length of the struct in memmove() rather than an unintialized variable.
This fixes the first of two kernel page faults when ipfs is invoked.
PR: 235110
Reported by: David.Boyd49@twc.com
MFC after: 2 weeks
These are currently not reproducible because they're built by the
makewhatis on the freebsd-update build host, not the one in the tree.
Regenerate after update, and later we can avoid including it in
freebsd-update data.
PR: 214545, 217389
Reviewed by: delphij
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D10482
SIFTR does not allow any kind of filtering, but captures every packet
processed by the TCP stack.
Often, only a specific session or service is of interest, and doing the
filtering in post-processing of the log adds to the overhead of SIFTR.
This adds a new sysctl net.inet.siftr.port_filter. When set to zero, all
packets get captured as previously. If set to any other value, only
packets where either the source or the destination ports match, are
captured in the log file.
Submitted by: Richard Scheffenegger
Reviewed by: Cheng Cui
Differential Revision: https://reviews.freebsd.org/D18897
In all cases where ZFS sends BIO_FLUSH, it first waits for all related
writes to complete, so its BIO_FLUSH does not care about strict ordering.
Removal of one makes life much easier at least for NVMe driver, which
hardware has no concept of request ordering, relying completely on software.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Other types, such as BIO_FLUSH or BIO_ZONE, or especially new/unknown ones,
may imply some degree of ordering even if strict ordering is not requested
explicitly.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
copyright.
When all member nations of the Buenos Aires Convention adopted the Berne
Convention, the phrase "All rights reserved" became unnecessary to assert
copyright. Remove it from files under my or Panasas's copyright. The files
related to jedec_dimm(4) also bear avg@'s copyright; he has approved this
change.
Approved by: avg
Sponsored by: Panasas
r212160 tightened this from always using MSG_SIMPLE_Q_TAG to always
MSG_ORDERED_Q_TAG. Since it also marked all BIO_FLUSH requests with
BIO_ORDERED, this commit changes nothing immediately, but it returns
BIO_FLUSH callers ability to actually specify ordering they really
need, alike to other request types.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
When using poll(), select() or kevent() on netmap file descriptors,
netmap executes the equivalent of NIOCTXSYNC and NIOCRXSYNC commands,
before collecting the events that are ready. In other words, the
poll/kevent callback has side effects. This is done to avoid the
overhead of two system call per iteration (e.g., poll() + ioctl(NIOC*XSYNC)).
When the kqueue subsystem invokes the kqueue(9) f_event callback
(netmap_knrw), it holds the lock of the struct knlist object associated
to the netmap port (the lock is provided at initialization, by calling
knlist_init_mtx).
However, netmap_knrw() may need to wake up another netmap port (or even
the same one), which means that it may need to call knote().
Since knote() needs the lock of the struct knlist object associated to
the to-be-wake-up netmap port, it is possible to have a lock order reversal
problem (AB/BA deadlock).
This change prevents the deadlock by executing the knote() call in a
per-selinfo taskqueue, where it is possible to hold a mutex.
Reviewed by: aleksandr.fedorov_itglobal.com
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D18956
bus_teardown_intr(9) before pci_release_msi(9).
- Ensure that iflib(4) and associated drivers pass correct RIDs to
bus_release_resource(9) by obtaining the RIDs via rman_get_rid(9)
on the corresponding resources instead of using the RIDs initially
passed to bus_alloc_resource_any(9) as the latter function may
change those RIDs. Solely em(4) for the ioport resource (but not
others) and bnxt(4) were using the correct RIDs by caching the ones
returned by bus_alloc_resource_any(9).
- Change the logic of iflib_msix_init() around to only map the MSI-X
BAR if MSI-X is actually supported, i. e. pci_msix_count(9) returns
> 0. Otherwise the "Unable to map MSIX table " message triggers for
devices that simply don't support MSI-X and the user may think that
something is wrong while in fact everything works as expected.
- Put some (mostly redundant) debug messages emitted by iflib(4)
and em(4) during attachment under bootverbose. The non-verbose
output of em(4) seen during attachment now is close to the one
prior to the conversion to iflib(4).
