taskqueued interrupt mode is going to be quite complex. Since
the polling mode is considered legacy feature for em(4) driver,
the decision is made to make polling and new interrupt handler
mutually exclusive, selected at compile time.
If kernel is compiled with DEVICE_POLLING, the fast taskqueued
interrupt handler code is disabled and the em_poll() and legacy
em_intr() functions are enabled. Otherwise, legacy functions
are disabled and only em_intr_fast() code is compiled.
Discussed with: scottl
Clean out the abortive start to homegrown, per-mpt,
Domain Validation. This should really be done at a
higher level.
Use the PIM_SEQSCAN flag for U320- this seems to correct
cases of being unable to consistently negotiate U320 in
the cases where I'd seen this before.
Between this and other recent checkins, this driver is
pretty close to being ready for MFC.
Reviewed by: scottl, ken, scsi@
MFC after: 1 week
what to do with it.
This forces us to scan targets sequentially, not in parallel.
The reason we might want to do this is that SPI negotiation
might not work right at the SIM level if we try to do it
in parallel. We *could* fix this for each SIM where this is
broken, but it's a lot harder to do that when we can simply
ask CAM to probe sequentially.
If PIM_SEQSCAN is not set (default), the original behaviour for
probing is unchanged.
LUN probing is still done in parallel for each target in either
case.
While we're at it, clean up some resource leakage for error
cases.
Reviewed by: ken, scott, scsi@
MFC after: 1 week
255.255.255.0, and a default route with gateway x.x.x.1. Now if
the address mask is changed to something more specific, e.g.,
255.255.255.128, then after the mask change the default gateway
is no longer reachable.
Since the default route is still present in the routing table,
when the output code tries to resolve the address of the default
gateway in function rt_check(), again, the default route will be
returned by rtalloc1(). Because the lock is currently held on the
rtentry structure, one more attempt to hold the lock will trigger
a crash due to "lock recursed on non-recursive mutex ..."
This is a general problem. The fix checks for the above condition
so that an existing route entry is not mistaken for a new cloned
route. Approriately, an ENETUNREACH error is returned back to the
caller
Approved by: andre
o define HAL_SOFTC, HAL_BUS_TAG, and HAL_BUS_HANDLE to be machine
independent; this fixes portability issues with bsd systems
o add ah_disable api for turning off operation of both MAC and PHY
o add ah_getAntennaSwitch and ah_setAntennaSwitch api's for better control
of antenna usage and diversity
o add ah_setAckCTSRate and ah_setAckCTSRate for controlling tx rate of
h/w generated frames
o add ah_setBeaconTimers api for simpler setting of the beacon timer registers
o remove ah_waitForBeaconDone api
o add HAL_TXDESC_DURENA flag to enable h/w duration setting in tx descriptor
o correct documentation of min/max tx power units (.5 dBm)
o switch arm, mips, and powerpc builds to use functions for register
read/write operations
o fix sparc builds to not reference %g2 and %g3 registers
o add public builds for SoC's
MFC after: 1 month
with fast_ipsec(4) and geli(8) authentication (comming soon).
If consumer requests only for HMAC algorithm (without encryption), return
EINVAL.
- Add support for the CRD_F_KEY_EXPLICIT flag, for both encryption and
authentication.
process was sucessfully audited. Otherwise, generate the PID
token. This change covers the pid < 0 cases, and pid lookup
failure cases.
Submitted by: wsalamon
Obtained from: TrustedBSD Project
set to ILACC rather than PCnet-PCI as VMware doesn't implement ILACC
compatibility, resulting in the VMware virtual machine to crash if
enabled. Add a comment regarding usage of ILACC vs. PCnet-PCI mode.
Reported and tested by: gnn, wsalamon
global audit trail configuration. This allows applications consuming
audit trails to specify parameters for which audit records are of
interest, including selecting records not required by the global trail.
Allowing application interest specification without changing the global
configuration allows intrusion detection systems to run without
interfering with global auditing or each other (if multiple are
present). To implement this:
- Kernel audit records now carry a flag to indicate whether they have
been selected by the global trail or by the audit pipe subsystem,
set during record commit, so that this information is available
after BSM conversion when delivering the BSM to the trail and audit
pipes in the audit worker thread asynchronously. Preselection by
either record target will cause the record to be kept.
