Simply said, WDAT is an abstraction for the real WDT hardware. For
instance, to add a newer generation WDT to ichwd(4), one must know the
detailed hardware registers, etc..
With WDAT, the necessary IO accesses to operate the WDT are comprehensively
described in it and no hardware knowledge is required.
With this driver, the WDT on Advantech ARK-1124C, Dell R210 and Dell R240 are
detected and operated flawlessly.
* While R210 is also supported by ichwd(4), others are not supported yet.
The unfortunate thing is that not all systems have WDAT defined.
Submitted by: t_uemura at macome.co.jp
Reviewed by: hrs
Differential Revision: https://reviews.freebsd.org/D37493
Sync serial (e.g. T1/T1/G.703) interfaces are obsolete, this driver
includes obfuscated source, and has reported potential security issues.
Differential Revision: https://reviews.freebsd.org/D33467
Prior to this commit, the TSC and local APIC frequencies were calibrated
at boot time by measuring the clocks before and after a one-second sleep.
This was simple and effective, but had the disadvantage of *requiring a
one-second sleep*.
Rather than making two clock measurements (before and after sleeping) we
now perform many measurements; and rather than simply subtracting the
starting count from the ending count, we calculate a best-fit regression
between the target clock and the reference clock (for which the current
best available timecounter is used). While we do this, we keep track
of an estimate of the uncertainty in the regression slope (aka. the ratio
of clock speeds), and stop measuring when we believe the uncertainty is
less than 1 PPM.
In order to avoid the risk of aliasing resulting from the data-gathering
loop synchronizing with (a multiple of) the frequency of the reference
clock, we add some additional spinning depending upon the iteration number.
For numerical stability and simplicity of implementation, we make use of
floating-point arithmetic for the statistical calculations.
On the author's Dell laptop, this reduces the time spent in calibration
from 2000 ms to 29 ms; on an EC2 c5.xlarge instance, it is reduced from
2000 ms to 2.5 ms.
Reviewed by: bde (previous version), kib
MFC after: 1 month
Sponsored by: https://www.patreon.com/cperciva
Differential Revision: https://reviews.freebsd.org/D33802
in_cksum() and related routines are implemented separately for each
platform, but only i386 and arm have optimized versions. Other
platforms' copies of in_cksum.c are identical except for style
differences and support for big-endian CPUs.
Deduplicate the implementations for the rest of the platforms. This
will make it easier to implement in_cksum() for unmapped mbufs. On arm
and i386, define HAVE_MD_IN_CKSUM to mean that the MI implementation is
not to be compiled.
No functional change intended.
Reviewed by: kp, glebius
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33095
AES-CBC OpenSSL assembly is used underneath.
The glue layer(ossl_aes.c) is based on CHACHA20 implementation.
Contrary to the SHA and CHACHA20, AES OpenSSL assembly logic
does not have a fallback implementation in case CPU doesn't
support required instructions.
Because of that CPU caps are checked during initialization and AES
support is advertised only if available.
The feature is available on all architectures that ossl supports:
i386, amd64, arm64.
The biggest advantage of this patch over existing solutions
(aesni(4) and armv8crypto(4)) is that it supports SHA,
allowing for ETA operations.
Sponsored by: Stormshield
Obtained from: Semihalf
Reviewed by: jhb (previous version)
Differential revision: https://reviews.freebsd.org/D32099
AES-CBC OpenSSL assembly is used underneath.
The glue layer(ossl_aes.c) is based on CHACHA20 implementation.
Contrary to the SHA and CHACHA20, AES OpenSSL assembly logic
does not have a fallback implementation in case CPU doesn't
support required instructions.
Because of that CPU caps are checked during initialization and AES
support is advertised only if available.
The feature is available on all architectures that ossl supports:
i386, amd64, arm64.
The biggest advantage of this patch over existing solutions
(aesni(4) and armv8crypto(4)) is that it supports SHA,
allowing for ETA operations.
Sponsored by: Stormshield
Obtained from: Semihalf
Reviewed by: jhb
Differential revision: https://reviews.freebsd.org/D32099
The last two drivers that required sppp are cp(4) and ce(4).
These devices are still produced and can be purchased
at Cronyx <http://cronyx.ru/hardware/wan.html>.
Since Roman Kurakin <rik@FreeBSD.org> has quit them, they no
longer support FreeBSD officially. Later they have dropped
support for Linux drivers to. As of mid-2020 they don't even
have a developer to maintain their Windows driver. However,
their support verbally told me that they could provide aid to
a FreeBSD developer with documentaion in case if there appears
a new customer for their devices.
These drivers have a feature to not use sppp(4) and create an
interface, but instead expose the device as netgraph(4) node.
Then, you can attach ng_ppp(4) with help of ports/net/mpd5 on
top of the node and get your synchronous PPP. Alternatively
you can attach ng_frame_relay(4) or ng_cisco(4) for HDLC.
Actually, last time I used cp(4) back in 2004, using netgraph(4)
instead of sppp(4) was already the right way to do.
Thus, remove the sppp(4) related part of the drivers and enable
by default the negraph(4) part. Further maintenance of these
drivers in the tree shouldn't be a big deal.