- Replace various variants of spelling "MSI-X" (several in messages)
with "MSI-X" as used in the PCI specifications.
- Remove some trailing whitespace from messages emitted by iflib(4)
and change them to consistently start with uppercase.
- Remove some obsolete comments about releasing interrupts from
drivers and correct a few others.
Reviewed by: erj, Jacob Keller, shurd
Differential Revision: https://reviews.freebsd.org/D18980
The main differences with the currently implemented method are:
- Requires a local APIC EOI, since it doesn't bypass the local APIC
as the previous method used to do.
- Can be set to use different IDT vectors on each vCPU. Note that
FreeBSD doesn't make use of this feature since the event channel
IDT vector is reserved system wide.
Note that the old method of setting the event channel upcall is
not removed, and will be used as a fallback if this newly introduced
method is not available.
MFC after: 1 month
Sponsored by: Citrix Systems R&D
Effectively all i386 kernels now have two pmaps compiled in: one
managing PAE pagetables, and another non-PAE. The implementation is
selected at cold time depending on the CPU features. The vm_paddr_t is
always 64bit now. As result, nx bit can be used on all capable CPUs.
Option PAE only affects the bus_addr_t: it is still 32bit for non-PAE
configs, for drivers compatibility. Kernel layout, esp. max kernel
address, low memory PDEs and max user address (same as trampoline
start) are now same for PAE and for non-PAE regardless of the type of
page tables used.
Non-PAE kernel (when using PAE pagetables) can handle physical memory
up to 24G now, larger memory requires re-tuning the KVA consumers and
instead the code caps the maximum at 24G. Unfortunately, a lot of
drivers do not use busdma(9) properly so by default even 4G barrier is
not easy. There are two tunables added: hw.above4g_allow and
hw.above24g_allow, the first one is kept enabled for now to evaluate
the status on HEAD, second is only for dev use.
i386 now creates three freelists if there is any memory above 4G, to
allow proper bounce pages allocation. Also, VM_KMEM_SIZE_SCALE changed
from 3 to 1.
The PAE_TABLES kernel config option is retired.
In collaboarion with: pho
Discussed with: emaste
Reviewed by: markj
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D18894
The need to use libc malloc(3) from some places in libthr always
caused issues. For instance, per-thread key allocation was switched to
use plain mmap(2) to get storage, because some third party mallocs
used keys for implementation of calloc(3).
Even more important, libthr calls calloc(3) during initialization of
pthread mutexes, and jemalloc uses pthread mutexes. Jemalloc provides
some way to both postpone the initialization, and to make
initialization to use specialized allocator, but this is very fragile
and often breaks. See the referenced PR for another example.
Add the small malloc implementation used by rtld, to libthr. Use it in
thr_spec.c and for mutexes initialization. This avoids the issues with
mutual dependencies between malloc and libthr in principle. The
drawback is that some more allocations are not interceptable for
alternate malloc implementations. There should be not too much memory
use from this allocator, and the alternative, direct use of mmap(2) is
obviously worse.
PR: 235211
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D18988
This allows to reuse the allocator in other environments that get
malloc(3) and related functions from libc or interposer.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D18988
This fixes BIO_ORDERED semantics while also improving performance by:
- sleeping also before BIO_ORDERED bio, as defined, not only after;
- not queueing BIO_ORDERED bio to taskqueue if no other bios running;
- waking up sleeping taskqueue explicitly rather then rely on polling.
On Samsung SSD 970 PRO this shows sync write latency, measured with
`diskinfo -wS`, reduction from ~2ms to ~1.1ms by not sleeping without
reason till next HZ tick.
On the same device ZFS pool with 8 ZVOLs synchronously writing 4KB blocks
shows ~950 IOPS instead of ~750 IOPS before. I suspect ZFS does not need
BIO_ORDERED on BIO_FLUSH at all, but that will be next question.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Because of a typo, the code was mistakenly resetting the
vtnrx_vq pointer rather than vtntx_tq.
Reviewed by: bryanv
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D19015
handling for protocols without ports numbers.
Since port numbers were uninitialized for protocols like ICMP/ICMPv6,
ipfw_chk() used some non-zero values to create dynamic states, and due
this it failed to match replies with created states.