- Similar changes to preselection when the audit record is created
when the system call is entering: consult both the global trail and
pipes.
- au_preselect() now accepts the class in order to avoid repeatedly
looking up the mask for each preselection test.
- Define a series of ioctls that allow applications to specify whether
they want to track the global trail, or program their own
preselection parameters: they may specify their own flags and naflags
masks, similar to the global masks of the same name, as well as a set
of per-auid masks. They also set a per-pipe mode specifying whether
they track the global trail, or user their own -- the door is left
open for future additional modes. A new ioctl is defined to allow a
user process to flush the current audit pipe queue, which can be used
after reprogramming pre-selection to make sure that only records of
interest are received in future reads.
- Audit pipe data structures are extended to hold the additional fields
necessary to support preselection. By default, audit pipes track the
global trail, so "praudit /dev/auditpipe" will track the global audit
trail even though praudit doesn't program the audit pipe selection
model.
- Comment about the complexities of potentially adding partial read
support to audit pipes.
By using a set of ioctls, applications can select which records are of
interest, and toggle the preselection mode.
Obtained from: TrustedBSD Project
device went away while open or if you tried to change the config
number while devices were open. Based on the patch from the PR with
a number of changes as discussed with the submitter.
PR: usb/97271
Submitted by: Anish Mistry
knowledge of user vs. kernel audit records into
audit_worker_process_record(). This largely confines vnode
knowledge to audit_record_write(), but avoids that logic knowing
about BSM as opposed to byte streams. This will allow us to
improve our ability to support real-time audit stream processing
by audit pipe consumers while auditing is disabled, but this
support is not yet complete.
Obtained from: TrustedBSD Project
Break out logic to call audit_record_write() and handle error
conditions into audit_worker_process_record(). This will be the
future home of some logic now present in audit_record_write()
also.
Obtained from: TrustedBSD Project
worker.
Rename audit_commit_cv to audit_watermark_cv, since it is there to
wake up threads waiting on hitting the low watermark. Describe
properly in comment.
Obtained from: TrustedBSD Project
src/sys/security/audit:
- Clarify and clean up AUR_ types to match Solaris.
- Clean up use of host vs. network byte order for IP addresses.
- Remove combined user/kernel implementations of some token creation
calls, such as au_to_file(), header calls, etc.
Obtained from: TrustedBSD Project
- Cleanup of AUR_ data types.
- Comment fixes.
- au_close_token() definition.
- Break out of kernel vs. user space token interfaces for headers.
Note: this may briefly break the kernel build until other kernel files are
updated to match.
Obtained from: TrustedBSD Project
Eliminate unnecessary, recursive acquisitions and releases of the page
queues lock by free_pv_entry() and pmap_remove_pages().
Reduce the scope of the page queues lock in pmap_remove_pages().
Before the change if a hardware crypto driver was loaded after
the software crypto driver, calling crypto_newsession() with
hard=0, will always choose software crypto.
By using a pointer to struct dos_partition, we implicitly tell the
compiler that the pointer is 4-bytes aligned, even though we know
that's not the case. The fact that we only dereference the pointer
to access a byte-wide field (field dp_ptyp) is not a guarantee that
the compiler will in fact use a byte-wide load. On some platforms
it's more efficient to use long word or quad word loads and use
bit-shifting and bit-masking to get the intended byte. On those
platforms an misaligned load will be the result.
The fix is to use byte-wide pointer arithmetic based on sizeof() and
offsetof() to avoid invalid casts which avoids that the compiler
makes invalid assumptions.
Backtrace provided by: wilko@
MFC after: 1 week
axe_cmd() calls. Without this the device can get confused if multiple
threads attempt these operations concurrently. The problem was
easily reproducible by running "ifconfig axe0" in a loop because
eventually it would conflict with axe_tick_task().
A similar approach is probably required in all USB ethernet drivers.
- Add defines with block length for each HMAC algorithm.
- Add AES_BLOCK_LEN define which is an alias for RIJNDAEL128_BLOCK_LEN.
