The lock was temporarily dropped for vrele calls, but they can be
postponed to a point where the lock is not held in the first place.
While here shuffle other code not needing the lock.
This was previously set after the hook and only if auxargs were present.
Now always provide it if possible.
MFC after: 2 weeks
Reviewed by: kib
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D6546
This allows an EVENTHANDLER(process_exec) hook to see if the new image
will cause credentials to change whether due to setgid/setuid or because
of POSIX saved-id semantics.
This adds 3 new fields into image_params:
struct ucred *newcred Non-null if the credentials will change.
bool credential_setid True if the new image is setuid or setgid.
This will pre-determine the new credentials before invoking the image
activators, where the process_exec hook is called. The new credentials
will be installed into the process in the same place as before, after
image activators are done handling the image.
MFC after: 2 weeks
Reviewed by: kib
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D6544
Use the C99 'static' keyword to hint to the compiler IVs and output digest
sizes. The keyword informs the compiler of the minimum valid size for a given
array. Obviously not every pointer can be validated (i.e., the compiler can
produce false negative but not false positive reports).
No functional change. No ABI change.
Sponsored by: EMC / Isilon Storage Division
Because the size of bool can be implementation defined, make a bool
sysctl handler which handle bools. Userspace sees the bools like
unsigned 8-bit integers. Values are filtered to either 1 or 0 upon
read and write, similar to what a compiler would do.
Requested by: kmacy @
Sponsored by: Mellanox Technologies
have ACLE support built in. The ACLE (ARM C Language Extensions) defines
a set of standardized symbols which indicate the architecture version and
features available. ACLE support is built in to modern compilers (both
clang and gcc), but absent from gcc prior to 4.4.
ARM (the company) provides the acle-compat.h header file to define the
right symbols for older versions of gcc. Basically, acle-compat.h does
for arm about the same thing cdefs.h does for freebsd: defines
standardized macros that work no matter which compiler you use. If ARM
hadn't provided this file we would have ended up with a big #ifdef __arm__
section in cdefs.h with our own compatibility shims.
Remove #include <machine/acle-compat.h> from the zillion other places (an
ever-growing list) that it appears. Since style(9) requires sys/types.h
or sys/param.h early in the include list, and both of those lead to
including cdefs.h, only a couple special cases still need to include
acle-compat.h directly.
Loves it: imp
After the previous changes to fix requests on blocking sockets to complete
across multiple operations, an edge case exists where a request can be
cancelled after it has partially completed. POSIX doesn't appear to
dictate exactly how to handle this case, but in general I feel that
aio_cancel() should arrange to cancel any request it can, but that any
partially completed requests should return a partial completion rather
than ECANCELED. To that end, fix the socket AIO cancellation routine to
return a short read/write if a partially completed request is cancelled
rather than ECANCELED.
Sponsored by: Chelsio Communications
We may enable interrupts from within the callback, e.g. in a data abort
during copyin. If we receive an interrupt at that time pmc_hook will be
called again and, as it is handling userspace stack tracing, will hit a
KASSERT as it checks if the trapframe is from userland.
With this I can run hwpmc with intrng on a ThunderX and have it trace all
CPUs.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Always requeue an AIO job at the head of the socket buffer's queue if
sosend() or soreceive() returns EWOULDBLOCK on a blocking socket.
Previously, requests were only requeued if they returned EWOULDBLOCK
and completed no data. Now after a partial completion on a blocking
socket the request is queued and the remaining request is retried when
the socket is ready. This allows writes larger than the currently
available space on a blocking socket to fully complete. Reads on a
blocking socket that satifsy the low watermark can still return a short
read (same as read()).
In order to track previously completed data, the internal 'status'
field of the AIO job is used to store the amount of previously
computed data.
Non-blocking sockets continue to return short completions for both
reads and writes.
Add a test for a "large" AIO write on a blocking socket that writes
twice the socket buffer size to a UNIX domain socket.
Sponsored by: Chelsio Communications
Add a bit_count function, which efficiently counts the number of bits set in
a bitstring.
sys/sys/bitstring.h
tests/sys/sys/bitstring_test.c
share/man/man3/bitstring.3
Add bit_alloc
sys/kern/subr_unit.c
Use bit_count instead of a naive counting loop in check_unrhdr, used
when INVARIANTS are enabled. The userland test runs about 6x faster
in a generic build, or 8.5x faster when built for Nehalem, which has
the POPCNT instruction.
sys/sys/param.h
Bump __FreeBSD_version due to the addition of bit_alloc
UPDATING
Add a note about the ABI incompatibility of the bitstring(3)
changes, as suggested by lidl.
