Major changes from v429:
* Don't pass "-" to non-pipe LESSOPEN unless it starts with "-".
* Allow a fraction as the argument to the -# (--shift) option.
* Fix highlight bug when underlined/overstruck text matches at end of line.
* Fix non-regex searches with ctrl-R.
Approved by: re (kensmith, kib)
when memory page caching attributes changed, and CPU does not support
self-snoop, but implemented clflush, for i386.
Take care of possible mappings of the page by sf buffer by utilizing
the mapping for clflush, otherwise map the page transiently. Amd64
used direct map.
Proposed and reviewed by: alc
Approved by: re (kensmith)
provide specific macros, AUDIT_ARG_UPATH1() and AUDIT_ARG_UPATH2()
to capture path information for audit records. This allows us to
move the definitions of ARG_* out of the public audit header file,
as they are an implementation detail of our current kernel-internal
audit record, which may change.
Approved by: re (kensmith)
Obtained from: TrustedBSD Project
MFC after: 1 month
top of ZVOLs. The problem is that rc.d/fsck runs before rc.d/zfs. The
latter makes ZVOLs to appear in /dev/. In such case rc.d/fsck cannot
find devfs entry and aborts. We cannot simply move rc.d/zfs before
rc.d/fsck, because we first want kern.hostid to be configured (by
rc.d/hostid). If we won't wait (hostid will be 0) we can reuse disks
which are in use by different systems (eg. in SAN/NAS environment).
We also cannot move rc.d/hostid before rc.d/fsck, because rc.d/hostid on
first system start stores generated kern.hostuuid in /etc/hostid file,
so it needs root file system to be mounted read-write.
The fix is to split rc.d/hostid so that rc.d/hostid (which will now run
before rc.d/fsck) only generates hostid and sets up sysctls, but doesn't
touch root file system and rc.d/hostid_save (which is run after
rc.d/root) and only creates /etc/hostid file.
With that in place, we can move ZVOL initialization to dedicated
rc.d/zvol script which runs before rc.d/fsck.
PR: conf/120194
Reported by: James Snow <snow@teardrop.org>
Reviewed by: brooks
Approved by: re (kib)
MFC after: 2 weeks
Receipt of a specially-crafted dynamic update message may
cause BIND 9 servers to exit. This vulnerability affects all
servers -- it is not limited to those that are configured to
allow dynamic updates. Access controls will not provide an
effective workaround.
More details can be found here: https://www.isc.org/node/474
All BIND users are encouraged to update to a patched version ASAP.
Approved by: re (re -> SO -> dougb)
to avoid exposing ARG_ macros/flag values outside of the audit code in
order to name which one of two possible vnodes will be audited for a
system call.
Approved by: re (kib)
Obtained from: TrustedBSD Project
MFC after: 1 month
instead of the root/current working directory as the starting point for
lookups. Up to two such descriptors can be audited. Add audit record
BSM encoding for fooat(2).
Note: due to an error in the OpenBSM 1.1p1 configuration file, a
further change is required to that file in order to fix openat(2)
auditing.
Approved by: re (kib)
Reviewed by: rdivacky (fooat(2) portions)
Obtained from: TrustedBSD Project
MFC after: 1 month
L2 information. For an indirect route the cached L2 entry contains the
MAC address of the gateway. Typically the default route is used to
transmit multicast packets when explicit multicast routes are not
available. The ether_output() function bypasses L2 resolution function
if it verifies the L2 cache is valid, because the cached L2 address
(a unicast MAC address) is copied into the packets as the destination
MAC address. This validation, however, does not apply to broadcast and
multicast packets because the destination MAC address is mapped
according to a standard method instead.
Submitted by: Xin Li
Reviewed by: bz
Approved by: re
processing code holds the read lock (when processing a
FWD-TSN for pr-sctp). If it finds stranded data that
can be given to the application, it calls sctp_add_to_readq().
The readq function also grabs this lock. So if INVAR is on
we get a double recurse on a non-recursive lock and panic.
This fix will change it so that readq() function gets a
flag to tell if the lock is held, if so then it does not
get the lock.
Approved by: re@freebsd.org (Kostik Belousov)
MFC after: 1 week
The Portsnap buildbox now generates teh bits needed for portsnap to produce
INDEX-8; and it hasn't built INDEX-5 for a long time, although the bits are
still distributed for an INDEX-5 from when FreeBSD 5.x reached its EoL.
