET_*() initializer macros, VNET_FOREACH() iterator
macros, and CURVNET_SET() context setting macros, all currently
resolving to NOPs.
Prepare for virtualization of selected SYSCTL objects by introducing a
family of SYSCTL_V_*() macros, currently resolving to their global
counterparts, i.e. SYSCTL_V_INT() == SYSCTL_INT().
Move selected #defines from sys/sys/vimage.h to newly introduced header
files specific to virtualized subsystems (sys/net/vnet.h,
sys/netinet/vinet.h etc.).
All the changes are verified to have zero functional impact at this
point in time by doing MD5 comparision between pre- and post-change
object files(*).
(*) netipsec/keysock.c did not validate depending on compile time options.
Implemented by: julian, bz, brooks, zec
Reviewed by: julian, bz, brooks, kris, rwatson, ...
Approved by: julian (mentor)
Obtained from: //depot/projects/vimage-commit2/...
X-MFC after: never
Sponsored by: NLnet Foundation, The FreeBSD Foundation
After I removed all the unit2minor()/minor2unit() calls from the kernel
yesterday, I realised calling minor() everywhere is quite confusing.
Character devices now only have the ability to store a unit number, not
a minor number. Remove the confusion by using dev2unit() everywhere.
This commit could also be considered as a bug fix. A lot of drivers call
minor(), while they should actually be calling dev2unit(). In -CURRENT
this isn't a problem, but it turns out we never had any problem reports
related to that issue in the past. I suspect not many people connect
more than 256 pieces of the same hardware.
Reviewed by: kib
When I changed kern_conf.c three months ago I made device unit numbers
equal to (unneeded) device minor numbers. We used to require
bitshifting, because there were eight bits in the middle that were
reserved for a device major number. Not very long after I turned
dev2unit(), minor(), unit2minor() and minor2unit() into macro's.
The unit2minor() and minor2unit() macro's were no-ops.
We'd better not remove these four macro's from the kernel, because there
is a lot of (external) code that may still depend on them. For now it's
harmless to remove all invocations of unit2minor() and minor2unit().
Reviewed by: kib
ng_apply_item(). There are possible (and I have got one) use-after-free
class panics because of it.
If hook is specified, require it to be valid at the apply time. The only
exceptions are the internal ng_con_part2(), ng_con_part3() and
ng_rmhook_part2() functions which are specially made to work with invalid
hooks.
virtualization work done by Marko Zec (zec@).
This is the first in a series of commits over the course
of the next few weeks.
Mark all uses of global variables to be virtualized
with a V_ prefix.
Use macros to map them back to their global names for
now, so this is a NOP change only.
We hope to have caught at least 85-90% of what is needed
so we do not invalidate a lot of outstanding patches again.
Obtained from: //depot/projects/vimage-commit2/...
Reviewed by: brooks, des, ed, mav, julian,
jamie, kris, rwatson, zec, ...
(various people I forgot, different versions)
md5 (with a bit of help)
Sponsored by: NLnet Foundation, The FreeBSD Foundation
X-MFC after: never
V_Commit_Message_Reviewed_By: more people than the patch
USB isochronous transfer support is required for Bluetooth SCO.
While i'm here change u_int to uint and update TODO.
This should produce no visible changes unless the device is
broken (or really old).
MFC after: 3 months
dispatched without Giant, and add NETISR_FORCEQUEUE, which allows specific
netisr handlers to always be dispatched via a queue (deferred). Mark the
usb and if_ppp netisr handlers as NETISR_FORCEQUEUE, and explicitly
acquire Giant in those handlers.
Previously, any netisr handler not marked NETISR_MPSAFE would necessarily
run deferred and with Giant acquired. This change removes Giant
scaffolding from the netisr infrastructure, but NETISR_FORCEQUEUE allows
non-MPSAFE handlers to continue to force deferred dispatch so as to avoid
lock order reversals between their acqusition of Giant and any calling
context.
It is likely we will be able to remove NETISR_FORCEQUEUE once
IFF_NEEDSGIANT is removed, as non-MPSAFE usb and if_ppp drivers will no
longer be supported.
Reviewed by: bz
MFC after: 1 month
X-MFC note: We can't remove NETISR_MPSAFE from stable/7 for KPI reasons,
but the rest can go back.
NET_NEEDS_GIANT. netatm has been disconnected from the build for ten
months in HEAD/RELENG_7. Specifics:
- netatm include files
- netatm command line management tools
- libatm
- ATM parts in rescue and sysinstall
- sample configuration files and documents
- kernel support as a module or in NOTES
- netgraph wrapper nodes for netatm
- ctags data for netatm.