Suggested by: gibbs
Reviewed by: gibbs, ngie
MFC after: 9 days
X-MFC-With: 299090, 300538
Relnotes: yes
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D6255
pause_sbt(). This allows pause() to continue working during a panic()
which is not invoking KDB. This is useful when debugging graphics
drivers using the LinuxKPI.
Obtained from: kmacy @
MFC after: 1 week
sglist_count_vmpages() determines the number of segments required for
a buffer described by an array of VM pages. sglist_append_vmpages()
adds the segments described by such a buffer to an sglist. The latter
function is largely pulled from sglist_append_bio(), and
sglist_append_bio() now uses sglist_append_vmpages().
Reviewed by: kib
Sponsored by: Chelsio Communications
Add a pair of bus methods that can be used to "map" resources for direct
CPU access using bus_space(9). bus_map_resource() creates a mapping and
bus_unmap_resource() releases a previously created mapping. Mappings are
described by 'struct resource_map' object. Pointers to these objects can
be passed as the first argument to the bus_space wrapper API used for bus
resources.
Drivers that wish to map all of a resource using default settings
(for example, using uncacheable memory attributes) do not need to change.
However, drivers that wish to use non-default settings can now do so
without jumping through hoops.
First, an RF_UNMAPPED flag is added to request that a resource is not
implicitly mapped with the default settings when it is activated. This
permits other activation steps (such as enabling I/O or memory decoding
in a device's PCI command register) to be taken without creating a
mapping. Right now the AGP drivers don't set RF_ACTIVE to avoid using
up a large amount of KVA to map the AGP aperture on 32-bit platforms.
Once RF_UNMAPPED is supported on all platforms that support AGP this
can be changed to using RF_UNMAPPED with RF_ACTIVE instead.
Second, bus_map_resource accepts an optional structure that defines
additional settings for a given mapping.
For example, a driver can now request to map only a subset of a resource
instead of the entire range. The AGP driver could also use this to only
map the first page of the aperture (IIRC, it calls pmap_mapdev() directly
to map the first page currently). I will also eventually change the
PCI-PCI bridge driver to request mappings of the subset of the I/O window
resource on its parent side to create mappings for child devices rather
than passing child resources directly up to nexus to be mapped. This
also permits bridges that do address translation to request suitable
mappings from a resource on the "upper" side of the bus when mapping
resources on the "lower" side of the bus.
Another attribute that can be specified is an alternate memory attribute
for memory-mapped resources. This can be used to request a
Write-Combining mapping of a PCI BAR in an MI fashion. (Currently the
drivers that do this call pmap_change_attr() directly for x86 only.)
Note that this commit only adds the MI framework. Each platform needs
to add support for handling RF_UNMAPPED and thew new
bus_map/unmap_resource methods. Generally speaking, any drivers that
are calling rman_set_bustag() and rman_set_bushandle() need to be
updated.
Discussed on: arch
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D5237
This change includes support for SCSI SMR drives (which conform to the
Zoned Block Commands or ZBC spec) and ATA SMR drives (which conform to
the Zoned ATA Command Set or ZAC spec) behind SAS expanders.
This includes full management support through the GEOM BIO interface, and
through a new userland utility, zonectl(8), and through camcontrol(8).
This is now ready for filesystems to use to detect and manage zoned drives.
(There is no work in progress that I know of to use this for ZFS or UFS, if
anyone is interested, let me know and I may have some suggestions.)
Also, improve ATA command passthrough and dispatch support, both via ATA
and ATA passthrough over SCSI.
Also, add support to camcontrol(8) for the ATA Extended Power Conditions
feature set. You can now manage ATA device power states, and set various
idle time thresholds for a drive to enter lower power states.
Note that this change cannot be MFCed in full, because it depends on
changes to the struct bio API that break compatilibity. In order to
avoid breaking the stable API, only changes that don't touch or depend on
the struct bio changes can be merged. For example, the camcontrol(8)
changes don't depend on the new bio API, but zonectl(8) and the probe
changes to the da(4) and ada(4) drivers do depend on it.
