alpha, operations involving non-finite numbers or denormalised numbers
or operations which should generate such numbers will cause an arithmetic
exception. For programs which follow some strict code generation rules,
the kernel trap handler can then 'complete' the operation by emulating
the faulting instruction.
To use software completion, a program must be compiled with the arguments
'-mtrap-precision=i' and '-mfp-trap-mode=su' or '-mfp-trap-mode=sui'.
Programs compiled in this way can use non-finite and denormalised numbers
at the expense of slightly less efficient code generation of floating
point instructions. Programs not compiled with these options will receive
a SIGFPE signal when non-finite or denormalised numbers are used or
generated.
Reviewed by: John Polstra <jdp@polstra.com>
structure for the alpha. These give extra information about some
signals (such as SIGSEGV) and should be compatible with Digital Unix.
Submitted by: jdp
* Update drivers to the latest version of the bus interface.
The ISA drivers' use of the new resource api is minimal. Garrett has
some much cleaner drivers which should be more easily shared between
i386 and alpha. This has only been tested on cia based machines. It
should work on lca and apecs but I might have broken something.
truncated to 32 bits.
* Change the calling convention of the device mmap entry point to
pass a vm_offset_t instead of an int for the offset allowing
devices with a larger memory map than (1<<32) to be supported
on the alpha (/dev/mem is one such).
These changes are required to allow the X server to mmap the various
I/O regions used for device port and memory access on the alpha.
manipulation away from the length comparison. Measurements on beast.cdrom.com
show >3X improvement over the original code on large block sizes, putting the
performance on par with the optimized assembly code in libc.
a vga.
* Fix broken logic in syscons for a failed probe.
* Fix AlphaStation 500/600 so that non-serial consoles are supported.
Submitted by: Thomas Valentino Crimi <tcrimi+@andrew.cmu.edu> (vga bits),
Andrew Gallatin <gallatin@cs.duke.edu> (AS500/AS600)
installed.
Remove cpu_power_down, and replace it with an entry at the end of the
SHUTDOWN_FINAL queue in the only place it's used (APM).
Submitted by: Some ideas from Bruce Walter <walter@fortean.com>
and dies if it can't find the MFS root whereas the x86 one seems to sail
past. Looking at the code, I can't see how either one works, so I'm
confused. :)
This is the bulk of the support for doing kld modules. Two linker_sets
were replaced by SYSINIT()'s. VFS's and exec handlers are self registered.
kld is now a superset of lkm. I have converted most of them, they will
follow as a seperate commit as samples.
This all still works as a static a.out kernel using LKM's.
independent elf loader and have access to kld modules. Jordan and I were
not sure how to create boot floppies, and the things we tried just made
SRM laugh in our faces - but it was upset at boot1 which was not touched
by these changes. Essentially this has been untested. :-(
What this does is to steal the last three slots from the nine spare longs
in the bootinfo_v1 struct to pass the module base pointer through.
The startup code now to set up and fills in the module and environment
structures, hopefully close enough to the i386 layout to be able to use
the same kernel code. We now pass though the updated end of the kernel
space used, rather than _end. (like the i386).
If this does not work, it needs to be beaten into shape pronto. Otherwise
it should be backed out before 3.0.
Pre-approved in principle by: dfr
Change the ELF registration/unregistration scheme to be less error prone.
Adding a new brand requires a single addition to linux_brandlist instead of
modifying linux_load(), linux_unload(), and linux_elf_init().
Approved by: jkh
Reviewed by: msmith
routines are necessary to allow the use of certain types of hardware on
the alpha, particularly a Myrinet card.
Submitted by: Andrew Gallatin <gallatin@cs.duke.edu>
address for the LCA PCI configuration register address.
FreeBSD/Alpha now boots on the NoName (aka AXPpci 33, Alpha PC), and probably
also on the Multia (mine hasn't arrived yet, so I can't tell for sure).
Submitted by: Doug Rabson <dfr@freebsd.org>
and set_regs() but for the floating point register state. The code
is stolen from procfs_machdep.c, and moved out of there into
machdep.c.
