As of ipfilter 5.1.2 the IPv4 and IPv6 rules tables have been merged.
The ipf(8) -6 option has been a NOP since then. Currently the additional
ipf -6 load statement in rc.d/ipfilter simply added the second ipfilter
rules file to the table already populated by the previous ipf command.
Plenty of time has passed since ipfilter 5.1.2 was imported. It is time to
remove the option from rc.conf and the rc script.
Differential Revision: https://reviews.freebsd.org/D28615
Fix e40787f900 to make libexec/rc/rc.d/linux retrieve the sysctl
after loading the kernel module which provides it, not before.
Reported By: jkim
Sponsored By: The FreeBSD Foundation
In /etc/rc.d/linux the mounting paths of procfs, sysfs and devfs
are hardcoded to "/compat/linux". Switching to the content of
compat.linux.emul_path sysctl would allow to switch linuxulator
to different place.
Submitted by: freebsdnewbie_freenet.de
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27807
When a library is opened via fdlopen, it has a null pointer for its path
and so _rtld_bind can crash as a result of passing the null pointer to
basename() (which passes it to strrchr(), which doesn't do a null check).
PR: 253081
Submitted by: theraven
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D28442
This eliminates a lot of stat() calls that happen when lualoader renders the
menu with the default settings, and greatly speeds up rendering on my
laptop.
ftype is nil if loader/loader.efi hasn't been updated yet, falling back to
lfs.attributes() to test.
This is technically incompatible with lfs, but not in a particularly
terrible way.
Reviewed-by: cem
MFC-after: 4 days
Differential Revision: https://reviews.freebsd.org/D27542
auditd creates a pidfile so we should use it for status checks.
This also seems to speed up the frequent onestatus checks used in
tests/sys/audit.
Reviewed By: asomers
Differential Revision: https://reviews.freebsd.org/D28389
In order to reduce the pre-requisites of this file, implement the
pattern matching and creation of a temporary test directory without
use of grep respectively mktemp.
The new version makes it possible to provide a writable /tmp in any
case and independently of other local or remote file systems (except /
and /dev) being mounted.
The use of "dd if=/dev/random" has the same dependency on /dev/random
being operational as the previous version that used "mktemp". If this
is found to be an issue on platforms that do not have gathered
sufficient entropy at the time when this scriot is run, I suggest to
replace the "dd" command with "ps lauxww" to get a somewhat random
test directory name.
Approved by: rgrimes, glebius, cy
MFC after: 4 weeks
Differential Revision: https://reviews.freebsd.org/D28209
depend on FILESYSTEMS run mktemp(1). For systems that have read-only
root this is broken until memory disk based /tmp is instantiated. At
least 'os-release' and 'motd' are subject to this problem.
Reviewed by: ngie
Differential Revision: https://reviews.freebsd.org/D28097
remote filesystems. Discussed this with Brooks and he can't find
evidence that provoked the change in 2005. If anything gets broken
I will fix it in a different way, not via rc sequence change.
Discussed with: brooks
Reviewed by: ngie
Differential Revision: https://reviews.freebsd.org/D28097
the following warning printed at boot time:
rcorder: requirement `ipfs' in file `/etc/rc.d/netif' has no providers.
Close that using BEFORE rather than REQUIRE for writing down
dependencies of optional components.
This was disconnected from the build in 2001 in commit 66422f5b7a
with a comment that it was long overdue even then.
Sponsored by: The FreeBSD Foundation
This makes text segment relocation work under W^X.
Submitted by: Greg V <greg@unrelenting.technology> (original version)
Reviewed by: kib
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D27953
to prevent obliteration of error value from the original syscall.
Also improve error message for short read.
Submitted by: Konrad Sewiłło-Jopek
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27864
Statically link rtld-elf with libcompiler_rt on all architectures so
that we don't need to try to pick and choose the bits we need from it
for each architecture (we now leave that to the linker). Compilers may
emit calls to support functions in this library, but because of the use
of the linker flag -nostdlib for rtld's special needs, the library is
not linked as normal.
