Allow 'bectl list' to sort output by a given property name. The property
name is passed in using a command-line flag, '-c' for ascending order and
'-C' for descending order. The properties allowed to sort by are:
- name (the default output, even if '-c' or '-C' are not used)
- creation
- origin
- used
- usedds
- usedsnap
- usedrefreserv
The default output for 'bectl list' is now ascending alphabetical order of
BE name.
To sort by creation time from earliest to latest, the command would be
'bectl list -c creation'
Submitted by: Rob Fairbanks <rob.fx907 gmail com>
Reviewed by: ler
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D20818
This code has been written as a proof of concept, but I think that it
can be useful in general. It allows to set the status of an enclosure
slot. Practically, this means controlling whatever slot status LEDs the
enclosure provides. At present, the new command does not have sanity
checks or any conveniences. That means that it is possible to issue the
command for an invalid slot and an enclosure. But the worst I have seen
happening is either the command failing or simply being ignored. Also,
at the moment, the status has to be specified as a numeric bit mask.
The bit definitions can be found in sys/dev/mps/mpi/mpi2_init.h, they
are prefixed with MPI2_SEP_REQ_SLOTSTATUS_. The only way to address a
slot is by the enclosure handle and the slot number. Both are readily
available from mpsutil show commands.
So, future enhancements could include alternative ways to address a slot
(e.g., by a disk handle or a disk device name) and human friendly names
for slot statuses.
The new command is useful alternative to 'sas2ircu locate' command.
First, sas2ircu is a proprietary blob. Second, it supports setting only
locate / identify status bit.
Tested on HP H220 running LSI IT firmware 20.x.
Reviewed by: bapt
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D20535
This fixes a hole in the situation where the resume state is left from
receiving a new dataset and, so, the state is set on the dataset itself
(as opposed to %recv child).
Additionally, distinguish incremental and resume streams in error
messages.
This was also committed to ZoL:
zfsonlinux/zfs@ebeb6f23bf
MFC after: 2 weeks
Sponsored by: CyberSecure
- Use ptoa() instead of the archaic ctob().
- Use pagezero() to zero a PDP page.
- Remove PA_MIN_ADDRESS, orphaned by r351742.
- Remove unneeded parens and an unnecessary control flow statement.
Reported by: alc
Reviewed by: alc, kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21495
Currently LOCAL_MODULES= works, but LOCAL_MODULES="" causes build errors as
.for still has the empty string to loop over. An .if empty prior to the loop
was considered, but LOCAL_MODULES has empty quotes at that point and thus,
isn't empty. A better solution likely exists, but this floats us by for
now...
GEOM is supposed to be topology-agnostic, but the GPT and BSD partition code
has arbitrary restrictions on nesting that are annoying in cases such as
running VMs on raw partitions (since the VM's partitioning scheme is not
visible to the host).
This patch adds sysctls to disable the restrictions except in the case of
BSD label (and similar) partitions with offset 0 (where we need to avoid
recursively recognizing the label).
Submitted by: Andrew Gierth
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D21350
r351650 switched posixshm to using OBJT_SWAP for shm_object
r351795 added support to the swap_pager for tracking writeable mappings
Take advantage of this and start tracking writeable mappings; fd sealing
will use this to reject a seal on writing with EBUSY if any such mapping
exist.
Reviewed by: kib, markj
Differential Revision: https://reviews.freebsd.org/D21456
Currently writemapping accounting is only done for vnode_pager which does
some accounting on the underlying vnode.
Extend this to allow accounting to be possible for any of the pager types.
New pageops are added to update/release writecount that need to be
implemented for any pager wishing to do said accounting, and we implement
these methods now for both vnode_pager (unchanged) and swap_pager.
The primary motivation for this is to allow other systems with OBJT_SWAP
objects to check if their objects have any write mappings and reject
operations with EBUSY if so. posixshm will be the first to do so in order to
reject adding write seals to the shmfd if any writable mappings exist.