- netatm-specific device drivers.
MFC after: 3 weeks
Reviewed by: bz
Discussed with: bms, bz, harti
This particular implementation is designed to be fully backwards compatible
and to be MFC-able to 7.x (and 6.x)
Currently the only protocol that can make use of the multiple tables is IPv4
Similar functionality exists in OpenBSD and Linux.
From my notes:
-----
One thing where FreeBSD has been falling behind, and which by chance I
have some time to work on is "policy based routing", which allows
different
packet streams to be routed by more than just the destination address.
Constraints:
------------
I want to make some form of this available in the 6.x tree
(and by extension 7.x) , but FreeBSD in general needs it so I might as
well do it in -current and back port the portions I need.
One of the ways that this can be done is to have the ability to
instantiate multiple kernel routing tables (which I will now
refer to as "Forwarding Information Bases" or "FIBs" for political
correctness reasons). Which FIB a particular packet uses to make
the next hop decision can be decided by a number of mechanisms.
The policies these mechanisms implement are the "Policies" referred
to in "Policy based routing".
One of the constraints I have if I try to back port this work to
6.x is that it must be implemented as a EXTENSION to the existing
ABIs in 6.x so that third party applications do not need to be
recompiled in timespan of the branch.
This first version will not have some of the bells and whistles that
will come with later versions. It will, for example, be limited to 16
tables in the first commit.
Implementation method, Compatible version. (part 1)
-------------------------------
For this reason I have implemented a "sufficient subset" of a
multiple routing table solution in Perforce, and back-ported it
to 6.x. (also in Perforce though not always caught up with what I
have done in -current/P4). The subset allows a number of FIBs
to be defined at compile time (8 is sufficient for my purposes in 6.x)
and implements the changes needed to allow IPV4 to use them. I have not
done the changes for ipv6 simply because I do not need it, and I do not
have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it.
Other protocol families are left untouched and should there be
users with proprietary protocol families, they should continue to work
and be oblivious to the existence of the extra FIBs.
To understand how this is done, one must know that the current FIB
code starts everything off with a single dimensional array of
pointers to FIB head structures (One per protocol family), each of
which in turn points to the trie of routes available to that family.
The basic change in the ABI compatible version of the change is to
extent that array to be a 2 dimensional array, so that
instead of protocol family X looking at rt_tables[X] for the
table it needs, it looks at rt_tables[Y][X] when for all
protocol families except ipv4 Y is always 0.
Code that is unaware of the change always just sees the first row
of the table, which of course looks just like the one dimensional
array that existed before.
The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign()
are all maintained, but refer only to the first row of the array,
so that existing callers in proprietary protocols can continue to
do the "right thing".
Some new entry points are added, for the exclusive use of ipv4 code
called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(),
which have an extra argument which refers the code to the correct row.
In addition, there are some new entry points (currently called
rtalloc_fib() and friends) that check the Address family being
looked up and call either rtalloc() (and friends) if the protocol
is not IPv4 forcing the action to row 0 or to the appropriate row
if it IS IPv4 (and that info is available). These are for calling
from code that is not specific to any particular protocol. The way
these are implemented would change in the non ABI preserving code
to be added later.
One feature of the first version of the code is that for ipv4,
the interface routes show up automatically on all the FIBs, so
that no matter what FIB you select you always have the basic
direct attached hosts available to you. (rtinit() does this
automatically).
You CAN delete an interface route from one FIB should you want
to but by default it's there. ARP information is also available
in each FIB. It's assumed that the same machine would have the
same MAC address, regardless of which FIB you are using to get
to it.
This brings us as to how the correct FIB is selected for an outgoing
IPV4 packet.
Firstly, all packets have a FIB associated with them. if nothing
has been done to change it, it will be FIB 0. The FIB is changed
in the following ways.
Packets fall into one of a number of classes.
1/ locally generated packets, coming from a socket/PCB.
Such packets select a FIB from a number associated with the
socket/PCB. This in turn is inherited from the process,
but can be changed by a socket option. The process in turn
inherits it on fork. I have written a utility call setfib
that acts a bit like nice..
setfib -3 ping target.example.com # will use fib 3 for ping.
It is an obvious extension to make it a property of a jail
but I have not done so. It can be achieved by combining the setfib and
jail commands.
2/ packets received on an interface for forwarding.
