Gcc noticed that the result of the bit shift is always zero. Shift so
that the ATC_CS_C67 bits end up in bits 6 & 7.
Reviewed by: grehan, tychon
Approved by: markj (mentor)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D11775
Gcc complained that e82545_tx_thread has a return type declared but
doesn't return anything. Annotate the procedure with _Noreturn.
Reviewed by: grehan
Approved by: markj (mentor)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D11774
Given that RFC7530 allows uid/gids to be placed in owner/owner_group
strings directly, many NFSv4 environments don't need the nfsuserd.
This small patch modified /etc/rc.d/nfsd so that it does not force
startup of the nfsuserd daemon unless nfs_server_managegids is enabled.
This implies that nfsuserd_enable="YES" must be added to /etc/rc.conf
for NFSv4 server environments that use Kerberos mounts or clients that
do not support the uid/gid in string capability.
Since this could be considered a POLA violation, it will not be MFC'd.
Discussed on: freebsd-current
[CodeGenPrepare] Cut off FindAllMemoryUses if there are too many uses.
This avoids excessive compile time. The case I'm looking at is
Function.cpp from an old version of LLVM that still had the giant
memcmp string matcher in it. Before r308322 this compiled in about 2
minutes, after it, clang takes infinite* time to compile it. With
this patch we're at 5 min, which is still bad but this is a
pathological case.
The cut off at 20 uses was chosen by looking at other cut-offs in LLVM
for user scanning. It's probably too high, but does the job and is
very unlikely to regress anything.
Fixes PR33900.
* I'm impatient and aborted after 15 minutes, on the bug report it was
killed after 2h.
Pull in r308986 from upstream llvm trunk (by Simon Pilgrim):
[X86][CGP] Reduce memcmp() expansion to 2 load pairs (PR33914)
D35067/rL308322 attempted to support up to 4 load pairs for memcmp
inlining which resulted in regressions for some optimized libc memcmp
implementations (PR33914).
Until we can match these more optimal cases, this patch reduces the
memcmp expansion to a maximum of 2 load pairs (which matches what we
do for -Os).
This patch should be considered for the 5.0.0 release branch as well
Differential Revision: https://reviews.llvm.org/D35830
These fix a hang (or extremely long compile time) when building older
LLVM ports.
Reported by: antoine
PR: 219139
kldfind() only matches kernel modules, so if you link imgact_binmisc directly
into the kernel, binmiscctl can't find it, tries to load it, and errors
out with:
Can't load imgact_binmisc kernel module: File exists
A quick search of other base commands shows that the correct procedure is to
call modfind(), and then try kldload() if that fails.
PR: 218593
Submitted by: Dan Nelson <dnelson_1901@yahoo.com>
MFC after: 1 week
pmap_remap_vm_attr() function requires indexes to
pte2_attr_tab as the arguments (VM_MEMATTR_).
Mistakenly, instead of them, actual values from the
table were used (PTE2_ATTR_), when applying
work-around for Marvell Armada 38x SoCs.
Submitted by: Marcin Wojtas (mw@semihalf.com)
Reported by: Rafal Kozik (rk@semihalf.com)
Reviewed by: cognet (mentor)
Approved by: cognet (mentor)
Obtained from: Semihalf
Differential Revision: https://reviews.freebsd.org/D11704
The ksyms(4) device was added specifically for use by lockstat(1), which
as a DTrace consumer must run as root.
Discussed with: emaste
MFC after: 3 days
.cvs into the image.
This makes .gitignore files in the working tree appear in the final
tree...
PR: 192178
Submitted by: Jason Unovitch
Sponsored by: Netflix
MFC After: 3 days
The defualt NANO_PACKAGE_LIST is *, which fails to work
properly. Expand glob characters and make sure that we install the
special pkg package first.
Sponsored by: Netflix
Submitted by: wout at canodus dot be
PR: 219405
MFC After: 3 days
The TEX index is selected using (TEX0 C B) bits
from the L2 descriptor. Use correct index by masking
and shifting those bits accordingly.
Differential Revision: https://reviews.freebsd.org/D11703
queue lock when the uppoer stack is called inside TCP_LRO
Submitted by: Kevin Bowling <kevin.bowling@kev009.com>
Reviewed by: erj
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D11724
were redundant and not being used to set anything up.
Submitted by: Matt Macy <mmacy@mattmacy.io>
Reported by: Jeb Cramer <cramerj@intel.com>
Sponsored by: Limelight Networks
This patch defines a macro that checks for MNTK_UNMOUNTF and replaces
explicit checks with this macro. It has no effect on semantics, but
prepares the code for a future patch where there will also be a
NFS specific flag for "forced dismount about to occur".
Suggested by: kib
MFC after: 2 weeks
New kern.lognosys values are
1 - log to ctty
2 - log to console
3 - log to both.
Inspired by: eugen
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
This largely reverts FreeBSD SVN change 289937 from October 25th, 2015.
The intent of that change was to keep loop IDs persistent across
chip reinits.
The problem is that the change turned on the PREVLOOP /
PREV_ADDRESS bit (bit 7 in Firmware Options 2), which tells the
Qlogic chip to not participate in the loop if it can't get the
requested loop address. It also turned off soft addressing on 2400
(4Gb) and newer controllers.
The isp(4) driver defaults to loop address 0, and the tape drives
I have tested default to loop address 0 if hard addressing is turned
on. So when hard loop addressing is turned on on the drive, the isp(4)
driver just refuses to participate in the loop.
The solution is to largely revert that change. I left some elements
in place that are related to virtual ports, since they were new.
