This is in preparation for booting via loader(8). Lift these macros from arm64
so we don't need to worry about the size when inserting new elements. This
could have been done in r359673, but I didn't think I would be returning to
this function so soon.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D24910
For userland, MACHINE_ARCH reflects the current ABI via preprocessor
directives. For the kernel, the hw.machine_arch sysctl uses the ELF
header flags of the current process to select the correct MACHINE_ARCH
value.
Reviewed by: imp, kp
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24543
Replace our hand-rolled functions with the generic ones provided by
kern/subr_physmem.c. This greatly simplifies the initialization of
physical memory regions and kernel globals.
Tested by: nick
Differential Revision: https://reviews.freebsd.org/D24154
The location of the device-tree blob is passed to the kernel by the
previous booting stage (i.e. BBL or OpenSBI). Currently, we leave it
untouched and mark the 1MB of memory holding it as unavailable.
Instead, do what is done by other fake_preload_metadata() routines and
copy to the DTB to KVA space. This is more in line with what loader(8)
will provide us in the future, and it allows us to reclaim the hole in
physical memory.
Reviewed by: markj, kp (earlier version)
Differential Revision: https://reviews.freebsd.org/D24152
Use __riscv_flen instead of __riscv_float_abi_soft. While the latter works for
userland (and one could argue it's more correct), it fails for the kernel. We
compile the kernel with -mabi=lp64 (eg soft float abi) to avoid floating point
instructions in the kernel. We also compile the kernel -march=rv64imafdc for
hard float kernels (eg those with options FPE), but with -march=rv64imac for
softfloat kernels (eg those with FPE). Since we do this, in the kernel (as in
userland) __riscv_flen will be defined for 'riscv64' and not for 'riscv64sf'.
This also removes the -DMACHINE_ARCH hack now that it's no longer needed.
Longer term, we should return the ABI from the sysctl hw.machine_arch like on
amd64 for i386 binaries.
Suggested by: mhorne@
Differential Revision: https://reviews.freebsd.org/D23813
MACHINE_ARCH sets the hw.machine_arch sysctl in the kernel. In userspace
it sets MACHINE_ARCH in bmake, which bsd.cpu.mk uses to configure the
target ABI for ports.
For riscv64sf builds (i.e. soft-float) that needs to be riscv64sf, but
the sysctl didn't reflect that. It is static.
Set the define from the riscv makefile so that we correctly reflect our
actual build (i.e. riscv64 or riscv64sf), depending on what TARGET_ARCH
we were built with.
That still doesn't satisfy userspace builds (e.g. bmake), so check if
we're building with a software-floating point toolchain there. That
check doesn't work in the kernel, because it never uses floating point.
Reviewed by: philip (previous version), mhorne
Sponsored by: Axiado
Differential Revision: https://reviews.freebsd.org/D23741
While cause codes higher than 16 are reserved, the exception code
field of the register is defined to be all bits but the upper-most
bit.
Reviewed by: mhorne
MFC after: 1 week
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D23510
This fixes continuing from debug.kdb.enter=1 after enabling the use of
compressed instructions since the compiler can emit the two byte
c.ebreak instead of the 4 byte ebreak.
Reviewed by: br
MFC after: 1 week
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D23507
This reverts r177661. The change is no longer very useful since
out-of-tree KLDs will be built to target SMP kernels anyway. Moveover
it breaks the KBI in !SMP builds since cpuset_t's layout depends on the
value of MAXCPU, and several kernel interfaces, notably
smp_rendezvous_cpus(), take a cpuset_t as a parameter.
PR: 243711
Reviewed by: jhb, kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23512
cpu_switch/throw() and savectx() do not save or restore any values in
these fields which mostly held non-callee-save registers.
makectx() copied these fields from kdb_frame, but they weren't used
except for PC_REGS using pcb_sepc. Change PC_REGS to use
kdb_frame->tf_sepc directly instead.
Reviewed by: br
MFC after: 2 weeks
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D23395
The SD bit is defined as the MSB of the sstatus register, meaning its
position will vary depending on the CSR's length. Previously, there were
two (unused) defines for this, for the 32 and 64-bit cases, but their
definitions were swapped.
Consolidate these into one define: SSTATUS_SD, and make the definition
dependent on the value of __riscv_xlen.
Reviewed by: br
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D23402
This is a 32-bit structure embedded in each vm_page, consisting mostly
of page queue state. The use of a structure makes it easy to store a
snapshot of a page's queue state in a stack variable and use cmpset
loops to update that state without requiring the page lock.
This change merely adds the structure and updates references to atomic
state fields. No functional change intended.
