reordered in transit instead of dropping them altogether.
It uses sequence numbers of PPtPGRE packets.
A set of new sysctl(8) added to control this ability or disable it:
net.graph.pptpgre.reorder_max (1) defines maximum length of node's
private reorder queue used to keep data waiting for late packets.
Zero value disables reordering. Default value 1 allows the node to restore
the order for two packets swapped in transit. Greater values allow the node
to deliver packets being late after more packets in sequence
at cost of increased kernel memory usage.
net.graph.pptpgre.reorder_timeout (1) defines time value in miliseconds
used to wait for late packets. It may be useful to increase this
if reordering spot is distant.
MFC after: 1 month
You should not be using DES. You should not have been using DES for the
past 30 years.
The ed DES-CBC scheme lacked several desirable properties of a sealed
document system, even ignoring DES itself. In particular, it did not
provide the "integrity" cryptographic property (detection of tampering), and
it treated ASCII passwords as 64-bit keys (instead of using a KDF like
scrypt or PBKDF2).
Some general approaches ed(1) users might consider to replace the removed
DES mode:
1. Full disk encryption with something like AES-XTS. This is easy to
conceptualize, design, and implement, and it provides confidentiality for
data at rest. Like CBC, it lacks tampering protection. Examples include
GELI, LUKS, FileVault2.
2. Encrypted overlay ("stackable") filesystems (EncFS, PEFS?, CryptoFS,
others).
3. Native encryption at the filesystem layer. Ext4/F2FS, ZFS, APFS, and
NTFS all have some flavor of this.
4. Storing your files unencrypted. It's not like DES was doing you much
good.
If you have DES-CBC scrambled files produced by ed(1) prior to this change,
you may decrypt them with:
openssl des-cbc -d -iv 0 -K <key in hex> -in <inputfile> -out <plaintext>
Reviewed by: allanjude, bapt, emaste
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D17829
This will enable callers to take const paths as part of syscall
decleration improvements.
Where doing so is easy and non-distruptive carry the const through
implementations. In UFS the value is passed to an interface that must
take non-const values. In ZFS, const poisoning would touch code shared
with upstream and it's not worth adding diffs.
Bump __FreeBSD_version for external API consumers.
Reviewed by: kib (prior version)
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17805
Based on the comments in /etc/nsmb.conf.
Reviewed by: bcr
Approved by: krion (mentor, implicit), mat (mentor, implicit)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D17810
The description of CMSG_FIRSTHDR used two variables (mhdr and msg) to
reference the same thing. Use msghdr consistency across the manual page
instead.
Reviewed by: bcr
Approved by: krion (mentor, implicit), mat (mentor, implicit)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D17804
This adds new keywords to rc/service to enable/disable a service's
rc.conf(5) variable and "delete" to remove the variable.
When the "service_delete_empty" variable in rc.conf(5) is set to "YES"
(default is "NO") an rc.conf.d file (in /etc/ or /usr/local/etc) is
deleted if empty after modification using "service $foo delete".
Submitted by: lme (modified)
Reviewed by: 0mp (previous version), lme, bcr
Relnotes: yes
Sponsored by: Smule, Inc.
Differential Revision: https://reviews.freebsd.org/D17113
Also, link to the homepage of the BSSSD project, which developed the
original driver.
Reviewed by: bcr, kevans
Approved by: krion (mentor, implicit), mat (mentor, implicit)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D17608
This will no work when there is no cc in $PATH (which is the case before the
cross-tools stage once we no longer inherit $PATH in $WMAKE).
The variables set by bsd.compiler.mk/bsd.linker.mk are not needed in these
stages so this avoids a little bit of makefile parsing.
Reviewed By: emaste
Approved By: jhb (mentor)
Differential Revision: https://reviews.freebsd.org/D16814
Remove malloc_domain(9) and most other _domain KPIs added in r327900.
The new functions allow the caller to specify a general NUMA domain
selection policy, rather than specifically requesting an allocation from
a specific domain. The latter policy tends to interact poorly with
M_WAITOK, resulting in situations where a caller is blocked indefinitely
because the specified domain is depleted. Most existing consumers of
the _domain KPIs are converted to instead use a DOMAINSET_PREF() policy,
in which we fall back to other domains to satisfy the allocation
request.