Previously we had two different solutions. On some architectures, we
were able to extract reimplementations of the necessary builtin
functions from our special build of libc. On ARM, we just linked
libcompiler_rt.
This is motivated by the same issue as D26199 and D27665, but should be
a simpler solution that will apply to all architectures.
Reviewed by: arichardson, kib
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D27736
This fixes the gcc9 build of rtld-elf32 on amd64, which needed an
implementation of udivmoddi4.
rtld-elf uses certain functions normally found in libc, and so it
includes certain files from libc in its own build. It has two
mechanisms to include files from libc: one that rebuilds source files in
the rtld-elf environment, and one that extracts object files from a
purpose-built no-SSP PIC archive.
In addition to libc functions, rtld-elf may need to link functions
normally found in libcompiler_rt (formerly libgcc). Now, add an ability
to rebuild libcompiler_rt source files in the rtld-elf environment. We
don't yet have a need for an object file extraction mechanism.
libcompiler_rt could also supply udivdi3 and umoddi3, but leave them
alone for now.
Reviewed by: arichardson, kib
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D27665
ar cr is an update of an archive, not a creation of a new one. During
incremental builds (e.g. with meta mode) the archive was not getting
cleaned, and so could retain now-deleted objects from previous builds.
Now, delete the archive before creating/updating it.
Reviewed by: arichardson, bdrewery, kib
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D27663
Although it is not often needed, the nfscbd(8) should be running when
NFSv4 mounts are done if callback functionality is required.
Callback functionality is required for the NFSv4 server to issue
delegations or pNFS layouts.
This patch adds nfscbd to the mountcritremote's REQUIRED line
to ensure it is started before NFS mounts specified in /etc/fstab
are done.
Reviewed by: 0mp
Differential Revision: https://reviews.freebsd.org/D27506
Follow-up to r353959 and r368070: do the same for other architectures.
arm32 already seems to use its own .fnstart/.fnend directives, which
appear to be ARM-specific variants of the same thing. Likewise, MIPS
uses .frame directives.
Reviewed by: arichardson
Differential Revision: https://reviews.freebsd.org/D27387
r366857 created a number of problems, tearing down interfaces too
early in shutdown. This resulted in:
- hung ssh sessions when shutting down or rebooting remotely using
shutdown (I've used exec shutdown, for years, as apposed to simply
shutdown).
- NFS mounted filesystems "disappear" prior to unmount.
- dhclient attached to a VLAN on an interface who's parent interface
has already shut down prints errors.
The path forward is to teach lagg(4) and vlan(4) about WOL.
PR: 251531, 251540
PR: 158734, 109980 are broken again
Reported by: jhb, emaste, jtl, Helge Oldach<freebsd_oldach.net>
Martin Birgmeier <d8zNeCFG_aon.at>
MFC after: Immediately
Discussion at: https://reviews.freebsd.org/D27459
Enable ND6_IFF_IFDISABLED when the interface is created in the
kernel before return to user space.
This avoids a race when an interface is create by a program which
also calls ifconfig IF inet6 -ifdisabled and races with the
devd -> /etc/pccard_ether -> .. netif start IF -> ifdisabled
calls (the devd/rc framework disabling IPv6 again after the program
had enabled it already).
In case the global net.inet6.ip6.accept_rtadv was turned on,
we also default to enabling IPv6 on the interfaces, rather than
disabling them.
