Since d49e83eac3, iflib(9) is ready
for this change.
While at it, make isc_driver_version strings (static) const where
not apparently un-const on purpose, too.
This reduces the size of the amd64 GENERIC by about 10 KiB.
This has been off by one in the FreeBSD drivers as far back as I've
looked. Emperically HW and SW emulations I have available don't seem to
mind. Noticed while debugging other issues.
MFC after: 3 days
Disable TSO on lem(4) and em(4) until a ring stall can be debugged.
I am not able to reproduce the issue on lem(4) but disabling there in
abundance of caution in case the issue is not specific to em(4).
Reported by: grog
Most em(4) devices now enjoy TSO and TSO6, matching NetBSD and Linux
defaults.
A prior commit automasks TSO on 10/100 Ethernet due to errata and other
bugs for IPv6 were fixed recently allowing this.
Mike Karels identified a performance anomaly on Intel 82574L devices.
These are multiqueue enabled on FreeBSD since the conversion to
iflib. I am investigating whether this can be fixed, in the mean time
MSI-X with checksum offloads remain default.
i219 SPT devices have an errata that downclocks the DMA engine, which
results in TSO not being able to acheive line rate. Therefore, it is
disabled on:
* Intel(R) I219-LM and I219-V SPT
* Intel(R) I219-LM and I219-V SPT-H (2)
* Intel(R) I219-LM and I219-V LBG (3)
* Intel(R) I219-LM and I219-V SPT (4)
* Intel(R) I219-LM and I219-V SPT (5)
Many lem(4) devices enjoy TSO, exceptions being 82542, 82543, 82547.
TSO6 may be possible for some chipsets but I am still working through
my testing matrix and that is hidden behind hw.em.unsupported_tso.
If you encounter issues, you may disable TSO with for example:
ifconfig em0 -tso -tso6.
I ask to be informed of any deviations from normal operation requiring
this.
Thanks to cc@ for access to emulab.net.
On a sample I219 system it saves about 16% CPU on IPv4 and 19% on IPv6.
iperf3 -Vc reported numbers:
total% user% system%
IPv4 TSO
21.3 7 14.4
21.4 6 15.4
21.5 6 15.5
IPv4 no TSO
36.8 5.4 31.4
38.5 5.1 33.5
38.2 5.7 32.6
IPv4 no TSO no TXCSUM
45.1 5.8 39.3
46 6.3 39.7
46.2 5.9 40.4
IPv6 TSO6
21.7 5.4 16.3
21.6 5.1 16.5
21.9 5.6 16.3
IPv6 no TSO6
41.2 5.2 36
41 5.1 36
40.8 5.2 35.7
IPv6 no TSO6 no TXCSUM6
49 5.9 43.1
48.8 4.9 43.9
49 5.6 43.4
Tested by: cc (lem(4)), karels (82574L)
MFC after: 3 months
Relnotes: yes
Sponsored by: BBOX.io
Differential Revision: https://reviews.freebsd.org/D41170
This feature masks TSO capability when a link comes up at 10 or 100mbit
due to errata on the chips. This behavior matches previous versions of
FreeBSD as well as NetBSD and Linux.
A tunable, hw.em.unsupported_tso may be set if the admin desires to
disabling automasking and configure TSO settings manually.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D41170
Also disable IPV6 checksum offload.
Spell hw->mac.type < e1000_82543 as e1000_82542. Confusingly, chips
like 82540 and 82541 come later and do not have these issues. There
is no functional change here, as the enum was defined in such a way
it worked correctly. But this reads literally.
MFC after: 1 week
Explicitly set ipcss/ipcse/ipcso for IPv6 per intel SDM as indicated in
inline comments.
Fix and consolidate 82543/82547 hwcsum exemption.
While here rearrange and expand some commentary.
* em(4) obey administrative ifcaps for using hwcsum offload
* em(4) obey administrative ifcaps for hw vlan receive tagging
* em(4) add additional TSO6 ifcap, but disabled by default as is TSO4
* lem(4) obey administrative ifcaps for using hwcsum offload
* lem(4) add support for hw vlan receive tagging
* lem(4) Add ifcaps for TSO offload experimentation, but disabled by
default due to errata and possibly missing txrx code.