This change also defines a set of DOMAINSET_FIXED() policies, which
only permit allocations from the specified domain.
Discussed with: gallatin, jeff
Reported and tested by: pho (previous version)
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17418
In the last decade(s) we have seen both short term or long term projects
committed to the tree which were considered or even marked "experimental".
While out-of-tree development has become easier than it used to be in
CVS times, there still is a need to have the code shipping with HEAD but
not enabled by default.
While people may think about VIMAGE as one of the recent larger, long term
projects, early protocol implementations (before they are standardised)
are others. (Free)BSD historically was one of the operating systems
which would have running code at early stages and help develop and
influence standardisation and the industry.
Give developers an opportunity to be more pro-active for early adoption
or running large scale code changes stumbling over each others but not
the user's feet. I have not added the option to NOTES in order to avoid
breaking supported option builds, which require constant compile testing.
Discussed with: people in the corridor
The provided example jail configs do not work for multiple interfaces.
Multiple interfaces need to be specified as a comma separated list or
using multiple += lines in jail.conf. In the given example, a space-
separated string is used, which doesn't work with multiple interfaces.
Also added a note to the README about VIMAGE being built-in by default
on amd64 in FreeBSD 12, with appropriate instructions for loading the
necessary netgraph ether module (ng_ether) since it is neither built-
in nor autoloads.
Submitted by: Ryan Moeller <ryan@freqlabs.com>
Reported by: Ryan Moeller <ryan@freqlabs.com>
MFC after: 3 days
Sponsored by: Smule, Inc.
Differential Revision: https://reviews.freebsd.org/D17697
When users mark an interface to not use aliases they likely also don't
want to use the link-local v6 address there.
PR: 201695
Submitted by: Russell Yount <Russell.Yount AT gmail.com>
Differential Revision: https://reviews.freebsd.org/D17633
and runs scripts containing "KEYWORD: resume" with single "resume" argument.
Working example is the port sysutils/cpupdate that defines
extra_commands="resume" to reload CPU microcode cleared
by suspend/resume sequence.
This change does nothing for a system having no scripts with KEYWORD: resume.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D15247
This driver was marked as gone in 12. We're at 13 now. Remove it.
Data from nycbug's dmesg cache shows only one potential user,
suggesting it never was used much. However, even though this device
has been obsolete for 15 years at least, sys/joystick.h is included in
a number of graphics packages still, so that remains. A full exprun
is needed before that can be removed.
RelNotes: yes
Differential Revision: https://reviews.freebsd.org/D17629
I held the mistaken belief this was completely unused. While the
driver is unused and likely not relevant for a long time,
sys/joystick.h lives on in maybe half a dozen ports, even though
hardware to use it hasn't been widely used in maybe 15 years.
These are needed for .ctors/.dtors and .jcr handling. The former needs
all the function pointers to be called in the correct order from the
.init/.fini section. The latter just needs to call a gcj specific function
if it exists with a pointer to the start of the .jcr section.
This is currently disabled until __dso_handle support is added.
Reviewed by: emaste
MFC after: 1 month
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17587
The current deprecated list is: ae, bm, cs, de, dme, ed, ep, ex, fe,
pcn, sf, sn, tl, tx, txp, vx, wb, xe
The list as refined as part of FCP-0101. Per the FCP, devices may be
removed from the deprecation list if enough users are found or they are
converted to iflib.
FCP: https://github.com/freebsd/fcp/blob/master/fcp-0101.md
When building CheriBSD we have to set XLD/XCC/XCFLAGS on the command line.
This triggers the $XCC != $CC case in bsd.compiler.mk (and the same for LD
in bsd.linker.mk) which causes it to call ${XCC} --version and
${XLD} --version (plus various awk+sed+echo calls) in every subdirectory.
For incremental builds and stages that only walk the source tree this is
often the majority of the time spent in that directory.
By only computing the value of the X_COMPILER_*/X_LINKER_* variables if
_WANT_TOOLCHAIN_CROSS_VARS is set we can reduce the number of cc/ld calls
to once per build stage instead of once per recursive make.
With this change (and no changes to the sources) the `make includes` stage
now takes 28 seconds at -j1 instead of 86 seconds.