PR: 248172
Reported by: Gert Doering (gert greenie.muc.de)
Reviewed by: glebius (, phk)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D27324
The problem is that zfs is asked to stop too early in the shutdown
sequence. Other services, such as syslog may still be running and have some
files open (e.g., under /var/log). This of course causes the messages like:
cannot unmount '/var/run': umount failed
cannot unmount '/var/log': umount failed
cannot unmount '/var': umount failed
cannot unmount '/usr/home': umount failed
cannot unmount '/usr': umount failed
cannot unmount '/': umount failed
For now, let's remove the shutdown KEYWORD from the zfs service, as people are
reporting problems in their setups:
https://lists.freebsd.org/pipermail/freebsd-current/2020-November/077559.html
In the future, we may think of stopping zfs on shutdown after all the other
services and just before init(8) exits. Another interesting option might be to
a new rcorder(8) KEYWORD like "shutdownjail", but this idea would need to be
discussed a bit.
Reported by: Johan Hendriks <joh.hendriks gmail.com>
Reported by: Yasuhiro KIMURA <yasu utahime.org>
Reported by: Tomoaki AOKI <junchoon dec.sakura.ne.jp>
Approved by: kevans (src)
MFC: 3 days
Differential Revision: https://reviews.freebsd.org/D27263
meowthink@gmail.com reported that the gssd daemon was not
starting, because /etc/rc.d/gssd was executed before his local
/usr file system was mounted.
He fixed the problem by adding mountcritlocal to the REQUIRED
line.
This fix seems safe and works for a separately mounted /usr file
system on a local disk.
The case of a separately mounted remote /usr file system (such as
NFS) is still broken, but there is no obvious solution for that.
Adding mountcritremote would fix the problem, but it would
cause a POLA violation, because all kerberized NFS mounts
in /etc/fstab would need the "late" option specified to work.
Submitted by: meowthink@gmail.com
Reported by: meowthink@gmail.com
Reviewed by: 0mp
MFC after: 2 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D27203
r376026 added a new "-R" option to mountd, which tells it to
not support the Mount protocol (not used by NFSv4) and not
register with rpcbind.
Rpcbind is considered a security issue by some sites now.
This patch adds a new yes/no variable called nfsv4_server_only.
When that is set, make vfs.nfsd.server_min_vers=4 and set "=R"
for mountd.
Setting vfs.nfsd.server_min_vers=4 tells nfsd to not register with rpcbind.
While here, add a check for "load_kld nfsd" failing to nfsd.
Reviewed by: 0mp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D26938
The variable defaults to "/usr/local", unless sysctl returns some other
value for "user.localbase".
The value of user.localbase defaults to _PATH_LOCALBASE as defined in
paths.h and thus this commit has no immediate effect.
The purpose of this change is to make /etc/defaults/rc.conf automatically
use the value of _PATH_LOCALBASE when not set to the default value.
Reviewed by: imp, scottl
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D27014
The problem is that Without walling /etc/rc.d/zfs on shutdown, resources
associated with ZFS mounts are not freed and the jails will remain in dying
state. In addition, the dataset is now in a dangling state, as the jail it
is attached to is dying.
A known workaround for jails was to add the following lines
to /etc/jail.conf, to make sure that "service zfs stop" is run
when the jail is stopped:
exec.stop = "/bin/sh /etc/rc.shutdown";
exec.stop += "/usr/sbin/service zfs stop || /usr/bin/true";
While the workaround seems to be okay-ish for the jail situation, it is
still unclean. However, for physical hosts this may wreak havoc with the
pool if shared spares are used, as "zfs unshare" is never invoked on
shutdown.
PR: 147444
Submitted by: Markus Stoff <markus__stoffdv_at>
Reported by: Mykah <mburkhardt__exavault_com>
Reviewed by: cy
Approved by: cy (src)
MFC after: 1 week
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D27039
This is especially important during shutdown because a child interface
of lagg with WOL enabled will not enable WOL at interface shutdown and
thus no WOL to wake up the device (and machine).
PR: 158734, 109980
Reported by: Antonio Huete Jimenez <tuxillo at quantumachine.net>
Marat N.Afanasyev <marat at zealot.ksu.ru>
reviewed by: kp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D26797
- whitespace at end of input line
- skipping paragraph macro: Pp at the end of Sh
- new sentence, new line
- consider using OS macro: Fx
- AUTHORS section without An macro
- skipping paragraph macro: Pp before Ss
When a system with pf_enable="YES" in /etc/rc.conf uses hostnames in
/etc/pf.conf, these hostnames cannot be resolved via external nameservers
because the default route is not yet set. This results in an empty
(all open) ruleset.
