include <file>:
Parse the contents of file before continuing with the current file.
includedir <dir>:
Parse the contents of every file in dir that ends in .conf before continuing
with the current file.
Any file or directory encountered while processing include or includedir
directives will be parsed exactly once, even if it is encountered multiple
times.
Reviewed by: kib, des
Approved by: des (mentor)
MFC after: 1 month
defined by the SNIA Common RAID Disk Data Format Specification v2.0.
Supports multiple volumes per array and multiple partitions per disk.
Supports standard big-endian and Adaptec's little-endian byte ordering.
Supports all single-layer RAID levels. Dual-layer RAID levels except
RAID10 are not supported now because of GEOM RAID design limitations.
Some work is still to be done, but the present code already manages basic
interoperation with RAID BIOS of the Adaptec 1430SA SATA RAID controller.
MFC after: 1 month
Sponsored by: iXsystems, Inc.
them and commit separately.
1. Rewrite the way growfs(8) finds the device and mount point. This makes
it possible to use e.g. "growfs /mnt"; it's also used to display more
helpful messages.
2. Be more user-friendly, using descriptive messages, like this:
OK to grow filesystem on /dev/md0, mounted on /mnt, from 9.8GB to 20GB? [Yes/No]"
3. Allow to specify the size (-s option) just like with mdconfig(8), i.e. with
postfixes ("mdconfig -s 10g").
4. Reload read-only filesystem after growing.
Reviewed by: kib, mckusick (earlier version)
Sponsored by: The FreeBSD Foundation
hash elements, and a helper matched_symbol() which match the given hash
entry and request, performing needed type and version checks.
Based on dragonflybsd support for GNU hash by John Marino <draco marino st>
Reviewed by: kan
Tested by: bapt
MFC after: 2 weeks
when there is no timeout, because read(2) will return immediately if there
is no data waiting in the TCP buffer, causing fetch_read() to busy-loop on
slow connections.
MFC after: 3 weeks
Noticed by: Yanhui Shen <shen.elf@gmail.com>
The typical case was:
static __inline int
convert_ccl(FILE *fp, char * __restrict p, [...])
{
[...]
if (p == SUPPRESS_PTR) {
[...]
} else {
[...]
}
[...]
}
This qualifier says that the pointer is the only one at that time
pointing to the resource.
Here, clang considers that "p" will never match "SUPPRESS_PTR" and
optimize the if{} block out. This leads to segfaults in programs calling
vfscanf(3) and vfwscanf(3) with just the format string (no arguments
following it).
The following softwares were reported to abort with segmentation fault
and this patch fixes it:
o cmake
o smartd
o devel/ORBit2
dim@ opened an LLVM PR to discuss this clang optimization:
http://llvm.org/bugs/show_bug.cgi?id=12656
Tested by: bsam@
the queue is not 'lpc stop'-ed. In that situation `lpq' will
not display the status message to the user, and the operator
may think the queue is already stopped when it is not.
MFC after: 3 weeks
conversions. Both the specification and the documentation say the
width is interpreted as the max number of wide characters to read, but
the implementation was interpreting it as the number of bytes to convert.
(See also r105317.)
This change has security implications for any applications that depend
on the buggy behavior, but the impact in practice is probably nil.
Any such application would already be buggy on other platforms that
get the semantics right. Also, these conversions are rarely used;
%ls, %lc, and %l[ are more appropriate.
Olympus FE-210 camera
LG UP3S MP3 player
Laser MP3-2GA13 MP3
PR: usb/119201
Submitted by: Peter Jeremy <peterjeremy@optushome.com.au>
Approved by: cperciva
MFC after: 1 week
This will give you more bandwidth for isochronous
FULL speed applications connected through a
High Speed HUB.
This patch has been tested with XHCI and EHCI.
MFC after: 1 week
reading wide characters manually. With this change, they now use
fgetwc(). To make this work, we use an internal version of fgetwc()
with a few extensions: it takes an mbstate * because non-wide streams
don't have a built-in mbstate, and it indicates the number of bytes
read.
vfscanf() now resembles vfwscanf() more closely. Minor functional
improvements include working xlocale support in vfscanf(), setting the
stream error indicator on encoding errors, and proper handling of
shift-based encodings. (Actually, making shift-based encodings work
with non-wide streams is hopeless, but the implementation now matches
the broken specification.)
While removing unnecessary entries from .PATH.c I missed that for the
examples WPA_SUPPLICANT_DISTDIR/HOSTAPD_DISTDIR is explicitly added to
.PATH.
Tested by: lev
MFC after: 2 weeks
is considered "busy but not doing any active TX or frame RX."
Just keep in mind that "frame RX" is "decoding what looks like a wifi
signal", not necessarily "frame successfully decoded for this particular
device."
DST should not need to worry about scheduling jobs when the DST time
changes.
Rather than removing the BUGS section in crontab(5) regarding this,
note that disabling '-s' may still cause jobs to be executed twice or
not at all.
PR: 166318
Submitted by: Florian k Unglaub (f.unglaub%googlemail!com)
MFC After: 1 week
in the HAL. That's very memory hungry (32k just for channel statistics)
which would be better served by keeping a summary in the ANI state.
Or, later, keep a survey history in net80211.
So:
* Migrate the ah_chansurvey array to be a single entry, for the current
channel.
* Change the ioctl interface and ANI code to just reference that.
* Clear the ah_chansurvey array during channel reset, both in the AR5212
and AR5416 reset path.
This tool changes the default buffering behaviour of standard
stdio streams.
It only works on dynamic binaries. To make it work for static
ones it would require cluttering stdio because there no single
entry point.
PR: 166660
Reviewed by: current@, jhb
Approved by: kib (mentor)
MFC after: 1 week
WITHOUT_OPENSSL build by using the wpa's internal crypto support if
openssl is not available, this allows us to unconditionally enable
EAP support.
MFC after: 2 weeks
* Always call ar5416GetListenTime()
* Modify ar5416GetListenTime() to:
+ don't update the ANI state if there isn't any ANI state;
+ don't update the channel survey state if there's no active
channel - just to be paranoid
+ copy the channel survey results into the current sample slot
based on the current channel; then increment the sample counter
and sample history counter.
* Modify ar5416GetMIBCyclesPct() to simply return a HAL_SURVEY_SAMPLE,
rather than a set of percentages. The ANI code wasn't using the
percentages anyway.
TODO:
* Create a new function which fetches the survey results periodically
* .. then modify the ANI code to use the pre-fetched values rather than
fetching them again
* Roll the 11n ext busy function from ar5416_misc.c to update all the
counters, then do the result calculation
* .. then, modify the MIB counter routine to correctly fetch a snapshot -
freeze the counters, fetch the values, then reset the counters.
from the current channel.
There seem to be some occasional issues with the extension channel
counters reporting more than 100% of use. I'll investigate that
soon.