Reported by: Oliver Hartmann, Boris Lytochkin
Obtained from: Yandex LLC
X-MFC after: r342908
This will allow multiple consumers of the coverage data to be compiled
into the kernel together. The only requirement is only one can be
registered at a given point in time, however it is expected they will
only register when the coverage data is needed.
A new kernel conflig option COVERAGE is added. This will allow kcov to
become a module that can be loaded as needed, or compiled into the
kernel.
While here clean up the #include style a little.
Reviewed by: kib
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D18955
On sync-kloop stop, send a wake-up signal to the kloop, so that
waiting for the timeout is not needed.
Also, improve logging in netmap_freebsd.c.
MFC after: 3 days
This is a wild guess as to why bectl tests failed once upon a time in CI,
given no apparent way to see a transcript of cleanup routines with Kyua. The
bectl tests construct a new, clean zpool for every test. The failure
indicated was because of a mount that was leftover from a previous test, but
the previous test had succeeded so it's not clear how the mount remained
leftover unless the `zpool get health ${pool}` had somehow failed.
MFC after: 1 week
January 2018 changes -r327723 and -r327821. The softdep_bp_to_mp()
function failed to include VFIFO as one of the valid cases.
Although fifo's do not allocate blocks in the filesystem, they will
allocate blocks if they use extended attributes (such as ACLs). Thus,
softdep_bp_to_mp() needs to return a non-NULL mount pointer when
presented with a fifo vnode so that the soft updates write complete
will properly process the soft updates structures associated with the
extended attribute blocks. It was the failure to process these soft
updates structures, thus leaving them hanging off the buffer, which
lead to the "panic: softdep_deallocate_dependencies: dangling deps"
when trying to clean up the buffer after it was written.
PR: 230962
Reported by: 2t8mr7kx9f@protonmail.com
Reviewed by: kib
Tested by: Peter Holm
MFC after: 1 week
Sponsored by: Netflix
When performing a non-status operation on a single interface, it is
not necessary for ifconfig to build a list of all addresses in the
system, sort them, then iterate through them looking for the entry for
the single interface of interest. Doing so becomes increasingly
expensive as the number of interfaces in the system grows (e.g., in a
system with 1000+ vlan(4) interfaces).
Reviewed by: ae, kp
MFC after: 1 week
Sponsored by: RG Nets
Differential Revision: https://reviews.freebsd.org/D18919
Re-evaluating the ALTQ kernel configuration can be expensive,
particularly when there are a large number (hundreds or thousands) of
queues, and is wholly unnecessary in response to events on interfaces
that do not support ALTQ as such interfaces cannot be part of an ALTQ
configuration.
Reviewed by: kp
MFC after: 1 week
Sponsored by: RG Nets
Differential Revision: https://reviews.freebsd.org/D18918
- Use "in" instead of "on" when referring to directory and UFS partition.
- Switch from hw.physmem to hw.realmem and add a description to
distinguish the two.
- Explain why the "df" command is having trouble displaying ZFS sizes
correctly. Add a bit more descriptive text to help why the output of
"zfs list -o space" should be used.
- Switch to vmstat instead of iostat display for systat(1) as it shows
more information on one screen. Describe what is displayed based on the
text of the man page. Change the list of the other values accordingly.
- Sort the flags to "zfs destroy" alphabetically.
Reviewed by: rgrimes
Approved by: rgrimes
MFC after: 8 days
Differential Revision: https://reviews.freebsd.org/D18993
The existence of a PV entry for a mapping guarantees that the mapping
exists, so we should not need to test for that.
Reviewed by: kib
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18866
RFC 3168 defines an ECN-setup SYN-ACK packet as on with the ECE flags
set and the CWR flags not set. The code was only checking if ECE flag
is set. This patch adds the check to verify that the CWR flags is not
set.
Submitted by: Richard Scheffenegger
Reviewed by: tuexen@
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18996
Enforce net80211 rates for control / management / multicast / EAPOL frames
and allow to override rate for unicast frames via ifconfig(8) 'ucastrate'
option; by default it still uses f/w rate adaptation for unicast frames.
MFC after: 1 week