Reviewed by: kib, markj
Differential Revision: https://reviews.freebsd.org/D21456
from recent Ubuntu versions. Without it they segfault on startup.
Reviewed by: emaste
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20687
* Convert the TCP delayed ACK timer from ms to ticks as required.
This fixes the timer on platforms with hz != 1000.
* Don't delay acknowledgements which report duplicate data using
DSACKs.
Reviewed by: rrs@
MFC after: 1 week
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D21512
It allows a process to request that stack gap was not applied to its
stacks, retroactively. Also it is possible to control the gaps in the
process after exec.
PR: 239894
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D21352
With this last piece in place, make -C /usr/src/release release.iso is
finally able to run in a jail. This was not possible before because
msdosfs cannot be mounted inside a jail.
Submitted by: ryan@ixsystems.com
Reviewed by: emaste@, imp@, gjb@
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D21385
The fsync flag performs an fsync(2) on the output file before closing it.
This will be useful for the ZFS test suite.
Submitted by: ryan@ixsystems.com
Reviewed by: jilles@, imp@
MFC after: 1 week
Sponsored by: iXsystems, Inc.
These will be expanded later as I come up with good test cases; for now,
these seem to be enough to trigger bugs in base gnugrep and expose missing
features in bsdgrep.
vnodes have 2 reference counts - holdcnt to keep the vnode itself from getting
freed and usecount to denote it is actively used.
Previously all operations bumping usecount would also bump holdcnt, which is
not necessary. We can detect if usecount is already > 1 (in which case holdcnt
is also > 1) and utilize it to avoid bumping holdcnt on our own. This saves
on atomic ops.
Reviewed by: kib
Tested by: pho (previous version)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21471
When we suspend, we need to properly shutdown the NVME controller. The
controller may go into D3 state (or may have the power removed), and
to properly flush the metadata to non-volatile RAM, we must complete a
normal shutdown. This consists of deleting the I/O queues and setting
the shutodown bit. We have to do some extra stuff to make sure we
reset the software state of the queues as well.
On resume, we have to reset the card twice, for reasons described in
the attach funcion. Once we've done that, we can restart the card. If
any of this fails, we'll fail the NVMe card, just like we do when a
reset fails.
Set is_resetting for the duration of the suspend / resume. This keeps
the reset taskqueue from running a concurrent reset, and also is
needed to prevent any hw completions from queueing more I/O to the
card. Pass resetting flag to nvme_ctrlr_start. It doesn't need to get
that from the global state of the ctrlr. Wait for any pending reset to
finish. All queued I/O will get sent to the hardware as part of
nvme_ctrlr_start(), though the upper layers shouldn't send any
down. Disabling the qpairs is the other failsafe to ensure all I/O is
queued.
Rename nvme_ctrlr_destory_qpairs to nvme_ctrlr_delete_qpairs to avoid
confusion with all the other destroy functions. It just removes the
queues in hardware, while the other _destroy_ functions tear down
driver data structures.
Split parts of the hardware reset function up so that I can
do part of the reset in suspsend. Split out the software disabling
of the qpairs into nvme_ctrlr_disable_qpairs.
Finally, fix a couple of spelling errors in comments related to
this.
Relnotes: Yes
MFC After: 1 week
Reviewed by: scottl@ (prior version)
Differential Revision: https://reviews.freebsd.org/D21493
Queue operations on a page use the page lock when updating the page to
reflect the desired queue state, and the page queue lock when physically
enqueuing or dequeuing a page. Multiple pages share a given page lock,
but queue state is per-page; this false sharing results in heavy lock
contention.
Take a small step towards the use of atomic_cmpset to synchronize
updates to per-page queue state by introducing vm_page_pqstate_cmpset()
and using it in the page daemon. In the longer term the plan is to stop
using the page lock to protect page identity and rely only on the object
and page busy locks. However, since the page daemon avoids acquiring
the object lock except when necessary, some synchronization with a
concurrent free of the page is required. vm_page_pqstate_cmpset() can
be used to ensure that queue state updates are successful only if the
page is not scheduled for a dequeue, which is sufficient for the page
daemon.
