This is compatible with GNU cmp.
Reviewed by: bapt, markj (earlier version)
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D32074
This is compatible with GNU cmp.
Reviewed by: bapt (earlier version), markj, imp
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D32071
Add the table page table attributes on arm64 and use them to add
restrictions to the block and page entries below them. This ensures
we are unable to increase the permissions in these last level entries
without also changing them in the upper levels.
Use the attributes to ensure the kernel can't execute from userspace
memory and vice versa, userspace has no access to read or write kernel
memory, and that the DMAP region is non-executable.
Reviewed by: alc, kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32081
We don't need to assert we have Giant here. All machines that require
the F00F workaround are UP and interrupts are disabled. Since we are
single threaded, it's safe to allocate the IDT area with pmap_trm_alloc,
interact with the current idt table and replace the IDT table without
any Giant locking.
Sponsored by: Netflix
Reviewed by: kib, markj
Differential Revision: https://reviews.freebsd.org/D31839
Create a man page per loader. Loader(8) will have information common to
all of them, while loader_${INTERP}(8) will have information relevant to
that specific loader. Rewrite loader(8) to give an overview and point to
the appropriate man page. Rewrite each of the loader_${INTER}(8) man
pages to contain only the relevant information to that loader. Put all
the common commands, environment variables, etc in loader_simp(8) and
refernce that from the loader_lua or loader_4th man pages. The
loader_lua(8) could use more details about the Lua
integration. Additional organization may be benefitial.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D31340
Add support for ACPI device probing for SDHCI controller found on Marvell chips.
Reviewed by: mw
Sponsored by: Semihalf
Differential revision: https://reviews.freebsd.org/D31600
This patch splits driver code into two seperate files sdhci_xenon.c
and sdhci_xenon_fdt.c. This will allow future implementation of ACPI
discovery of sdhci on Xenon chips.
Reviewed by: mw
Sponsored by: Semihalf
Differential revision: https://reviews.freebsd.org/D31599
The debug register dump routine is not hooked up and is really only
useful to driver developers, so put it under an mgb-specific MGB_DEBUG
rather than general DEBUG.
MFC after: 1 week
Fixes: 8890ab7758 ("Introduce if_mgb driver...")
Sponsored by: The FreeBSD Foundation
Add a missing "static" for non-{i386,amd64,arm64} which was missed in
c39eefe715. This should ifx the builds.
Sponsored by: The FreeBSD Foundation
MFC after: 7 days
X-MFC with: c39eefe715
Use atomic counters to ensure that we correctly track the number of half
open states and syncookie responses in-flight.
This determines if we activate or deactivate syncookies in adaptive
mode.
MFC after: 1 week
Sponsored by: Modirum MDPay
Differential Revision: https://reviews.freebsd.org/D32134
The refactoring in 8a8166e5bc introduced a functional change that
breaks booting on the Stratix 10, hanging when it should be attaching
da0. Previously OF_getencprop was called with a pointer to host->f_max,
so if it wasn't present then the existing value was left untouched, but
after that commit it will instead clobber the value with 0. The dwmmc
driver, as used on the Stratix 10, sets a default value before calling
mmc_fdt_parse and so was broken by this functional change. It appears
that aw_mmc also does the same thing, so was presumably also broken on
some boards.
Fixes: 8a8166e5bc ("mmc: switch mmc_helper to device_ api")
Reviewed by: manu, mw
Differential Revision: https://reviews.freebsd.org/D32209
Coherent is lower 32bit only by default in Linux and our only default
dma mask is 64bit currently which violates expectations unless
dma_set_coherent_mask() was called explicitly with a different mask.
Implement coherent by creating a second tag, and storing the tags in the
objects and use the tag from the object wherever possible.
This currently does not update the scatterlist or pool (both could be
converted but S/G cannot be MFCed as easily).
There is a 2nd change embedded in the updated logic of
linux_dma_alloc_coherent() to always zero the allocation as
otherwise some drivers get cranky on uninialised garbage.
Sponsored by: The FreeBSD Foundation
MFC after: 7 days
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D32164
mvneta_find_ethernet_prop_switch() is file-local static to
if_mvneta_fdt.c. Normally we would not need a function declararion
but in case MVNETA_DEBUG is set it becomes public. Move the
function declaration from if_mvneta.c to if_mvneta_fdt.c to avoid
a warning during each compile.
Make sure the completion ID is in the range of [0..num_trackers) since
the values past the end of the act_tr array are never going to be valid
trackers and will lead to pain and suffering if we try to dereference
them to get the tracker or to set the tracker back to NULL as we
complete the I/O.
Sponsored by: Netflix
Reviewed by: mav, chs, chuck
Differential Revision: https://reviews.freebsd.org/D32088
Count the number of times we're asked to process completions, but that
we ignore because the state of the qpair isn't in RECOVERY_NONE.
Sponsored by: Netflix
Reviewed by: mav, chuck
Differential Revision: https://reviews.freebsd.org/D32212
The proper phase for the qpiar right after reset in the first interrupt
is 1. For it, make sure that we're not still in phase 0. This is an
illegal state to be processing interrupts and indicates that we've
failed to properly protect against a race between initializing our state
and processing interrupts. Modify stat resetting code so it resets the
number of interrpts to 1 instead of 0 so we don't trigger a false
positive panic.
Sponsored by: Netflix
Reviewed by: cperciva, mav (prior version)
Differential Revision: https://reviews.freebsd.org/D32211
An interrupt happens on the admin queue right away after the reset, so
as soon as we enable interrupts, we'll get a call to our interrupt
handler. It is safe to ignore this interrupt if we're not yet
initialized, or to process it if we are. If we are initialized, we'll
see there's no completion records and return. If we're not, we'll
process no completion records and return. Either way, nothing is
processed and nothing is lost.
