Like other dwc3 controller, on Xilinx ZynqMP the base node is just here
to provide resets, the main dwc3 controller node is a child node.
Sponsored by: Beckhoff Automation GmbH & Co. KG
The XHCI controller on 64-bit SoCs need to use 64-bit DMA.
Add a quirk to tell the generic XHCI driver that 32-bit DMA needs
to be used, if there are any that may need to use 32-bit DMA only.
Reviewed by: andrew
Obtained from: Juniper Networks, Inc.
9600 was a standard baud rate decades ago, but 115200 is now more common
so choose defaults that are useful to the largest number of users.
Note that boot0sio does not support rates above 9600 so it remains
unchanged.
Reviewed by: bz, imp, manu
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D36295
In commit c77bfaa750 uhid(4) gained support for ioctl from
USB_GET_DEVICEINFO. This is used in libraries like libfido2 to
retrieve information about a device.
This commit adds binary compatible version to hidraw(4).
PR: 264843
MFC after: 1 month
Requested by: grembo
Some devices like Apple HID-over-SPI may contain more than one report
descriptors necessitating creation of multiple hidbus children.
Add indentificator of child devices to distinct them.
No functional changes intended.
Differential Revision: https://reviews.freebsd.org/D41246
While at it, correct the string for 300 series ones, these also are
already xHCI 3.1.
Fixes: d171d2f2 Add AHCI/XHCI device IDs found on AMD Ryzen+B350 system
Refactor to eliminate duplicated rate and delay tables, with minor style
tweaks for changed lines. Remove an obsolete comment about needing to
convert from microseconds to ticks (that's done elsewhere). Remove
traiing whitespace in kbdcontrol.c.
Except for the new warning, no change in behavior
Sponsored by: DSS GmbH
Reviewed by: imp [minor style tweaks as well]
Pull Request: https://github.com/freebsd/pull/683
Differential Revision: https://reviews.freebsd.org/D38818
Add support for LAN port found on Thinkpad Hybrid USB-C with USB-A dock.
While here fix a small typo
- s/UBS/USB/
Sponsored by: Technical University of Munich
Reviewed by: markj
MFC after: 2 weeks
Pull Request: https://github.com/freebsd/freebsd-src/pull/791
After removing the -FreeBSD and -NetBSD, we're left with a nuber of
BSD-2-Clause AND BSD-2-Clause, so tidy that up.
Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix
The SPDX folks have obsoleted the BSD-2-Clause-NetBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.
Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix
The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.
Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix
The MT2 uses a compact report format, but otherwise is similar in many
ways to the internal trackpads, it even uses the same mode switching
commands.
Reviewed by: wulf
MFC after: 1 month
Differential revision: https://reviews.freebsd.org/D34437
Bad behaving user-space USB applicatoins may crash the kernel by issuing
USB FS related ioctl(2)'s out of their expected order. By default
the USB FS ioctl(2) interface is only available to the
administrator, root, and driver applications like webcamd(8) needs
to be hijacked in order for this to happen.
The issue is the fast-path code does not always see updates made
by the slow-path code, and may then work on freed memory.
This is easily fixed by using an EPOCH(9) type of synchronization
mechanism. A SX(9) lock will be used as a substitute for EPOCH(9),
due to the need for sleepability. In addition most calls going into
the fast-path originate from a single user-space process and the
need for multi-thread performance is not present.
Differential Revision: https://reviews.freebsd.org/D39373
Reviewed by: markj@
Reported by: C Turt <ecturt@gmail.com>
admbugs: 994
MFC after: 1 week
Sponsored by: NVIDIA Networking
Move code in switch cases into own functions to make later changes easier to track.
No functional change, except for removing a superfluous break statement when
range checking USB_FS_MAX_FRAMES, in the USB_FS_OPEN case.
It should not have been there at all.
Suggested by: emaste@
MFC after: 1 week
Sponsored by: NVIDIA Networking
And minor style fixes.
Reviewed by: hselasky
Tested by: Weitao Wang <WeitaoWang-oc@zhaoxin.com>
Fixes: 0d7064d58f xhci(4): Add new USB IDs
Differential Revision: https://reviews.freebsd.org/D38921
Also add the EM160R to the man page, noting the work-around
required to make it function properly in PPP mode.
MFC-After: 1 week
Sponsored by: Metify Inc.
Sponsored by: Klara Inc.
Polling is currently only implemented in the xhci pci attachment.
Adding it to dwc3 doesn't make it much uglier, and supporting it can be
useful for confirming that hardware's otherwise functional when
interrupts are apparently not firing.
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D38816
FreeBSD-9 had introduced support for the full set of Unicode
characters to the parsing and processing of keymap character tables.
This support has been extended to cover the table for accented
characters that are reached via dead key combinations in FreeBSD-13.2.
New ioctls have been introduced to support both the pre-Unicode and
the Unicode formats and keyboard drivers have been extended to support
those ioctls.
This commit makes the ABI compatibility functions in the kernel
optional and dependent on COMPAT_FREEBSD13 in -CURRENT.
The kbdcontrol command in -CURRENT and 13-STABLE (before 13.2) has
been made ABI compatible with old kernels to allow a new world to be
run on an old kernel (that does not have full Unicode support for
keymaps).
This commit is not to merged back to 12-STABLE or 13-STABLE. It is
part of review D38465, which has been split into 3 separate commits
due to different MFC and life-time requirements of either commit.
Approved by: imp
Differential Revision: https://reviews.freebsd.org/D38465
Support for Unicode characters had been added to the keyboard code,
but there are keymaps that have accented characters accessed via dead
key combinations, and those were still restricted to 8 bit codes.
This update to kbd.c adds support for Unicode characters and
compatibility code that allows a kbdcontrol command built from kbio.h
without these patches to work on a new kernel.
Compatibility code that allows a new kbdcontrol binary running on an
old kernel to load and display the dead key map will be committed in a
separate commit.
Reviewed by: imp, brooks
Approved by: brooks
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D38381
- remove Huawei 3G E3131 (E3131_INIT):
- frees up 0x1505/0x14fe shared IDs => product is EOL (since...)
- 3G networks are shutdown/scheduled
- E3131 devices will still work the same via scsi_huawei_eject2
- new 4G devices will switch & report correctly now
Reviewed by: imp
Pull Request: https://github.com/freebsd/freebsd-src/pull/633
Switch the now added E5573Cs322_ECM (0x14db) as well per default to NCM.
With this patch we default all devices to simple NCM mode to avoid the
problem and get a consistent reliable behavior. No matter what firmware
version and provider mix are involved.
Rationale:
Even the bigger SOC shows under complex load in ECM (double-nat) mode
the same performance drop from 25Mbit to 2Mbit Line Speed, similar to E3372h.
Reason: Thermal problems (reported via serial debug interface in ACM Mode)
after 2-3 minutes load.
Fix the root cause and bundle a working firmware is out of reach because
Huawei sells the same hardware, different (crippled) firmware versions
at different price points in different markets as strategy.
Reviewed by: imp
Pull Request: https://github.com/freebsd/freebsd-src/pull/633
Add initialization for new Huawei 4G E3372_NCM, E3372v153_NCM,
E5573Cs322_NCM, E5573Cs322_ECM, and E5573Cs322_ACM.
Remove now-obsolete Huawei 3G E3131 init sequence. These devices are
obsolete, share IDs with new devices and the 3G networks are shutdown.
These old devices work correctly via the 4G code while still allowing
the shared IDs to work differently for the new devices.
Reviewed by: imp
Pull Request: https://github.com/freebsd/freebsd-src/pull/633