Also note that the SMR changes have not yet been tested with an actual
SCSI ZBC device, or a SCSI to ATA translation layer (SAT) that supports
ZBC to ZAC translation. I have not yet gotten a suitable drive or SAT
layer, so any testing help would be appreciated. These changes have been
tested with Seagate Host Aware SATA drives attached to both SAS and SATA
controllers. Also, I do not have any SATA Host Managed devices, and I
suspect that it may take additional (hopefully minor) changes to support
them.
Thanks to Seagate for supplying the test hardware and answering questions.
sbin/camcontrol/Makefile:
Add epc.c and zone.c.
sbin/camcontrol/camcontrol.8:
Document the zone and epc subcommands.
sbin/camcontrol/camcontrol.c:
Add the zone and epc subcommands.
Add auxiliary register support to build_ata_cmd(). Make sure to
set the CAM_ATAIO_NEEDRESULT, CAM_ATAIO_DMA, and CAM_ATAIO_FPDMA
flags as appropriate for ATA commands.
Add a new get_ata_status() function to parse ATA result from SCSI
sense descriptors (for ATA passthrough over SCSI) and ATA I/O
requests.
sbin/camcontrol/camcontrol.h:
Update the build_ata_cmd() prototype
Add get_ata_status(), zone(), and epc().
sbin/camcontrol/epc.c:
Support for ATA Extended Power Conditions features. This includes
support for all features documented in the ACS-4 Revision 12
specification from t13.org (dated February 18, 2016).
The EPC feature set allows putting a drive into a power power mode
immediately, or setting timeouts so that the drive will
automatically enter progressively lower power states after various
idle times.
sbin/camcontrol/fwdownload.c:
Update the firmware download code for the new build_ata_cmd()
arguments.
sbin/camcontrol/zone.c:
Implement support for Shingled Magnetic Recording (SMR) drives
via SCSI Zoned Block Commands (ZBC) and ATA Zoned Device ATA
Command Set (ZAC).
These specs were developed in concert, and are functionally
identical. The primary differences are due to SCSI and ATA
differences. (SCSI is big endian, ATA is little endian, for
example.)
This includes support for all commands defined in the ZBC and
ZAC specs.
sys/cam/ata/ata_all.c:
Decode a number of additional ATA command names in ata_op_string().
Add a new CCB building function, ata_read_log().
Add ata_zac_mgmt_in() and ata_zac_mgmt_out() CCB building
functions. These support both DMA and NCQ encapsulation.
sys/cam/ata/ata_all.h:
Add prototypes for ata_read_log(), ata_zac_mgmt_out(), and
ata_zac_mgmt_in().
sys/cam/ata/ata_da.c:
Revamp the ada(4) driver to support zoned devices.
Add four new probe states to gather information needed for zone
support.
Add a new adasetflags() function to avoid duplication of large
blocks of flag setting between the async handler and register
functions.
Add new sysctl variables that describe zone support and paramters.
Add support for the new BIO_ZONE bio, and all of its subcommands:
DISK_ZONE_OPEN, DISK_ZONE_CLOSE, DISK_ZONE_FINISH, DISK_ZONE_RWP,
DISK_ZONE_REPORT_ZONES, and DISK_ZONE_GET_PARAMS.
sys/cam/scsi/scsi_all.c:
Add command descriptions for the ZBC IN/OUT commands.
Add descriptions for ZBC Host Managed devices.
Add a new function, scsi_ata_pass() to do ATA passthrough over
SCSI. This will eventually replace scsi_ata_pass_16() -- it
can create the 12, 16, and 32-byte variants of the ATA
PASS-THROUGH command, and supports setting all of the
registers defined as of SAT-4, Revision 5 (March 11, 2016).
Change scsi_ata_identify() to use scsi_ata_pass() instead of
scsi_ata_pass_16().
Add a new scsi_ata_read_log() function to facilitate reading
ATA logs via SCSI.
sys/cam/scsi/scsi_all.h:
Add the new ATA PASS-THROUGH(32) command CDB. Add extended and
variable CDB opcodes.
Add Zoned Block Device Characteristics VPD page.
Add ATA Return SCSI sense descriptor.
Add prototypes for scsi_ata_read_log() and scsi_ata_pass().
sys/cam/scsi/scsi_da.c:
Revamp the da(4) driver to support zoned devices.
Add five new probe states, four of which are needed for ATA
devices.
Add five new sysctl variables that describe zone support and
parameters.
