Commit Graph

352 Commits

Author SHA1 Message Date
Josh Paetzel
f9b897ba2e Hook up mkulzma to the build.
MFC after:	3 days
2012-05-24 16:11:51 +00:00
Gabor Kovesdan
85d7de106c - Hook up BSD sort to the build. By default, it will be installed as
"bsdsort" and GNU sort will be the default "sort".  When WITH_BSD_SORT
  is set, BSD sort will be the default "sort" and GNU sort will be installed
  as "gnusort".
2012-05-11 12:47:21 +00:00
Jeremie Le Hen
6486b015fc Import stdbuf(1) and the shared library it relies on.
This tool changes the default buffering behaviour of standard
stdio streams.

It only works on dynamic binaries.  To make it work for static
ones it would require cluttering stdio because there no single
entry point.

PR:		166660
Reviewed by:	current@, jhb
Approved by:	kib (mentor)
MFC after:	1 week
2012-04-28 20:52:20 +00:00
Stanislav Sedov
0e46933c08 - Do not build libcom_err and compile_et when kerberos is disabled. They
depends on several heimdal libraries and not used by anything but kerberos
  tools.
2012-03-23 03:16:35 +00:00
Ed Schouten
f9d9bcd45e Remove wtmpcvt(1).
The wtmpcvt(1) utility converts wtmp files to the new format used by
utmpx(3). Now that HEAD has been branched to stable/9 and 9.0 is
released, there is no need for it in HEAD.

MFC after:	never
2012-01-13 15:40:49 +00:00
Kenneth D. Merry
130f4520cb Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003.  It has been shipping in
Copan (now SGI) products since 2005.

It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license.  The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.

Some CTL features:

 - Disk and processor device emulation.
 - Tagged queueing
 - SCSI task attribute support (ordered, head of queue, simple tags)
 - SCSI implicit command ordering support.  (e.g. if a read follows a mode
   select, the read will be blocked until the mode select completes.)
 - Full task management support (abort, LUN reset, target reset, etc.)
 - Support for multiple ports
 - Support for multiple simultaneous initiators
 - Support for multiple simultaneous backing stores
 - Persistent reservation support
 - Mode sense/select support
 - Error injection support
 - High Availability support (1)
 - All I/O handled in-kernel, no userland context switch overhead.

(1) HA Support is just an API stub, and needs much more to be fully
    functional.

ctl.c:			The core of CTL.  Command handlers and processing,
			character driver, and HA support are here.

ctl.h:			Basic function declarations and data structures.

ctl_backend.c,
ctl_backend.h:		The basic CTL backend API.

ctl_backend_block.c,
ctl_backend_block.h:	The block and file backend.  This allows for using
			a disk or a file as the backing store for a LUN.
			Multiple threads are started to do I/O to the
			backing device, primarily because the VFS API
			requires that to get any concurrency.

ctl_backend_ramdisk.c:	A "fake" ramdisk backend.  It only allocates a
			small amount of memory to act as a source and sink
			for reads and writes from an initiator.  Therefore
			it cannot be used for any real data, but it can be
			used to test for throughput.  It can also be used
			to test initiators' support for extremely large LUNs.

ctl_cmd_table.c:	This is a table with all 256 possible SCSI opcodes,
			and command handler functions defined for supported
			opcodes.

ctl_debug.h:		Debugging support.

ctl_error.c,
ctl_error.h:		CTL-specific wrappers around the CAM sense building
			functions.

ctl_frontend.c,
ctl_frontend.h:		These files define the basic CTL frontend port API.

ctl_frontend_cam_sim.c:	This is a CTL frontend port that is also a CAM SIM.
			This frontend allows for using CTL without any
			target-capable hardware.  So any LUNs you create in
			CTL are visible in CAM via this port.

ctl_frontend_internal.c,
ctl_frontend_internal.h:
			This is a frontend port written for Copan to do
			some system-specific tasks that required sending
			commands into CTL from inside the kernel.  This
			isn't entirely relevant to FreeBSD in general,
			but can perhaps be repurposed.

ctl_ha.h:		This is a stubbed-out High Availability API.  Much
			more is needed for full HA support.  See the
			comments in the header and the description of what
			is needed in the README.ctl.txt file for more
			details.

ctl_io.h:		This defines most of the core CTL I/O structures.
			union ctl_io is conceptually very similar to CAM's
			union ccb.

