Commit Graph

26 Commits

Author SHA1 Message Date
Robert Watson
eb956cd041 Use if_maddr_rlock()/if_maddr_runlock() rather than IF_ADDR_LOCK()/
IF_ADDR_UNLOCK() across network device drivers when accessing the
per-interface multicast address list, if_multiaddrs.  This will
allow us to change the locking strategy without affecting our driver
programming interface or binary interface.

For two wireless drivers, remove unnecessary locking, since they
don't actually access the multicast address list.

Approved by:	re (kib)
MFC after:	6 weeks
2009-06-26 11:45:06 +00:00
John Baldwin
9f9b77e713 Add locking to snc(4) so it is MPSAFE:
- Add a mutex to the softc to protect the softc and device hardware.
- Use a private timer routine to drive the transmit watchdog timer instead
  of using if_watchdog/if_timer.
- If if_alloc() fails during attach, fail the attach with an error rather
  than panic'ing.
- Clear RUNNING and OACTIVE only in sncstop().
- Don't mess with IFF_UP.
- Don't leak 'struct ifnet' on detach.
- Setup interrupt handler after ether_ifattach().
- Call ether_ifdetach() rather than if_detach() in the pccard detach
  routine.

Tested by:	no one despite repeated requests
2008-08-04 19:19:18 +00:00
John Baldwin
8b461b2ba1 Remove various and sundry NetBSDism's in preparation for adding locking. 2008-05-30 21:48:05 +00:00
Ruslan Ermilov
44e09d2fa2 Fix -Wundef warnings from compiling GENERIC and LINT kernels of
all architectures.
2005-12-06 11:19:37 +00:00
Ruslan Ermilov
4a0d6638b3 - Store pointer to the link-level address right in "struct ifnet"
rather than in ifindex_table[]; all (except one) accesses are
  through ifp anyway.  IF_LLADDR() works faster, and all (except
  one) ifaddr_byindex() users were converted to use ifp->if_addr.

- Stop storing a (pointer to) Ethernet address in "struct arpcom",
  and drop the IFP2ENADDR() macro; all users have been converted
  to use IF_LLADDR() instead.
2005-11-11 16:04:59 +00:00
Robert Watson
13f4c340ae Propagate rename of IFF_OACTIVE and IFF_RUNNING to IFF_DRV_OACTIVE and
IFF_DRV_RUNNING, as well as the move from ifnet.if_flags to
ifnet.if_drv_flags.  Device drivers are now responsible for
synchronizing access to these flags, as they are in if_drv_flags.  This
helps prevent races between the network stack and device driver in
maintaining the interface flags field.

Many __FreeBSD__ and __FreeBSD_version checks maintained and continued;
some less so.

Reviewed by:	pjd, bz
MFC after:	7 days
2005-08-09 10:20:02 +00:00
Robert Watson
13b203d0d7 Modify device drivers supporting multicast addresses to lock if_addr_mtx
over iteration of their multicast address lists when synchronizing the
hardware address filter with the network stack-maintained list.

Problem reported by:	Ed Maste (emaste at phaedrus dot sandvine dot ca>
MFC after:		1 week
2005-08-03 00:18:35 +00:00
Scott Long
76b85e0fe6 change 'dev' to 'sc->sc_dev' to fix the build.
Approved: re (implicit)
2005-06-12 15:25:19 +00:00
Brooks Davis
fc74a9f93a Stop embedding struct ifnet at the top of driver softcs. Instead the
struct ifnet or the layer 2 common structure it was embedded in have
been replaced with a struct ifnet pointer to be filled by a call to the
new function, if_alloc(). The layer 2 common structure is also allocated
via if_alloc() based on the interface type. It is hung off the new
struct ifnet member, if_l2com.

This change removes the size of these structures from the kernel ABI and
will allow us to better manage them as interfaces come and go.

Other changes of note:
 - Struct arpcom is no longer referenced in normal interface code.
   Instead the Ethernet address is accessed via the IFP2ENADDR() macro.
   To enforce this ac_enaddr has been renamed to _ac_enaddr.
 - The second argument to ether_ifattach is now always the mac address
   from driver private storage rather than sometimes being ac_enaddr.