- Add NULL_BLOCK_LEN define.
Move the code for printing timer statistics into a test function instead of
an ifdef (accessible via the debug.acpi.hpet_test tunable). Also use defines
for register offsets instead of magic values.
Courtesy of: slow flight to HK
bread() the UFS superblock. Should eliminate crashes when trying
to do: mount -t ufs on an audio CD.
PR: kern/85893
Reported by: Russell Francis <rfrancis at ev dot net>
MFC after: 1 week
non-intuitive for the ~ to be built into the mask. All the users now
explicitly ~ the mask. In addition, add MTX_UNOWNED to the mask even
though it technically isn't a flag. This should unbreak mtx_owner().
Quickly spotted by: kris
it. We just moved it to be pci specific, so this was causing compile
problems (linking problems, so I didn't notice since I unwisely just
built the module).
vendor-specific device ids across vendors.
- Include the revision in the dc_devs[] array instead of special casing
the revid handling in dc_devtype().
- Use PCI bus accessors to read registers instead of pci_read_config()
where possible.
- Use an 8-bit write to update the latency timer.
- Use PCIR_xxx constants and remove unused DC_xxx related to standard
PCI config registers.
MFC after: 1 week
dropped. This prevents a bug introduced during the socket/pcb refcounting
work from occuring, in which occasionally the retransmit timer may fire
after a connection has been reset, resulting in the resulting R|A TCP
packet having a source port of 0, as the port reservation has been
released.
While here, fixing up some RUNLOCK->WUNLOCK bugs.
MFC after: 1 month
resulting in some build failures. Instead, to fix the problem of bpf not
being present, check the pointer before dereferencing it.
This is a temporary bandaid until we can decide on how we want to handle
the bpf code not being present. This will be fixed shortly.
forget to unbusy file system before its destruction.
This fixes the following warning on mount failure:
Mount point <X> had 1 dangling refs
Tested by: wkoszek
(1) bpf peer attaches to interface netif0
(2) Packet is received by netif0
(3) ifp->if_bpf pointer is checked and handed off to bpf
(4) bpf peer detaches from netif0 resulting in ifp->if_bpf being
initialized to NULL.
(5) ifp->if_bpf is dereferenced by bpf machinery
(6) Kaboom
This race condition likely explains the various different kernel panics
reported around sending SIGINT to tcpdump or dhclient processes. But really
this race can result in kernel panics anywhere you have frequent bpf attach
and detach operations with high packet per second load.
Summary of changes:
- Remove the bpf interface's "driverp" member
- When we attach bpf interfaces, we now set the ifp->if_bpf member to the
bpf interface structure. Once this is done, ifp->if_bpf should never be
NULL. [1]
- Introduce bpf_peers_present function, an inline operation which will do
a lockless read bpf peer list associated with the interface. It should
be noted that the bpf code will pickup the bpf_interface lock before adding
or removing bpf peers. This should serialize the access to the bpf descriptor
list, removing the race.
- Expose the bpf_if structure in bpf.h so that the bpf_peers_present function
can use it. This also removes the struct bpf_if; hack that was there.
- Adjust all consumers of the raw if_bpf structure to use bpf_peers_present
Now what happens is:
(1) Packet is received by netif0
(2) Check to see if bpf descriptor list is empty
(3) Pickup the bpf interface lock
(4) Hand packet off to process
From the attach/detach side:
(1) Pickup the bpf interface lock
(2) Add/remove from bpf descriptor list
Now that we are storing the bpf interface structure with the ifnet, there is
is no need to walk the bpf interface list to locate the correct bpf interface.
We now simply look up the interface, and initialize the pointer. This has a
nice side effect of changing a bpf interface attach operation from O(N) (where
N is the number of bpf interfaces), to O(1).
[1] From now on, we can no longer check ifp->if_bpf to tell us whether or
not we have any bpf peers that might be interested in receiving packets.
In collaboration with: sam@
MFC after: 1 month
fixing speed negotiation.
Also fix the mpt_execute_req function to actually
match mpt_execute_req_a64. This may explain why
i386 users were having more grief.
result, raw_uabort() now needs to call raw_detach() directly. As
raw_uabort() is never called, and raw_disconnect() is probably not ever
actually called in practice, this is likely not a functional change, but
improves congruence between protocols, and avoids a NULL raw cb pointer
after disconnect, which could result in a panic.