Approved By: brooks (mentor)
Differential Revision: https://reviews.freebsd.org/D17046
This provides a chicken switch for anyone negatively impacted by
enabling NUMA in the amd64 GENERIC kernel configuration. With
NUMA disabled at boot-time, information about the NUMA topology
is not exposed to the rest of the kernel, and all of physical
memory is viewed as coming from a single domain.
This method still has some performance overhead relative to disabling
NUMA support at compile time.
PR: 231460
Reviewed by: alc, gallatin, kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17439
This driver has been obsolete since the FreeBSD 4.x. It should have
been removed then since the sym(4) driver had subsumed it. The driver
was commented out of GENERIC in 2000.
RelNotes: Yes
stg(4) is marked as gone in 12. Remove it. There are no sightings of
it in the nycbug dmesg database. It was for an obscure SCSI card that
sold mostly in Japan, and was especially popilar among pc98 hackers in
the 4.x time frame. It was also only enabled on i386.
Relnote: Yes
nsp(4) is marked as gone in 12. Remove it. There are no sightings of
it in the nycbug dmesg database. It was for an obscure SCSI card that
sold mostly in Japan, and was especially popilar among pc98 hackers in
the 4.x time frame. It was also only enabled on i386.
Relnote: Yes
ncv(4) is marked as gone in 12. Remove it. There are no sightings of
it in the nycbug dmesg database. It was for an obscure SCSI card that
sold mostly in Japan, and was especially popilar among pc98 hackers in
the 4.x time frame..
Relnote: Yes
The buslogic scsi driver has been tagged as gone in 12 for some time
now. Remove it. The nycbug dmesg database shows only one sighting in 6
for this driver. It was very popular in the early days of the project,
but that popularity seems to have died by 2004 when the nycbug
database started up.
Relnotes: yes
Remove the advanssy drivers (both adv and adw). They were tagged as
gone in 12 a while qgo. The nycbug dmesg database shows this was last
seen in 6 and there were only a few adv sightings then (none for adw).
Relnotes: yes
aic was marked to be gone in 12 a while ago. Go ahead and remove it.
nycbug's dmesg database shows this was last seen in 6 and one more
time in 4.x. It never was popular, and what popularity it had was over
before the nycbug databse got going in 2004.
Relnotes: yes
We tagged aha as gone in 12 a while ago. Proceed with its removal.
Data from nycbug's database shows the last sighting of this driver in
6, with the prior one in 4.x show its popularity had died prior to
4.x.
Relnotes: yes
Remove mse and all support for bus and inport devices from the tree.
Data from nycbug's dmesg database shows the last sighting of this
driver was in 4.10 on only one machine.
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D17628
This driver was marked as gone in 12. We're at 13 now. Remove it.
Data from nycbug's dmesg cache shows only one potential user,
suggesting it never was used much.
RelNotes: yes
Differential Revision: https://reviews.freebsd.org/D17629
* register handler for ingress address appearing/disappearing;
* add new srcaddr hash table for fast softc lookup by srcaddr;
* when srcaddr disappears, clear IFF_DRV_RUNNING flag from interface,
and set it otherwise;
* remove the note about ingress address from BUGS section.
MFC after: 1 month
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D17134
The current documentation describing the syntax of a VALE port is wrong.
This patch fixes it to make it consistent.
Approved by: bcr, gnn (mentor)
Differential Revision: https://reviews.freebsd.org/D17411
handler receives the type of event IFADDR_EVENT_ADD/IFADDR_EVENT_DEL,
and the pointer to ifaddr. Also ifaddr_event now is implemented using
ifaddr_event_ext handler.
MFC after: 3 weeks
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D17100
__DEFAULT_YES/NO. These options simply cannot work where we were using
__DEFAULT_NO. The proper thing to do in that case is to use the
BROKEN_OPTIONS knob instead.
WITHOUT_LOADER_LUA is only needed since we turned it off by default on
powerpc and sparc64 in r338203. Same with
WITHOUT_LOADER_GEIL. WITH_NVME, WITHOUT_NVME, WITH_LOADER_FORCE_LE
have been needed since they were added.
Primarily missing glyphs used by mandoc.