These functions are needed for generating ELF core dumps.
the relevant characteristics of the native machine, for building
and checking Elf_Ehdr structures.
Add structures to represent ELF "note" headers. Add defines for the
note types used in ELF core files.
object format of the executable being dumped. This is the first
step toward producing ELF core dumps in the proper format. I will
commit the code to generate the ELF core dumps Real Soon Now. In
the meantime, ELF executables won't dump core at all. That is
probably no less useful than dumping a.out-style core dumps as they
have done until now.
Submitted by: Alex <garbanzo@hooked.net> (with very minor changes by me)
standard places ("/etc/objformat", ${OBJFORMAT}, argv) for an
indication of the user's preferred object file format. This
consolidates some code that was starting to be duplicated in more
and more places.
Use the new function in ldconfig.
Note: I don't think that gcc should use getobjformat(), even though
it could. The compiler should limit itself to functions that are
widespread, to ease porting and cross-compilation.
XFree86 server, users need to create the following links in their
/compat/linux/dev directory (assuming kernel configured with 4 VTs).
lrwxrwxrwx 1 root wheel 7 Aug 30 22:59 tty0 -> console
lrwxrwxrwx 1 root wheel 5 Aug 30 22:45 tty1 -> ttyv0
lrwxrwxrwx 1 root wheel 5 Aug 30 22:45 tty2 -> ttyv1
lrwxrwxrwx 1 root wheel 5 Aug 30 22:45 tty3 -> ttyv2
lrwxrwxrwx 1 root wheel 5 Aug 30 22:45 tty4 -> ttyv3
VT switching is still not yet supported. Attempting to switch VT
currently will cause Xserver bus error.
Submitted by: Chain Lee <chain@110.net>
Add some overflow checks to read/write (from bde).
Change all modifications to vm_page::flags, vm_page::busy, vm_object::flags
and vm_object::paging_in_progress to use operations which are not
interruptable.
Reviewed by: Bruce Evans <bde@zeta.org.au>
* Support for AlphaStation 200, 250, 255, 400
* Untested support for UDB, Multia, AXPpci33 (Noname)
* Support for Personal Workstation 433a/433au, 500a/500au, 600a/600au (Miata)
* Some minor fixes and improvements to interrupt handling.
Submitted by: Andrew Gallatin <gallatin@cs.duke.edu> (AS200, Miata)
Obtained from: NetBSD (some code for AS200, Miata, Noname)
hopefully become a portable driver usable by all architectures. The api
support files have had to be copied to sys/alpha/include since userland
programs expect to find them in <machine/*.h>.
All the revision history of the i386 syscons has been retained by a
repository copy.
saver and splash screen can all work properly with syscons. Note that
the splash screen option (SC_SPLASH_SCREEN) does not work yet, as it
requires additional code from msmith.
- Reorganized the splash screen code to match the latest development
in this area.
- Delay screen switch in `switch_scr()' until the screen saver is
stopped, if one is running,
- Start the screen saver immediately, if any, when the `saver' key is
pressed. (There will be another commit for `kbdcontrol' to support
this keyword in the keymap file.)
- Do not always stop the screen saver when mouse-related ioctls
are called. Stop it only if the mouse is moved or buttons are
clicked; don't stop it if any other mouse ioctls are called.
2. Added provision to write userland screen savers. (Contact me if you
are interested in writing one.)
- Added CONS_IDLE, CONS_SAVERMODE, and CONS_SAVERSTART ioctls to
support userland screen savers.
3. Some code clean-ups.
Sparse macros have moved to <machine/swiz.h>.
Fix sparse memory access so that it actually works as intended.
Tidy up sparse configuration access slightly.
but isn't valid.
Reimplement pmap_remove() to be much more efficient at removing large
stretches of addresses.
As part of reimplementing pmap_remove() fix pmap_protect() so that it stands
a hope of working.
suitable for holding object pointers (ptrint_t -> uintptr_t).
