Commit Graph

46 Commits

Author SHA1 Message Date
Gleb Smirnoff
d9d7ab852c Connect uep.ko to build
PR:		kern/155044
Submitted by:	Carl <k0802647 telus.net>
MFC after:	1 week
2011-02-26 17:22:11 +00:00
Hans Petter Selasky
b2dce55fe9 Add support for new USB to ethernet controller:
Moschip MCS7730/MCS7830

Submitted by:	Rick van der Zwet <info@rickvanderzwet.nl>
Approved by:	thompsa (mentor)
2011-02-16 08:33:30 +00:00
Weongyo Jeong
18ec652552 Adds a USB packet filter feature to the stack that it could capture
packets which go through each USB host controllers.  Its implementations
are almost based on BPF code and very similar with it except it's
little bit customized for USB packet only.  The userland program
usbdump(8) would be committed soon.

Discussed with:	hps, thompsa, yongari
2010-11-22 01:11:28 +00:00
Hans Petter Selasky
d751769d2c USB Network:
- Add new driver for iPhone tethering
- Supports the iPhone 3G/3GS/4G ethernet protocol

Approved by:    thompsa (mentor)
2010-10-13 21:36:42 +00:00
Hans Petter Selasky
0acf6a648a Link the XHCI (USB 3.0 hardware driver) into the default kernel build.
Approved by:    thompsa (mentor)
2010-10-04 23:22:03 +00:00
Warner Losh
c09808d0d6 MFtbemd:
Use MACHINE_CPUARCH in preference to MACHINE_ARCH.  The former is the
source code location of the machine, the latter the binary output.  In
general, we want to use MACHINE_CPUARCH instead of MACHINE_ARCH unless
we're tesitng for a specific target.  The isn't even moot for
i386/amd64 where there's momemntum towards a MACHINE_CPUARCH == x86,
although a specific cleanup for that likely would be needed...
2010-08-23 06:13:29 +00:00
Gleb Smirnoff
f25a8a0150 Add uep(4), driver for USB onscreen touch panel from eGalax.
The driver is stub. It just creates device entry and feeds
reassembled packets from hardware into it.

If in future we would port wsmouse(4) from NetBSD, or make
sysmouse(4) to support absolute motion events, then the driver
can be extended to act as system mouse. Meanwhile, it just
presents a /dev/uep0, that can be utilized by X driver, that
I am going to commit to ports tree soon.

The name for the driver is chosen to be the same as in NetBSD,
however, due to different USB stacks this driver isn't a port.
2010-05-25 21:20:56 +00:00
Andrew Thompson
8cfa1186ed usb_controller.c requires opt_ddb.h 2010-04-29 22:51:18 +00:00
Andrew Thompson
069f1a8056 Add run(4), a driver for Ralink RT2700U/RT2800U/RT3000U USB 802.11agn devices.
This driver was written for OpenBSD by Damien Bergamini and ported over by
Akinori Furukoshi.
2010-01-28 22:24:54 +00:00
Andrew Thompson
941e286383 Add a driver by Fredrik Lindberg for Option HSDPA USB devices. These differ
from standard 3G wireless units by supplying a raw IP/IPv6 endpoint rather than
using PPP over serial. uhsoctl(1) is used to initiate and close the WAN
connection.