MFC after: 1 month
that it just warns the user with a printf when it misaligns a piece
of memory that was requested through a busdma tag.
Some drivers (such as mpt, and probably others) were asking for alignments
that could not be satisfied, but as far as driver operation was concerned,
that did not matter. In the theory that other drivers will fall into
this same category, we agreed that panicing or making the allocation
fail will cause more hardship than is necessary. The printf should
be sufficient motivation to get the driver glitch fixed.
- remove call to getmntopts(), and just pass -o options to
nmount(). This removes some confusion as to what options
msdosfs can parse, by pushing the responsibility of option parsing
to the VFS and FS specific code in the kernel.
msdosfs_vfsops.c:
- add "force" and "sync" to msdosfs_opts. They used to be specified
in mount_msdosfs.c, so move them here. It's not clear whethere these
options should be placed into global_opts in vfs_mount.c or not.
Motivated by: marcus
notification so all interfaces including pseudo are reported. When netif
creates the clones at startup devctl_disable has not been turned off yet so the
interfaces will not be initialised twice, enforce this by adding an explicit
order between rc.d/netif and rc.d/devd.
This change allows actions to taken in userland when an interface is cloned
and the pseudo interface will be automatically configured if a ifconfig_<int>=""
line exists in rc.conf.
Reviewed by: brooks
No objections on: net
These pages are allocated from the direct map, and were not previous
tracked. This included the vm_page_array and the early UMA bootstrap
pages.
Reviewed by: peter
Correct a bug in the handling of backslash characters in smbfs which can
allow an attacker to escape from a chroot(2). [2]
Security: FreeBSD-SA-06:15.ypserv [1]
Security: FreeBSD-SA-06:16.smbfs [2]
the first and last cache line in PREREAD, and just invalidate the cache
lines in POSTREAD, instead of write-back/invalidating in POSTREAD, which
could lead to stale data overriding what has been transfered by DMA.
a) were incorrectly written and therefore never compiled into
assertions, and
b) were incorrectly specified and when compiled resulted in a
failed assertion.
for file types other than VREG, VDIR and shared memory objects.
We already handle VREG, VLNK and VDIR cases. Silently ignore
truncate requests for all the rest. Adjust comments.
PR: kern/98064
Submitted by: bde
Security: local DoS
Regress. test: regression/fifo/fifo_misc
MFC after: 2 weeks
fixes filesystem corruption when nextboot.conf is located after
cylinder 1023. The bug appears to have been introduced at the time
bd_read was copied to create bd_write.
PR: bin/98005
Reported by: yar
MFC after: 1 week
usage as of SPC2r20. Specifically, handle the BQueue
flag which will indicate that a device supports the
Basic Queueing model (no Head of Queue or Ordered tags).
When this flag is set, SID_CmdQueue is clear. This has
causes FreeBSD to assume that the device did not support
tagged operations.
MFC after: 1 month
for IOCTLs where casting data to intptr_t * isn't the right thing to do
as _IO() isn't used for them but _IOR(..., int)/_IOW(..., int) are (i.e.
for all IOCTLs except VMIO_SIOCSIFFLAGS), fixing tap(4) on big-endian
LP64 machines.
PR: sparc64/98084
OK'ed by: emax
MFC after: 1 week
`-Wundef'
Warn whenever an identifier which is not a macro is encountered in
an `#if' directive, outside of `defined'. Such identifiers are
replaced with zero.
enabled. It has been commented out for a reason I forgot but I suspect
does not apply anymore.
Technically speaking it's not required to do it, has the data and the
instruction cache have been disabled in _start(). However, it may change
in the future, so I don't want to rely on this behavior.
Submitted by: kevlo
use a different mechanism for setting warning flags, and using
WARNS here only has null or negative effects.
Submitted by: bde (I think it means "submitted")
vmspace_exitfree() and vmspace_free() which could result in the same
vmspace being freed twice.
Factor out part of exit1() into new function vmspace_exit(). Attach
to vmspace0 to allow old vmspace to be freed earlier.