Added:
U+2010 hyphen
U+2011 non-breaking hyphen
U+2012 figure dash
U+2013 en dash
U+2014 em dash
U+2018 left single quotation mark
U+2019 right single quotation mark
U+2020 dagger
U+2021 double dagger
U+203E overline
U+2122 trade mark sign
U+2502 box drawings light vertical
U+25A1 white square
U+25CA lozenge
U+25CB circle
U+2660 black spade suit
U+2663 black club suit
U+2665 black heart suit
U+2666 black diamond suit
U+FFFD replacement char
Sponsored by: The FreeBSD Foundation
it appropriately when building share/ctypedef and share/colldef.
This makes the resulting locale data in EL->EB (amd64->powerpc64) cross
build and in the native EB build match. Revert the changes done to libc
in r308170 as they are no longer needed.
PR: 231965
Reviewed by: bapt, emaste, sbruno, 0mp
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D17603
Currently, the 'thread' command (to switch the debugger to another thread)
only accepts decimal-encoded tids. Use the same parsing logic as 'show
thread <arg>' to accept hex-encoded thread pointers in addition to
decimal-encoded tids.
Document the 'thread' command in ddb.4 and expand the 'show thread'
documentation to cover the tid usage.
Reported by: bwidawsk
Reviewed by: bwidawsk (earlier version), kib (earlier version), markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D16962
Pre-defined policies are useful when integrating the domainset(9)
policy machinery into various kernel memory allocators.
The refactoring will make it easier to add NUMA support for other
architectures.
No functional change intended.
Reviewed by: alc, gallatin, jeff, kib
Tested by: pho (part of a larger patch)
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17416
was really a "socket close" callback.
Update the socket destructor functionality to run when a socket is
destroyed (rather than when it is closed). The original submitter has
confirmed that this change satisfies the intended use case.
Suggested by: rwatson
Submitted by: Michio Honda <micchie at sfc.wide.ad.jp>
Tested by: Michio Honda <micchie at sfc.wide.ad.jp>
Approved by: re (kib)
Differential Revision: https://reviews.freebsd.org/D17590
in Italy, and is not related to Canada.
While here, remove the header as we do NOT currently use CLDR data to
generate timedef, and it's misleading.
PR: 225855
Reviewed by: bapt
Approved by: re (gjb), kib (mentor)
Differential Revision: https://reviews.freebsd.org/D17551
Since there have been major updates to both drivers in r339338,
refresh the man pages with new and updated information.
Reviewed by: sbruno@, 0mp@, jeffrey.e.pieper@intel.com, manpages
Approved by: re (gjb@, kib@)
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D15927
data, namely 0xE000-0xF8FF private use area, and 0xFF00-0xFFF half- and
fullwidth punctuation.
While here, update tools/tools/locale/README based on my experience
rebuilding the locale data.
PR: 225692
Reviewed by: bapt, cem (previous version)
Approved by: re (gjb), kib (mentor)
Differential Revision: https://reviews.freebsd.org/D17471
well as on SPARC64 and can cause boot failures even when no encrypted
disks are present. Presumably, the reasons, while unknown, are the same
and most-likely are the result of some endian-unsafe code. Pending
finding the actual problem, extend the blacklist entry for these parts
of loader on SPARC to also cover all PowerPC platforms.
Approved by: re (kib)
Provide an example of specifying a common vendor value as the documentation
is not clear enough at the moment.
While here, add 'D:#' to the previous example to eat the remaining
description string.
Also, pet mandoc a bit.
Submitted by: Yuri Pankov <yuripv@yuripv.net>
Reviewed by: cem, imp
Approved by: re (kib), krion (mentor, implicit), mat (mentor, implicit)
Differential Revision: https://reviews.freebsd.org/D17321
- Fix "mandoc -Tlint" warnings.
- Use the "Er" macro for errors.
- Add an extra newline for readability.
- Reference m_pullup(9) and m_defrag(9).
- Use the "Fx" macro when talking about FreeBSD versions.
Reviewed by: bcr
Approved by: re (gjb), krion (mentor)
Differential Revision: https://reviews.freebsd.org/D17270
- Switch to using 32b port/link capabilities in the driver. The 32b
format is used internally by firmwares > 1.16.45.0 and the driver will
now interact with the firmware in its native format, whether it's 16b
or 32b. Note that the 16b format doesn't have room for 50G, 200G, or
400G speeds.
- Add a bit in the pause_settings knobs to allow negotiated PAUSE
settings to override manual settings.
