Commit Graph

38102 Commits

Author SHA1 Message Date
Julian Elischer
f7831602d5 Compaq "Intelligent Disk Array" driver.
Mark Dawson holds teh copyright on this and has releases from
Compaq to allow him to do so..

Not functional in 4.0 yet but being checked in to allow the functional
3.x version to be branched at this point.
1999-05-25 19:45:17 +00:00
Dmitrij Tejblum
eee8a8e4e0 From our i386 counterpart:
|revision 1.13
|date: 1995/09/15 23:49:23;  author: davidg;  state: Exp;  lines: +15 -2
|Check for page being resident when doing I/O with /dev/kmem and return
|EFAULT if it is not resident. This prevents the system from manufacturing
|a zero-fill page for unused but allocated areas of the kernel's VM.
1999-05-25 19:32:53 +00:00
Tim Vanderhoek
00214ba3c4 Spell vp0 correctly. Add id.
PR:		docs/10500 (Masaru Tsunoda [3]masaru@pokemon.to)
1999-05-25 17:34:07 +00:00
Kenneth D. Merry
edd24ab742 Fix the read/write permission checks in cam_periph_mapmem(). If we're
writing, we want to be able to read the buffer.  If we're reading, we want
to be able to write to the buffer.

PR:		kern/11870
Submitted by:	Andrew Mobbs <amobbs@allstor-sw.co.uk>
1999-05-25 17:10:04 +00:00
Roger Hardiman
ceed656248 Add OPTi 82c822 host to PCI bridge
This is an old OPTi chipset.
If you use a Bt878 card with this chipset, be sure to enable
the SIS/VIA chipset compatiblity mode workaround.

Tested By: Ben Laurie <ben@algroup.co.uk>
1999-05-25 15:56:10 +00:00
Tim Vanderhoek
168de44296 Handle ".if ${T} > 1 || ${T} < 3" and friends correctly.
Reported-by:	asami
1999-05-25 13:45:08 +00:00
Roger Hardiman
8fa3a2e7ed Rename 849 to 849A (the correct name for the IC) 1999-05-25 12:44:40 +00:00
Roger Hardiman
ec3a598be7 Add support for the Bt878/Bt879's Intel 430 FX and
SIS/VIA/ OPTi chipset PCI bus workarounds.

These make the Bt878/879 chips stabler on certain
older and non-intel motherboards.

Use options BKTR_430_FX_MODE
or  options BKTR_SIS_VIA_MODE
to enable these modes.

Also rename 849 to 849A
1999-05-25 12:43:40 +00:00
Pierre Beyssac
8f823235a9 Typo.
PR:		docs/11832
Submitted by:	Ralf S. Engelschall <rse@engelschall.com>
1999-05-25 11:52:30 +00:00
Peter Wemm
7c8dec7b63 Add a -i localname switch (restricted to root) to specify a different
local "login" name for rcmd(3).  This is particularly useful for things
like portslave and other packages with terminal server functionality
where a login can either run ppp locally or get shunted off to another
box via rlogin depending on radius authentication etc.  Quite often the
local box doesn't even have accounts, so a flag such as this is needed.
Obviously this is restricted to callers with uid == 0.
1999-05-25 11:14:33 +00:00
KATO Takenori
128cd97530 Merge with sys/i386/isa/wd.c revision 1.192 and 1.193.
Submitted by:	Takahashi Yoshihiro <nyan@wyvern.cc.kogakuin.ac.jp>
1999-05-25 10:41:14 +00:00
KATO Takenori
fb84c9994c Sync with sys/i386/i386/userconfig.c revision 1.145. 1999-05-25 10:32:10 +00:00
KATO Takenori
607f92b4bd Sync with sys/i386/conf/options.i386 revision 1.114. 1999-05-25 10:30:58 +00:00
Brian Somers
63e13c80ea Back the last change out.
It upsets the calculations in sys.c (switch(maj)).
1999-05-25 10:30:52 +00:00
Brian Somers
cd956c3bc1 Allow booting from "ad"
Reviewed by: Søren
1999-05-25 09:32:00 +00:00
John Polstra
ed0c12b595 Remove references to the obsolete src-eBones collection.
PR:		conf/11873
1999-05-25 05:38:27 +00:00
Tim Vanderhoek
e87212489a Update for post 3.2R since this'll be quickly forgotten otherwise.
Say, isn't about time for a -SNAP release?
1999-05-24 23:52:46 +00:00
Tim Vanderhoek
15e406d3ee MF3S: typo 1999-05-24 23:44:57 +00:00
Tim Vanderhoek
6cc2d0051d Typos (one reported in misc/11876 by Andrew Boothman <andrew@cream.org>) 1999-05-24 23:32:00 +00:00
Wes Peters
b7edcd43b5 Added Posix rand_r function. 1999-05-24 23:30:14 +00:00
Robert Nordier
c9091105f3 Activate mbr. 1999-05-24 22:44:32 +00:00
Robert Nordier
9292eec80d Add mbr: a standard master boot record intended to replace a couple
that are presently embedded in the fdisk and sysinstall code.
1999-05-24 22:36:24 +00:00
Doug Rabson
1522abdd5e Don't try to allocate memory resource unless address is non-zero. 1999-05-24 18:50:41 +00:00
Hellmuth Michaelis
3172992e9d Fix i4bteld entry, the section of the sh case for "i4teld*)" should be
BEFORE the case for "i4tel*)". (match the longest prefix first!)
Recognized by: Harry Starr
1999-05-24 18:01:03 +00:00
Roger Hardiman
6d30ce34c5 Update PicoBSD kernel config files. Changes are
removal of bio, tty, net
  removal of quotes
  switches from isa? to nexus? or atkbdc?
  additional comments