Add new function, vmspace_acquire_ref(), for obtaining a vmspace
reference for a vmspace belonging to another process. Avoid changing
vmspace refcount from 0 to 1 since that could also lead to the same
vmspace being freed twice.
Change vmtotal() and swapout_procs() to use vmspace_acquire_ref().
Reviewed by: alc
can see the results of SPI negotiation w/o being overwhelmed
with other crap).
+ For U320 devices, check against both Settings *and* DV flags before
deciding whether we need to skip actual SPI settings for a device.
+ Go back to creating a 'physical disk' side of a raid/passthru bus that
is limited to the number of maximum physical disks. Actually, this isn't
probably *quite* right yet for one RAID volume, and if we ever end up
with finding a device that supports more than one RAID volume (not likely),
it probably won't quite be right either.
The problem here is that the creating of this 'physical' passthru sim is
just a cheap way to leverage off the CAM midlayer to do our negotiation
for us on the subentities that make up a RAID volume. It almost causes
more trouble than it is worth because we have to remember which side
we're talking to in terms of forming commands and which target ids are
real and so on. Bleah.
+ Skip trying to actually do SPI settings for the RAID volumes on the
real side of the raid/passthru bus pair- this just confuses the issue.
The underlying real physical devices will have the negotiation performed
and the Raid volume will inherit the resultant settings. At the sime time,
non-RAID devices can be on the same real bus, so *do* perform negotiations
with them.
+ At the end of doing all of the settings twiddling, *ahem*, remember to
go update the settings on the card itself (dunno how this got nuked).
At this point, negotiations *seem* to be being done (again) correctly for
both RAID volumes and their subentities. And they seem to be *mostly*
now right for other non-RAID entities on the same bus (I ended up with
3 out of 8 other disks still at narror/async- haven't the slightest
idea why yes).
Finally, negotiations on a normal bus seem to work (again).
There's still more work coming into this area, but we're in the
final stretch.
the passed target id is one of the RAID VolumeID. This result
is used to decide whether to try and do actual SPI negotiations
on the real side of the raid/passthru bus pair. The reason we
check this is that we can have both RAID volumes and real devices
on the same bus.
Retire pmap_track_modified(). We no longer need it because we do not
create managed mappings within the clean submap. To prevent regressions,
add assertions blocking the creation of managed mappings within the clean
submap.
POSIX (susv3) requires this, but it is unclear what should be inherited,
duplicating whole 387 stack for new thread seems to be unnecessary and
dangerous. Revert to previous code, force a new thread to be started with
clean FP state.
USBD_FORCE_SHORT_XFER to ensure that we actually build and execute
a transfer. This means that the various alloc_sqtd_chain functions
will always construct a transfer, so it is safe to modify the
allocated descriptors on return. Previously there were cases where
a zero length transfer would cause a NULL dereference.
Reported by: bp
will allow the NFS server to call vfs_stdcheckexp() on the exported nullfs
filesystem, not the underlying filesystem being nullfs mounted.
If the lower filesystem was not NFS exported, then the NFS exported
null filesystem would not work.
Pointed out by: scottl
PR: kern/87906
MFC after: 1 week
- Reduce the number of RX and TX buffers bfe uses so that it does not use more
bounce buffers than busdma is willing to allow it to use
See if_bfe.c for comments on why this is now safe to do.
Also use BUS_DMA_ALLOCNOW to be on the safe side.
2. Look for the Descriptor Error, and Descriptor Protocol Error flags from
the card, and down the interface if we detect either.
#1 (along with fixes to busdma) makes sure that this card works in all
memory situations. Prior to this change, it was just luck that 512 count
RX/TX lists were properly aligned. Now we can use any size of RX/TX lists
and still have them properly aligned.
#2 ensures that we don't get into an endless interrupt storm if busdma fails
us. Descriptor Protocol Error would occur if we misaligned the TX/RX rings,
and Descriptor Error would occur if we tried to give the card descriptors
or rings with addresses > 1G. Trying to reinitialize the card isn't going
to fix these errors, hence we don't try.
Add a quick hack to ensure that bus_dmamem_alloc properly aligns
small allocations with large alignment requirements.