- Ensure that manual link settings persist across an administrative
down/up as well as transceiver unplug/replug.
- Remove unused is_*G_port() functions.
Approved by: re@ (gjb@)
MFC after: 1 month
Sponsored by: Chelsio Communications
The new manpage documents the tunables and statistic sysctls exposed by
iflib.
Reviewed by: bcr
Approved by: re (gjb)
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D16920
Without this we get spurious output during boot as we try to run
nonexistant HyperV scripts on non-x86 models.
Reviewed by: kib
Approved by: re (gjb)
Differential Revision: https://reviews.freebsd.org/D17211
- Warn if multiple DIRS have conflicting metadata
- This fixes META_MODE writing to a very long .meta file that contained
the full DESTDIR path.
Reported by: sjg, jonathan
Sponsored by: Dell EMC
Approved by: re (gjb)
Reflect the fact that ig4(4) is not an Intel-specific device but
a driver for Synopsys DesignWare I2C controller that now ships in
AMD systems too.
Approved by: re (kib), rpokala
We want to build the 12.0 release artifacts with reproducible builds
mode enabled. Switch it on in HEAD now to enable testing with upcoming
ALPHA builds. We can revisit the default setting for HEAD after the
branch is created.
This change eliminates the build metadata (user, hostname, timestamp,
etc.) from the kernel and loader. If the src tree is a git, svn or p4
checkout with changes then the metadata is retained.
The WITHOUT_REPRODUCIBLE_BUILD src.conf(5) knob can be used to revert
to the previous behaviour.
Approved by: re (gjb)
Sponsored by: The FreeBSD Foundation
use of u3g(4) dongles, and in many cases can work out of the box.
Reviewed by: hselasky
Approved by: re (gjb)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D16974
Document sysctls for the second PWM channel added in r335855
Also fix some minor style issues and a typo.
Approved by: re (gjb)
Submitted by: bobf@mrp3.com
Reviewed by: 0mp
Differential Revision: https://reviews.freebsd.org/D17084
This was disabled recently due to lack of support in KDB disassembler
and DTrace FBT provider. Support for 'C'-extension to both of these was
added, so we can now enable 'C'-extension.
This reduces size of the kernel important for low-end embedded devices,
and saves cache footprint for high perfomance machines.
Approved by: re (kib)
Sponsored by: DARPA, AFRL
given in random(4).
This includes updating of the relevant man pages, and no-longer-used
harvesting parameters.
Ensure that the pseudo-unit-test still does something useful, now also
with the "other" algorithm instead of Yarrow.
PR: 230870
Reviewed by: cem
Approved by: so(delphij,gtetlow)
Approved by: re(marius)
Differential Revision: https://reviews.freebsd.org/D16898
No functional change.
When attempting to document the changed argument types in devstat.9, I
discovered the 20 year old manual page severely mismatched reality even
prior to my simple change. So I took a first cut pass cleaning that up to
match reality. I'm sure I've missed some things; the goal was just to leave
it better than when I started.
Sponsored by: Dell EMC Isilon
SCTP. They are based on what is specified in the Solaris DTrace manual
for Solaris 11.4.
Reviewed by: 0mp, dteske, markj
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D16839
are fully debugged. With these options off, the unified "loader"
binary for sparc64 works to boot a kernel from ZFS.
Submitted by: kevans
Reviewed by: imp kevans
A similar note is already present in the description of the
ntpd_sync_on_start variable.
This patch adds a note to the description of the ntpdate_enable variable.
This way it would be easier to spot. Otherwise a user might skip the part
of the manual describing ntpd_sync_on_start if they stop reading after
learning about ntpdate_enable.
Reviewed by: bcr
Approved by: mat (mentor)
Differential Revision: https://reviews.freebsd.org/D16519
- Move some information out of the SYNOPSIS section because it is formated
in a broken way by mandoc(1) otherwise.
- Improve the formatting of the list of provided ioctls.
- Use "Fa" for struct fields.
- Pet mandoc and igor.
- Fix typos.
Reviewed by: kevans
Approved by: mat (mentor)
Differential Revision: https://reviews.freebsd.org/D16765
Some background: in the GSoC project, libbe/Makefile lived in lib/libbe. I
created projects/bectl branch, maintained the above for all of five
minutes before I misread Makefile.inc1 and decided that it couldn't possibly
build outside of cddl/, so I kicked the Makefile out into the cddl/ build
and all was good. The misreading was of the bit where .WAIT is added to
SUBDIR after lib, libexec but prior to building bin and cddl *only during
the install targets*, which is the critical part.