Since r195026 already put netif back to REQUIRE, this change does not affect
the issue that the firewall should rather have been setup before any
network traffic can occur.
PR: 211928
Submitted by: Robert Schulze
Reported by: Robert Schulze
Tested by: Mateusz Kwiatkowski
No objections from: kp
MFC after: 3 days
Repeating the default WARNS here makes it slightly more difficult to
experiment with default WARNS changes, e.g. if we did something absolutely
bananas and introduced a WARNS=7 and wanted to try lifting the default to
that.
Drop most of them; there is one in the blake2 kernel module, but I suspect
it should be dropped -- the default WARNS in the rest of the build doesn't
currently apply to kernel modules, and I haven't put too much thought into
whether it makes sense to make it so.
Given that we have converted to ELFv2 for BE already, endianness is the only
difference between the two ARCHs.
As such, there is no need to differentiate LIBC_ARCH between the two.
Combining them like this lets us avoid needing to have two copies of several
bits for no good reason.
Sponsored by: Tag1 Consulting, Inc.
bootonce feature is temporary, one time boot, activated by
"bectl activate -t BE", "bectl activate -T BE" will reset the bootonce flag.
By default, the bootonce setting is reset on attempt to boot and the next
boot will use previously active BE.
By setting zfs_bootonce_activate="YES" in rc.conf, the bootonce BE will
be set permanently active.
bootonce dataset name is recorded in boot pool labels, bootenv area.
in case of nextboot, the nextboot_enable boolean variable is recorded in
freebsd:nvstore nvlist, also stored in boot pool label bootenv area.
On boot, the loader will process /boot/nextboot.conf if nextboot_enable
is "YES", and will set nextboot_enable to "NO", preventing /boot/nextboot.conf
processing on next boot.
bootonce and nextboot features are usable in both UEFI and BIOS boot.
To use bootonce/nextboot features, the boot loader needs to be updated on disk;
if loader.efi is stored on ESP, then ESP needs to be updated and
for BIOS boot, stage2 (zfsboot or gptzfsboot) needs to be updated
(gpart or other tools).
At this time, only lua loader is updated.
Sponsored by: Netflix, Klara Inc.
Differential Revision: https://reviews.freebsd.org/D25512
This would allow interested parties to do experimental runs with an
environment set appropriately to raise all the warnings throughout the
build; e.g. env WARNS=6 NO_WERROR=yes buildworld.
Not currently touching the numerous instances in ^/tools.
MFC after: 1 week
Currently, WITHOUT_PORTSNAP forces WITHOUT_FREEBSD_UPDATE because the
latter relies on phttpget, which lives inside the portsnap build bits.
Remove the dependency between these two options by moving phttpget out into
^/libexec and building/installing it if either WITH_PORTSNAP or
WITH_FREEBSD_UPDATE.
Future work could remove the conditional if it's decided that users will use
it independently of either the current in-base consumers.
Reported by: swills
Reviewed by: jilles, emaste
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D26255
This is consistent with how array inits are called, and also makes us
more compatible with glibc environment.
Requested by: Alex S <iwtcex@gmail.com>
PR: 249162
Reviewed by: dim, emaste
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D26351
Such objects can still have valid relocations not requiring symbolic
references.
PR: 249121
Reported by: wsh@riski.sh
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
If object has no dynamic phdr, do not try to dereference NULL. This
means that we cannot process any relocation, and that there cannot be
symbols defined, but it is up to static linker to produce meaningful
objects.
PR: 249121
Reported by: wsh@riski.sh
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
After OpenZFS import, zpool auto import behavior was moved to an
explicit "zpool import -a", and the zpool rc.d script was added
as a prerequisite of zvol.
