thicket of .if ${COMPILER_TYPE} == "clang" that controls
warnings. Also, use CFLAGS.clang in a couple places in preference to
having a similar construct that's related to the CWARNFLAGS changes.
and finish the job. ncurses is now the only Makefile in the tree that
uses it since it wasn't a simple mechanical change, and will be
addressed in a future commit.
This is largely the work from the projects/uefi branch, with some
additional refinements. This is derived from (and replaces) the
original i386 efi implementation; i386 support will be restored later.
Specific revisions of note from projects/uefi:
r247380:
Adjust our load device when we boot from CD under UEFI.
The process for booting from a CD under UEFI involves adding a FAT
filesystem containing your loader code as an El Torito boot image.
When UEFI detects this, it provides a block IO instance that points at
the FAT filesystem as a child of the device that represents the CD
itself. The problem being that the CD device is flagged as a "raw
device" while the boot image is flagged as a "logical partition". The
existing EFI partition code only looks for logical partitions and so
the CD filesystem was rendered invisible.
To fix this, check the type of each block IO device. If it's found to
be a CD, and thus an El Torito boot image, look up its parent device
and add that instead so that the loader will then load the kernel from
the CD filesystem. This is done by using the handle for the boot
filesystem as an alias.
Something similar to this will be required for booting from other
media as well as the loader will live in the EFI system partition, not
on the partition containing the kernel.
r246231:
Add necessary code to hand off from loader to an amd64 kernel.
r246335:
Grab the EFI memory map and store it as module metadata on the kernel.
This is the same approach used to provide the BIOS SMAP to the kernel.
r246336:
Pass the ACPI table metadata via hints so the kernel ACPI code can
find them.
r246608:
Rework copy routines to ensure we always use memory allocated via EFI.
The previous code assumed it could copy wherever it liked. This is not
the case. The approach taken by this code is pretty ham-fisted in that
it simply allocates a large (32MB) buffer area and stages into that,
then copies the whole area into place when it's time to execute. A more
elegant solution could be used but this works for now.
r247214:
Fix a number of problems preventing proper handover to the kernel.
There were two issues at play here. Firstly, there was nothing
preventing UEFI from placing the loader code above 1GB in RAM. This
meant that when we switched in the page tables the kernel expects to
be running on, we are suddenly unmapped and things no longer work. We
solve this by making our trampoline code not dependent on being at any
given position and simply copying it to a "safe" location before
calling it.
Secondly, UEFI could allocate our stack wherever it wants. As it
happened on my PC, that was right where I was copying the kernel to.
This did not cause happiness. The solution to this was to also switch
to a temporary stack in a safe location before performing the final
copy of the loaded kernel.
r246231:
Add necessary code to hand off from loader to an amd64 kernel.
r246335:
Grab the EFI memory map and store it as module metadata on the kernel.
This is the same approach used to provide the BIOS SMAP to the kernel.
r246336:
Pass the ACPI table metadata via hints so the kernel ACPI code can
find them.
r246608:
Rework copy routines to ensure we always use memory allocated via EFI.
The previous code assumed it could copy wherever it liked. This is not
the case. The approach taken by this code is pretty ham-fisted in that
it simply allocates a large (32MB) buffer area and stages into that,
then copies the whole area into place when it's time to execute. A more
elegant solution could be used but this works for now.
r247214:
Fix a number of problems preventing proper handover to the kernel.
There were two issues at play here. Firstly, there was nothing
preventing UEFI from placing the loader code above 1GB in RAM. This
meant that when we switched in the page tables the kernel expects to
be running on, we are suddenly unmapped and things no longer work. We
solve this by making our trampoline code not dependent on being at any
given position and simply copying it to a "safe" location before
calling it.
Secondly, UEFI could allocate our stack wherever it wants. As it
happened on my PC, that was right where I was copying the kernel to.
This did not cause happiness. The solution to this was to also switch
to a temporary stack in a safe location before performing the final
copy of the loaded kernel.
r247216:
Use the UEFI Graphics Output Protocol to get the parameters of the
framebuffer.
Sponsored by: The FreeBSD Foundation
The 32-bit bootloaders on amd64 now use the 32-bit version in ficl32,
as is done with libstand32. The native 64-bit ficl will be used by the
upcoming UEFI loader.
Sponsored by: The FreeBSD Foundation
A 32-bit libstand is needed on 64-bit platforms for use by various
bootloaders. Previously only the 32-bit version was built, installed as
/usr/lib/libstand.a.
A new 64-bit libstand consumer will arrive in the near future, so move
the bootloader-specific 32-bit version to sys/boot/libstand32/.
Explicitly link against this version in the 32-bit loaders.
Sponsored by: The FreeBSD Foundation
Hetzel <swhetzel@gmail.com> on the -doc mailing list.
Also modify the Author section to be clear that I wrote the man page,
not gptboot.
MFC after: 3 days
directly to the linker (LD_FLAGS) from flags passed indirectly, via the
compiler driver (LDFLAGS).
This is because several Makefiles under sys/boot/i386 and sys/boot/pc98
use ${LD} directly to link, and the normal LDFLAGS value should not be
used in these cases.
MFC after: 3 days
shifts into the sign bit. Instead use (1U << 31) which gets the
expected result.