Fast forward- buildworld was still broken in my branch unbeknownst to me
because I didn't nuke my OBJDIR. Combing through Makefile.inc1 eventually
revealed the necessary magic to make sure that libbe's dependencies are
specified well enough, and it becomes clear what needs done to make a
non-cddl/ build work. This is an interesting prospect, because the build
split is kind of annoying to work with.
IGNORE_PRAGMA is added to avoid dropping WARNS by one more. This was
previously pulled in via cddl/Makefile.inc.
This basically adds makes use of the C99 restrict keyword, and also
adds some 'const's to four threading functions: pthread_mutexattr_gettype(),
pthread_mutexattr_getprioceiling(), pthread_mutexattr_getprotocol(), and
pthread_mutex_getprioceiling. The changes are in accordance to POSIX/SUSv4-2018.
Hinted by: DragonFlyBSD
Relnotes: yes
MFC after: 1 month
Differential Revision: D16722
The function retrieves the thread name previously set by
pthread_set_name_np(3). The name is cached in the process memory.
Requested by: Willem Jan Withagen <wjw@digiware.nl>
Man page update: Yuri Pankov <yuripv@yuripv.net>
Reviewed by: ian (previous version)
Discussed with: arichardson, bjk (man page)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D16702
Document efidev(4), provider of userland access to EFI Runtime Services. A link is created to efirtc(4), which handles the time-of-day clock side.
efirt(9) is the kernel side of this.
Reviewed by: imp, kib (earlier version)
Differential Revision: https://reviews.freebsd.org/D16696
jails since FreeBSD 7.
Along with the system call, put the various security.jail.allow_foo and
security.jail.foo_allowed sysctls partly under COMPAT_FREEBSD11 (or
BURN_BRIDGES). These sysctls had two disparate uses: on the system side,
they were global permissions for jails created via jail(2) which lacked
fine-grained permission controls; inside a jail, they're read-only
descriptions of what the current jail is allowed to do. The first use
is obsolete along with jail(2), but keep them for the second-read-only use.
Differential Revision: D14791
- Use "Dq Li" for inline commands as we do in other manuals.
- Pet "igor" and "mandoc -Tlint".
- Reword some parts for clarity.
- Add missing Xr macros.
- Reformat SEE ALSO to make the section more readable.
Reviewed by: eadler, krion, mat
Approved by: krion (mentor), mat (mentor)
Differential Revision: https://reviews.freebsd.org/D15350
lld should now be a usable linker for armv7, and is already used as the
bootstrap linker (for linking the kernel and userland). Also enable as
the system linker now (/usr/bin/ld) for further testing and evaluation.
(This change will be reverted in case of unexpected fallout.)
Approved by: manu
Sponsored by: The FreeBSD Foundation
Create loader_{4th,lua,simp}{,.efi}. All of these are installed by
default. Create LOADER_DEFAULT_INTERP to specify the default
interpreter when no other is specified. LOADER_INTERP is the current
interpreter language building. Turn building of lua on by default to
match 4th. simploader is a simplified loader build w/o any interpreter
language (but with a simple loader). This is the historic behavir you
got with WITHOUT_FORTH. Make a hard link to the default loader. This
has to be a hard link rather than the more desirable soft link because
older zfsboot blocks don't support symlinks.
RelNotes: Yes
Differential Revision: https://reviews.freebsd.org/D16705
Describe the role of tags and mapping objects as abstractions.
Describe static vs dynamic transaction types and give a brief overview
of the set of functions and object life cycles used for static vs
dynamic.
While here, fix a few other typos and expand a bit on parent tags.
Reviewed by: cem, imp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D16652
bectl(8) is an administrative interface for working with ZFS boot
environments, intended to provide a superset of the functionality provided
by sysutils/beadm.
libbe(3) is the back-end library that the required functionality has been
pulled out into for later reuse.
These were originally written for GSoC 2017 under the mentorship of
allanjude@.
bectl(8) has proven pretty stable in my testing, with the known bug
documented in the man page.