Added corresponding signed type (intptr_t). Changed/added
corresponding non-C9x types for function pointers to match. Don't
use nonstandard types to implement these types, and don't comment
on them in <machine/types.h>.
least unsuitable for holding an object pointer. This should have been
used to fix warnings about casts between pointers and ints on alphas.
Moved corresponding existing general typedef (fptrint_t) for function
pointers from the i386 <machine/profile.h> to a kernel-only typedef
in <machine/types.h>. Kludged libc/gmon/mcount.c so that it can
still see this typedef.
is the kernel part of my commits, the userlevel stuff will be done in
a separate commit. Add the ability to suspend as well as hibernate to
syscons. Create a new virtual key like hibernate for suspend. Update
apm_bios.h to define more apm bios goodies.
mask address around when registering interrupts is wrong IMHO. We should
use a priority level like IPL_BIO and the lower levels can then translate
it into a mask if they want.
Submitted by: Randall Hopper <rhh@ct.picker.com>
The patch supports using the X10 Mouse Remote in both stand-alone and
pass-through configurations, so you can plug your mouse and remote into the
same serial port, use the mouse for X, and use the remote for other apps
like Fxtv. For instance, we can now control fxtv via the remote control
just like a TV : change channels, mute, increase volume, zoom video,
freeze frame 8)
The mouse events are channeled through the syscons/sysmouse I/F like
normal, and the remote buttons are "syphoned off" to a UNIX-domain stream
socket (defined as _PATH_MOUSEREMOTE in <machine/mouse.h>) for a
remote-aware app to grab and use.
For further info on the X10 Mouse Remote see:
http://www.x10.com/products/x10_mk19a.htm
Major changes to the generic device framework for FreeBSD/alpha:
* Eliminate bus_t and make it possible for all devices to have
attached children.
* Support dynamically extendable interfaces for drivers to replace
both the function pointers in driver_t and bus_ops_t (which has been
removed entirely. Two system defined interfaces have been defined,
'device' which is mandatory for all devices and 'bus' which is
recommended for all devices which support attached children.
* In addition, the alpha port defines two simple interfaces 'clock'
for attaching various real time clocks to the system and 'mcclock'
for the many different variations of mc146818 clocks which can be
attached to different alpha platforms. This eliminates two more
function pointer tables in favour of the generic method dispatch
system provided by the device framework.
Future device interfaces may include:
* cdev and bdev interfaces for devfs to use in replacement for specfs
and the fixed interfaces bdevsw and cdevsw.
* scsi interface to replace struct scsi_adapter (not sure how this
works in CAM but I imagine there is something similar there).
* various tailored interfaces for different bus types such as pci,
isa, pccard etc.
* Eliminate bus_t and make it possible for all devices to have
attached children.
* Support dynamically extendable interfaces for drivers to replace
both the function pointers in driver_t and bus_ops_t (which has been
removed entirely. Two system defined interfaces have been defined,
'device' which is mandatory for all devices and 'bus' which is
recommended for all devices which support attached children.
* In addition, the alpha port defines two simple interfaces 'clock'
for attaching various real time clocks to the system and 'mcclock'
for the many different variations of mc146818 clocks which can be
attached to different alpha platforms. This eliminates two more
function pointer tables in favour of the generic method dispatch
system provided by the device framework.
Future device interfaces may include:
* cdev and bdev interfaces for devfs to use in replacement for specfs
and the fixed interfaces bdevsw and cdevsw.
* scsi interface to replace struct scsi_adapter (not sure how this
works in CAM but I imagine there is something similar there).
* various tailored interfaces for different bus types such as pci,
isa, pccard etc.
work in progress and has never booted a real machine. Initial
development and testing was done using SimOS (see
http://simos.stanford.edu for details). On the SimOS simulator, this
port successfully reaches single-user mode and has been tested with
loads as high as one copy of /bin/ls :-).
Obtained from: partly from NetBSD/alpha
FreeBSD/alpha. The most significant item is to change the command
argument to ioctl functions from int to u_long. This change brings us
inline with various other BSD versions. Driver writers may like to
use (__FreeBSD_version == 300003) to detect this change.
The prototype FreeBSD/alpha machdep will follow in a couple of days
time.
