enabling the functions that save and restore MXCSR, since access to this
register requires SSE support.
Note that you may run into other issues with OpenMP on i386, since this
*not* yet supported upstream, and certainly not extensively tested.
PR: 236062, 236582
MFC after: 1 month
X-MFC-With: r344779
When processing mtree(5) MANIFEST files, makefs(8) previously threw an
error if it encountered an entry whose "time" attribute contained a
non-zero subsecond component (e.g. time=1551620152.987220000).
Update the handling logic to properly assign the subsecond component if
built with nanosecond support, or silently discard it otherwise.
Also, re-enable the time attribute for the kyua tests.
PR: 194703
Submitted by: Mitchell Horne <mhorne063@gmail.com>
Differential Revision: https://reviews.freebsd.org/D19627
OpenBSD and NetBSD provide macros to directly reference the underlying
struct timespec's tv_nsec member. While FreeBSD has such macros for
tv_sec, the others are missing. Add the following macros:
st->st_atimensec
st->st_mtimensec
st->st_ctimensec
st->st_birthtimensec
Adding these fields will provide programs which reference them better
portability to FreeBSD. An example of such a program is makefs(8),
which has unused support for subseconds that it has inherited from
NetBSD.
Submitted by: Mitchell Horne <mhorne063@gmail.com>
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D19626
on scalbn and a few other math functions, via libcompiler-rt. This
should allow OpenMP programs to link with BFD linkers too.
Reported by: jbeich
PR: 236062, 236581
MFC after: 1 month
X-MFC-With: r344779
o most of data structures and relations were modified to be able support
large number of translation states. Now each supported protocol can
use full ports range. Ports groups now are belongs to IPv4 alias
addresses, not hosts. Each ports group can keep several states chunks.
This is controlled with new `states_chunks` config option. States
chunks allow to have several translation states for single alias address
and port, but for different destination addresses.
o by default all hash tables now use jenkins hash.
o ConcurrencyKit and epoch(9) is used to make NAT64LSN lockless on fast path.
o one NAT64LSN instance now can be used to handle several IPv6 prefixes,
special prefix "::" value should be used for this purpose when instance
is created.
o due to modified internal data structures relations, the socket opcode
that does states listing was changed.
Obtained from: Yandex LLC
MFC after: 1 month
Sponsored by: Yandex LLC
The line was misedited to change tt to st instead of
changing ut to st.
The use of st as the denominator in mul64_by_fraction() will lead
to an integer divide fault in the intr proc (the process holding
ithreads) where st will be 0. This divide by 0 happens after
the total runtime for all ithreads exceeds 76 hours.
Submitted by: bde
Some applications forward from/to host rings most or all the
traffic received or sent on a physical interface. In this
cases it is desirable to have more than a pair of RX/TX host
rings, and use multiple threads to speed up forwarding.
This change adds support for multiple host rings. On registering
a netmap port, the user can specify the number of desired receive
and transmit host rings in the nr_host_tx_rings and nr_host_rx_rings
fields of the nmreq_register structure.
MFC after: 2 weeks
CLAT is customer-side translator that algorithmically translates 1:1
private IPv4 addresses to global IPv6 addresses, and vice versa.
It is implemented as part of ipfw_nat64 kernel module. When module
is loaded or compiled into the kernel, it registers "nat64clat" external
action. External action named instance can be created using `create`
command and then used in ipfw rules. The create command accepts two
IPv6 prefixes `plat_prefix` and `clat_prefix`. If plat_prefix is ommitted,
IPv6 NAT64 Well-Known prefix 64:ff9b::/96 will be used.
# ipfw nat64clat CLAT create clat_prefix SRC_PFX plat_prefix DST_PFX
# ipfw add nat64clat CLAT ip4 from IPv4_PFX to any out
# ipfw add nat64clat CLAT ip6 from DST_PFX to SRC_PFX in
Obtained from: Yandex LLC
Submitted by: Boris N. Lytochkin
MFC after: 1 month
Relnotes: yes
Sponsored by: Yandex LLC
Add second IPv6 prefix to generic config structure and rename another
fields to conform to RFC6877. Now it contains two prefixes and length:
PLAT is provider-side translator that translates N:1 global IPv6 addresses
to global IPv4 addresses. CLAT is customer-side translator (XLAT) that
algorithmically translates 1:1 IPv4 addresses to global IPv6 addresses.
Use PLAT prefix in stateless (nat64stl) and stateful (nat64lsn)
translators.