Relnotes: yes
The Makefile part in the PR is solved already differently, so this
part is skipped form the PR The man page change change is slightly
changed to adapt to the way the Makefile works and to the spirit
of what is intended here.
Submitted by: Juan Ramón Molina Menor <info@juanmolina.eu>
PR: 194910
Sponsored by: Essen Hackathon
BPF (eBPF) is an independent instruction set architecture which is
introduced in Linux a few years ago. Originally, eBPF execute
environment was only inside Linux kernel. However, recent years there
are some user space implementation (https://github.com/iovisor/ubpf,
https://doc.dpdk.org/guides/prog_guide/bpf_lib.html) and kernel space
implementation for FreeBSD is going on
(https://github.com/YutaroHayakawa/generic-ebpf).
The BPF target support can be enabled using WITH_LLVM_TARGET_BPF, as it
is not built by default.
Submitted by: Yutaro Hayakawa <yhayakawa3720@gmail.com>
Reviewed by: dim, bdrewery
Differential Revision: https://reviews.freebsd.org/D16033
We use ps to collect the information of all processes in textdump. But
it doesn't contain process arguments which however sometimes are very
useful for debugging. The new 'a' modifier adds that capability.
While here, remove 'm' modifier from ddb.4. It was in the manual page
from its very first revision, but I could not find any evidence of the
code ever supporting it.
Submitted by: Terry Hu <thu@panzura.com>
Reviewed by: kib
MFC after: 1 week
Sponsored by: Panzura
Differential Revision: https://reviews.freebsd.org/D16603
* Remove the cn_hash field (removed by r51906)
* Add the cn_lkflags field (added by r144285)
* Remove duplicate definition of cnp.
Reviewed by: kib
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D16629
Currently, the per-queue limit is a function of the receive buffer
size and the MSS. In certain cases (such as connections with large
receive buffers), the per-queue segment limit can be quite large.
Because we process segments as a linked list, large queues may not
perform acceptably.
The better long-term solution is to make the queue more efficient.
But, in the short-term, we can provide a way for a system
administrator to set the maximum queue size.
We set the default queue limit to 100. This is an effort to balance
performance with a sane resource limit. Depending on their
environment, goals, etc., an administrator may choose to modify this
limit in either direction.
Reviewed by: jhb
Approved by: so
Security: FreeBSD-SA-18:08.tcp
Security: CVE-2018-6922
Other architectures are documented in terms of the name that is displayed by
'uname -p', aka MACHINE_ARCH and TARGET_ARCH in the build system, now
aarch64 matches the rest of them.
PR: 220297
large atomic operation may incur significant performance penalty" ) for
arm before armv6. Since on these older architectures atomic operations
are always translated to libcalls, and this is expected, the warning is
not really useful there.
To compile this driver with evdev support enabled, place
following lines into the kernel configuration file:
options EVDEV_SUPPORT
device evdev
Note: Native and evdev modes are mutually exclusive.
Reviewed by: gonzo, wblock (docs)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D11156
dirdeps.mk and meta.autodep.mk will now look for
Makefile.depend.options
to handle optional dependencies, the work is all done by
dirdeps-options.mk
Also update to latest meta.stage.mk and gendirdeps.mk
Reviewed by: bdrewery
Differential Revision: https://reviews.freebsd.org/D15701
As of r336972 lld is capable linking the armv7 kernel and userland,
so enable it by default.
PR: 229050
Reviewed by: kevans
Tested by: kevans
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D16528
Add the ioctl PCIOCBARMMAP on /dev/pci to conveniently create
userspace mapping of a PCI device BAR. This is enormously superior to
read the BAR value with PCIOCREAD and then try to mmap /dev/mem, and
should allow to automatically activate the mapped BARs when needed in
future.
Current implementation creates new sg pager for each user mmap
request. If the pointer (and reference) to a managed device pager is
stored in pci_map, we would be able to revoke all mappings on the BAR
deactivation or relocation. This is related to the unimplemented BAR
activation on mmap, and is postponed for the future.
Discussed with: imp, jhb
Sponsored by: The FreeBSD Foundation, Mellanox Technologies
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D15583
The jedec_ts(4) driver has been marked as deprecated in stable/11, and is
now being removed from -HEAD. Add a notice in UPDATING, and update the few
remaining references (regarding jedec_dimm(4)'s compatibility and history)
to reflect the fact that jedec_ts(4) is now deleted.