The da(4) driver supports SCSI ZBC devices, as well as ATA ZAC
devices when they are attached via a SCSI to ATA Translation (SAT)
layer. Since ZBC -> ZAC translation is a new feature in the T10
SAT-4 spec, most SATA drives will be supported via ATA commands
sent via the SCSI ATA PASS-THROUGH command. The da(4) driver will
prefer the ZBC interface, if it is available, for performance
reasons, but will use the ATA PASS-THROUGH interface to the ZAC
command set if the SAT layer doesn't support translation yet.
As I mentioned above, ZBC command support is untested.
Add support for the new BIO_ZONE bio, and all of its subcommands:
DISK_ZONE_OPEN, DISK_ZONE_CLOSE, DISK_ZONE_FINISH, DISK_ZONE_RWP,
DISK_ZONE_REPORT_ZONES, and DISK_ZONE_GET_PARAMS.
Add scsi_zbc_in() and scsi_zbc_out() CCB building functions.
Add scsi_ata_zac_mgmt_out() and scsi_ata_zac_mgmt_in() CCB/CDB
building functions. Note that these have return values, unlike
almost all other CCB building functions in CAM. The reason is
that they can fail, depending upon the particular combination
of input parameters. The primary failure case is if the user
wants NCQ, but fails to specify additional CDB storage. NCQ
requires using the 32-byte version of the SCSI ATA PASS-THROUGH
command, and the current CAM CDB size is 16 bytes.
sys/cam/scsi/scsi_da.h:
Add ZBC IN and ZBC OUT CDBs and opcodes.
Add SCSI Report Zones data structures.
Add scsi_zbc_in(), scsi_zbc_out(), scsi_ata_zac_mgmt_out(), and
scsi_ata_zac_mgmt_in() prototypes.
sys/dev/ahci/ahci.c:
Fix SEND / RECEIVE FPDMA QUEUED in the ahci(4) driver.
ahci_setup_fis() previously set the top bits of the sector count
register in the FIS to 0 for FPDMA commands. This is okay for
read and write, because the PRIO field is in the only thing in
those bits, and we don't implement that further up the stack.
But, for SEND and RECEIVE FPDMA QUEUED, the subcommand is in that
byte, so it needs to be transmitted to the drive.
In ahci_setup_fis(), always set the the top 8 bits of the
sector count register. We need it in both the standard
and NCQ / FPDMA cases.
sys/geom/eli/g_eli.c:
Pass BIO_ZONE commands through the GELI class.
sys/geom/geom.h:
Add g_io_zonecmd() prototype.
sys/geom/geom_dev.c:
Add new DIOCZONECMD ioctl, which allows sending zone commands to
disks.
sys/geom/geom_disk.c:
Add support for BIO_ZONE commands.
sys/geom/geom_disk.h:
Add a new flag, DISKFLAG_CANZONE, that indicates that a given
GEOM disk client can handle BIO_ZONE commands.
sys/geom/geom_io.c:
Add a new function, g_io_zonecmd(), that handles execution of
BIO_ZONE commands.
Add permissions check for BIO_ZONE commands.
Add command decoding for BIO_ZONE commands.
sys/geom/geom_subr.c:
Add DDB command decoding for BIO_ZONE commands.
sys/kern/subr_devstat.c:
Record statistics for REPORT ZONES commands. Note that the
number of bytes transferred for REPORT ZONES won't quite match
what is received from the harware. This is because we're
necessarily counting bytes coming from the da(4) / ada(4) drivers,
which are using the disk_zone.h interface to communicate up
the stack. The structure sizes it uses are slightly different
than the SCSI and ATA structure sizes.
sys/sys/ata.h:
Add many bit and structure definitions for ZAC, NCQ, and EPC
command support.
sys/sys/bio.h:
Convert the bio_cmd field to a straight enumeration. This will
yield more space for additional commands in the future. After
change r297955 and other related changes, this is now possible.
Converting to an enumeration will also prevent use as a bitmask
in the future.
sys/sys/disk.h:
Define the DIOCZONECMD ioctl.
sys/sys/disk_zone.h:
Add a new API for managing zoned disks. This is very close to
the SCSI ZBC and ATA ZAC standards, but uses integers in native
byte order instead of big endian (SCSI) or little endian (ATA)
byte arrays.