By default these packets would use table 0,
(or possibly a number settable in a sysctl(not yet)).
but prior to routing the firewall can inspect them (see below).
(possibly in the future you may be able to associate a FIB
with packets received on an interface.. An ifconfig arg, but not yet.)
3/ packets inspected by a packet classifier, which can arbitrarily
associate a fib with it on a packet by packet basis.
A fib assigned to a packet by a packet classifier
(such as ipfw) would over-ride a fib associated by
a more default source. (such as cases 1 or 2).
4/ a tcp listen socket associated with a fib will generate
accept sockets that are associated with that same fib.
5/ Packets generated in response to some other packet (e.g. reset
or icmp packets). These should use the FIB associated with the
packet being reponded to.
6/ Packets generated during encapsulation.
gif, tun and other tunnel interfaces will encapsulate using the FIB
that was in effect withthe proces that set up the tunnel.
thus setfib 1 ifconfig gif0 [tunnel instructions]
will set the fib for the tunnel to use to be fib 1.
Routing messages would be associated with their
process, and thus select one FIB or another.
messages from the kernel would be associated with the fib they
refer to and would only be received by a routing socket associated
with that fib. (not yet implemented)
In addition Netstat has been edited to be able to cope with the
fact that the array is now 2 dimensional. (It looks in system
memory using libkvm (!)). Old versions of netstat see only the first FIB.
In addition two sysctls are added to give:
a) the number of FIBs compiled in (active)
b) the default FIB of the calling process.
Early testing experience:
-------------------------
Basically our (IronPort's) appliance does this functionality already
using ipfw fwd but that method has some drawbacks.
For example,
It can't fully simulate a routing table because it can't influence the
socket's choice of local address when a connect() is done.
Testing during the generating of these changes has been
remarkably smooth so far. Multiple tables have co-existed
with no notable side effects, and packets have been routes
accordingly.
ipfw has grown 2 new keywords:
setfib N ip from anay to any
count ip from any to any fib N
In pf there seems to be a requirement to be able to give symbolic names to the
fibs but I do not have that capacity. I am not sure if it is required.
SCTP has interestingly enough built in support for this, called VRFs
in Cisco parlance. it will be interesting to see how that handles it
when it suddenly actually does something.
Where to next:
--------------------
After committing the ABI compatible version and MFCing it, I'd
like to proceed in a forward direction in -current. this will
result in some roto-tilling in the routing code.
Firstly: the current code's idea of having a separate tree per
protocol family, all of the same format, and pointed to by the
1 dimensional array is a bit silly. Especially when one considers that
there is code that makes assumptions about every protocol having the
same internal structures there. Some protocols don't WANT that
sort of structure. (for example the whole idea of a netmask is foreign
to appletalk). This needs to be made opaque to the external code.
My suggested first change is to add routing method pointers to the
'domain' structure, along with information pointing the data.
instead of having an array of pointers to uniform structures,
there would be an array pointing to the 'domain' structures
for each protocol address domain (protocol family),
and the methods this reached would be called. The methods would have
an argument that gives FIB number, but the protocol would be free
to ignore it.
When the ABI can be changed it raises the possibilty of the
addition of a fib entry into the "struct route". Currently,
the structure contains the sockaddr of the desination, and the resulting
fib entry. To make this work fully, one could add a fib number
so that given an address and a fib, one can find the third element, the
fib entry.
Interaction with the ARP layer/ LL layer would need to be
revisited as well. Qing Li has been working on this already.
This work was sponsored by Ironport Systems/Cisco
Reviewed by: several including rwatson, bz and mlair (parts each)
Obtained from: Ironport systems/Cisco
rev. 1.149 rework.
It allows to save several percents of CPU time on SMP by using UMA's
internal per-CPU allocation limits instead of own global variable
each time updated with atomics.
Tested with: Netperf cluster
- reorder structures fields (XX_refs) a bit to group fields modified
same time together. According to my tests it gives up to 10%
SMP performance benefit on real workload due to reduced inter-CPU
cache trashing.
- change q_flags from long to int as long is not really needed there and
it's usage with atomics is argued by some people.
- move NGF_WORKQ flag into the separate field q_flags2 as it protected by
queue mutex instead of node writer protection used by the rest of flags.
- move nd_work queue entry to ng_queue structure to which it is more
related and make it STAILQ instead of TAILQ as now it is a classic FIFO.
- remove q_node pointer from ng_queue structure as it is not really needed.
- reimplement item queue using STAILQ instead of own equal implementation.