While doing that, remove some cruft and enable cp(4) compilation
on amd64. The ce(4) for some unknown reason marks its internal
DDK functions with __attribute__ fastcall, which most likely is
safe to remove, but without hardware I'm not going to do that, so
ce(4) remains i386-only.
Reviewed by: emaste, imp, donner
Differential Revision: https://reviews.freebsd.org/D32590
See also: https://reviews.freebsd.org/D23928
also move ptrace-related helpers to ptrace_machdep.c
Apply some style. Use ANSI C function definitions.
Remove MPSAFE annotations.
Reviewed by: emaste, imp
Discussed with: jrtc27
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D32310
According to https://github.com/NuxiNL/cloudlibc:
CloudABI is no longer being maintained. It was an awesome experiment,
but it never got enough traction to be sustainable.
There is no reason to keep it in FreeBSD.
Approved by: ed (private mail)
Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D31923
The file as is is the maze of #ifdef passages, all slightly different.
Divorcing i386 and amd64 version actually makes changing the code
easier, also no changes for i386 are planned.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D31931
- Re-implement pcib interface to use standard pci bus driver on top of
vmd(4) instead of custom one.
- Re-implement memory/bus resource allocation to properly handle even
complicated configurations.
- Re-implement interrupt handling to evenly distribute children's MSI/
MSI-X interrupts between available vmd(4) MSI-X vectors and setup them
to be handled by standard OS mechanisms with minimal overhead, except
sharing when unavoidable.
Successfully tested on Dell XPS 13 laptop with Core i7-1185G7 CPU (VMD
device ID 0x9a0b) and single NVMe SSD, dual-booting with Windows 10.
Successfully tested on Supermicro X11DPI-NT motherboard with Xeon(R)
Gold 6242R CPUs (VMD device ID 0x201d), simultaneously handling NVMe
SSD on one PCIe port and PLX bridge with 3 NVMe and 1 AHCI SSDs on
another. Handles SSD hot-plug (except Optane 905p for some reason,
which are not detected until manual bus rescan) and enabled IOMMU
(directly connected SSDs work, but ones connected to the PLX fail
without errors from IOMMU).
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Differential revision: https://reviews.freebsd.org/D31762
Stop confusing people, retire COMPAT_LINUX and COMPAT_LINUX32 kernel
build options. Since we have 32 and 64 bit Linux emulators, we can't build both
emulators together into the kernel. I don't think it matters, Linux emulation
depends on loadable modules (via rc).
Cut LINPROCFS and LINSYSFS for consistency.
PR: 215061
Reviewed by: bcr (manpages), trasz
Differential Revision: https://reviews.freebsd.org/D30751
MFC after: 2 weeks
The vmbus ISR needs to live in a trampoline. Dynamically allocating a
trampoline at driver initialization time poses some difficulties due to
the fact that the KENTER macro assumes that the offset relative to
tramp_idleptd is fixed at static link time. Another problem is that
native_lapic_ipi_alloc() uses setidt(), which assumes a fixed trampoline
offset.
Rather than fight this, move the Hyper-V ISR to i386/exception.s. Add a
new HYPERV kernel option to make this optional, and configure it by
default on i386. This is sufficient to make use of vmbus(4) after the
4/4 split. Note that vmbus cannot be loaded dynamically and both the
HYPERV option and device must be configured together. I think this is
not too onerous a requirement, since vmbus(4) was previously
non-functional.
Reported by: Harry Schmalzbauer <freebsd@omnilan.de>
Tested by: Harry Schmalzbauer <freebsd@omnilan.de>
Reviewed by: whu, kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D30577
It's a class0 driver that implements some pcib methods and creates
a pci bus as its children.
The "ofw_pci" name will be used by a new driver that will be a subclass
of the pci bus.
No functional changes intended.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Reviewed by: andrew
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D30226
The C variant in libkern performs excessive branching to find the
non-zero byte instead of using the bsfq instruction. The same code
patched to use it is still slower than the routine implemented here
as the compiler keeps neglecting to perform certain optimizations
(like using leaq).
On top of that the routine can is a starting point for copyinstr
which operates on words instead of bytes.
Tested with glibc test suite.
Sample results (calls/s):
Haswell:
$(perl -e "print 'A' x 3"):
stock: 211198039
patched:338626619
asm: 465609618
$(perl -e "print 'A' x 100"):
stock: 83151997
patched: 98285919
asm: 120719888
AMD EPYC 7R32:
$(perl -e "print 'A' x 3"):
stock: 282523617
asm: 491498172
$(perl -e "print 'A' x 100"):
stock: 114857172
asm: 112082057
nids(4) was a clever idea in the early 2000's when the market was
flooded with 10/100 NICs with Windows-only drivers, but that hasn't been
the case for ages and the driver has had no meaningful maintenance in
ages. It only supports Windows-XP era drivers.
Also remove:
- ndis support from wpa_supplicant
- ndiscvt(8)
Reviewed By: emaste, bcr (manpages)
Differential Revision: https://reviews.freebsd.org/D27609
With newer AMD GPUs (>=Navi,Renoir) there is FPU context usage in the
amdgpu driver.