* lem(4) disable HWCSUM ifcaps by default on 82547 due to errata around
full duplex links. It may still be administratively enabled.
Reviewed by: markj (previous version)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D30072
* em(4) obey administrative ifcaps for using hwcsum offload
* em(4) obey administrative ifcaps for hw vlan receive tagging
* em(4) add additional TSO6 ifcap, but disabled by default as is TSO4
* lem(4) obey administrative ifcaps for using hwcsum offload
* lem(4) add support for hw vlan receive tagging
* lem(4) Add ifcaps for TSO offload experimentation, but disabled by
default due to errata and possibly missing txrx code.
* lem(4) disable HWCSUM ifcaps by default on 82547 due to errata around
full duplex links. It may still be administratively enabled.
Reviewed by: markj (previous version)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D30072
Always set TXD_CMD_IP for 82544
Otherwise set TXD_CMD_IP for IPv4, not IPv6
Reviewed by: markj (previous version)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D30072
VLAN 0 essentially means "Treat as untagged, but with priority bits",
and is used by some ISPs.
On igb/em interfaces we did not receive packets with VLAN tag 0 unless
vlanhwfilter was disabled.
This can be fixed by explicitly listing VLAN 0 in the hardware VLAN
filter (VFTA). Do this from em_setup_vlan_hw_support(), where we already
(re-)write the VFTA.
Reviewed by: kbowling
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D40046
Ungate DMA clock on TGP and later to avoid packet loss.
A similar fix appears in Linux 639e298f432fb058a9496ea16863f53b1ce935fe
This may be needed as far back as SPT but no confirmation from intel or
other OS yet.
Obtained from: OpenBSD (if_em_hw.c 1.116)
MFC after: 2 weeks
Sponsored by: BBOX.io
This call only makes sense for ich8lan, and the shared code does it in
e1000_setup_init_funcs() above this deletion.
Obtained from: DPDK
MFC after: 2 weeks
Sponsored by: BBOX.io
Pull Request: https://github.com/freebsd/freebsd-src/pull/539
Incrementing these to avoid confusion in users; we are on par with these
out of tree versions.
Reviewed by: erj
MFC after: 2 weeks
Sponsored by: BBOX.io
Pull Request: https://github.com/freebsd/freebsd-src/pull/540
Clear the rings before reset to avoid a HW hang.
Inspired by em-7.7.8 and DPDK (1fc9701238edcf0541289b9ae15565b6d9d7ab30)
Reviewed by: erj
MFC after: 2 weeks
Sponsored by: BBOX.io
Pull Request: https://github.com/freebsd/freebsd-src/pull/540
These include I219 (20) through I219 (23), which ends at Raptor Lake.
This also corrects a discrepancy where the (16) devices should be
mac type "e1000_pch_tgp" and not "e1000_pch_adp".
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
PR: 269224
Reviewed by: erj@
MFC after: 1 day
Relnotes: yes
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D38376
Extend the size of the local rx_buffer_size variable to account for
larger buffer sizes possible on 82580, i350 chips.
From i350 datasheet, 6.2.10 Initialization Control 4 (LAN Base Address
+ Offset 0x13):
When 4 ports are enabled maximum buffer size is 36 KB. When 2 ports are
enabled maximum buffer size is 72 KB. When only a single port is
enabled maximum buffer size is 144 KB.
and 8.3:
The overall available internal buffer size in the I350 for all ports is
144 KB for receive buffers and 80 KB for transmit Buffers. Disabled
ports memory can be shared between active ports and sharing can be
asymmetric. The default buffer size for each port is loaded from the
EEPROM on initialization.
From the reporter:
But for I350 when only 2 ports are used PBA size can be set as 72KB
(see datasheet RXPbsize or e1000_rxpbs_adjust_82580 function in
e1000_82575.c). In this case calculating the rx_buffer_size overflows
as 0x0048 << 10 = 73728 or 0x12000 pushed into u16. It is then set as
0x2000 or 8192.