Obtained from:	Fredrik Lindberg <fli@shapeshifter.se>
2010-01-13 03:16:31 +00:00
Rui Paulo
4d16b4ec42 Driver for the Apple Touchpad present on MacBook (non-Pro & Pro).
Submitted by:	Rohit Grover <rgrover1 at gmail.com>
MFC after:	2 months
2009-11-09 15:59:09 +00:00
Andrew Thompson
c3514114c6 Add opt_gdb.h which is now needed by ucom. 2009-10-19 21:54:41 +00:00
Andrew Thompson
b20adc2b5a Remove the newly added uch341 driver, it will be merged into uchcom instead.
Suggested by:	takawata
Submitted by:	HPS
2009-10-19 21:43:59 +00:00
Andrew Thompson
3bfbd845ff Add support for ChipHead 341 serial port adapter.
Submitted by:	Hans Petter Selasky
2009-09-28 07:32:11 +00:00
Weongyo Jeong
df99b9c9ac add two prerequisites; if_zydreg.h and if_zydfw for dependency check. 2009-06-04 03:59:20 +00:00
Weongyo Jeong
18b223fed4 connect urtw(4) to the amd64/i386 build that it's not tested on the big
endian machines yet.
2009-06-01 02:37:06 +00:00
Andrew Thompson
06079f1405 Hook ubt and ubtbcmfw back up to the build. 2009-05-27 16:43:40 +00:00
Weongyo Jeong
f58ca84122 ports urtw(4) for USB2. Additionally it supports a 8187B chipset weakly
that it needs more stabilization.
2009-05-27 03:57:38 +00:00
Weongyo Jeong
231a637720 connect upgt(4) to the build. It should work on all architectures. 2009-05-12 02:08:56 +00:00
Weongyo Jeong
879f0eff53 ports upgt(4) driver for USB2. 2009-05-11 02:39:49 +00:00
Weongyo Jeong
e4873cff7d connect uath(4) to the build. uath(4) should work on all architectures. 2009-04-06 12:43:40 +00:00
Andrew Thompson
6830af1a05 Remove usb_sw_transfer.[ch] which are now empty after r190735. 2009-04-06 00:32:54 +00:00
Weongyo Jeong
dc60165b73 Add uath(4) wireless USB driver for Atheros AR5005UG and AR5005UX
chipsets.

Reviewed by:	sam
2009-04-04 11:23:00 +00:00
Andrew Thompson
2b78d30630 Remove the uscanner(4) driver, this follows the removal of the kernel scanner
driver in Linux 2.6. uscanner was just a simple wrapper around a fifo and
contained no logic, the default interface is now libusb (supported by sane).

Reviewed by:	HPS
2009-03-19 20:33:26 +00:00
Andrew Thompson
7d0d268b8a Hook up new USB modules. 2009-02-23 18:32:59 +00:00
Andrew Thompson
3975e3a1ea Move usb to a graveyard location under sys/legacy/dev, it is intended that the
new USB2 stack will fully replace this for 8.0.

Remove kernel modules, a subsequent commit will update conf/files. Unhook
usbdevs from the build.
2009-02-23 18:16:17 +00:00
Nick Hibma
84150d7fee Obfuscated by other diffs while committing r183728:
Remove the files for the HCI interfaces from the usb module.
2008-10-09 20:00:17 +00:00
Warner Losh
a423fd2c55 opt_bus.h isn't needed here anymore. It never was really needed,
since usb has no business including it like it did...
2008-08-30 16:24:01 +00:00
Jens Schweikhardt
e201f9ecd1 Release n_hibma's maintainership due to his ENOTIME.
Discussed with, okayed, authorized, requested by, on behalf of:	n_hibma (MAINTAINER)
2005-06-04 10:58:39 +00:00
John Baldwin
8f11becb12 Add usbdevs_data.h to the SRCS list since usb_subr.c needs it. This forces
old usbdevs_data.h files to be updated as well as fixing the standalone
usb module build.
2004-12-31 16:05:07 +00:00
Warner Losh
a4aef7f9a4 We don't need to generate vnode_if.h anymore 2004-12-29 08:50:35 +00:00
Warner Losh
8edceb05bf Remove stray line with just a tab
Remove usbdevs_data.h, it isn't used by the module