The `kernel_fpu_begin/end` implementations in drm did not even allow nested
begin-end blocks.
Submitted by: Greg V
Reviewed By: manu, hselasky
Differential Revision: https://reviews.freebsd.org/D28061
Now that bhyve(8) supports UART, bvmconsole and bvmdebug are no longer needed.
This also removes the '-b' and '-g' flag from bhyve(8). These two flags were
marked deprecated in r368519.
Reviewed by: grehan, kevans
Approved by: kevans (mentor)
Differential Revision: https://reviews.freebsd.org/D27490
linux_common.c to linux_util.c so they become available on i386.
linux_common.c defines the linux_common kernel module but this module does
not exist on i386 and linux_common.c is not included in the linux module.
linux_util.c is included in the linux_common module on amd64 and the linux
module on i386.
Remove linux_common.c from files.i386 again. It was added recently in
r367433 when the DTrace provider definitions were moved.
The V4L feature declarations were moved to linux_common in r283423.
Move dtrace SDT definitions into linux_common module code. Also, build
linux_dummy.c into the linux_common kld -- we don't need separate
versions of these stubs for 32- and 64-bit emulation.
Reported by: several
PR: 250897
Discussed with: emaste, trasz
Tested by: John Kennedy, Yasuhiro KIMURA, Oleg Sidorkin
X-MFC-With: r367395
Differential Revision: https://reviews.freebsd.org/D27124
Currently, this supports SHA1 and SHA2-{224,256,384,512} both as plain
hashes and in HMAC mode on both amd64 and i386. It uses the SHA
intrinsics when present similar to aesni(4), but uses SSE/AVX
instructions when they are not.
Note that some files from OpenSSL that normally wrap the assembly
routines have been adapted to export methods usable by 'struct
auth_xform' as is used by existing software crypto routines.
Reviewed by: gallatin, jkim, delphij, gnn
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D26821
VMware now has arm64 support; move these to MI files in advance of
building them on arm64.
PR: 250308
Reported by: Vincent Milum Jr
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
APM BIOS was relevant only to early laptops (approximately P166 or
P200 and slower). These have not been relevant for a long time, and
this code has been untested for a long time (as far as I can
tell). The APM compat code in ACPI and the apm(8) command is not being
retired. Both of these items are still in use (apm(8) is more
scriptable than the replacement acpiconf, for the most part). This has
been commented out of i386 GENERIC since 2002. This code is not
relevant to any other port.
Discussed on: arch@
It no longer has any in-kernel consumers via OCF. smbfs still uses
single DES directly, so sys/crypto/des remains for that use case.
Reviewed by: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24773
It no longer has any in-kernel consumers.
Reviewed by: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24772
The devices supported by these drivers are obsolete ISA cards, and the
sync serial protocols they supported are essentially obsolete too.
Sponsored by: The FreeBSD Foundation
Use ${SRCTOP} instead of /usr/share.
Prefer to depend on option sc_dflt_fnt instead of sc.
gc the 4 otherwise identical instances in the tree.
Platforms that don't need this won't included it.
Fix the old-style build by using ${SRCTOP} instead of a weird
construct that only works for new-style build.
Simplify the building of keymap files by using macros
Move atkbdmap.h in files.x86
This has been broken since r296899 which removed the implicit
dependency on /usr/share.
This driver allows to usage of the paravirt SCSI controller
in VMware products like ESXi. The pvscsi driver provides a
substantial performance improvement in block devices versus
the emulated mpt and mps SCSI/SAS controllers.
Error handling in this driver has not been extensively tested
yet.
Submitted by: vbhakta@vmware.com
Relnotes: yes
Sponsored by: VMware, Panzura
Differential Revision: D18613
Many arm kernel configs bogusly specified WERROR=-Werror. There's no
reason for this because the default is that and there's no reason to
override. These date from a time when we needed to add additional
warning->error suppression. They are obsolete and were cut and paste
propagated from file to file.
Comment out all the WERROR=.... lines in powerpc. They aren't bogus,
but were appropriate for the old defaults for gcc4.2.1. Now that we've
made the policy decision to suppress -Werror by default on these
platforms, it is appropriate to comment these out. People wishing to
fix these errors can still un-comment them out, or say WERROR=-Werror
on the command line.
Fix two instances (cut and paste propagation) of hard-coded -Werror
in x86 code. Replace with ${WERROR} instead. This is a no-op change
except for people who build WERROR=-Wno-error :).
This should fix tinderbox / CI breakage.
NTB Tool driver is meant for testing NTB hardware driver functionalities,
such as doorbell interrupts, link events, scratchpad registers and memory
windows. This is a port of ntb_tool driver from Linux. It has been
verified on top of AMD and PLX NTB HW drivers.
Submitted by: Arpan Palit <arpan.palit@amd.com>
Cleaned up by: mav
MFC after: 2 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D18819
enough that unification will have to wait for the next pass.
Reviewed by: jhb (verbal OK on irc)
Differential Revision: https://reviews.freebsd.org/D21248