PR: 263896
Reported by: hannula@gmail.com
Tested by: hannula@gmail.com
Approved by: markj
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D35167
Currently if an e1000 interface is set to a fixed media configuration,
for gigabit, it will participate in auto-negotiation as required by
IEEE 802.3-2018 Clause 37. However, if set to fixed media configuration
for 100 or 10, it does NOT participate in auto-negotiation.
By my reading of Clauses 28 and 37, while auto-negotiation is optional
for 100 and 10, it is not prohibited and is, in fact, "highly
recommended".
This patch enables auto-negotiation for fixed 100 and 10 media
configuration, in a similar manner to that already performed for 1000.
I.e., the patch enables advertising of just the manually configured
settings with the goal of allowing the remote end to match the manually
configured settings if it has them available.
To be clear, this patch does NOT allow an em(4) interface that has been
manually configured with specific media settings to respond to
auto-negotiation by then configuring different parameters to those that
were manually configured. The intent of this patch is to fully comply
with the requirements of Clause 37, but for 100 and 10.
The need for this has arisen on an em(4) link where the other end is
under a different administrative control and is set to full
auto-negotiation. Due to the cable length GigE is not working well. It
is desired to set the em(4) end to "media 100baseTX mediatype
full-duplex" which does work when both ends are configured that way.
Currently, because em(4) does not participate in autoneg for this
setting, the remote defaults to half-duplex - i.e., there's a duplex
mismatch and things don't work. With this patch, em(4) would inform the
remote that it has only 100baseTX full, the remote would match that and
it will work.
Approved by: erj
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D34449
The logic that sets iri_vtag and M_VLANTAG does not handle the
case where the 802.11q VLAN tag is 0. Fix this issue across
the iflib drivers. While there, also improve and align the
VLAN tag check extraction, by moving it outside the RX descriptor
loop, eliminating a local variable and additional checks.
PR: 260068
Reviewed by: kbowling, gallatin
Reported by: erj
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33156
Since isc_capenable (private copy of ifp->if_capenable) is
now synchronized to if_capenable, use it in the drivers
when checking the IFCAP_* bits.
This results in better cache usage and avoids indirection
through the ifp pointer.
PR: 260068
Reviewed by: kbowling, gallatin
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D33156
The e1000 drivers (em, lem, igb) are currently looking at the
iflib copies of the capabilities bitvectors (scctx->isc_capabilities
and scctx->isc_capenable) rather than the ifnet ones
(ifp->if_capabilities and ifp->if_capenable). However, the latter
are the ones that are actually updated by ifconfig and that should
be used by the drivers during interface operation. The former are
set by the driver on interface attach (for iflib internal use)
and should not be used anymore by the driver.
This patch fixes the e1000 driver to use the correct bitvectors.
PR: 260068
Reviewed by: markj
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D33154
This reverts commit 266f97b5e9, reversing
changes made to a10253cffe.
A mismerge of a merge to catch up to main resulted in files being
committed which should not have been.
Similarly to the other Intel drivers, don't try to process
RX checksum offloads when this feature (IFCAP_RXCSUM) is
disabled.
Reviewed by: gallatin, kbowling, erj
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D33155
The ifp (struct ifnet) backpointer in the e1000 private ifnet
data is not used anymore since the iflib transition.
Remove it so that developers are not tempted to use it and
get a NULL pointer dereference.
Reviewed by: markj, kbowling, erj
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D33157
This is useful for diagnosing problems. In particular, the errata
sheets identify the EEPROM version for many fixes.
Reviewed by: gallatin
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D32333
Otherwise results in KASSERT with debug kernels because we rely on the
iflib CTX lock to implement the software serialization to the NVM model
Reviewed by: gallatin
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D32333
Drop arguments of function prototypes since the file is mixed between
listing arg names and not.
No functional changes
Reviewed by: markj
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D32329
A change to MSI-X link handler was somehow causing issues on
MSI-based em(4) NICs.
Revert the change based on user reports and testing.
PR: 258551
Reported by: Franco Fichtner <franco@opnsense.org>, t_uemura@macome.co.jp
Reviewed by: markj, Franco Fichtner <franco@opnsense.org>
Tested by: t_uemura@macome.co.jp
MFC after: 1 day