ctl_ioctl.h:		This defines all ioctls available through the CTL
			character device, and the data structures needed
			for those ioctls.

ctl_mem_pool.c,
ctl_mem_pool.h:		Generic memory pool implementation used by the
			internal frontend.

ctl_private.h:		Private data structres (e.g. CTL softc) and
			function prototypes.  This also includes the SCSI
			vendor and product names used by CTL.

ctl_scsi_all.c,
ctl_scsi_all.h:		CTL wrappers around CAM sense printing functions.

ctl_ser_table.c:	Command serialization table.  This defines what
			happens when one type of command is followed by
			another type of command.

ctl_util.c,
ctl_util.h:		CTL utility functions, primarily designed to be
			used from userland.  See ctladm for the primary
			consumer of these functions.  These include CDB
			building functions.

scsi_ctl.c:		CAM target peripheral driver and CTL frontend port.
			This is the path into CTL for commands from
			target-capable hardware/SIMs.

README.ctl.txt:		CTL code features, roadmap, to-do list.

usr.sbin/Makefile:	Add ctladm.

ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c:		ctladm(8) is the CTL management utility.
			It fills a role similar to camcontrol(8).
			It allow configuring LUNs, issuing commands,
			injecting errors and various other control
			functions.

usr.bin/Makefile:	Add ctlstat.

ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c:	ctlstat(8) fills a role similar to iostat(8).
			It reports I/O statistics for CTL.

sys/conf/files:		Add CTL files.

sys/conf/NOTES:		Add device ctl.

sys/cam/scsi_all.h:	To conform to more recent specs, the inquiry CDB
			length field is now 2 bytes long.

			Add several mode page definitions for CTL.

sys/cam/scsi_all.c:	Handle the new 2 byte inquiry length.

sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c:	Update for 2 byte inquiry length field.

scsi_da.h:		Add versions of the format and rigid disk pages
			that are in a more reasonable format for CTL.

amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC:	Add device ctl.

i386/conf/PAE:		The CTL frontend SIM at least does not compile
			cleanly on PAE.

Sponsored by:	Copan Systems, SGI and Spectra Logic
MFC after:	1 month
2012-01-12 00:34:33 +00:00
Marius Strobl
78dbe84377 On FreeBSD just use the MD5 implementation of libmd rather than that of
libcrypto so we don't need to relinquish csup when world is built without
OpenSSL.
2011-12-24 12:16:38 +00:00
Ed Schouten
9f0c9022c2 Add WITHOUT_UTMPX switch to the build system.
This knob removes the tools that are exclusively used to view and
maintain the databases maintained by utmpx, namely last, users, who,
wtmpcvt, ac, lastlogin and utxrm.

The tool w is not in this list, because it has some other functionality
which is unrelated to utmpx; it is hardlinked to the uptime tool.
2011-06-17 21:30:21 +00:00
David E. O'Brien
a23d1c70b3 Build and install a BSD licensed grep.
If WITH_BSD_GREP is not set, it will be 'bsdgrep' and GNUgrep will be
'[ef]grep'.  Otherwise, BSD-grep will be the grep family, and GNUgrep
will be 'gnugrep'.

Discussed with: brooks
2011-05-25 01:04:12 +00:00
Edward Tomasz Napierala
6ec54a57b4 Add rctl(8), the utility to manage rctl rules.
Sponsored by:	The FreeBSD Foundation
Reviewed by:	kib (earlier version)
2011-03-30 18:27:52 +00:00
Gabor Kovesdan
ad30f8e79b Add the BSD-licensed Citrus iconv to the base system with default off
setting. It can be built by setting the WITH_ICONV knob. While this
knob is unset, the library part, the binaries, the header file and
the metadata files will not be built or installed so it makes no impact
on the system if left turned off.