Reviewed by: alc, jeff, kib
Sponsored by: Netflix, Intel
Differential Revision: https://reviews.freebsd.org/D22650
o Remove All Rights Reserved from my notices
o imp@FreeBSD.org everywhere
o regularize punctiation, eliminate date ranges
o Make sure that it's clear that I don't claim All Rights reserved by listing
All Rights Reserved on same line as other copyright holders (but not
me). Other such holders are also listed last where it's clear.
SBI version 0.2 introduces functions for obtaining the details of the
SBI implementation, such as version and implemntation ID. Print this
info at startup when it is available.
Reviewed by: jhb, kp
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D22327
Allow for an additional argument to sbi_call which will be passed in a6.
This is required for SBI spec 0.2 support, as a6 will indicate the SBI
function ID.
While here, introduce some macros to clean up the calls.
Reviewed by: kp, jhb
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D22325
The lr.w instruction used to read the value from memory sign-extends
the value read from memory. GCC sign-extends the 32-bit comparison
value passed in whereas clang currently does not. As a result, if the
value being compared has the MSB set, the comparison fails for
matching 32-bit values when compiled with clang.
Use a cast to explicitly sign-extend the unsigned comparison value.
This works with both GCC and clang.
There is commentary in the RISC-V spec that suggests that GCC's
approach is more correct, but it is not clear if the commentary in the
RISC-V spec is binding.
Reviewed by: mhorne
Obtained from: Axiado
MFC after: 2 weeks
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D22084
We must also check for large mappings. pmap_page_is_mapped() is
mostly used in assertions, so the problem was not very noticeable.
Reviewed by: alc
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D21824
Many extern struct pcpu <something>__pcpu declarations were
copied/pasted in sources. The issue is that the definition is MD, but
it cannot be provided by machine/pcpu.h due to actual struct pcpu
defined in sys/pcpu.h later than the inclusion of machine/pcpu.h.
This forced the copying when other code needed direct access to
__pcpu. There is no way around it, due to machine/pcpu.h supplying
part of struct pcpu fields.
To work around the problem, add a new machine/pcpu_aux.h header, which
should fill any needed MD definitions after struct pcpu definition is
completed. This allows to remove copies of __pcpu spread around the
source. Also on x86 it makes it possible to remove work arounds like
OFFSETOF_CURTHREAD or clang specific warnings supressions.
Reported and tested by: lwhsu, bcran
Reviewed by: imp, markj (previous version)
Discussed with: jhb
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D21418
doing so adds more flexibility with less redundant code.
Reviewed by: jhb, markj, kib
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21250
AT_HWCAP is a field in the elf auxiliary vector meant to describe
cpu-specific hardware features. For RISC-V we want to use this to
indicate the presence of any standard extensions supported by the CPU.
This allows userland applications to query the system for supported
extensions using elf_aux_info(3).
Support for an extension is indicated by the presence of its
corresponding bit in AT_HWCAP -- e.g. systems supporting the 'c'
extension (compressed instructions) will have the second bit set.
Extensions advertised through AT_HWCAP are only those that are supported
by all harts in the system.
Reviewed by: jhb, markj
Approved by: markj (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20493
The gp register is intended to used by the linker as another means of
performing relaxations, and should point to the small data section (.sdata).
Currently gp is being used as the pcpu pointer within the kernel, but the more
appropriate choice for this is the tp register, which is unused.
Swap existing usage of gp with tp within the kernel, and set up gp properly
at boot with the value of __global_pointer$ for all harts.
Additionally, remove some cases of accessing tp from the PCB, as it is not
part of the per-thread state. The user's tp and gp should be tracked only
through the trapframe.
Reviewed by: markj, jhb
Approved by: markj (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D19893
from SiFive, Inc.
The first core on this SoC (hart 0) is a 64-bit microcontroller.
o Pick a hart to run boot process using hart lottery.
This allows to exclude hart 0 from running the boot process.
(BBL releases hart 0 after the main harts, so it never wins the lottery).
o Renumber CPUs early on boot.
Exclude non-MMU cores. Store the original hart ID in struct pcpu. This
allows to find out the correct destination for IPIs and remote sfence
calls.
Thanks to SiFive, Inc for the board provided.
Reviewed by: markj
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D20225
RISC-V ISA specifies no cache management instructions so leave cache
operations in cpufunc.h as no-op for now.
Note some new hardware comes with their own memory-mapped cache
management controller.
Tested on HiFive Unleashed board with cgem(4).