As soon as BT subsystem has own item queues using ng_item.el_next update
it also.
- change depth field in ng_item from uintptr_t to u_int. It was made
uintptr_t to keep ABI compatibility.
Reviewed by: julian, emax
Tested with: Netperf cluster
- Do not check destination hook presence, it will be done by netgraph.
- Use u_int instead of int in some places to simplify type conversions.
- Use NG_SEND_DATA_ONLY() macro instead of selfmade equivalent.
will never exit ngintr(), while there is some ready requests on the queue.
It was made years ago with hope of parallel queue processing by several
net threads. But even if we have several threads sometimes, we have no
rights to process queue in parallel as it will break original requests
serialization that is critically important for some setups.
of pptpgre and ksocket nodes for all calls between two peers. This patch
modifies node's API by adding new "session_%04x" hook names support, while
keeping backward compatibility.
Together with appropriate user-level support (by latest mpd5) it gives
huge performance benefits for case of multiple active calls between
two peers because of avoiding data duplication and extra socket processing.
On my benchmarks I have got more then 10 times speedup for the 200
simultaneous PPTP calls between two peers.
In conclusion, it allows now to build effective "clients <=> PAC <=> PNS"
setups.
Before this patch callback returned result of the last finished call chain.
Now it returns last nonzero result from all call chain results in this request.
As soon as this improvement gives reliable error reporting, it is now possible
to remove dirty workaround in ng_socket, made to return ENOBUFS error statuses
of request-response operations. That workaround was responsible for returning
ENOBUFS errors to completely unrelated requests working at the same time
on socket.
if netgraph reported error while delivering to destination.
Reset 'next send' counter to the last requested by peer on ack timeout
to resend all subsequest packets after lost one again without additional hints.
trashing and improve performance.
Remove waitflag argument from ng_ksocket_incoming2(), it means nothing
as function call was queued by netgraph.
Remove node validity check, as node validity guarantied by netgraph.
Update comments.
to avoid terrible unpredicted effects for netgraph operation of their
exhaustion while allocating control messages.
Add separate configurable 512 items limit for data items allocation
for DoS/overload protection.
Discussed with: julian
- Introduce a finit() which is used to initailize the fields of struct file
in such a way that the ops vector is only valid after the data, type,
and flags are valid.
- Protect f_flag and f_count with atomic operations.
- Remove the global list of all files and associated accounting.
- Rewrite the unp garbage collection such that it no longer requires
the global list of all files and instead uses a list of all unp sockets.
- Mark sockets in the accept queue so we don't incorrectly gc them.
Tested by: kris, pho
argument. It allows ppp, mpd or any other node consumer to request
connection to specified access concentrator.
Proposed by: Alexander A. Burylov <burylov@mail.ru>
for that argument. This will allow DDB to detect the broad category of
reason why the debugger has been entered, which it can use for the
purposes of deciding which DDB script to run.
Assign approximate why values to all current consumers of the
kdb_enter() interface.
Previous value 16 was too small for real LAC as temporal activity
spike cound easily overflow queue demanding tunnel disconnection due
to possible state inconsistency.
removing some copy&pasted code.
- Reduce copy and paste in ng_apply_item().
- Resurrect ng_send_fn() as a valid symbol, not a define.
Reviewed by: mav, julian
zero (0). Actual RFCOMM channel will be assigned after listen(2)
call is done on a RFCOMM socket bound to a ''wildcard'' RFCOMM
channel zero (0).
Address locking issues in ng_btsocket_rfcomm_bind()
Submitted by: Heiko Wundram (Beenic) < wundram at beenic dot net >
MFC after: 1 week
When item forwarded refence counter is incremented, when item
processed, counter decremented. When counter reaches zero,
apply handler is getting called.
Now it allows to report right connect() call status from user-level
at the right time.
simplifies code and should speedup pppoe_findsession() function which is
called for every incoming packet.
Approved by: re (kensmith), glebius (mentor)
Without it some errors may left unnoticed and unhandeled
that will lead to hooks left in half-connected state.
Reviewed by: julian@
Approved by: re (kensmith), glebius (mentor)
previously conditionally acquired Giant based on debug.mpsafenet. As that
has now been removed, they are no longer required. Removing them
significantly simplifies error-handling in the socket layer, eliminated
quite a bit of unwinding of locking in error cases.
While here clean up the now unneeded opt_net.h, which previously was used
for the NET_WITH_GIANT kernel option. Clean up some related gotos for
consistency.