  These bring the kernel config files in sync with those in
  RELENG_3
1999-05-24 17:27:30 +00:00
Brian Somers
acbd1f00fd Correct the ``ignoring sync/async'' warnings so that they show
up with the correct device type.
Reassign the correct tcpdevice or execdevice after transfering
a link in MP server mode.
1999-05-24 16:39:17 +00:00
Bill Paul
497760a16a Fix bug that can cause transmit corruption. There are actually two 'rings'
in the transmit code: the TX descriptor ring, and a 'shadow' ring of mbuf
pointers, one for each TX descriptor. When transmitting a packet that
consists of several fragments in an mbuf chain, we link each fragment
to a descriptor in the TX ring, but we only save a pointer to the mbuf
chain. This pointer is saved in the shadow ring entry which corresponds
to the first fragment in the packet. Later, ti_txeof() can release the
whole chain with a single m_freem() call. (We need the second ring to
keep track of the virtual addresses of the mbuf chains.)

The problem with this is that the Tigon isn't actually through with the
mbuf chain until it reaches the last fragment (which has the TI_BDFLAG_END
bit set), however the current scheme releases the mbuf chain as soon as
the first fragment is consumed. This is wrong, since the mbufs can then
be yanked out from under the Tigon and modified before the other fragments
can be transmitted.

The fix is to make a one line change to ti_encap() so that it saves the
mbuf chain pointer in the shadow ring entry that corresponds to the last
fragment in TX ring instead of the first. This prevents the mbufs from
being released until the last fragment is transmitted.

Painstakingly diagnosed and fixed by: Robert Picco <picco@mail.wevinc.com>
Brought to my attention by: dg
1999-05-24 14:56:55 +00:00
Luigi Rizzo
e142fadecb close pr 10889:
+ add a missing call to dn_rule_delete() when flushing firewall
  rules, thus preventing possible panics due to dangling pointers
  (this was already done for single rule deletes).
+ improve "usage" output in ipfw(8)
+ add a few checks to ipfw pipe parameters and make it a bit more
  tolerant of common mistakes (such as specifying kbit instead of Kbit)

PR: kern/10889
Submitted by: Ruslan Ermilov
1999-05-24 10:01:22 +00:00
Brian Somers
26e64ed9d4 Don't warn about ``!'' lines being unindented commands in ppp.conf. 1999-05-24 09:04:35 +00:00
John Birrell
994d9b67a5 Added a missing comma to the static condition variable initialisation
definition.

Submitted by: David Leonard <David.Leonard@csee.uq.edu.au>, an OpenBSD guy.
1999-05-24 07:22:55 +00:00
Peter Wemm
578de0426e Fix a [start,end] vs [start,count] botch that corrupted the resource
manager and prevented IOPort allocation beyond the first EISA slot from
working.  subr_rman.c should have trapped this on the way into the system
rather than tripping over the wreckage.