This is intended to offer to the complete feature set of the ZBC
and ZAC disk management without requiring the application developer
to include SCSI or ATA headers. We also use one set of headers
for ioctl consumers and kernel bio-level consumers.
sys/sys/param.h:
Bump __FreeBSD_version for sys/bio.h command changes, and inclusion
of SMR support.
usr.sbin/Makefile:
Add the zonectl utility.
usr.sbin/diskinfo/diskinfo.c
Add disk zoning capability to the 'diskinfo -v' output.
usr.sbin/zonectl/Makefile:
Add zonectl makefile.
usr.sbin/zonectl/zonectl.8
zonectl(8) man page.
usr.sbin/zonectl/zonectl.c
The zonectl(8) utility. This allows managing SCSI or ATA zoned
disks via the disk_zone.h API. You can report zones, reset write
pointers, get parameters, etc.
Sponsored by: Spectra Logic
Differential Revision: https://reviews.freebsd.org/D6147
Reviewed by: wblock (documentation)
While looking at r300073, I noticed these incorrect comments in the context
of the diff.
Reviewed by: imp, jhb
Differential Revision: https://reviews.freebsd.org/D6431
needed in later changes where we may not be able to lock the pic list lock
to perform a lookup, e.g. from within interrupt context.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
opened in O_SYNC mode, at least for UFS. This also handles
truncation, done due to the O_SYNC | O_TRUNC flags combination to
open(2), in synchronous way.
Noted by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
"iflib is a library to eliminate the need for frequently duplicated device
independent logic propagated (poorly) across many network drivers."
Participation is purely optional. The IFLIB kernel config option is
provided for drivers that want to transition between legacy and iflib
modes of operation. ixl and ixgbe driver conversions will be committed
shortly. We hope to see participation from the Broadcom and maybe
Chelsio drivers in the near future.
Submitted by: mmacy@nextbsd.org
Reviewed by: gallatin
Differential Revision: D5211
- Avoid a conditional branch on the return value of sleepq_resume_thread()
by ORing its return value into the boolean wakeup_swapper. This is
consistent with other sleepqueue functions which just pass this return
value to their caller.
- sleepq_resume_thread() unconditionally removes the thread from its queue,
so there's no need to maintain a pointer to the next element in the queue.
MFC after: 2 weeks
It has no counterpart among the other lock primitives and has been a
no-op for years. Mutex consistency checks are generally done whenver
INVARIANTS is enabled.
devd requires location and pnpinfo strings generated by bus drivers
to be formatted as a list of name=value keypairs. Non-conforming
bus drivers cause devd to mis-parse device events for these buses.
Note that this documents the desired requirements. devctl_safe_quote()
doesn't yet escape backslash characters, and devd doesn't handle escaped
characters in quoted values.
Differential Revision: https://reviews.freebsd.org/D6252
intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013.
A robust mutex is guaranteed to be cleared by the system upon either
thread or process owner termination while the mutex is held. The next
mutex locker is then notified about inconsistent mutex state and can
execute (or abandon) corrective actions.
The patch mostly consists of small changes here and there, adding
neccessary checks for the inconsistent and abandoned conditions into
existing paths. Additionally, the thread exit handler was extended to
iterate over the userspace-maintained list of owned robust mutexes,
unlocking and marking as terminated each of them.
The list of owned robust mutexes cannot be maintained atomically
synchronous with the mutex lock state (it is possible in kernel, but
is too expensive). Instead, for the duration of lock or unlock
operation, the current mutex is remembered in a special slot that is
also checked by the kernel at thread termination.
Kernel must be aware about the per-thread location of the heads of
robust mutex lists and the current active mutex slot. When a thread
touches a robust mutex for the first time, a new umtx op syscall is
issued which informs about location of lists heads.
The umtx sleep queues for PP and PI mutexes are split between
non-robust and robust.
Somewhat unrelated changes in the patch:
1. Style.
2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared
pi mutexes.
3. Removal of the userspace struct pthread_mutex m_owner field.
4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls
the lifetime of the shared mutex associated with a vnode' page.
Reviewed by: jilles (previous version, supposedly the objection was fixed)
Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects)
Tested by: pho
Sponsored by: The FreeBSD Foundation
interface with 5 methods to mirror the 5 MSI/MSI-X methods in the pcib
interface. The pcib driver will need to perform a device specific lookup
to find the MSI controller and pass this to intrng as the xref. Intrng
will finally find the controller and have it handle the requested operation.
Obtained from: ABT Systems Ltd
MFH: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5985
It seems that at present vfs_read_dirent() is used only with filesystems
that do not support cookies, so the bug never manifested itself.
MFC after: 1 week
This is a bit hackish, but the flag is currently set only for ZFS
snapshots mounted under .zfs. mountcheckdirs() can change cdir/rdir
references to a covered vnode. But for the said snapshots the covered
vnode is really ephemeral and it must never be accessed (except
for a few specific cases).