This fix is not ideal as it assumes a 32 bit int, but does fix the issue
for most cases.
A similar change was made in OpenBSD.
Discussed with: -arch, rdivacky
Reviewed by: cperciva
conditionally include (but ignore failures) /boot/loader.rc.local and
/boot/menu.rc.local -- to make customizing the menu easier.
Reviewed by: alfred
Discussed on: -hackers
kernel selection menu to the beastie menu. List of kernels is taken from
`kernels' in loader.conf(5) as a space (or comma) separated list of names
to display (up to 9). If not set, default value is "kernel kernel.old".
Does not validate that kernels exist because the next enhancement will be
to allow selection of the root device.
Discussed on: -current
MFC after: 3 days
protected mode and may leave protected-mode-specific flags like PSL_NT set
when they return to real mode. This can cause a fault when BTX re-enters
protected mode after the BIOS mode returns.
PR: amd64/182740
Reported by: Julian Pidancet <julian.pidancet@gmail.com>
Approved by: re (gjb)
MFC after: 1 week
WITH[OUT]_SSP to avoid hitting an error if user has WITH_SSP in their
make.conf. Ports now use this knob.
make[7]: "/usr/src/share/mk/bsd.own.mk" line 466: WITH_SSP and
WITHOUT_SSP can't both be set.
This is similar to previous cleanup done in r188895
Approved by: bapt
Reviewed by: jlh (earlier version)
Approved by: re (marius)
MFC after: 1 week
in gpart(8) and boot(8), adding references to gptboot(8) in both.
Reviewed by: jhb, ae, pjd, Paul Schenkeveld <bsdcan@psconsult.nl>, david_a_bright@dell.com (portions), gjb
MFC after: 1 week
GDT from the correct segment, otherwise a triple fault would be caused.
In some virtual environments (VMware, VirtualBox, etc) this could lead
to a unhandled error or hang in the guest emulation software.
Thanks to avg and jhb for a few hints in the right direction.
Noticed by: Jeremy Chadwick <jdc@koitsu.org> (and many others)
MFC after: 1 week
comconsole setup. Previously the hint would be set when if you set a
custom port, but it would not be updated if you later set a custom speed.
Also, leave the hw.uart.console hint mutable so it can be overridden or
unset by the user if needed.
Reviewed by: kib (earlier version)
MFC after: 1 week
gcc handles -symbolic by passing -Bsymbolic through to ld. clang ignores
-symbolic and thus invokes ld without -Bsymbolic which leads to some symbols
not being properly linked in loader.efi. Fix this by using -Wl,-Bsymbolic which
passes -Bsymbolic to ld in both the gcc and clang cases.
Approved by: rpaulo
The sole purpose of this change is to make sure that sizeof produces
"canonical" sizes for these structures. This is to avoid triggering
bugs in the BIOSes that properly handle only the canonical values of
input length provided to INT 13h AH=48h.
The canonical sizes are: 30 for v2, 66 for v3, etc.
Buggy BIOS code probably looks like:
if (input_length > 30) { /* > v2 */
assume that input length is 66 /* assume v3 or later */
}
This should fix boot problems at least on Supermicro X8DT6 and possibly
on P410i Smart Array Controller (as found in e.g. HP DL360 G7).
Reported by: gnn, np, rstone
Debugged by: rstone
Discussed with: ae, np, rstone
MFC after: 4 days
sio.S. This is not particularly needed for head right now, but it is
intended to merge to stable/9, to fix boot2 build with clang there.
Reviewed by: avg
MFC after: 3 days
.. so that consistent compilation algorithms are used for both
architectures as in practice the binaries are expected to be
interchangeable (for time being).
Previously i386 used default setting which were equivalent to
-march=i486 -mtune=generic.
The only difference is using smaller but slower "leave" instructions.
Discussed with: jhb, dim
MFC after: 29 days
- clear capability flags when hw timeouts
- retire comc_started status variable and directly use c_flags to see
if comconsole is selected for use
Reviewed by: jhb
Tested by: Uffe Jakobsen <uffe@uffe.org>,
Olivier Cochard-Labbe <olivier@cochard.me>
MFC after: 26 days
The first discovered pool, whether it covers the whole boot disk or not,
is going to be first in zfs_pools list. So there is no need at all
for spapp parameter.
This commit also fixes a bug where NULL would be assigned to NULL
pointer when probe_drive was called with the spapp parameter of NULL.
MFC after: 21 days
disk_open(). Very often this is called several times for one file.
This leads to reading partition table metadata for each call. To
reduce the number of disk I/O we have a simple block cache, but it
is very dumb and more than half of I/O operations related to reading
metadata, misses this cache.
Introduce new cache layer to resolve this problem. It is independent
and doesn't need initialization like bcache, and will work by default
for all loaders which use the new DISK API. A successful disk_open()
call to each new disk or partition produces new entry in the cache.
Even more, when disk was already open, now opening of any nested
partitions does not require reading top level partition table.
So, if without this cache, partition table metadata was read around
20-50 times during boot, now it reads only once. This affects the booting
from GPT and MBR from the UFS.
Use of __builtin_constant_p in a function that is only called via
a pointer is a good example of how out-of-date it was.
Suggested by: bde
MFC after: 1 week
