to add PV list locking to pmap_pv_demote_pde(), it is necessary to change
the way that pmap_pv_demote_pde() allocates PV entries. Specifically,
once pmap_pv_demote_pde() begins modifying the PV lists, it can't allocate
any new PV chunks, because that could require the PV list lock to be
dropped. So, all necessary PV chunks must be allocated in advance. To my
surprise, this new approach is a few percent faster than the old one.
the scheduled task from tc_windup(). Do it directly from tc_windup in
interrupt context [1].
Establish the permanent mapping of the shared page into the kernel
address space, avoiding the potential need to sleep waiting for
allocation of sf buffer during vdso_timehands update. As a
consequence, shared_page_write_start() and shared_page_write_end()
functions are not needed anymore.
Guess and memorize the pointers to native host and compat32 sysentvec
during initialization, to avoid the need to get shared_page_alloc_sx
lock during the update.
In tc_fill_vdso_timehands(), do not loop waiting for timehands
generation to stabilize, since vdso_timehands is written in the same
interrupt context which wrote timehands.
Requested by: mav [1]
MFC after: 29 days
and CAM_LUN_INVALID for case of missing devices. In removes tons of error
messages from CAM during bus scans.
Reported and tested by: Mike Tancsa <mike@sentex.net>
MFC after: 3 days
defect information it has before grabbing the full defect list.
This works around a bug with some Hitachi drives that generate data overrun
errors when they are asked for more defect data than they have.
The change is done in a spec-compliant way, so it should have no negative
impact on drives that don't have this issue.
This is based on work originally done at Sandvine.
scsi_da.h: Add a define for the maximum amount of data that can be
contained in a defect list.
camcontrol.c: Update the readdefects() function to issue an initial
command to determine the length of the defect list, and
then use that length in the request for the full defect
list.
camcontrol.8: Add a note that some drives will report 0 defects available
if you don't request either the PLIST or GLIST.
Submitted by: Mark Johnston <markjdb@gmail.com> (original version)
MFC after: 3 days
by vm_objects.
- Add flags for the per-object lock and free pages queue mutex lock.
Use the newly added flags to mark the cache root within the vm_object
structure.
Please note that other vm_object members should be marked with correct
locking but they are left for other commits.
In collabouration with: alc
MFC after: 3 days3 days3 days
Our libedit has been diverging from the mainstream version
maintained in NetBSD. As a consequence it has been difficult
to do an appropriate MFV and we have been bringing only
partial updates.
Here we update most of the files to at least match the
version available in NetBSD's snapshot of 20091228. This
version was chosen because it still doesn't include wide
character support (UTF-8), which involves many changes and
new files.
From NetBSD's logs:
Dec 15 22:13:33 2006 - editline.3 el.c el.h histedit.h
add EL_GETFP, and EL_SETFP.
Apr 5 15:53:28 2008 - editline.3 el.c histedit.h readline.c
add EL_REFRESH for the benefit of readline
Sep 10 15:45:37 2008 - common.c el.c read.c refresh.c sig.c term.c term.h tty.c
Allow a single process to control multiple ttys (for pthreads using _REENTRANT)
using multiple EditLine objects.
Jan 18 12:17:24 2009 - el.c read.c readline.c
fix -Wsign-compare issues
Feb 6 14:40:32 2009 - history.c
Plug memory leak, from MySQL.
Feb 5 19:15:44 2009 - histedit.h read.c
match documentation in el_push
Feb 6 13:14:37 2009 - vi.c
Portability fix.
Feb 12 13:39:49 2009 - readline.c term.c
More fixes for existing portability stuff.
Feb 15 21:24:13 2009 - el.h read.c
don't restart on EINTR, instead return NULL immediately. From Anon Ymous
Feb 15 21:25:01 2009 - sig.c sig.h
in order for read() to return EINTR we need to use sigaction, not signal,
otherwise SA_RESTART is set.
Feb 15 21:55:23 2009 - chared.c chared.h common.c emacs.c filecomplete.c
filecomplete.h key.c key.h read.c readline.c refresh.c search.c
term.c tokenizer.c tty.c vi.c
pass lint on _LP64.