This does work with IBM tape drives with hard and soft addressing
turned on. I have tested it with 4Gb, 8Gb, and 16Gb controllers.
sys/dev/isp.c:
Largely revert FreeBSD SVN change 289937. I left the
ispmbox.h changes in place.
Don't use the PREV_ADDRESS bit on initialization. It tells
the chip to not participate if it can't get the requested
loop ID.
Do use soft addressing on 2400 and newer chips.
Use hard addressing when the user has requested a specific
initiator ID. (hint.isp.X.iid=N in /boot/loader.conf)
Leave some of the virtual port options from that change in
place, but don't turn on the PREV_ADDRESS bit.
Reviewed by: mav
MFC after: 3 days
Sponsored by: Spectra Logic
this to be too restrictive. We need to have both broadcast and unicast
enabled for loader to work. Set them in all cases to ensure this is true.
This allows the Cavium ThunderX 2s in the netperf cluster to netboot using
a USB NIC.
PR: 221001
Reviewed by: emaste, tsoome
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D11732
flowtable anymore (as flowtable was never considered to be useful in
the forwarding path).
Reviewed by: np
Differential Revision: https://reviews.freebsd.org/D11448
Previously we excluded riscv from make universe / tinderbox if the
required xtoolchain package was not installed. Make that logic generic
so that we can loop over multiple architectures, in preparation to test
patches to have other architectures rely on external toolchain.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D11652
Kernel already used the stronger barrier instruction for AMDs, correct
the userspace fast gettimeofday() implementation as well.
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D11728
The attached patch lets adaasync() set ADA_STATE_WCACHE based on
ADA_FLAG_CAN_WCACHE instead of ADA_FLAG_CAN_RAHEAD.
This fixes a regression introduced in r300207 which changed
the flag names.
PR: 220948
Submitted by: Fabian Keil <fk@fabiankeil.de>
Obtained from: ElectroBSD
MFC after: 1 week
Reduce the use of local copies of switch register data.
The switch now works with the upstream dsa node (i.e. the upstream DTS).
Tested on: ClearFog Pro (88E6176), SG-3100 (88E6141)
Sponsored by: Rubicon Communications, LLC (Netgate)
for embedded slots. Fail in the sdhci(4) initialization for slot type
shared, which is completely unsupported by this driver at the moment. [1]
For Intel eMMC controllers, taking the embedded slot type into account
obsoltes setting SDHCI_QUIRK_ALL_SLOTS_NON_REMOVABLE so remove these quirk
entries.
- Hide the 1.8 V VDD capability when the slot is detected as non-embedded,
as the SDHCI specification explicitly states that 1.8 V VDD is applicable
to embedded slots only. [2]
- Define some easy bits of the SDHCI specification v4.20. [3]
- Don't leak bus_dma(9) resources in failure paths of sdhci_init_slot().
Obtained from: DragonFlyBSD 65704a46 [1], 7ba10b88 [2], 0df14648 [3]
r307901 was reverted in r321480, restoring an incorrect block
delimitation bug present in the original cc_cubic commit. Restore
only the bugfix (brace addition) from r307901.
CID: 1090182
Approved by: sbruno
Usually it is sufficient to use iicbus_transfer_excl(), or one of the
higher-level convenience functions that use it, to reserve the bus for the
duration of each register access. Occasionally it is important that a
series of accesses or read-modify-write operations must be done without any
other intervening access to the device, to prevent corrupting state.
Without support for nested request/release, slave device drivers would have
to stop using high-level convenience functions and resort to working with
arrays of iic_msg structs just for a few operations (often involving
one-time device setup or infrequent configuration changes).
The changes here appear large from a glance at the diff, but in fact they're
nearly trivial, and the large diff is because of changes in indentation and
the re-wrapping of comments caused by that. One notable change is that
iicbus_release_bus() now ignores the IICBUS_CALLBACK(IIC_RELEASE_BUS) return
value. The old error handling left the bus in a kind of limbo state where
it was still owned at the iicbus layer, but drivers rarely check the return
of the release call, and it's unclear what they would do to recover from an
error return anyway. No existing low-level drivers return any kind of error
from IIC_RELEASE_BUS except one EINVAL for "you don't own the bus", to which
the right response is probably to carry on with the process of releasing the
reference to the bus anyway.
on i2c devices, where the "register" can be any length.
Many (perhaps most) common i2c devices are organized as a collection of
(usually 1-byte-wide) registers, and are accessed by first writing a 1-byte
register index/offset number, then by reading or writing the data.
Generally there is an auto-increment feature so the when multiple bytes
are read or written, multiple contiguous registers are accessed.
Most existing slave device drivers allocate an array of iic_msg structures,
fill in all the transfer info, and invoke iicbus_transfer(). These new
functions commonize all that and reduce register access to a simple call
with a few arguments.
Suppose that a file on NFS has partially filled last page, and this
page is dirty. NFS VOP_PAGEOUT() method only marks the the page clean
up to the block of the last written byte, leaving other blocks dirty.
Also any page which erronously exists in the vnode vm_object past EOF
is also left marked as dirty.
With the introduction of the buf-cache coherent pager, each pass of
syncer over the object with such page results in creation of B_DELWRI
buffer due to VOP_WRITE() call. This buffer is noted on next syncer
pass, which results e.g. a visible manifestation of shutdown never
finishing vnode sync. Note that before buf-cache coherency commit, a
dirty page might left never synced to server if a partial writes
occur.
Fix this by clearing dirty bits after EOF. Only blocks of the partial
page which are completely after EOF are marked clean, to avoid
possible user data loss.
Reported by: mav
Reviewed by: alc, markj
Tested by: mav, pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D11697