However, in r299839, zvol was added as a prerequisite of dumpon,
making it to start very early and before all 'disks' providers.
At this time, dumping on a zvol is not supported, so remove this
requirement and make zpool depend on disks to allow zpool on
full disk encryption work.
Reviewed by: allanjude
Differential Revision: https://reviews.freebsd.org/D26333
This violated the RISC-V 64-bit ABI. On CheriBSD this manifested as
a trap when attempting to store 16-byte aligned types while zeroing
the stack.
Reported by: CHERI, jrtc27
Reviewed by: mhorne, br
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D26327
prior to zvol and mountcritlocal resulting in ZVOLs (swap and
virtual machine UFS filesystems) being unavailable, leading to
boot failures.
We move the zpool import from zfs to a new zpool script, with the
-N option to avoid mounting datasets while making the ZPOOL's
datasets available for "legacy" mount (mountpoint=legacy) and ZVOLs
available for subsequent use for swap (in the zvol rc sript) or
for UFS or other filesystems in fstab(5), mounted by mountcritlocal.
Reviewed by: freqlabs (previous version)
Differential Revision: https://reviews.freebsd.org/D26185
The primary benefit is maintaining a completely shared
code base with the community allowing FreeBSD to receive
new features sooner and with less effort.
I would advise against doing 'zpool upgrade'
or creating indispensable pools using new
features until this change has had a month+
to soak.
Work on merging FreeBSD support in to what was
at the time "ZFS on Linux" began in August 2018.
I first publicly proposed transitioning FreeBSD
to (new) OpenZFS on December 18th, 2018. FreeBSD
support in OpenZFS was finally completed in December
2019. A CFT for downstreaming OpenZFS support in
to FreeBSD was first issued on July 8th. All issues
that were reported have been addressed or, for
a couple of less critical matters there are
pull requests in progress with OpenZFS. iXsystems
has tested and dogfooded extensively internally.
The TrueNAS 12 release is based on OpenZFS with
some additional features that have not yet made
it upstream.
Improvements include:
project quotas, encrypted datasets,
allocation classes, vectorized raidz,
vectorized checksums, various command line
improvements, zstd compression.
Thanks to those who have helped along the way:
Ryan Moeller, Allan Jude, Zack Welch, and many
others.
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D25872
flua does have some specific bits that will include luaconf.h, but the
definition of LUA_USE_DLOPEN for those won't matter. This belongs in liblua
instead.
To expand on my previous commit, which was a little sparse with details,
it's not really safe to allow LUA_USE_DLOPEN with host lib paths being used.
The host system could have an entirely different lua version and this could
cause us to crash and burn.
If we want to revive this later, we need to make sure to define c module
paths inside OBJDIR that are compiled against whatever version we've
bootstrapped.
Pointy hat: kevans
are encountered at boot time:
rcorder: requirement `ipfs' in file `/etc/rc.d/netif' has no providers.
rcorder: requirement `ipfilter' in file `/etc/rc.d/netif' has no
providers.
rcorder: requirement `ipfilter' in file `/etc/rc.d/netwait' has no
providers.
rcorder: requirement `ipfilter' in file `/etc/rc.d/net_watchdog' has no
providers.
rcorder: requirement `ipfilter' in file `/etc/rc.d/securelevel' has no
providers.
Listing its own requrements in BEFORE rather than use REQUIRE of
non-optional scripts resolves this issue.
The issue was discovered and patched by glebius at Netflix.
Submitted by: glebius
Reported by: glebius
MFC after: 1 week
The space between words is already being echoed by the space between quoted strings:
% echo 'foo' 'bar'
foo bar
% echo 'foo' ' baz'
foo baz
Found in `ipfw` and `mountlate` messages.
PR: 247948
Submitted by: Jose Luis Duran <jlduran@gmail.com>
MFC after: 2 weeks
Sponsored by: Klara Inc.