Add vm_page_swapqueue(), which moves a page from one queue to another
using vm_page_pqstate_cmpset(). Use it in the active queue scan, which
does not use the object lock. Modify vm_page_dequeue_deferred() to
use vm_page_pqstate_cmpset() as well.
Reviewed by: kib
Discussed with: jeff
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21257
r351198 allows the kernel to use domain-local memory to back the vm_page
array (up to 2MB boundaries) and reserves a separate PML4 entry for that
purpose. One consequence of that change is that the vm_page array is no
longer present in minidumps, which only adds pages mapped above
VM_MIN_KERNEL_ADDRESS.
To avoid the friction caused by having kernel data structures mapped
below VM_MIN_KERNEL_ADDRESS, map the vm_page array starting at
VM_MIN_KERNEL_ADDRESS instead of using a dedicated PML4 entry.
Reviewed by: kib
Discussed with: jeff
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21491
Previously userspace would issue one syscall to resolve the sysctl and then
another one to actually use it. Do it all in one trip.
Fallback is provided in case newer libc happens to be running on an older
kernel.
Submitted by: Pawel Biernacki
Reported by: kib, brooks
Differential Revision: https://reviews.freebsd.org/D17282
The sysctl is called vm.pmap.kernel_maps. It dumps address ranges
and their corresponding protection and mapping mode, as well as
counts of 2MB and 1GB pages in the range.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21380
The lowest SACK block is used when multiple Blocks would be elegible as
DSACK blocks ACK blocks get reordered - while maintaining the ordering of
SACK blocks not relevant in the DSACK context is maintained.
Reviewed by: rrs@, tuexen@
Obtained from: Richard Scheffenegger
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D21038
glibc 2.24 and up (eg Ubuntu 19.04) fail with "FATAL: kernel too old".
This alone is not enough to make newer binaries actually work;
fix/hack/workaround is pending review at https://reviews.freebsd.org/D20687.
Reviewed by: emaste
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20757
polling within a second. Panic if we don't. All the commands that use this
interface should typically complete within a few tens to hundreds of
microseconds. Panic rather than return ETIMEDOUT because if the command somehow
does later complete, it will randomly corrupt memory. Also, it helps to get a
traceback from where the unexpected failure happens, rather than an infinite
loop.
dump support code, move the while loop into an inline function. These aren't
done in the fast path, so if the compiler choses to not inline, any performance
hit is tiny.
polled interface. Normally this would have the potential to corrupt stack memory
because the completion routines would run after we return. In this case,
however, we're doing a dump so it's safe for reasons explained in the comment.
'compat.linux.osrelease=3.10.0-957.12.1.el7.x86_64', which
corresponds to CentOS 7.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20685
The initially read mount point can already be NULL.
Reported by: markj
Fixes: r351656 ("vfs: stop refing freed mount points in vop_stdgetwritemount")
Sponsored by: The FreeBSD Foundation
Parentheses added to HASZERO macro to avoid a GCC warning.
Reviewed by: kib, mjg
Obtained from: musl (snapshot at commit 4d0a82170a)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17631
There is no correctness change here, but the procid lock is contended in
the fork path and taking it while holding proctree avoidably extends its
hold time.
Note that there are other ids which can end up getting cleared with the
lock.
Sponsored by: The FreeBSD Foundation
In the past, this allocator seems to have allocated things larger than
a page seperately. Much of this code was removed at some point (perhaps
along with sbrk() used) so remove the rest. Instead, keep allocating in
power-of-two bins up to FIRST_BUCKET_SIZE << (NBUCKETS - 1). If we want
something more efficent, we should use a fancier allocator.
While here, remove some vestages of sbrk() use. Most importantly, don't
try to page align the pagepool since it's always page aligned by mmap().
Reviewed by: kib
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D21453