Feb 17 21:34:26 2009 - el.c histedit.h prompt.c prompt.h
allow for a prompt argument.
Feb 18 15:04:40 2009 - sig.c
SA_RESTART for all signals but SIGINT. From Anon Ymous.
Feb 19 15:20:22 2009 - read.c sig.c sig.h
reset and redraw on sigcont. From Anon Ymous.
Feb 21 23:31:56 2009 - key.c key.h readline.c vi.c
more size_t stuff.
Mar 10 20:46:15 2009 - editline.3 read.c
make el_gets set the count to -1 on error to distinguish between EOF and
error.
Mar 31 17:38:27 2009 - editline.3 el.c histedit.h prompt.c prompt.h
refresh.c term.c term.h
Implement literal prompt sequences. Now someone can implement
RL_PROMPT_START_LITERAL/RL_PROMPT_END_LITERAL :-)
Mar 31 21:33:17 2009 - term.c
cast to size_t to avoid sign / unsigned comparison warning.
Apr 23 02:03 2009 - term.c
Apply patch (requested by msaitoh in ticket #2007):
Coverity CID 1668: Plug memory leak when malloc() failed.:55 2009
May 11 18:33:30 2009 - editline.3 el.c histedit.h
restore binary compatibility by providing new prompt functions that take
an extra literal character.
May 19 21:45:14 2009 - refresh.c
always scroll when we advance past bottom. From Caleb Welton
cwelton at greenplum dot com.
Jul 17 12:27:57 2009 - term.c
- off by one in the term.h case.
- make code more similar to tcsh (if we want to handle wide chars, this is
needed; for now it is a no-op)
Jul 22 15:56:29 2009 - el.c
Move filename to the scope it is being used.
From Michael Cook mcook at bbn dot com
Jul 22 15:57:00 2009 - read.c
Always initialize nread since it is an out param.
From Michael Cook mcook at bbn dot com
Jul 22 18:25:26 2009 - el.c
Only need path if we have issetugid... From Anon Ymous
Jul 25 21:19:23 2009 - el.c
Ignore comment lines in .editrc from Jess Thrysoee
Sep 7 21:24:33 2009
histedit.h history.c readline.c
apply apple patches from:
http://opensource.apple.com/source/libedit/libedit-11/patches/
Dec 28 21:52:43 2009 - refresh.c
Fix bug where tab completion on the second or > line that caused listing
ended up corrupting the display by an extra space in the beginning. Reported
by Mac Chan.
Dec 28 22:15:36 2009 - refresh.c term.c
reduce diff with tcsh
Obtained from: NetBSD
Tested by: bapt, jilles and current@
MFC after: 1 week
trampoline addresses after the shared page is enabled. Handle FreeBSD
ABIs without shared page support too.
Reported and tested by: David Wolfskill <david catwhisker org>
(previous version)
Pointy hat to: kib
MFC after: 1 month
clock_gettime(2) functions if supported. The speedup seen in
microbenchmarks is in range 4x-7x depending on the hardware.
Only amd64 and i386 architectures are supported. Libc uses rdtsc and
kernel data to calculate current time, if enabled by kernel.
Hopefully, this code is going to migrate into vdso in some future.
Discussed with: bde
Reviewed by: jhb
Tested by: flo
MFC after: 1 month
usermode, using shared page. The structures and functions have vdso
prefix, to indicate the intended location of the code in some future.
The versioned per-algorithm data is exported in the format of struct
vdso_timehands, which mostly repeats the content of in-kernel struct
timehands. Usermode reading of the structure can be lockless.
Compatibility export for 32bit processes on 64bit host is also
provided. Kernel also provides usermode with indication about
currently used timecounter, so that libc can fall back to syscall if
configured timecounter is unknown to usermode code.
The shared data updates are initiated both from the tc_windup(), where
a fast task is queued to do the update, and from sysctl handlers which
change timecounter. A manual override switch
kern.timecounter.fast_gettime allows to turn off the mechanism.