Add a panic to detect cases where we've still failed to properly align.
lookup, rename, strategy, islocked
The missing % sign meant that the lines were processed as plain
comments and the corresponding assertions were never generated.
the high 16 bits is non-zero, fxrstor instruction will generate GP fault,
resulting kernel crash, this bug can be triggered by setcontext and
ptrace(PT_SETXMMREGS).
host controllers to avoid the need to allocate any multi-page
physically contiguous memory blocks. This makes it possible to use
USB devices reliably on low-memory systems or when memory is too
fragmented for contiguous allocations to succeed.
The USB subsystem now uses bus_dmamap_load() directly on the buffers
supplied by USB peripheral drivers, so this also avoids having to
copy data back and forth before and after transfers. The ehci and
ohci controllers support scatter/gather as long as the buffer is
contiguous in the virtual address space. For uhci the hardware
cannot handle a physical address discontinuity within a USB packet,
so it is necessary to copy small memory fragments at times.
lost one set to a peninsula power failure last night. After
this, I can see both submembers and the raid volumes again,
but speed negotiation is still broken.
Add a mpt_raid_free_mem function to centralize the resource
reclaim and fixed a small memory leak.
Remove restriction on number of targets for systems with IM enabled-
you can have setups that have both IM volumes as well as other devices.
Fix target id selection for passthru and nonpastrhu cases.
Move complete command dumpt to MPT_PRT_DEBUG1 level so that just
setting debug level gets mostly informative albeit less verbose
dumping.
but large parts are rewritten by matk and tanimura.
This is old code, it's not maintained since 2003. We also don't have a
maintainer for this! Yuriy Tsibizov took it and uses it in his emu10kx
driver. Since the emu10kx driver will enter the tree "soon" (some bugs
have to be fixed after Yuriy return from his holidays), I add it here
already.
This also contains some changes to emu10k1 and cmi, so if you're lucky,
you can now make some kind of use of midi with those soundcards.
To all those poor souls which don't have such a card: feel free to send
patches, we don't have a maintainer for this.
To those which miss a specific feature in the midi code: feel free to
submit patches, we don't have a maintainer for this.
Oh, did I already told that it would be nice if someone would take care
of it? Maintainer with midi equipment wanted! :-)
If you get LOR's, submit a PR and notify multimedia@ please. If you get
panics, submit a PR with a backtrace (compile the sound system into your
kernel instead of using modules in this case) and notify multimedia@
please.
Written by: matk, tanimura
Submitted by: "Yuriy Tsibizov" <Yuriy.Tsibizov@gfk.ru>
Based upon: code from NetBSD
but large parts are rewritten by matk and tanimura.
This is old code, it's not maintained since 2003. We also don't have a
maintainer for this! Yuriy Tsibizov took it and uses it in his emu10kx
driver. Since the emu10kx driver will enter the tree "soon" (some bugs
have to be fixed after Yuriy return from his holidays), I add it here
already.
This also contains some changes to emu10k1 and cmi, so if you're lucky,
you can now make some kind of use of midi with those soundcards.
To all those poor souls which don't have such a card: feel free to send
patches, we don't have a maintainer for this.
To those which miss a specific feature in the midi code: feel free to
submit patches, we don't have a maintainer for this.
Oh, did I already told that it would be nice if someone would take care
of it? Maintainer with midi equipment wanted! :-)
If you get LOR's, submit a PR and notify multimedia@ please. If you get
panics, submit a PR with a backtrace (compile the sound system into your
kernel instead of using modules in this case) and notify multimedia@
please.
Written by: matk, tanimura
Submitted by: "Yuriy Tsibizov" <Yuriy.Tsibizov@gfk.ru>
Based upon: code from NetBSD
the LIST checks). Races may lead to list corruption, which can be
difficult to unravel in a post-mortem analysis. These checks verify
that the prev and next pointers are consistent when inserting or
removing elements, thus catching any corruption earlier.
It uses doxygen to generate the API documentation. For each subsystem
a very small (about 20 lines with comments) subsystem specific Doxyfile
has to be written (have a look at the README for more). All common doxygen
options are specified in a separate file.