Modify nat64_extract_ip4() and nat64_embed_ip4() functions to accept
prefix length and use plat_plen to specify prefix length.
Retire net.inet.ip.fw.nat64_allow_private sysctl variable.
Add NAT64_ALLOW_PRIVATE flag and use "allow_private" config option to
configure this ability separately for each NAT64 instance.
Obtained from: Yandex LLC
MFC after: 1 month
Sponsored by: Yandex LLC
Update node flags when driver supports SMPS, not when it is disabled or
in dynamic mode ((iv_htcaps & HTCAP_SMPS) != 0).
Checked with RTL8188EE (1T1R), STA mode - 'smps' word should disappear
from 'ifconfig wlan0' output.
MFC after: 2 weeks
The old implementation, at the VFS layer, would map the entire range of
logical blocks between the starting offset and the first data block
following that offset. With large sparse files this is very
inefficient. The VFS currently doesn't provide an interface to improve
upon the current implementation in a generic way.
Add ufs_bmap_seekdata(), which uses the obvious algorithm of scanning
indirect blocks to look for data blocks. Use it instead of
vn_bmap_seekhole() to implement SEEK_DATA.
Reviewed by: kib, mckusick
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19598
functionality. This should make example OpenMP programs work out of the
box.
Reported by: jbeich
PR: 236062, 236581
MFC after: 1 month
X-MFC-With: r344779
It seems my subconcious plan in r345088 to not only prefer IPv6 autoconf
but to also slowly deteriorate legacy IP auto-configuration was uncovered
way too early.
In case IPv6 is a thing yet ipv6_autoconfif was not true, we would not
bring up the interface yet tell the follow-up DHCPv4 configuration in
ifconfig_up() that we did. So unless you were doing SYNCDHCP or IPv6
you would not get legacy-IP DHCPv4 configuration.
I see multiple problems here: (a) people not yet using IPv6 (obviously a
problem), and (b) the dhclient startup script not running dhclient in
that case despite configured to do so (needs to be investigated seperately).
Reported by: Pawel Biernacki (pawel.biernacki gmail.com)
Tested by: Pawel Biernacki
Differential Revision: https://reviews.freebsd.org/D19488
Pointyhat to: bz (not sure if it is for breaking or
for letting them notice it so easily)
Without this dependency relationship, the linker doesn't find the
flash_register_slicer() function, so kldload fails to load fdt_slicer.ko.
Discussed with: ian@
* Set MK_OPENMP to yes by default only on amd64, for now.
* Bump __FreeBSD_version to signal this addition.
* Ensure gcc's conflicting omp.h is not installed if MK_OPENMP is yes.
* Update OptionalObsoleteFiles.inc to cope with the conflicting omp.h.
* Regenerate src.conf(5) with new WITH/WITHOUT fragments.
Relnotes: yes
PR: 236062
MFC after: 1 month
X-MFC-With: r344779
Not connected to the main build yet, as there is still the issue of the
GNU omp.h header conflicting with the LLVM one. (That is, if MK_GCC is
enabled.)
PR: 236062
MFC after: 1 month
X-MFC-With: r344779
to contrib/llvm. This is not yet connected to the build, the glue for
that will come in a follow-up commit.
PR: 236062
MFC after: 1 month
X-MFC-With: r344779
Add the infrastructure to allow MD procctl(2) commands, and use it to
introduce amd64 PTI control and reporting. PTI mode cannot be
modified for existing pmap, the knob controls PTI of the new vmspace
created on exec.
Requested by: jhb
Reviewed by: jhb, markj (previous version)
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D19514
PTI mode for the process pmap on exec is activated iff P_MD_PTI is set.
On exec, the existing vmspace can be reused only if pti mode of the
pmap matches the P_MD_PTI flag of the process. Add MD
cpu_exec_vmspace_reuse() callback for exec_new_vmspace() which can
vetoed reuse of the existing vmspace.
MFC note: md_flags change struct proc KBI.
Reviewed by: jhb, markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D19514
When the pmap with pti disabled (i.e. pm_ucr3 == PMAP_NO_CR3) is
activated, tss.rsp0 was not updated. Any interrupt that happen before
next context switch would use pti trampoline stack for hardware frame
but fault and interrupt handlers are not prepared to this. Correctly
update tss.rsp0 for both PMAP_NO_CR3 and pti pmaps.
Note that this case, pti = 1 but pmap->pm_ucr3 == PMAP_NO_CR3 is not
used at the moment.
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D19514
Previously the main pfsync lock and the bucket locks shared the same name.