In the last IFUNC related changes to rtld, the code that handled non-PLT
GNU IFUNC relocations ended up getting lost. This could leave some
relocations unhandled, causing crashes or misbehavior. This change restores
the handling of these relocations, but now together with the other IFUNC
relocations, allowing resolvers to reference external symbols.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D25550
This fixes Linux gettyname(3), with caveats (see PR).
PR: kern/240767
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25558
aout support in ldconfig hasn't been required since FreeBSD 2.x.
Anyone still using FreeBSD 2 shared libraries can use a FreeBSD 2
ldconfig to generate aout ldconfig hints.
Reviewed by: dim, kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24883
There are cases when gif_interfaces cannot be replaced
with cloned_interfaces, such as tunnels with external IPv6 addresses
and internal IPv4 or vice versa. Such configuration requires
extra invocation of ifconfig(8) and supported with gif_interfaces only.
MFC after: 1 week
libucl comes with a Lua library binding. Build it into flua.
This lets us parse/generate config files in the various formats supported by
libucl with flua. For example, the following script will detect the format of
an object written to stdin as one of UCL config, JSON, or YAML and write it to
stdout as pretty-printed JSON:
local ucl = require('ucl')
local parser = ucl.parser()
parser:parse_string(io.read('*a'))
local obj = parser:get_object()
print(ucl.to_format(obj, 'json'))
Reviewed by: kevans, pstef
Approved by: mmacy (mentor)
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D25009
This makes old ldd to still work on newer tagged PIE binaries.
Also move debug line for hashes before both decisions to not load are
done, so that the end of digest_dynamic() processing and reason to not
load or load is seen in debug trace.
Noted by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Which makes all calls to load_object() to observe the flag, except the
calls for preloaded DSOs.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Rtld itself is a shared object which does not have vendor note, so
after the direct exec of ld-elf.so.1 process has p_osrel set to zero.
This affects the ABI of syscalls.
Set osrel to the __FreeBSD_version value at compile time right after
rtld identified direct exec mode. Then, switch to the osrel read from
the binary note or zero if no note, right before starting calling
ifunc resolvers, which is the first byte of the user code.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Linkers are supposed to mark PIE binaries with DF_1_PIE, such binary
cannot be correctly and usefully loaded neither by dlopen(3) nor as a
dependency of other object. For instance, we cannot do anything
useful with COPY relocations, among other things.
Glibc already added similar restriction.
Requested and reviewed by: emaste
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D25086
It is wrong to relate on __FreeBSD_version, either from
include/param.h, kernel, or libc, to check for rtld features.
Rtld might be from newer world than the running userspace.
Add special private symbols exported by rtld itself, to indicate the
changes in runtime behavior, and features that cannot be otherwise
detected or deduced at runtime.
Note that the symbols are not exported from libc, so they intentionally
cannot be linked against, and exported from the private namespace from rtld.
Consumers are required to use dlsym(3). For instance, for
_rtld_version_laddr_offset, user should do
ptr = dlsym(RTLD_DEFAULT, "_rtld_version_laddr_offset")
or even
ptr = dlvsym(RTLD_DEFAULT, "_rtld_version_laddr_offset",
"FBSDprivate_1.0");
Non-null ptr means that the change is present.
Also add _rtld_version__FreeBSD_version indicator to report the
headers version used at time of the rtld build.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D24982
Keep link_map l_addr binary layout compatible, rename l_addr to l_base
where rtld returns map base. Provide relocbase in newly added l_addr.
This effectively reverts the patch to the initial version of D24918.
Reported by: antoine (portmgr)
Reviewed by: jhb, markj
Tested by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D24946
It previously returned the object map base address, while all other
ELF operating systems return load offset, i.e. the difference between
map base and the link base.
Explain the meaning of the field in the man page.
Stop filling the mips-only l_offs member, which is apparently unused.
PR: 246561
Requested by: Damjan Jovanovic <damjan.jov@gmail.com>
Reviewed by: emaste, jhb, cem (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D24918