To do: consider removing mountcheckdirs() entirely
MFC after: 5 days
Currently, Application Processors (non-boot CPUs) are started by
MD code at SI_SUB_CPU, but they are kept waiting in a "pen" until
SI_SUB_SMP at which point they are released to run kernel threads.
SI_SUB_SMP is one of the last SYSINIT levels, so APs don't enter
the scheduler and start running threads until fairly late in the
boot.
This change moves SI_SUB_SMP up to just before software interrupt
threads are created allowing the APs to start executing kernel
threads much sooner (before any devices are probed). This allows
several initialization routines that need to perform initialization
on all CPUs to now perform that initialization in one step rather
than having to defer the AP initialization to a second SYSINIT run
at SI_SUB_SMP. It also permits all CPUs to be available for
handling interrupts before any devices are probed.
This last feature fixes a problem on with interrupt vector exhaustion.
Specifically, in the old model all device interrupts were routed
onto the boot CPU during boot. Later after the APs were released at
SI_SUB_SMP, interrupts were redistributed across all CPUs.
However, several drivers for multiqueue hardware allocate N interrupts
per CPU in the system. In a system with many CPUs, just a few drivers
doing this could exhaust the available pool of interrupt vectors on
the boot CPU as each driver was allocating N * mp_ncpu vectors on the
boot CPU. Now, drivers will allocate interrupts on their desired CPUs
during boot meaning that only N interrupts are allocated from the boot
CPU instead of N * mp_ncpu.
Some other bits of code can also be simplified as smp_started is
now true much earlier and will now always be true for these bits of
code. This removes the need to treat the single-CPU boot environment
as a special case.
As a transition aid, the new behavior is available under a new kernel
option (EARLY_AP_STARTUP). This will allow the option to be turned off
if need be during initial testing. I plan to enable this on x86 by
default in a followup commit in the next few days and to have all
platforms moved over before 11.0. Once the transition is complete,
the option will be removed along with the !EARLY_AP_STARTUP code.
These changes have only been tested on x86. Other platform maintainers
are encouraged to port their architectures over as well. The main
things to check for are any uses of smp_started in MD code that can be
simplified and SI_SUB_SMP SYSINITs in MD code that can be removed in
the EARLY_AP_STARTUP case (e.g. the interrupt shuffling).
PR: kern/199321
Reviewed by: markj, gnn, kib
Sponsored by: Netflix
missing /dev directory makes one end up with a completely deaf (init
without stdout/stderr) system with no hints on the console, unless
you've booted up with bootverbose.
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
and returns it referenced.
The function is similar to vfs_hash_get(9), but unlike the later,
returned vnode is not locked. This operation cannot be requested with
the vget(9) flags.
Reviewed and tested by: rmacklem
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
bus_get_cpus() returns a specified set of CPUs for a device. It accepts
an enum for the second parameter that indicates the type of cpuset to
request. Currently two valus are supported:
- LOCAL_CPUS (on x86 this returns all the CPUs in the package closest to
the device when DEVICE_NUMA is enabled)
- INTR_CPUS (like LOCAL_CPUS but only returns 1 SMT thread for each core)
For systems that do not support NUMA (or if it is not enabled in the kernel
config), LOCAL_CPUS fails with EINVAL. INTR_CPUS is mapped to 'all_cpus'
by default. The idea is that INTR_CPUS should always return a valid set.
Device drivers which want to use per-CPU interrupts should start using
INTR_CPUS instead of simply assigning interrupts to all available CPUs.
In the future we may wish to add tunables to control the policy of
INTR_CPUS (e.g. should it be local-only or global, should it ignore
SMT threads or not).
The x86 nexus driver exposes the internal set of interrupt CPUs from the
the x86 interrupt code via INTR_CPUS.
The ACPI bus driver and PCI bridge drivers use _PXM to return a suitable
LOCAL_CPUS set when _PXM exists and DEVICE_NUMA is enabled. They also and
the global INTR_CPUS set from the nexus driver with the per-domain set from
_PXM to generate a local INTR_CPUS set for child devices.
Compared to the r298933, this version uses 'struct _cpuset' in
<sys/bus.h> instead of 'cpuset_t' to avoid requiring <sys/param.h>
(<sys/_cpuset.h> still requires <sys/param.h> for MAXCPU even though
<sys/_bitset.h> does not after recent changes).