Reviewed by: bz, csjp
Tested by: kris
Approved by: re (kensmith)
64bit counters are needed to simplify traffic accounting and
reduce system load at the big PPP concentrators.
Approved by: re (rwatson), glebius (mentor)
Till now node's transmit path was completely unprotected
and so wasn't thread safe in multilink mode. It's receive path was
declared as WRITER as the simpliest protection method but it
reduces performance when compression or encryption enabled.
Approved by: re (rwatson), glebius (mentor)
stack overflow in complicated traffic filtering setups.
There can be minor performance degradation for the MHLEN < len <= 256 case
due to additional buffer allocation, but it is a rare case.
Approved by: re (rwatson), glebius (mentor)
MFC after: 1 week
sysctl_handle_int is not sizeof the int type you want to export.
The type must always be an int or an unsigned int.
Remove the instances where a sizeof(variable) is passed to stop
people accidently cut and pasting these examples.
In a few places this was sysctl_handle_int was being used on 64 bit
types, which would truncate the value to be exported. In these
cases use sysctl_handle_quad to export them and change the format
to Q so that sysctl(1) can still print them.
While ng_fec called the ioctl to let interfaces in the bundle know
the list of multicast addresses had changed, it never actually
updated that list on the interfaces in the bundle. Consequently,
the multicast filters could be programmed incorrectly.
if_lagg does this correctly, by maintaining a list of addresses
that it has added to interfaces in the bundle. This commit basically
takes the if_lagg code and adds it to ng_fec.
A version of this patch for RELENG_6 has fixed some problems with
IPv6 ND over ng_fec. This is probably the problem in PR 107523.
PR: 107523
Tested by: Rob Gallagher <robert.gallagher@heanet.ie>
Obtained from: if_lagg
MFC after: 3 weeks
protocol entry points using functions named proto_getsockaddr and
proto_getpeeraddr rather than proto_setsockaddr and proto_setpeeraddr.
While it's true that sockaddrs are allocated and set, the net effect is
to retrieve (get) the socket address or peer address from a socket, not
set it, so align names to that intent.
when one of links is inactive and have stale sequence number. To avoid
this sequence numbers of all links are getting updated on every
successful packet reassembling.
- ng_ppp_bump_mseq function created to simplify code.
- ng_ppp_frag_drop function separated from ng_ppp_frag_process to
simplify code.
Reviewed by: archie
Approved by: glebius (mentor)
which lead to ineffective multilink packet distribution plans.
- Changed bytesInQueue calculation math to have more precise information
about links utilization.
- Taken rough account of the link overhead. Better way to do it could be to
get exact overhead from user-level, but I have not done it to keep
binary compatibility.
Reviewed by: archie
Approved by: glebius (mentor)
for doing this job. This change will make it easy to migrate from using
spinning locks to adaptive ones.
Reviewed by: glebius, julian
Approved by: cognet (mentor)
This will increase the memory consumption for more than 1 Mb, but this
is required for operation on multiinterface access concentrators running
mpd.
Requested by: Alexander Motin
structures. Detect when ifnet instances are detached from the network
stack and perform appropriate cleanup to prevent memory leaks.
This has been implemented in such a way as to be backwards ABI compatible.
Kernel consumers are changed to use if_delmulti_ifma(); in_delmulti()
is unable to detect interface removal by design, as it performs searches
on structures which are removed with the interface.
With this architectural change, the panics FreeBSD users have experienced
with carp and pfsync should be resolved.
Obtained from: p4 branch bms_netdev
Reviewed by: andre
Sponsored by: Garance A Drosehn
Idea from: NetBSD
MFC after: 1 month
from whoever has dequeued the item from the queue. Generally they have
no interest in the result, and even if it is called by the queuer, it
should still pretend that it was queued. The queuer should be assuming
that the call was queued and giving them the false confidence that they
are getting status leads to hard to find bugs.
Make it a void and remove all the code that tried to return status through it.
to embed up to four counters in outgoing packets. The message specifies
the offset at which the counter should be inserted as well as the
parameters of the counter.
Example usage:
ngctl msg src0: setcounter \
'{ index=0 offset=0x40 flags=1 width=4 increment=1 max_val=12345 }'
Sponsored by: Sandvine Incorporated
to embed a timestamp (struct timeval) in outgoing packets. The message
specifies the offset at which the timestamp should be inserted.