This lead to spurious warnings from WITNESS like this:
acquiring duplicate lock of same type: "pfsync"
1st pfsync @ /usr/src/sys/netpfil/pf/if_pfsync.c:1402
2nd pfsync @ /usr/src/sys/netpfil/pf/if_pfsync.c:1429
It's perfectly okay to grab both the main pfsync lock and a bucket lock at the
same time.
We don't need different names for each bucket lock, because we should always
only acquire a single one of those at a time.
MFC after: 1 week
Looks like the example was broken by change of SYSCTL_STATIC_CHILDREN
definition in r267992. Fix build by switching to using SYSCTL_ADD_ROOT_NODE
PR: 236139
Submitted by: Andrew Reiter <arr@watson.org>
MFC after: 1 week
This mutes the duplicate target warning emitted via bsd.files.mk each build.
MFC after: 1 week
Reviewed by: asomers
Approved by: emaste (mentor)
Differential Revision: https://reviews.freebsd.org/D19603
This change integrates the unit tests for zfsd into the test suite using the
integration method described in r345203.
This change removes the `LOCALBASE` includes added for the port version of
googlemock/googletest, as well as unnecessary `LIBADD`/`DPADD` and `CXXFLAGS`
defines, which are included in the `GTEST_CXXFLAGS` variable, as part of
r345203.
Reviewed by: asomers
Approved by: emaste (mentor)
MFC after: 2 months
MFC with: r345203
Differential Revision: https://reviews.freebsd.org/D19552
This initial integration takes googlemock/googletest release 1.8.1, integrates
the library, tests, and sample unit tests into the build.
googlemock/googletest's inclusion is optionally available via `MK_GOOGLETEST`.
`MK_GOOGLETEST` is dependent on `MK_TESTS` and is enabled by default when
built with a C++11 capable toolchain.
Google tests can be specified via the `GTESTS` variable, which, in comparison
with the other test drivers, is more simplified/streamlined, as Googletest only
supports C++ tests; not raw C or shell tests (C tests can be written in C++
using the standard embedding methods).
No dependent libraries are assumed for the tests. One must specify `gmock`,
`gmock_main`, `gtest`, or `gtest_main`, via `LIBADD` for the program.
More information about googlemock and googletest can be found on the
Googletest [project page](https://github.com/google/googletest), and the
[GoogleMock](https://github.com/google/googletest/blob/v1.8.x/googlemock/docs/Documentation.md)
and
[GoogleTest](https://github.com/google/googletest/tree/v1.8.x/googletest/docs)
docs.
These tests are originally integrated into the build as plain driver tests, but
will be natively integrated into Kyua in a later version.
Known issues/Errata:
* [WhenDynamicCastToTest.AmbiguousCast fails on FreeBSD](https://github.com/google/googletest/issues/2172)
Reviewed by: asomers
Approved by: emaste (mentor)
MFC after: 2 months
Differential Revision: https://reviews.freebsd.org/D19551
`arc_reclaim_thread()` calls `arc_adjust()` after calling
`arc_kmem_reap_now()`; `arc_adjust()` signals `arc_get_data_buf()` to
indicate that we may no longer be `arc_is_overflowing()`.
The problem is, `arc_kmem_reap_now()` can take several seconds to
complete, has no impact on `arc_is_overflowing()`, but due to how the
code is structured, can impact how long the ARC will remain in the
`arc_is_overflowing()` state.
The fix is to use seperate threads to:
1. keep `arc_size` under `arc_c`, by calling `arc_adjust()`, which
improves `arc_is_overflowing()`
2. keep enough free memory in the system, by calling
`arc_kmem_reap_now()` plus `arc_shrink()`, which improves
`arc_available_memory()`.
illumos/illumos-gate@de753e34f9
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Dan McDonald <danmcd@joyent.com>
Reviewed by: Tim Kordas <tim.kordas@joyent.com>
Approved by: Garrett D'Amore <garrett@damore.org>
Author: Brad Lewis <brad.lewis@delphix.com>
use them without redefining the value names. New clang no longer
allows to redefine a enum value name to the same value.
Bump __FreeBSD_version, since ports depend on that.
Discussed with: jhb
At this point, all routes should've already been dropped by removing all
members from the bridge. This condition is in-fact KASSERT'd in the line
immediately above where this nop flush was added.
At this point, all routes should've already been dropped by removing all
members from the bridge. This condition is in-fact KASSERT'd in the line
immediately above where this nop flush was added.