Reviewed by: markj
Obtained from: arm64
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D20126
In certain scenarios, it is possible for PCPU data to be
accessed before it has been initialized (e.g. during printf
if the kernel was built with the TSLOG option).
Initialize the PCPU pointer for hart 0 at the beginning of
initriscv() rather than near the end.
Reviewed by: markj
Approved by: markj (mentor)
Differential Revision: https://reviews.freebsd.org/D19726
Add the infrastructure to allow MD procctl(2) commands, and use it to
introduce amd64 PTI control and reporting. PTI mode cannot be
modified for existing pmap, the knob controls PTI of the new vmspace
created on exec.
Requested by: jhb
Reviewed by: jhb, markj (previous version)
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D19514
Skylake Xeons.
See SDM rev. 68 Vol 3 4.6.2 Protection Keys and the description of the
RDPKRU and WRPKRU instructions.
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D18893
This reduces the overhead of TLB invalidations by ensuring that we
only interrupt CPUs which are using the given pmap. Tracking is
performed in pmap_activate(), which gets called during context switches:
from cpu_throw(), if a thread is exiting or an AP is starting, or
cpu_switch() for a regular context switch.
For now, pmap_sync_icache() still must interrupt all CPUs.
Reviewed by: kib (earlier version), jhb
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18874
This includes support for pmap_enter(..., psind=1) as described in the
commit log message for r321378.
The changes are largely modelled after amd64. arm64 has more stringent
requirements around superpage creation to avoid the possibility of TLB
conflict aborts, and these requirements do not apply to RISC-V, which
like amd64 permits simultaneous caching of 4KB and 2MB translations for
a given page. RISC-V's PTE format includes only two software bits, and
as these are already consumed we do not have an analogue for amd64's
PG_PROMOTED. Instead, pmap_remove_l2() always invalidates the entire
2MB address range.
pmap_ts_referenced() is modified to clear PTE_A, now that we support
both hardware- and software-managed reference and dirty bits. Also
fix pmap_fault_fixup() so that it does not set PTE_A or PTE_D on kernel
mappings.
Reviewed by: kib (earlier version)
Discussed with: jhb
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18863
Differential Revision: https://reviews.freebsd.org/D18864
Differential Revision: https://reviews.freebsd.org/D18865
Differential Revision: https://reviews.freebsd.org/D18866
Differential Revision: https://reviews.freebsd.org/D18867
Differential Revision: https://reviews.freebsd.org/D18868
The existing copyin(9) and copyout(9) routines on RISC-V perform only a
simple byte-by-byte copy. Improve their performance by performing
word-sized copies where possible.
Submitted by: Mitchell Horne <mhorne063@gmail.com>
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18851
The sbadaddr register was renamed in version 1.10 of the privileged
architecture specification. No functional change intended.
Submitted by: Mitchell Horne <mhorne063@gmail.com>
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18594
This adds more detail and fixes some inaccuracies.
Reviewed by: jhb
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18463
Add a subroutine for updating satp, for use when updating the
active pmap. No functional change intended.
Reviewed by: jhb
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18462
The RISC-V spec defines several performance counter CSRs such as: cycle,
time, instret, hpmcounter(3...31). They are defined to be 64-bits wide
on all RISC-V architectures. On RV64 and RV128 they can be read from a
single CSR. On RV32, additional CSRs (given the suffix "h") are present
which contain the upper 32 bits of these counters, and must be read as
well. (See section 2.8 in the User ISA Spec for full details.)
This change adds macros for reading these values safely on any RISC-V
ISA length. Obviously we aren't supporting anything other than RV64
at the moment, but this ensures we won't need to change how we read
these values if we ever do.
Submitted by: Mitchell Horne <mhorne063@gmail.com>
Reviewed by: jhb
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D17952
Replace a call to DELAY(1) with a new cpu_lock_delay() KPI. Currently
cpu_lock_delay() is defined to DELAY(1) on all platforms. However,
platforms with a DELAY() implementation that uses spin locks should
implement a custom cpu_lock_delay() doesn't use locks.
Reviewed by: kib
MFC after: 3 days
Previously, RISC-V was enabling execute permissions in PTEs for any
readable page. Now, execute permissions are only enabled if they were
explicitly specified (e.g. via PROT_EXEC to mmap). The one exception
is that the initial kernel mapping in locore still maps all of the
kernel RWX.
While here, change the fault type passed to vm_fault and
pmap_fault_fixup to only include a single VM_PROT_* value representing
the faulting access to match other architectures rather than passing a
bitmask.
Reviewed by: markj
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D17783
All platforms except powerpc use the same values and powerpc shares a
majority of them.