NG_SOURCE(4) gives an example usage that queues an ICMP packet. Using that
example, the following command will insert a timestamp in the ICMP's data
payload:
ngctl msg src0: settimestamp '{ offset=0x2a flags=1 }'
Sponsored by: Sandvine Incorporated
addressing if a packet is later re-encapsulated and sent to a
non-broadcast, non-multicast destination after being received on the
ng_ksocket input hook.
PR: 106999
Submitted by: Kevin Lahey
MFC after: 4 weeks
Formulas described in RFC require high precision of floating point.
Formulas of integer math implemented in ng_pptpgre give mistake in range
of +0-7ms on RTT and +0-3ms on deviation. This leads to significant
underestimation of real packet RTT.
I have made a very simple patch to reduce mistake to +4-3ms on RTT and
+2-1ms on deviation. Mistake in RTT is not good, but gets covered by
deviation. To cover worst possible negative mistake in deviation I have
added 2ms to it. Also this 2 ms cover the case when measured deviation
is so small (about zero) that it can interfere with process scheduling
delays or weather on Mars.
My tests show decreasing of packet losses on 20ms RTT link from 2.5% to
0.3% while speed increased un 1/3.
Reviewed by: archie
with bypass header, to send it out to userland.
- Use ng_ppp_bypass() in ng_ppp_proto_recv().
- Use ng_ppp_bypass() in ng_ppp_comp_recv() and in
ng_ppp_crypt_recv() if compression or encryption is
disabled, respectively.
- Any LCP packet goes directly to ng_ppp_bypass(), instead
of passing through PPP stack.
- Any non-LCP packet on disabled link is discarded. This
is behavior defined in RFC.
Submitted by: Alexander Motin <mav alkar.net>
hooks get their per hook rcvdata methods, and all functions are organized
corresponding to protocol stack model.
Submitted by: Alexander Motin <mav alkar.net>
Reviewed by: archie, julian
semantics.
- Stop testing bpf pointers for NULL. In some cases use
bpf_peers_present() and then call the function directly inside the
conditional block instead of the macro.
- For places where the entire conditional block is the macro, remove the
test and make the macro unconditional.
- Use BPF_MTAP() in if_pfsync on FreeBSD instead of an expanded version of
the old semantics.
Reviewed by: csjp (older version)
node would send every outgoing frame to the "compress" hook.
Packets received on the "compress" hook were expected to be
compressed and PROT_COMPD tag was put on them unconditionally.
After this commit an alternative compression mode can be set.
In this mode the node doesn't put the PROT_COMPD, the compressor
should put it itself. This is important for such kind of
compressors, that can submit uncompressed frames.
Before this commit, if the decompression is enabled, the ng_ppp(4)
node would send and incoming frame to the "decompress" hook
only if it has the PROT_COMPD proto tag on it.
After this commit an alternative decompression mode can be set.
In this mode the node sends all the incoming packets to the
decompression hook. This is important for such kind of compressors
that need uncompressed packets too, to keep their library in sync.
These new features will be used in new version of mpd4, and in new
compressor nodes.
Submitted by: Alexander Motin <mav alkar.net>
specific privilege names to a broad range of privileges. These may
require some future tweaking.
Sponsored by: nCircle Network Security, Inc.
Obtained from: TrustedBSD Project
Discussed on: arch@
Reviewed (at least in part) by: mlaier, jmg, pjd, bde, ceri,
Alex Lyashkov <umka at sevcity dot net>,
Skip Ford <skip dot ford at verizon dot net>,
Antoine Brodin <antoine dot brodin at laposte dot net>
mbuf clusters. Add a flags parameter to accept M_PKTHDR and M_EOR mbuf
chain flags. Provide compatibility macro for m_getm() calling m_getm2()
with M_PKTHDR set.
Rewrite m_uiotombuf() to use m_getm2() for mbuf allocation and do the
uiomove() in a tight loop over the mbuf chain. Add a flags parameter to
accept mbuf flags to be passed to m_getm2(). Adjust all callers for the
extra parameter.
Sponsored by: TCP/IP Optimization Fundraise 2005
MFC after: 3 month
- Inline ship_msg() into ngs_rcvmsg().
- Plug memory leak in case if no control socket present.
- Remove malloc() and allocate the sockaddr on stack.
- style(9).
- Use malloc() and free() instead of MALLOC() and FREE() macros.
- Do not check malloc results if M_WAITOK was used.
- Remove linked list of all netgraph sockets. It isn't needed.
- Use ng_findhook() instead of searching the list ourselves.
- Use NG_WAITOK in syscalls.
- Remove unneeded includes.
- style(9)
m_pkthdr.ether_vlan. The presence of the M_VLANTAG flag on the mbuf
signifies the presence and validity of its content.