This work is based on the iconv implementation in NetBSD but a great
number of improvements and feature additions have been included:

- Some utilities have been added. There is a conversion table generator,
  which can compare conversion tables to reference data generated by
  GNU libiconv. This helps ensuring conversion compatibility.
- UTF-16 surrogate support and some endianness issues have been fixed.
- The rather chaotic Makefiles to build metadata have been refactored
  and cleaned up, now it is easy to read and it is also easier to add
  support for new encodings.
- A bunch of new encodings and encoding aliases have been added.
- Support for 1->2, 1->3 and 1->4 mappings, which is needed for
  transliterating with flying accents as GNU does, like "u.
- Lots of warnings have been fixed, the major part of the code is
  now WARNS=6 clean.
- New section 1 and section 5 manual pages have been added.
- Some GNU-specific calls have been implemented:
  iconvlist(), iconvctl(), iconv_canonicalize(), iconv_open_into()
- Support for GNU's //IGNORE suffix has been added.
- The "-" argument for stdin is now recognized in iconv(1) as per POSIX.
- The Big5 conversion module has been fixed.
- The iconv.h header files is supposed to be compatible with the
  GNU version, i.e. sources should build with base iconv.h and
  GNU libiconv. It also includes a macro magic to deal with the
  char ** and const char ** incompatibility.
- GNU compatibility: "" or "char" means the current local
  encoding in use
- Various cleanups and style(9) fixes.

Approved by:	delphij (mentor)
Obtained from:	The NetBSD Project
Sponsored by:	Google Summer of Code 2009
2011-02-25 00:04:39 +00:00
Ulrich Spörlein
423102c6fa Flesh out WITHOUT_GROFF support to DTRT.
A full featured groff is required during buildworld, so build it always
and don't rely on it being present on the host system.

vgrind(1) is tightly coupled to a roff processor and will not be
built/installed when groff is disabled. Also much of the roff'ed
documentation under share/doc will not be built/installed when
WITHOUT_GROFF is defined.

Reviewed by:	ru (partial)
2011-02-22 08:13:49 +00:00
Gordon Tetlow
023f0373a1 Retire GNU man in favor of the newly written BSDL version.
Approved by:	wes (mentor)
2010-10-03 22:24:14 +00:00
Warner Losh
8cfc82586e Move to using Makefile.arch to include the proper target-specific programs. 2010-09-13 15:30:09 +00:00
Gabor Kovesdan
6608cc579e - Change default grep back to GNU version. BSD grep can be built with the
WITH_BSD_GREP knob.
- Bump __FreeBSD_version

Requested by:   dougb
Approved by:    delphij (mentor)
2010-08-23 10:04:26 +00:00
Xin LI
65a13e8549 Update a stale comment about grep. 2010-08-11 18:23:26 +00:00
Gabor Kovesdan
4dc88ebedf Add BSD grep to the base system and make it our default grep.
Deliverables: Small and clean code (1,4 KSLOC vs GNU's 8,5 KSLOC),
              lower memory usage than GNU grep, GNU compatibility,
              BSD license.

TODO:         Performance is somewhat behind GNU grep but it is only
              significant for bigger searches.  The reason is complex, the
              most important factor is that GNU grep uses lots of
              optimizations to improve the speed of the regex library.
              First, we need a modern regex library (practically by adopting
              TRE), add support for GNU-style non-standard regexes and then
              reevalute the performance issues and look for bottlenecks.  In
              the meantime, for those, who need better performance, it is
              possible to build GNU grep by setting WITH_GNU_GREP.

Approved by:            delphij (mentor)
Obtained from:          OpenBSD (http://www.openbsd.org/cgi-bin/cvsweb/src/usr.bin/grep/),
                        freegrep (http://github.com/howardjp/freegrep)
Sponsored by:           Google SoC 2008
Portbuild tests run by: kris, pav, erwin
Acknowledgements to:    fjoe (as SoC 2008 mentor),
                        everyone who helped in reviewing and testing
2010-07-22 19:11:57 +00:00
Roman Divacky
6513cfc82f Hook clang into the build on i386/amd64/powerpc.
Approved by:	ed (mentor)
2010-06-09 19:57:20 +00:00
Jung-uk Kim
07e547fe26 Add a new build option, MAN_UTILS. This option lets you control building
utilities and related support files for manual pages, which were previously
controlled by MAN.  For POLA, the default depends on MAN, i.e., WITHOUT_MAN
implies WITHOUT_MAN_UTILS and WITH_MAN implies WITH_MAN_UTILS.  This patch
is slightly improved by me from:

PR:		misc/145212
2010-05-19 23:56:26 +00:00
Martin Matuska
81ad83880d Import of liblzma, xz, xzdec, lzmainfo from vendor branch
Add support for xz and lzma to lesspipe.sh (xzless, lzless)
Bump __FreeBSD_version