Head banged into wall repeatedly by:  "Matthew N. Dodd" <winter@jurai.net>
1999-05-24 03:08:46 +00:00
John Birrell
5095f1917a Remove the static declaration from the line[] variable to allow
openpty() to be called from a threaded application.
1999-05-24 01:15:28 +00:00
John Birrell
8fb7da0099 Remove the mfs stuff now that mfs_init() does the MFS_ROOT initialisation. 1999-05-24 00:54:17 +00:00
John Birrell
350185153d Back out my previous change (phk didn't like it) in favour of setting
rootdev in the mfs initialisation code iff MFS_ROOT (which Bruce doesn't
like). Damned if I do - damned if I don't.
1999-05-24 00:37:26 +00:00
Jean-Marc Zucconi
8878be20f8 Fix typo in dump reporting
PR:		bin/10573
Submitted by:	Christian Weisgerber <naddy@mips.rhein-neckar.de>
1999-05-24 00:35:47 +00:00
John Birrell
02013ff886 Remove the test for bdevsw(dev) == NULL from bdevvp() because it fails
if there is no character device associated with the block device. In this
case that doesn't matter because bdevvp() doesn't use the character
device structure.

I can use the pointy bit of the axe too.
1999-05-24 00:34:10 +00:00
John Birrell
4d562a18fc - Make setroot() conditional on FFS etc, to avoid a compiler warning
on systems with no FFS.
- Remove all references to mfs from cpu_rootconf(). mfs_init is
  called prior to cpu_rootconf(), so it can set mountrootfsname to mfs
  and (more imporantly) set rootdev using the (bogus in Bruce's opinion)
  special major number of 255.
1999-05-24 00:30:49 +00:00
John Birrell
ed3a2fb7b3 - Back out Luoqi's cdevsw stuff. It panics on my system and is not required.
- Fix an error message.
- Do the MFS_ROOT setting of mountrootfsname in mfs_init() instead of
  cpu_rootconf().
- Set rootdev in mfs_init instead of later in mfs_mount() iff MFS_ROOT.
1999-05-24 00:27:12 +00:00
Warner Losh
b790f1b6de getopt(3) returns -1 not EOF. 1999-05-23 23:24:26 +00:00
Warner Losh
c8b4bd56c2 Getopt(3) returns -1 not EOF. 1999-05-23 23:18:38 +00:00
Warner Losh
0e49c54852 Getopt(3) returns -1, not EOF. 1999-05-23 23:17:28 +00:00
Roger Hardiman
ab27fe4452 Added rgb_vbi_prog() to capture VBI data and video at the
same time. To capture VBI data, /dev/vbi must be opened
before starting video capture.
A partly on code from Hiroki Mori <mori@infocity.co.jp>
1999-05-23 21:40:51 +00:00
Brian Somers
3da2229c1c Use RELENG_3 as an example, not RELENG_2_2. 1999-05-23 20:01:20 +00:00
Justin T. Gibbs
8281556234 Rely on the statistics in XPT_GDEV_STATS instead of the versions still
retained in XPT_GDEV_TYPE for binary compatibility.  Mark the legacy
structure values for removal when we bump the major CAM revision.
1999-05-23 18:57:29 +00:00
Justin T. Gibbs
3caf668db7 Don't reference our SCB until we have validated that the firmware has
returned an SCB that is in range.
1999-05-23 18:55:58 +00:00
Justin T. Gibbs
cf7d3071b9 Poll for interrupts in bt_cmd in case they are masked. A completing
mailbox command will block the completion of an immediate command,
so we must service them for our command to succeed.

PR: 11799
1999-05-23 18:54:34 +00:00
David E. O'Brien
c2fc637349 Get case right in "COMPAT3X".
Submitted by:	Kevin Street <street@iname.com>
1999-05-23 17:57:23 +00:00
Jean-Marc Zucconi
ef9866be68 xargs was spliting the input in a very different way from everyone else,
and was also a bit inconsistent: leading blanks, or any double blanks
generated empty arguments, but a trailing blank did not.

PR:		bin/2630, bin/10914
Submitted by:	Arne Henrik Juul <arnej@imf.unit.no>
1999-05-23 15:58:22 +00:00
Brian Somers
6961f3da13 brucify
Mentioned by: sprice@hiwaay.net
1999-05-23 13:52:05 +00:00
Doug Rabson
485de8b5d2 Use the correct width integer on both i386 and alpha.
Reviewed by: Steve Price <sprice@hiwaay.net>
1999-05-23 13:43:04 +00:00