Until we've completely setup the qpair, we need to avoid processing
completion records. Start the qpair in the waiting recovery state so we
return immediately when we try to process completions. The code already
sets it to 'NONE' when we're initialization is complete. It's safe to
defer completion processing here because we don't send any commands
before the initialization of the software state of the qpair is
complete. And even if we were to somehow send a command prior to that
completing, the completion record for that command would be processed
when we send commands to the admin qpair after we've setup the software
state. There's no good central point to add an assert for this last
condition.
This fixes an KASSERT "received completion for unknown cmd" panic on
boot.
Fixes: 502dc84a8b
Sponsored by: Netflix
Reviewed by: mav, cperciva, gallatin
Differential Revision: https://reviews.freebsd.org/D32210
It supports the following Microchip devices:
LAN7430 PCIe Gigabit Ethernet controller with PHY
LAN7431 PCIe Gigabit Ethernet controller with RGMII interface
The driver has a number of caveats and limitations, but is functional.
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Booting FreeBSD on an EC2 c5.xlarge instance, the loader "twiddles"
810 times over the course of 510 ms, a rate of 1.59 kHz. Even accepting
that many systems are slower than this particular VM and will take
longer to boot (especially if using spinning-rust disks), this seems
like an unhelpfully large amount of twiddling when compared to the
~60 Hz frame rate of many displays; printing the twiddles also consumes
roughly 10% of the boot time on the aforementioned VM.
Setting the default globaldiv to 16 dramatically reduces the time spent
printing twiddles to the console while still twiddling at roughly 100
Hz; this should be ample even for systems which take longer to boot and
consequently twiddle slower.
Note that this can adjusted via the twiddle_divisor variable in
loader.conf, but that file is not processed until nearly halfway
through the loader's runtime.
Reviewed by: allanjude, jrtc27, kevans
MFC after: 1 week
Sponsored by: https://www.patreon.com/cperciva
Differential Revision: <https://reviews.freebsd.org/D32163>
Be explicit that the driver has caveats and limitations, and remove the
note about not being connected to the build: I plan to connect it soon.
(Also the note serves no real purpose in a man page that is not
installed.)
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
When a usb device is detached, usb_pc_dmamap_destroy() called
bus_dmamap_destroy() while the map was still loaded. That's harmless on x86
architectures, but on all other platforms it causes bus_dmamap_destroy() to
return EBUSY and leak away any memory resources (including bounce buffers)
associated with the mapping, as well as any allocated map structure itself.
This change introduces a new is_loaded flag to the usb_page_cache struct to
track whether a map is loaded or not. If the map is loaded,
bus_dmamap_unload() is called before bus_dmamap_destroy() to avoid leaking
away resources.
MFC after: 7 days
Differential Revision: https://reviews.freebsd.org/D32208
When we get low on memory, the VM system tries to free some by swapping
pages. However, if we are so low on free pages that GELI allocations block,
then the swapout operation cannot complete. This keeps the VM system from
being able to free enough memory so the allocation can complete.
To alleviate this, keep a UMA pool at the GELI layer which is used for data
buffer allocation in the fast path, and reserve some of that memory for swap
operations. If an IO operation is a swap, then use the reserved memory. If
the allocation still fails, return ENOMEM instead of blocking.
For non-swap allocations, change the default to using M_NOWAIT. In general,
this *should* be better, since it gives upper layers a signal of the memory
pressure and a chance to manage their failure strategy appropriately. However,
a user can set the kern.geom.eli.blocking_malloc sysctl/tunable to restore
the previous M_WAITOK strategy.
Submitted by: jtl
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D24400
GEOM_ELI needs to know the value, cause it will soon have special
memory handling for IO operations associated with swap.
Move initialization to swap_pager_init(), which is executed at
SI_SUB_VM, unlike swap_pager_swap_init(), which would be executed
only when a swap is configured. GEOM_ELI might need the value at
SI_SUB_DRIVERS, when disks are tasted by GEOM.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D24400
If anything goes wrong during attach() it is handled with a 'goto fail'
which calls sysctl_ctx_free(). But the sysctl context doesn't get
initialized until very late in attach(), so almost any error just results
in a segfault. Move the sysctl_ctx_init() call to the beginning of the
attach() function, so that it is done before any errors can happen that
will lead to freeing the context.
This test case uses `dtrace -c` but it has some issues at the moment
While here, add a checker for dtrace executes successfully or not to provide
a more informative error message.
PR: 258763
Sponsored by: The FreeBSD Foundation
There's not much we can do if mii_mediachg() fails, but KASSERT is not
appropriate.
MFC after: 1 week
Fixes: 8890ab7758 ("Introduce if_mgb driver...")
Sponsored by: The FreeBSD Foundation
Receive Filtering Engine (RFE) configuration is not yet implemented,
and mgb intended to enable all broadcast, multicast, and unicast.
However, MGB_RFE_ALLOW_MULTICAST was missed (MGB_RFE_ALLOW_UNICAST was
included twice).
MFC after: 1 week
Fixes: 8890ab7758 ("Introduce if_mgb driver...")
Sponsored by: The FreeBSD Foundation
This function was renamed to kern_reboot() in 2010, but the man page has
failed to keep in sync. Bring it up to date on the rename, add the
shutdown hooks to the synopsis, and document the (obvious) fact that
kern_reboot() does not return.
Fix an outdated reference to the old name in kern_reboot(), and leave a
reference to the man page so future readers might find it before any
large changes.
Reviewed by: imp, markj
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32085