Reviewed by:	sobomax, sam
2005-06-10 16:49:24 +00:00
Max Laier
473156220d Only send packet to bpf if we are committed to send it. Previously it was
possible that the same packet would show up multiple times.  This poses some
constraints on the TBD locking for snc(4) (see comment).

Obtained from:	DragonFlyBSD
Submitted by:	Joerg Sonnenberger
Reviewed by:	rwatson
2005-02-21 17:30:10 +00:00
Warner Losh
098ca2bda9 Start each of the license/copyright comments with /*-, minor shuffle of lines 2005-01-06 01:43:34 +00:00
Robert Watson
5ce832e127 Since if_snc doesn't contain locking or run with INTR_MPSAFE, mark
the interface as IFF_NEEDSGIANT so if_start is run holding Giant.
2004-08-13 23:47:01 +00:00
Maxime Henrion
866a788cc2 We don't need to initialize if_output, ether_ifattach() does it
for us.
2004-05-23 16:11:53 +00:00
Matthew N. Dodd
e3bbbec2ca Announce ethernet MAC addresss in ether_ifattach(). 2004-03-14 07:12:25 +00:00
Brooks Davis
389748c1e8 Do if_xname conversion. I missed this one because it's pc98 only. 2003-11-01 23:24:38 +00:00
John Baldwin
8b149b5131 Consistently use the BSD u_int and u_short instead of the SYSV uint and
ushort.  In most of these files, there was a mixture of both styles and
this change just makes them self-consistent.

Requested by:	bde (kern_ktrace.c)
2003-08-07 15:04:27 +00:00
Dag-Erling Smørgrav
fe58453891 Introduce an M_ASSERTPKTHDR() macro which performs the very common task
of asserting that an mbuf has a packet header.  Use it instead of hand-
rolled versions wherever applicable.

Submitted by:	Hiten Pandya <hiten@unixdaemons.com>
2003-04-08 14:25:47 +00:00
Warner Losh
a163d034fa Back out M_* changes, per decision of the TRB.
Approved by: trb
2003-02-19 05:47:46 +00:00
Yoshihiro Takahashi
46c71b8146 Use correct spl mask.
Submitted by:	chi@bd.mbn.or.jp (Chiharu Shibata)
MFC after:	1 day
2003-02-10 13:31:49 +00:00
Alfred Perlstein
44956c9863 Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.
Merge M_NOWAIT/M_DONTWAIT into a single flag M_NOWAIT.
2003-01-21 08:56:16 +00:00
Sam Leffler
673d91916d network interface driver changes:
o don't strip the Ethernet header from inbound packets; pass packets
  up the stack intact (required significant changes to some drivers)
o reference common definitions in net/ethernet.h (e.g. ETHER_ALIGN)
o track ether_ifattach/ether_ifdetach API changes
o track bpf changes (use BPF_TAP and BPF_MTAP)
o track vlan changes (ifnet capabilities, revised processing scheme, etc.)
o use if_input to pass packets "up"
o call ether_ioctl for default handling of ioctls

Reviewed by:	many
Approved by:	re
2002-11-14 23:54:55 +00:00
Alfred Perlstein
e51a25f850 Remove __P. 2002-03-20 02:08:01 +00:00
Poul-Henning Kamp
6817526d14 Convert if_multiaddrs from LIST to TAILQ so that it can be traversed
backwards in the three drivers which want to do that.

Reviewed by:    mikeh
2001-02-06 10:12:15 +00:00
Poul-Henning Kamp
78d82c8c59 Use LIST_FOREACH() to traverse ifp->if_multiaddrs list, instead of
<sys/queue.h> implementation details.

Created with:   /usr/sbin/sed
Reviewed with:  /sbin/md5
2001-02-03 16:29:10 +00:00
Poul-Henning Kamp
9005f14a3b Remove unused #includes.
Approved by:	nyan
2000-10-31 08:22:26 +00:00
Yoshihiro Takahashi
0a917604f0 Added NEC PC-9801-83, 84, PC-9801-103, 104, PC-9801N-25 and PC-9801N-J02R
support which use National Semiconductor DP8393X (SONIC) as ethernet
controller. Currently, this driver is used on only PC-98.

Submitted by:	Motomichi Matsuzaki <mzaki@e-mail.ne.jp>
Obtained from:	NetBSD/pc98
2000-10-02 14:27:20 +00:00