Go ahead and declare AT_NOTELF, AT_UID, and AT_EUID in favor of the
unused AT_DCACHEBSIZE, AT_ICACHEBSIZE, and AT_UCACHEBSIZE for powerpc.
Reviewed by: jhb, imp
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17397
(e.g. RocketChip, lowRISC and derivatives).
RISC-V page table entries support A (accessed) and D (dirty) bits. The
spec makes hardware support for these bits optional. Implementations that
do not manage these bits in hardware raise page faults for accesses to a
valid page without A set and writes to a writable page without D set.
Check for these types of faults when handling a page fault and fixup the
PTE without calling vm_fault if they occur.
Reviewed by: jhb, markj
Approved by: re (gjb)
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17424
(e.g. RocketChip, lowRISC and derivatives).
RISC-V page table entries support A (accessed) and D (dirty) bits. The
spec makes hardware support for these bits optional. Implementations that
do not manage these bits in hardware raise page faults for accesses to a
valid page without A set and writes to a writable page without D set.
Check for these types of faults when handling a page fault and fixup the
PTE without calling vm_fault if they occur.
Reviewed by: jhb, markj
Approved by: re (gjb)
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17424
- Remove the arm64-specific cpu_*cache* and cpu_tlb_flush* functions.
Instead, add RISC-V specific inline functions in cpufunc.h for the
fence.i and sfence.vma instructions.
- Catch up to changes in the arm64 pmap and remove all the cpu_dcache_*
calls, pmap_is_current, pmap_l3_valid_cacheable, and PTE_NEXT bits from
pmap.
- Remove references to the unimplemented riscv_setttb().
- Remove unused cpu_nullop.
- Add a link to the SBI doc to sbi.h.
- Add support for a 4th argument in SBI calls. It's not documented but
it seems implied for the asid argument to SBI_REMOVE_SFENCE_VMA_ASID.
- Pass the arguments from sbi_remote_sfence*() to the SEE. BBL ignores
them so this is just cosmetic.
- Flush icaches on other CPUs when they resume from kdb in case the
debugger wrote any breakpoints while the CPUs were paused in the IPI_STOP
handler.
- Add SMP vs UP versions of pmap_invalidate_* similar to amd64. The
UP versions just use simple fences. The SMP versions use the
sbi_remove_sfence*() functions to perform TLB shootdowns. Since we
don't have a valid pm_active field in the riscv pmap, just IPI all
CPUs for all invalidations for now.
- Remove an extraneous TLB flush from the end of pmap_bootstrap().
- Don't do a TLB flush when writing new mappings in pmap_enter(), only if
modifying an existing mapping. Note that for COW faults a TLB flush is
only performed after explicitly clearing the old mapping as is done in
other pmaps.
- Sync the i-cache on all harts before updating the PTE for executable
mappings in pmap_enter and pmap_enter_quick. Previously the i-cache was
only sync'd after updating the PTE in pmap_enter.
- Use sbi_remote_fence() instead of smp_rendezvous in pmap_sync_icache().
Reviewed by: markj
Approved by: re (gjb, kib)
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D17414
- Explicitly load an empty initial state into FP registers when taking
the fault on the first FP instruction in a thread. Setting
SSTATE.FS to INITIAL is just a marker to let context switch restore
code know that it can load FP registers with zeroes instead of
memory loads. It does not imply that the hardware will reset all
registers to zero on first access. In addition, set the state to
CLEAN instead of INITIAL after the first FP instruction.
cpu_switch() doesn't do anything for INITIAL and only restores from
the pcb if the state is CLEAN. We could perhaps change cpu_switch
to call fpe_state_clear if the state was INITIAL and leave SSTATE.FS
set to INITIAL instead of CLEAN after the first FP instruction.
However, adding this complexity to cpu_switch() doesn't seem worth
the supposed gain.
- Only save the current FPU registers in fill_fpregs() if the request
is made to save the current thread's registers. Previously if a
debugger requested FP registers via ptrace() it was getting a copy
of the debugger's FP registers rather than the debugee's.
- Zero the entire FP register set structure returned for ptrace() if a
thread hasn't used FP registers rather than leaking garbage in the
fp_fcsr field.
- If a debugger writes FP registers via ptrace(), always mark the pcb
as having valid FP registers and set SSTATUS.FS_MASK to CLEAN so
that the registers will be restored when the debugged thread
resumes.
- Be more explicit about clearing the SSTATUS.FS field before setting
it to CLEAN on the first FP instruction trap.
Submitted by: br, markj
Approved by: re (rgrimes)
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D17141