Only x86 architectures export the real algorithm data, and there, only
for tsc timecounter. HPET counters page could be exported as well, but
I prefer to not further glue the kernel and libc ABI there until
proper vdso-based solution is developed.
Minimal stubs neccessary for non-x86 architectures to still compile
are provided.
Discussed with: bde
Reviewed by: jhb
Tested by: flo
MFC after: 1 month
Do not rely on the busy state of the page from which we allocate the
chunk, to protect allocator state. Use statically allocated sx lock
instead.
Provide more flexible KPI. In particular, allow to allocate chunk
without providing initial data, and allow writes into existing
allocation. Allow to get an sf buf which temporary maps the chunk, to
allow sequential updates to shared page content without unmapping in
between.
Reviewed by: jhb
Tested by: flo
MFC after: 1 month
(x86 assembler optimization disabled for now because it
requires the new .cfi_* directives that is not supported
by base system binutils).
MFC after: 1 week
from GCC in the base system. Note this patch was submitted upstream and it
will appear in the next ACPICA release.
Discussed with: Moore, Robert (robert dot moore at intel dot com)
The GCC4.3 branch contains some optimization fixes
that were not considered regressions and therefore
were never backported. We are bringing a couple of
them that are under GPLv2 since they were made
before the license switch upstream.
While here, add the GCC revision numbers in the
log.
Discussed with: jkim
MFC after: 1 week
no longer necessary for free_pv_entry() to be serialized by the pvh global
lock.
Retire pmap_insert_entry() and pmap_remove_entry(). Once upon a time,
these functions were called from multiple places within the pmap. Now,
each has only one caller.
done queue. Clearing it before caused extra SIM queueing in some cases.
It was invisible during normal operation, but during USB device unplug and
respective SIM destruction it could keep pointer on SIM without having
counted reference and as result crash the system by use afer free.
Reported by: hselasky
MFC after: 1 week
is performed before exact size of the buffer is calculated, but the
buffer cannot have size greater then the total space allocated for
extended attributes. The existing check is executing with precise
size, but it is too late, since buffer needs to be allocated in
advance.
Also, adapt to uio_resid being of ssize_t type. Use lblktosize instead of
multiplying by fs block size by hand as well.
Reported and tested by: pho
MFC after: 1 week
It seems that intended locking protocol for struct file f_offset field
was as follows: f_offset should always be changed under the vnode lock
(except fcntl(2) and lseek(2) did not followed the rules). Since
read(2) uses shared vnode lock, FOFFSET_LOCKED block is additionally
taken to serialize shared vnode lock owners.
This was broken first by enabling shared lock on writes, then by
fadvise changes, which moved f_offset assigned from under vnode lock,
and last by vn_io_fault() doing chunked i/o. More, due to uio_offset
not yet valid in vn_io_fault(), the range lock for reads was taken on
the wrong region.
Change the locking for f_offset to always use FOFFSET_LOCKED block,
which is placed before rangelocks in the lock order.
Extract foffset_lock() and foffset_unlock() functions which implements
FOFFSET_LOCKED lock, and consistently lock f_offset with it in the
vn_io_fault() both for reads and writes, even if MNTK_NO_IOPF flag is
not set for the vnode mount. Indicate that f_offset is already valid
for vn_read() and vn_write() calls from vn_io_fault() with FOF_OFFSET
flag, and assert that all callers of vn_read() and vn_write() follow
this protocol.
Extract get_advice() function to calculate the POSIX_FADV_XXX value
for the i/o region, and use it were appropriate.
Reviewed by: jhb
Tested by: pho
MFC after: 2 weeks
is not correct. The code works by accident because gzFile is
currently defined as void *, and internally it would be casted from
or to its real type.
A newer version of zlib will instead define it as a pointer to a
specific type pointer (namely, struct gzFile_s *). This therefore
would cause stricter checks and compiler would catch this type
mismatch.
This change does not cause any changes to the resulting binary,
as validated with md5(1).
MFC after: 3 days