Approved by:	delphij (mentor)
MFC after:	2 weeks
2010-05-10 06:59:50 +00:00
Xin LI
208987a53c Add seq(1), a small utility to generate sequence number.
Obtained from:	NetBSD
MFC after:	3 months
2010-02-19 23:54:12 +00:00
Warner Losh
35873dcedb bc and dc are not BSD version, not GNU version. 2010-02-18 05:14:36 +00:00
Xin LI
07ea9a7c2f As it turns out, fmt(1) is being used by the base system as well as the
ports tree extensively and it is probably a good idea to keep it
regardless of NO_MAIL setting.

Reported by:	Alexander Best
Reviewed by:	antoine
X-MFC-With:	r203584
2010-02-09 18:22:26 +00:00
Pyun YongHyeon
69618fcf1f Connect smbfs related libraries and tool on sparc64.
Reviewed by:	marius
2010-01-25 18:52:47 +00:00
Antoine Brodin
f50eacd5e2 Unbreak world WITHOUT_OPENSSL:
the new dc(1) depends on crypto(3) and bc(1) depends on dc(1).
2010-01-23 17:31:13 +00:00
Gabor Kovesdan
fdf1f88bce Replace GNU bc/dc with BSDL versions ported from OpenBSD. They have a good
compatibility level with the GNU counterparts and have shown to be mature
enough. For now, the GNU versions aren't removed from the tree, just detached
from the build.

Sponsored by:		Google Summer of Code 2008
Portbuild run by:	erwin
Approved by:		delphij
2010-01-20 21:30:52 +00:00
Ed Schouten
5ab7f1fc40 Add wtmpcvt(1).
This utility allows users to convert their wtmp databases to the new
format. It makes no sense for users to keep their wtmp log files if they
are unable to view them.

It basically copies ut_line into ut_id as well. This makes it possible
for last(1) and ac(8) to match login records with their corresponding
logout record.
2010-01-14 20:58:45 +00:00
Roman Divacky
4c0191c569 Connect unzip to the build.
Approved by:	ed (mentor)
Approved by:	des (unzip author)
Tested by:	exp ports build (miwi)
2009-12-03 18:02:55 +00:00
Ed Schouten
7c7cef7278 Add revoke(1).
While hacking on TTY code, I often miss a small utility to revoke my own
(pseudo-)terminals. This small utility is just a small wrapper around
the revoke(2) call, so you can destroy your very own login sessions.

Approved by:	re
2009-06-15 21:52:27 +00:00
Ed Schouten
89f98d57d6 Remove window(1) from the base system.
Some time ago Tom Rhodes sent me an email that he was willing to perform
various cleanups to the window(1) source code. After some discussion, we
both decided the best thing to do, was to move window(1) to the ports
tree. The application isn't used a lot nowadays, mainly because it has
been superseeded by screen, tmux, etc.

A couple of hours ago Tom committed window(1) to ports (misc/window), so
I'm removing it from the tree. I don't think people will really miss it,
but I'm describing the change in UPDATING anyway.

Discussed with:	trhodes, pav, kib
Approved by:	re
2009-06-02 13:44:36 +00:00
George V. Neville-Neil
9a3009b800 Add a new program, perror, which takes an errno as a command line argument
and outputs the associated textual message in the same way that
perror(3) would if called within a program.
2009-05-19 17:40:22 +00:00
Warner Losh
970a16678b Truss builds on mips, so don't filter it building there anymore. 2009-02-15 01:32:50 +00:00
Marius Strobl
69e01db9cb Add back ar(1) which was accidentally decoupled in r183242.
Approved by:	sam
2008-09-24 20:41:35 +00:00
Sam Leffler
690f477d75 add new build knobs and jigger some existing controls to improve
control over the result of buildworld and installworld; this especially
helps packaging systems such as nanobsd

Reviewed by:	various (posted to arch)
MFC after:	1 month
2008-09-21 22:02:26 +00:00
David E. O'Brien
47490ee583 Add gprof MIPS MD header and enable building gprof.
Obtained from:	Juniper Networks
2008-09-02 15:35:47 +00:00
David E. O'Brien
668dbd57c1 Truss and gprof doesn't build for MIPS. 2008-09-01 18:03:09 +00:00
Yaroslav Tykhiy
21be3b3183 pkill(1) first appeared in /usr/bin, but later it was moved to /bin
for the convenience of rc.d.  Now it has happily lived there for quite
a while.  So move the pkill(1) source files from usr.bin to bin, too.

