This is mostly mechanical except for vmspace_exit(). There, use the new
refcount_release_if_last() to avoid switching to vmspace0 unless other
processes are sharing the vmspace. In that case, upon switching to
vmspace0 we can unconditionally release the reference.
Remove the volatile qualifier from vm_refcnt now that accesses are
protected using refcount(9) KPIs.
Reviewed by: alc, kib, mmel
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27057
- Get the number of classes from chip_params.
- Get the number of ethofld tids from the firmware.
- Do not let tcp_ratelimit allocate all traffic classes.
Sponsored by: Chelsio Communications
In certain edge cases, the NIC might have only received a partial TLS
record which it needs to return to the driver. For example, if the
local socket was closed while data was still in flight, a partial TLS
record might be pending when the connection is closed. Receiving a
RST in the middle of a TLS record is another example. When this
happens, the firmware returns the the partial TLS record as plain TCP
data via CPL_RX_DATA. Handle these requests by returning an error to
OpenSSL (via so_error for KTLS or via an error TLS record header for
the older Chelsio OpenSSL interface).
Reported by: Sony Arpita Das @ Chelsio
Reviewed by: np
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision: Revision: https://reviews.freebsd.org/D26800
The firmware can allocate ingress and egress context ids anywhere from
its configured range. Size the iq/eq maps to match the entire range
instead of assuming that the firmware always allocates the first
available context id.
Reported by: Baptiste Wicht @ Verisign
MFC after: 1 week
Sponsored by: Chelsio Communications
Flow control was disabled during initial TOE TLS development to
workaround a hang (and to match the Linux TOE TLS support for T6).
The rest of the TOE TLS code maintained credits as if flow control was
enabled which was inherited from before the workaround was added with
the exception that the receive window was allowed to go negative.
This negative receive window handling (rcv_over) was because I hadn't
realized the full implications of disabling flow control.
To clean this up, re-enable flow control on TOE TLS sockets. The
existing TPF_FORCE_CREDITS workaround is sufficient for the original
hang. Now that flow control is enabled, remove the rcv_over
workaround and instead assert that the receive window never goes
negative matching plain TCP TOE sockets.
Reviewed by: np
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D26799
r365732 was the first attempt to get an accurate count but it was
writing to some read-only registers to clear them and that obviously
didn't work. Instead, note the counter's value when it is supposed to
be cleared and subtract it from future readings.
dev.<port>.stats.rx_fcs_error should not be serviced from the MPS
register for T6.
The stats.* sysctls should all use T5_PORT_REG for T5 and above. This
must have been missed in the initial T5 support years ago. Fix it while
here.
MFC after: 3 days
Sponsored by: Chelsio Communications
These kind of drops come for free in the sense that they do not use the
filter TCAM or any other resource that wouldn't normally be used during
rx. Frames dropped by the hardware get counted in the MAC's rx stats
but are not delivered to the driver.
hw.cxgbe.attack_filter
Set to 1 to enable the "attack filter". Default is 0. The attack
filter will drop an incoming frame if any of these conditions is true:
src ip/ip6 == dst ip/ip6; tcp and src/dst ip is not unicast; src/dst ip
is loopback (127.x.y.z); src ip6 is not unicast; src/dst ip6 is loopback
(::1/128) or unspecified (::/128); tcp and src/dst ip6 is mcast
(ff00::/8).
hw.cxgbe.drop_ip_fragments
Set to 1 to drop all incoming IP fragments. Default is 0. Note that
this drops valid frames.
hw.cxgbe.drop_pkts_with_l2_errors
Set to 1 to drop incoming frames with Layer 2 length or checksum errors.
Default is 1.
hw.cxgbe.drop_pkts_with_l3_errors
Set to 1 to drop incoming frames with IP version, length, or checksum
errors. Default is 0.
hw.cxgbe.drop_pkts_with_l4_errors
Set to 1 to drop incoming frames with Layer 4 length, checksum, or other
errors. Default is 0.
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Both cxgbe(4) and mlx5(4) wrapped the existing send tag header with
their own identical headers that stored the type that the
type-specific tag structures inherited from, so in practice it seems
drivers need this in the tag anyway. This permits removing these
extra header indirections (struct cxgbe_snd_tag and struct
mlx5e_snd_tag).
In addition, this permits driver-independent code to query the type of
a tag, e.g. to know what type of tag is being queried via
if_snd_query.
Reviewed by: gallatin, hselasky, np, kib
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D26689
These tunables can only be set to a valid cluster size (2K, 4K, 9K, or
16K) as documented in the man page. Anything else could lead to a
panic on interface up.
Reported by: mav@
MFC after: 1 week
Sponsored by: Chelsio Communications
ccr(4) uses software to handle GCM and CCM requests not supported by
the crypto engine (e.g. with only AAD and no payload). This change
adds a fallback for a few more requests such as those with more SGL
entries than can fit in a work request (this can happen for GCM when
decrypting a TLS record split across 15 or more packets).
Reported by: Chelsio QA
Reviewed by: np
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D26582
Bind the netmap tx queues to a special '0xff' scheduling class which
makes the firmware skip some processing related to rate limiting on the
outgoing traffic. Future firmwares will do this automatically.
MFC after: 1 week
Sponsored by: Chelsio Communications
- Only active netmap receive queues should be in the RSS lookup table.
- The RSS table should be restored for NIC operation when the last
active netmap queue is switched off, not the first one.
- Support repeated netmap ON/OFF on a subset of the queues. This works
whether the the queues being enabled and disabled are the only ones
active or not. Some kring indexes have to be reset in the driver for
the second case.