Drivers that support hardware VLAN tag stripping fill in the received
VLAN tag (containing both vlan and priority information) into the
ether_vtag mbuf packet header field:
m->m_pkthdr.ether_vtag = vlan_id; /* ntohs()? */
m->m_flags |= M_VLANTAG;
to mark the packet m with the specified VLAN tag.
On output the driver should check the mbuf for the M_VLANTAG flag to
see if a VLAN tag is present and valid:
if (m->m_flags & M_VLANTAG) {
... = m->m_pkthdr.ether_vtag; /* htons()? */
... pass tag to hardware ...
}
VLAN tags are stored in host byte order. Byte swapping may be necessary.
(Note: This driver conversion was mechanic and did not add or remove any
byte swapping in the drivers.)
Remove zone_mtag_vlan UMA zone and MTAG_VLAN definition. No more tag
memory allocation have to be done.
Reviewed by: thompsa, yar
Sponsored by: TCP/IP Optimization Fundraise 2005
of individual interfaces should match the ipackets/ibytes counter of
the aggregate (FEC) interface.
PR: kern/82189
Submitted by: Stikheev Andrew <sand AT zunet DOT ru>
MFC after: 3 days
trunk ports first. If that succeeds, and we're inside our own bounds,
so be it.
Still not ideal -- adding a port after changing an MTU doesn't change
port's MTU, but a step in the right direction.
PR: kern/95417
Submitted by: Vladimir Ivanov <wawa AT yandex-team DOT ru>
MFC after: 3 days
I've slightly edited a patch to make the conditional logic positive
and remove (what I think was) a redundant ng_fec_init() call.
are supposed to be set directly in ifnet already. This change fixes a
panic when ng_eiface node is attached to ng_fec node and the latter is
shut down (ng_fec sets flags and then calls SIOCSIFFLAGS with a NULL
argument).
MFC after: 3 days
- Fix a couple of LORs and panics;
- Temporarily remove the code that tries to cleanup sockets that stuck
on accepting queues (both complete and incomplete). I'm taking an ostrich
approach here until I find a better way to deal with sockets that were
disconnected before accepting (i.e. while socket was on complete or
incomplete accept queue).
- Store the Ethernet header in node softc.
- Initialize header with dst addr and ethertype in node
constructor method.
- In node connect method send NGM_ETHER_GET_ENADDR message
downwards.
- If received reply from ng_ether(4) store the src addr
in softc.
- Add NGM_PPPOE_SETENDADDR message that allows user to
override the address with whatever he/she wants.
- Print node ID, where possible.
- Prepend log messages with function name, or at least with "ng_pppoe".
Reviewed by: julian
Tested by: Joao Barros <joao.barros gmail.com>
on output frames.
Many people were confused with not working CARP, ng_bridge(4)
and other subsystems, because ng_ether(4) overwritten source
MAC address.
soreceive(), and sopoll(), which are wrappers for pru_sosend,
pru_soreceive, and pru_sopoll, and are now used univerally by socket
consumers rather than either directly invoking the old so*() functions
or directly invoking the protocol switch method (about an even split
prior to this commit).
This completes an architectural change that was begun in 1996 to permit
protocols to provide substitute implementations, as now used by UDP.
Consumers now uniformly invoke sosend(), soreceive(), and sopoll() to
perform these operations on sockets -- in particular, distributed file
systems and socket system calls.
Architectural head nod: sam, gnn, wollman
function, pru_close, to notify protocols that the file descriptor or
other consumer of a socket is closing the socket. pru_abort is now a
notification of close also, and no longer detaches. pru_detach is no
longer used to notify of close, and will be called during socket
tear-down by sofree() when all references to a socket evaporate after
an earlier call to abort or close the socket. This means detach is now
an unconditional teardown of a socket, whereas previously sockets could
persist after detach of the protocol retained a reference.
This faciliates sharing mutexes between layers of the network stack as
the mutex is required during the checking and removal of references at
the head of sofree(). With this change, pru_detach can now assume that
the mutex will no longer be required by the socket layer after
completion, whereas before this was not necessarily true.
Reviewed by: gnn
we intend for the user to be able to unload them later via kldunload(2)
instead of calling linker_load_module() and then directly adjusting the
ref count on the linker file structure. This makes the resulting
consumer code simpler and cleaner and better hides the linker internals
making it possible to sanely lock the linker.
use this ioctl to obtain the list of HCI nodes. User-space application
is expected to preallocate 'ng_btsocket_hci_raw_node_list_names' structure
and set limit in 'num_nodes' field. The 'nodes' field should be allocated
as well and it should have space for at least 'num_nodes' elements.