Approved by:	gad
2008-08-31 14:27:59 +00:00
Doug Barton
6973701a00 1. Make the BSD version of cpio the default [1]
a. The BSD version will be built and installed unless
WITHOUT_BSD_CPIO is defined.
b. The GNU version will not be built or installed unless
WITH_GNU_CPIO is defined. If this is defined, the symlink
in /usr/bin will be to the GNU version whether the BSD
version is present or not.

When these changes are MFCed the defaults should be flipped.

2. Add a knob to disable the building of GNU grep. This will
make it easier for those that want to test the BSD version in
the ports.

Approved by:	kientzle [1]
2008-06-16 05:48:15 +00:00
Tim Kientzle
cb7a20f2ba Connect bsdcpio up to the build.
Starting now, there are two cpio programs in the base system:
  /usr/bin/gcpio  - GNU cpio
  /usr/bin/bsdcpio - bsdcpio

In addition, there is a symlink:
  /usr/bin/cpio -> /usr/bin/gcpio (default)
  /usr/bin/cpio -> /usr/bin/bsdcpio (WITH_BSDCPIO)

In particular, WITH_BSDCPIO only controls the
symlink; bsdcpio is always built regardless.

Unless there are objections or problems, I intend:
  * to make /usr/bin/bsdcpio available in 7.1
  * to have /usr/bin/cpio default to bsdcpio in 8.0
    (WITH_GCPIO will be an option instead of WITH_BSDCPIO)
  * to leave /usr/bin/gcpio in the tree until 9.0
2008-05-26 19:19:58 +00:00
Ruslan Ermilov
dbdb679c6f Remove options MK_LIBKSE and DEFAULT_THREAD_LIB now that we no longer
build libkse.  This should fix WITHOUT_LIBTHR builds as a side effect.
2008-03-29 17:44:40 +00:00
David E. O'Brien
8757b00e1e uuidgen has been repo-copied from usr.bin/ to bin/ to match its "new"
(2007/04/09) installation location.
2008-03-13 17:38:06 +00:00
Jeff Roberson
bc72ba9cca - Add cpuset to the build.
Sponsored by:	Nokia
2008-03-02 07:52:26 +00:00
Ruslan Ermilov
da9b9cd9dc Hide BSD ar(1) under the MK_TOOLCHAIN option.
Reviewed by:	obrien
2008-02-22 09:31:23 +00:00
David E. O'Brien
a856b6c56c Re-introduce the new BSDLed 'ar' to the build.
It is installed as "bsdar" unless WANT_BSDAR is defined.

Discussed with: kaiw
2008-02-22 06:47:45 +00:00
Kai Wang
7a76718800 Back out previous commit. Restore Binutils ar as default. Disconnect
'BSD' ar to the build.

Requested by: 	des
2008-02-21 16:12:46 +00:00
Kai Wang
d0e2abaf12 * Connect ar(1) to the build and make it default ar. Rename GNU
binutils ar and ranlib to gar and granlib, respectively.

* Introduce a temporary variable WITH_GNUAR as a safety net.
When buildworld with -DWITH_GNUAR, GNU binutils ar and ranlib
will install as default ones and 'BSD' ar will be disabled.

* Bump __FreeBSD_version to reflect the import of 'BSD' ar(1).

Approved by:		 jkoshy (mentor)
2008-02-21 11:21:29 +00:00
Ruslan Ermilov
a2854cdf20 Fix disorder introduced in previous commit. 2007-12-20 16:40:25 +00:00
Poul-Henning Kamp
8f2c52e6fb Pull ministat into the installed system and write it a man-page.
(Repocopied from src/tools/tools/ministat)
2007-12-20 10:17:07 +00:00
Robert Watson
b59f38b57c Connect procstat(1) to the build. 2007-12-02 23:32:03 +00:00
David E. O'Brien
946367b8e2 Tweak the handling of "WITHOUT_LIBPTHREAD". Also remove the accidental
treatment of 'LIBKSE' as an "old style" knob.

Submitted by:	ru
Approved by:	re(kensmith)
2007-10-09 23:31:11 +00:00