MFC after: 1 week
Sponsored by: Chelsio Communications
This allows the PF interfaces to communicate with the VF interfaces over
the internal switch in the ASIC. Fix the GL limits for VM work requests
while here.
MFC after: 3 days
Sponsored by: Chelsio Communications
Hardware assistance includes checksumming (tx and rx), TSO, and RSS on
the inner traffic in a VXLAN tunnel.
Relnotes: Yes
Sponsored by: Chelsio Communications
crypto(9) functions can now be used on buffers composed of an array of
vm_page_t structures, such as those stored in an unmapped struct bio. It
requires the running to kernel to support the direct memory map, so not all
architectures can use it.
Reviewed by: markj, kib, jhb, mjg, mat, bcr (manpages)
MFC after: 1 week
Sponsored by: Axcient
Differential Revision: https://reviews.freebsd.org/D25671
Rx is more efficient within the chip when the receive buffer size
matches the TLS PDU size.
MFC after: 3 days
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D26127
to coalesce tx work requests.
Note that Coverity will still treat this as an out-of-bounds access. We
do want to compare 16B starting from ethmacdst but cmp_l2hdr was was
going beyond that by 2B.
cmp_l2hdr was introduced in r362905.
Reported by: Coverity (CID 1430284)
Sponsored by: Chelsio Communications
- Ask the firmware for the number of frames that can be stuffed in one
work request.
- Modify mp_ring to increase the likelihood of tx coalescing when there
are just one or two threads that are doing most of the tx. Add teeth
to the abdication mechanism by pushing the consumer lock into mp_ring.
This reduces the likelihood that a consumer will get stuck with all
the work even though it is above its budget.
- Add support for coalesced tx WR to the VF driver. This, with the
changes above, results in a 7x improvement in the tx pps of the VF
driver for some common cases. The firmware vets the L2 headers
submitted by the VF driver and it's a big win if the checks are
performed for a batch of packets and not each one individually.
Reviewed by: jhb@
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D25454
- Move temporary sglists into the session structure and protect them
with a per-session lock instead of a per-adapter lock.
- Retire an unused session field, and move a debugging field under
INVARIANTS to avoid using the session lock for completion handling
when INVARIANTS isn't enabled.
- Use counter_u64 for per-adapter statistics.
Note that this helps for cases where multiple sessions are used
(e.g. multiple IPsec SAs or multiple KTLS connections). It does not
help for workloads that use a single session (e.g. a single GELI
volume).
Reviewed by: np
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D25457
In addition to reducing lines of code, this also ensures that the full
allocation is always zeroed avoiding possible bugs with incorrect
lengths passed to explicit_bzero().
Suggested by: cem
Reviewed by: cem, delphij
Approved by: csprng (cem)
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D25435
There were quite a few places where port_info was being accessed only to
get to the adapter.
Reviewed by: jhb@
MFC after: 1 week
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D25432
fibX_lookup_nh_ext().
fibX_lookup_nh_ represents pre-epoch generation of fib kpi,
providing less guarantees over pointer validness and requiring
on-stack data copying.
Reviewed by: np
Differential Revision: https://reviews.freebsd.org/D24975
Remove TSO from the toggle mask when automatically disabled by TXCKSUM* in
various NIC drivers.
Reviewed by: hselasky, np, gallatin, jpaetzel
Approved by: mav (mentor)
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D25120
Some crypto consumers such as GELI and KTLS for file-backed sendfile
need to store their output in a separate buffer from the input.
Currently these consumers copy the contents of the input buffer into
the output buffer and queue an in-place crypto operation on the output
buffer. Using a separate output buffer avoids this copy.
- Create a new 'struct crypto_buffer' describing a crypto buffer
containing a type and type-specific fields. crp_ilen is gone,
instead buffers that use a flat kernel buffer have a cb_buf_len
field for their length. The length of other buffer types is
inferred from the backing store (e.g. uio_resid for a uio).
Requests now have two such structures: crp_buf for the input buffer,
and crp_obuf for the output buffer.
- Consumers now use helper functions (crypto_use_*,
e.g. crypto_use_mbuf()) to configure the input buffer. If an output
buffer is not configured, the request still modifies the input
buffer in-place. A consumer uses a second set of helper functions
(crypto_use_output_*) to configure an output buffer.
- Consumers must request support for separate output buffers when
creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are
only permitted to queue a request with a separate output buffer on
sessions with this flag set. Existing drivers already reject
sessions with unknown flags, so this permits drivers to be modified
to support this extension without requiring all drivers to change.
- Several data-related functions now have matching versions that
operate on an explicit buffer (e.g. crypto_apply_buf,
crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf).
- Most of the existing data-related functions operate on the input
buffer. However crypto_copyback always writes to the output buffer
if a request uses a separate output buffer.
- For the regions in input/output buffers, the following conventions
are followed:
- AAD and IV are always present in input only and their
fields are offsets into the input buffer.
- payload is always present in both buffers. If a request uses a
separate output buffer, it must set a new crp_payload_start_output
field to the offset of the payload in the output buffer.
- digest is in the input buffer for verify operations, and in the
output buffer for compute operations. crp_digest_start is relative
to the appropriate buffer.
- Add a crypto buffer cursor abstraction. This is a more general form
of some bits in the cryptosoft driver that tried to always use uio's.
However, compared to the original code, this avoids rewalking the uio
iovec array for requests with multiple vectors. It also avoids
allocate an iovec array for mbufs and populating it by instead walking
the mbuf chain directly.
- Update the cryptosoft(4) driver to support separate output buffers
making use of the cursor abstraction.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D24545