Approved by: re (kib)
MFC after: 3 days (INDEX-8 addition only)
- Allow loopback route to be installed for address assigned to
interface of IFF_POINTOPOINT type.
- Install loopback route for an IPv4 interface addreess when the
"useloopback" sysctl variable is enabled. Similarly, install
loopback route for an IPv6 interface address when the sysctl variable
"nd6_useloopback" is enabled. Deleting loopback routes for interface
addresses is unconditional in case these sysctl variables were
disabled after an interface address has been assigned.
Reviewed by: bz
Approved by: re
old ABI versions of the relevant control system call (e.g.
freebsd7_freebsd32_msgctl() instead of freebsd32_msgctl() for msgsys()).
Approved by: re (kib)
panic when in zfs_fuid_create_cred() when userid is negative. It is
converted to unsigned value which makes IS_EPHEMERAL() macro to
incorrectly report that this is ephemeral ID. The most reasonable
solution for now is to always report that the given ID is not ephemeral.
PR: kern/132337
Submitted by: Matthew West <freebsd@r.zeeb.org>
Tested by: Thomas Backman <serenity@exscape.org>, Michael Reifenberger <mike@reifenberger.com>
Approved by: re (kib)
MFC after: 2 weeks
* don't clobber proxy entries
* HWMP seq number processing, including discard of old frames
* flush routing table entries based on nexthop
* print route flags in ifconfig
* more debugging messages and comments
Proxy changes submitted by sam.
Approved by: re (kib)
requesting IDENTIFY from slave device first. This order is important
for proper cable type detection by master device.
PR: kern/136438
Approved by: re (kib)
things a bit:
- use dpcpu data to track the ifps with packets queued up,
- per-cpu locking and driver flags
- along with .nh_drainedcpu and NETISR_POLICY_CPU.
- Put the mbufs in flight reference count, preventing interfaces
from going away, under INVARIANTS as this is a general problem
of the stack and should be solved in if.c/netisr but still good
to verify the internal queuing logic.
- Permit changing the MTU to virtually everythinkg like we do for loopback.
Hook epair(4) up to the build.
Approved by: re (kib)
(ifconfig ifN (-)vnet <jname|jid>) work correctly.
Move vi_if_move to if.c and split it up into two functions(*),
one for each ioctl.
In the reclaim case, correctly set the vnet before calling if_vmove.
Instead of silently allowing a move of an interface from the current
vnet to the current vnet, return an error. (*)
There is some duplicate interface name checking before actually moving
the interface between network stacks without locking and thus race
prone. Ideally if_vmove will correctly and automagically handle these
in the future.
Suggested by: rwatson (*)
Approved by: re (kib)
- fix ifconfig to ignore the non-existent interface in the current
network stack in case of '-vnet'.
- in ifconfig: actually use the local variables defined for the
vnet functions rather than modifying the global.
Reviewed by: rwatson
Approved by: re (kib)
but returned them incorrectly, causing tar to actually
erase the resulting file while trying to restore the
link. This one-line fix corrects the hardlink descriptions
to avoid this problem.
Thanks to Jung-uk Kim for pointing this out.
Approved by: re (kib)
restrictions) were found to be inadequately described by a boolean.
Define a new parameter type with three values (disable, new, inherit)
to handle these and future cases.
Approved by: re (kib), bz (mentor)
Discussed with: rwatson
to 'Expert Mode', to make it less confusing to new users, to whom
a 'wizard' is a set of simple dialogs with the 'next >>>' button.
Approved by: re (kensmith)
ability to retrieve the group list of each process.
Modify procstat's -s option to query this mib when the kinfo_proc
reports that the field has been truncated. If the mib does not exist,
fall back to the truncated list.
Reviewed by: rwatson
Approved by: re (kib)
MFC after: 2 weeks
- When a vlan event occurs a check was not made that
the event was actually for the interface, thus resulting
in a panic. All three drivers have this vulnerability. Add
a check for this condition.
- Secondly, there was a duplicate buf_ring free in the em
driver resulting in a panic on unload. Remove.
Approved by: re
part that is made up of 8K banks rather than 4K, if these
systems are using bank 1 then the last change in this code
breaks the bank read, resulting in an invalid checksum of
the eeprom during driver load. This change fixes this.
Approved by: re
o do not force monitor mode; the wlanX ifnet must be an ahdemo mode vap
o move channel change work before marking ifnet up to avoid churning
the state machine
o change default ifnet name to "wlan0"
Approved by: re (kensmith)