Noticed by: Pawel Worach
2004-07-12 21:59:06 +00:00
Warner Losh
4c42b42a79 Add usbdevs.h and pccarddevs.h to the build list, as appropriate. This is needed to build as part of world or in src/sys/modules. 2004-06-27 12:33:20 +00:00
John-Mark Gurney
45dd937507 make usb bus_dma aware.
Reviewed by:	joe among others
2003-07-15 22:42:37 +00:00
Bernd Walter
ca3acad1d7 add EHCI (USB 2.0) controller support.
Approved by:	joe
		gallatin (mentor)
Obtained from:  NetBSD
2003-04-14 14:04:08 +00:00
Ruslan Ermilov
17d6c63672 Drop <bsd.man.mk> support from <bsd.kmod.mk>.
Not objected to by:	-current
2002-01-11 15:49:02 +00:00
David E. O'Brien
c68159a6d8 Use a consistent style and one much closer to the rest of /usr/src 2001-01-06 14:00:42 +00:00
Peter Wemm
64db83a8ab Use .include <bsd.kmod.mk> to get to ../../*/conf/kmod.mk instead of
encoding the relative path.
2000-05-27 01:14:33 +00:00
Peter Wemm
56ca39961b Pull in sys/conf/kmod.mk, rather than /usr/share/mk/bsd.kmod.mk.
This means that the kernel can be totally self contained now and is not
dependent on the last buildworld to update /usr/share/mk.  This might
also make it easier to build 5.x kernels on 4.0 boxes etc, assuming
gensetdefs and config(8) are updated.
2000-05-04 12:08:52 +00:00
Bruce Evans
9e4be63dd6 Add ${DEBUG_FLAGS} to CFLAGS in bsd.kmod.mk, not in scattered module
makefiles.  Bad examples in fxp/Makefile keep getting copied to new
makefiles.
2000-01-28 11:26:46 +00:00
Nick Hibma
0c4407576d Get rid of some debugging cruft. 2000-01-23 13:56:58 +00:00
Bill Paul
a0067d7b89 Attempt to fix a problem with receiving packets on USB ethernet interfaces.
Packets are received inside USB bulk transfer callbacks, which run at
splusb() (actually splbio()). The packet input queues are meant to be
manipulated at splimp(). However the locking apparently breaks down under
certain circumstances and the input queues can get trampled.

There's a similar problem with if_ppp, which is driven by hardware/tty
interrupts from the serial driver, but which must also manipulate the
packet input queues at splimp(). The fix there is to use a netisr, and
that's the fix I used here. (I can hear you groaning back there. Hush up.)

The usb_ethersubr module maintains a single queue of its own. When a
packet is received in the USB callback routine, it's placed on this
queue with usb_ether_input(). This routine also schedules a soft net
interrupt with schednetisr(). The ISR routine then runs later, at
splnet, outside of the USB callback/interrupt context, and passes the
packet to ether_input(), hopefully in a safe manner.

The reason this is implemented as a separate module is that there are
a limited number of NETISRs that we can use, and snarfing one up for
each driver that needs it is wasteful (there will be three once I get
the CATC driver done). It also reduces code duplication to a certain
small extent. Unfortunately, it also needs to be linked in with the
usb.ko module in order for the USB ethernet drivers to share it.

Also removed some uneeded includes from if_aue.c and if_kue.c

Fix suggested by: peter
Not rejected as a hairbrained idea by: n_hibma
2000-01-10 23:12:54 +00:00
Marcel Moolenaar
c292cf660e Remove -g compiler flag. 2000-01-03 12:01:30 +00:00
Bruce Evans
6f940b3847 Removed special rules for building and cleaning device interface files
and empty options files.  The rules are now generated automatically in
bsd.kmod.mk.  Cleaned up related things ($S and ${CLEANFILES}).
1999-11-28 18:53:47 +00:00
Brian Feldman
aad0fe3efa Make this compile (remove vnode_if.c from SRCS) and clean properly
(add opt_bus.h to CLEANFILES).
1999-11-22 06:36:25 +00:00
Nick Hibma
953dc38912 USB is loadable as a module as well. 1999-11-22 03:46:33 +00:00