Reviewed by: avg
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D16537
The dtrace provider for UDP-Lite is modeled after the UDP provider.
This fixes the bug that UDP-Lite packets were triggering the UDP
provider.
Thanks to dteske@ for providing the dwatch module.
Reviewed by: dteske@, markj@, rrs@
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D16377
The nvmem interface helps provider of nvmem data to expose themselves to consumer.
NVMEM is generally present on some embedded board in a form of eeprom or fuses.
The nvmem api are helpers for consumer to read/write the cell data from a provider.
Differential Revision: https://reviews.freebsd.org/D16419
The timespecadd(3) family of macros were imported from NetBSD back in
r35029. However, they were initially guarded by #ifdef _KERNEL. In the
meantime, we have grown at least 28 syscalls that use timespecs in some
way, leading many programs both inside and outside of the base system to
redefine those macros. It's better just to make the definitions public.
Our kernel currently defines two-argument versions of timespecadd and
timespecsub. NetBSD, OpenBSD, and FreeDesktop.org's libbsd, however, define
three-argument versions. Solaris also defines a three-argument version, but
only in its kernel. This revision changes our definition to match the
common three-argument version.
Bump _FreeBSD_version due to the breaking KPI change.
Discussed with: cem, jilles, ian, bde
Differential Revision: https://reviews.freebsd.org/D14725
By default ld.lld should be the bootstrap linker (only) on i386 right
now. Once the i386 exp-run with LLD_IS_LD has a good result this will
also be enabled by default.
Reported by: andrew
Pointy hat to: emaste
Akin to r327783 for amd64. lld has been usable for amd64 for quite some
time, but a couple of issues remained that affected i386. These were
recently addressed upstream in lld and merged into FreeBSD or addressed
directly in FreeBSD (r326831, r326879, r326897, r326957, r333401,
r334626, r336664).
Similarly to the intial amd64 commit this change enables lld only as the
bootstrap linker (used to link the kernel and userland libraries and
executables), while GNU ld.bfd is still installed as /usr/bin/ld and
used for ports builds. That will be changed shortly, after an exp-run.
This is a recommit of r327823 after additional lld fixes.
PR: 225128 (exp-run)
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
The padding makes it much easier to read, but occasionally means that commits
like this one have to be done to follow up. I intentionally kept this
separate from r336841 to try and make things easier to follow later on.
Approved by: bapt (mentor)
As discussed in arm@. This is a scaled back version of the prior
commit because xscale is overlaoded in places to mean armv5 or
similar. The OLD XSCALE stuff hasn't been useful in a while. The
original committer (cognet@) was the only one that had boards for
it. He's blessed this removal. Newer XSCALE (GUMSTIX) is for hardware
that's quite old. After discussion on arm@, it was clear there was no
support for keeping it.
Noticed by: andrew@
r336773 removed all things xscale. However, some things xscale are
really armv5. Revert that entirely. A more modest removal will follow.
Noticed by: andrew@
The OLD XSCALE stuff hasn't been useful in a while. The original
committer (cognet@) was the only one that had boards for it. He's
blessed this removal. Newer XSCALE (GUMSTIX) is for hardware that's
quite old. After discussion on arm@, it was clear there was no support
for keeping it.
Differential Review: https://reviews.freebsd.org/D16313
target.
Also update the pfctl tests Makefile to work with this change.
Approved by: bapt (mentor)
Differential Revision: https://reviews.freebsd.org/D16430
It works excellent, but KDB disassembler and DTrace FBT provider for
RISC-V do lack support for it. They currently handle 4-byte instructions
only, while C-compressed ISA extension introduces 2-byte instructions
freely mixing them together.
So disable it for now.
Reviewed by: markj@
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D16436
This paves the way for moving config files out of head/etc and into the
directories with the src.
Approved by: bapt (mentor)
Differential Revision: https://reviews.freebsd.org/D16406
declaired static. This will allow us to change the definition on arm64
as it has the same issues described in r336349.
Reviewed by: bz
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D16147
Perhaps using libbe.a from "${DESTDIR}${LIBDIR}" might have been the
prevailing technique at one point, but nowadays it appears to be to
preferred to spell this as "${OBJTOP}/lib" -- make it so.