The framework is configured to not only generate the HTML version, but also
a PDF version (the paper size is hardcoded to DIN A4 currently and depending
on the subsystem you have to increase some limits in the latex configuration
of your system, the README tells more about this).
It also allows cross-references between the subsystems (it generates doxygen
tag files).
Currently the docs are generated in OBJDIR, but this may change after
coordination with doc@. The makefile is prepared to generate/move various
parts of the generated docs to different destinations.
TARGET_ARCH is respected and some env-vars are set for architecture specific
handling of the source (the README tells more).
Subsystems for which docs are generated:
- cam - crypto - dev_pci
- dev_sound - dev_usb - geom
- i4b - kern - libkern
- linux - net80211 - netgraph
- netinet - netinet6 - netipsec
- opencrypto - vm
Requested by: gnn
This used to make syscons switch to vty0 when we entered DDB but this
was lost in the KDB shuffle. We may want to bring it back down the road
but it should be done by calling cn_init_t/cn_term_t instead, possibly
with a flag argument saying "Debugger!"
other timeouts could not happen while suspending, including timeouts
for things like msleep. This caused the system to hang on suspend
when the cbb was enabled, since its suspend path powered down the
socket which used a timeout to wait for it to be done.
APM now creates a thread when it is enabled, and deletes the thread
when it is disabled. This thread takes the place of the timeout by
doing its polling every ~.9s. When the thread is disabled, it will
wakeup early, otherwise it times out and polls the varius things the
old timeout polled (APM events, suspend delays, etc).
This makes my Sony VAIO 505TS suspend/resume correctly when APM is
enabled (ACPI is black listed on my 505TS).
This will likely fix other problems with the suspend path where
drivers would sleep with msleep and/or do other timeouts. Maybe
there's some special case code that would use DELAY while suspending
and msleep otherwise that can be revisited and removed.
This was also tested by glebius@, who pointed out that in the patch I
sent him, I'd forgotten apm_saver.c
MFC After: 3 weeks
sendfile(). This causes sendfile() to use the file descriptor
reference to the socket instead of bumping the socket reference
count, which avoids an additional refcount operation, as well as a
potential expensive socket refcount drop, which can lead to
contention on the accept mutex. This change also has the side
effect of further reducing the number of cases where an in-progress
I/O operation can occur on a socket after close, as using the file
descriptor refcount prevents the socket from closing while in use.
MFC after: 3 months
If B_NOCACHE is set the pages of vm backed buffers will be invalidated.
However clean buffers can be backed by dirty VM pages so invalidating them
can lead to data loss.
Add support for flush dirty page in the data invalidation function
of some network file systems.
This fixes data losses during vnode recycling (and other code paths
using invalbuf(*,V_SAVE,*,*)) for data written using an mmaped file.
Collaborative effort by: jhb@,mohans@,peter@,ps@,ups@
Reviewed by: tegge@
MFC after: 7 days
stopped before adjusting their priority and setting them on the run
q so they cannot race for resources (pointed out by njl).
While here add a console printf on thread create fails; otherwise
noone may notice (e.g. return value is always 0 and caller has no
way to verify).
Reviewed by: jhb, scottl
MFC after: 2 weeks
client into the kernel by default, and many users won't use NFS,
don't start an extra 4 kernel threads that are unused. Once NFS
becomes active, it will start nfsiod's as it needs them.
We might consider mandating a minimum iod's equal to the number of
active NFS mounts (truncated to some value), which would force some
to remain available without having to create a new one if the file
system is mostly inactive.
PR: 70880
MFC after: 2 weeks
Prodded by: cel
Head nod: peter
Pointed out by: Joe <fbsd_user at a1poweruser dot com>
was done, I believe, to work around some cards having issues in the
suspend case. I think that this helped my Sony VAIO TS505 work better
when it had certain wireless cards in it and I did a apm -z. I've not
tested suspend/resume on other laptops in a long time, so I hope this
doesn't cause greif. Please let me know if it does.
of cases where we didn't take out the lock before setting or clearing
a bit. This apparently can lead to a race at kldunload time (at least
on my Turion64 laptop, never saw it on my Sony Vaio).