The SIOC_HCI_RAW_NODE_LIST_NAMES should be issued on bound raw HCI socket.
It does not really really matter what HCI name the socket is bound to, as
long as it is not empty.
MFC after: 1 week
sampling_interval) fields in netflow v5 header. We do not use
them but some netflow tools show garbage.
PR: kern/96296
Submitted by: David Duchscher
Approved by: glebius
MFC after: 1 week
rather than an error. Detaches do not "fail", they other occur or
the protocol flags SS_PROTOREF to take ownership of the socket.
soclose() no longer looks at so_pcb to see if it's NULL, relying
entirely on the protocol to decide whether it's time to free the
socket or not using SS_PROTOREF. so_pcb is now entirely owned and
managed by the protocol code. Likewise, no longer test so_pcb in
other socket functions, such as soreceive(), which have no business
digging into protocol internals.
Protocol detach routines no longer try to free the socket on detach,
this is performed in the socket code if the protocol permits it.
In rts_detach(), no longer test for rp != NULL in detach, and
likewise in other protocols that don't permit a NULL so_pcb, reduce
the incidence of testing for it during detach.
netinet and netinet6 are not fully updated to this change, which
will be in an upcoming commit. In their current state they may leak
memory or panic.
MFC after: 3 months
than an int, as an error here is not meaningful. Modify soabort() to
unconditionally free the socket on the return of pru_abort(), and
modify most protocols to no longer conditionally free the socket,
since the caller will do this.
This commit likely leaves parts of netinet and netinet6 in a situation
where they may panic or leak memory, as they have not are not fully
updated by this commit. This will be corrected shortly in followup
commits to these components.
MFC after: 3 months
if ksocket is connected to an interface-type node somewhere later
in the graph (e.g., ng_eiface or ng_iface), the csum_data may be
applied to a wrong packet (if we encapsulate Ethernet or IP).
MFC after: 3 days
- Run send queue down to completion, not just one packet.
It has been observed to cause a stall queue otherwise.
- Prevent queueing multiple function calls to a node.
MFC after: 3 days
by NGM_PPPOE_SETMODE message. When D-Link compat mode is on, we will
broadcast PADI with empty Service-Name to all listening hooks.
o Rewrite the compatibility options. Before we had two modes - standard
and non-standard (aka 3Com). Now we have standard mode and two compat
flags, that can be combined.
o Be consistent and do s/STUPID/3COM/g. I don't say that 3Com mode isn't
stupid, just want to make code easier to read.
PPPoE AC, servicing a specific Service-Name, when client sends a PADI
with an empty Service-Name. Should it reply with all available service
names or should it be silent? Our implementation had chosen the latter,
while some other had chosen the former (they say Linux and Cisco). Now
some PPPoE clients appear, that rely on the assumption that AC will
send all names in a PADO reply to a PADI with wildcard Service-Name.
These clients can't connect to FreeBSD AC.
I have requested comments from authors of RFC2516 via email, but
received no reply.
This change makes FreeBSD AC compatible with D-Link DI-614+ and
D-Link DI-624+ SOHO routers, and probably others.
Big thanks to D-Link's Russian office, namely Victor Platov, for
assistance and support in investigation and testing of this change.
Details:
o Split pppoe_match_svc() into three different functions serving
different purposes:
- pppoe_match_svc() - match non-empty Service-Name tag from PADI
against all available hooks in listening state.
- pppoe_find_svc() - check that given Service-Name is not yet
registered.
- pppoe_broadcast_padi() - send a copy of PADI packet with empty
Service-Name tag to all listening hooks.
o For NGM_PPPOE_LISTEN message use pppoe_find_svc().
o In ng_pppoe_rcvdata() in a PADI case use pppoe_match_svc() for
a non-empty Service-Name tag, and pppoe_broadcast_padi() in
either case.
A side effect from the above changes is that now pppoed(8) and mpd
will reply to a empty Service-Name PADI sending a PADO with two
Service-Name tags - an empty one and correct one. This is not fatal,
and will be corrected in pppoed(8) and mpd later. No need to update
node interface version.
Supported by: D-Link
in flags. When sending export datagram from expiry thread, then
use default zero flags. This removes unpleasant contention of the
interrupt thread on mutexes (usually ng_ksocket's socket buffer
mutex).
