- C99 initializers.
- Change the default volume label from "NO NAME" to "NO_NAME".
- Set OEM String to "BSD4.4 " following the unnamed spacing convention
in that other OS that suggests "MSWIN4.1"
Also, David Naylor's changes for Clang, mostly changing the signess
of constants.
Submitted by: Pedro F. Giffuni <giffunip tutopia com>
Clang fixes by: David Naylor <naylor.b.david gmail com>
Reviewed by: bde (with some disagreement about Clang issues)
MFC after: 2 weeks
According to the last POSIX specification that contained <sys/timeb.h>,
this header should also typedef time_t properly. Also add a proper
comment to the final #endif.
caching code for IPv6 by fixing a typo that used the incorrect variable.
It also fixes the indentation of the statement above it.
Reported by: simon AT comsys.ntu-kpi.kiev.ua
MFC after: 5 days
scalable shared memory node, which is used in large UltraSPARC III based
machines to group snooping-coherency domains together, like schizo(4) to
be treated like nexus(4) children.
to the exclusion lists as the CPU nodes aren't handled as regular devices
either. Also add the pseudo-devices found in Sun Fire V1280.
- Allow nexus_attach() and nexus_alloc_resource() to be used by drivers
derived from nexus(4) for subordinate busses.
- Don't add the zero-sized memory resources of glue devices to the resource
lists.
root nexus device for the CPUs as starting with UltraSPARC IV the 'cpu'
nodes hang off of from 'cmp' (chip multi-threading processor) or 'core'
or combinations thereof. Also in large UltraSPARC III based machines
the 'cpu' nodes hang off of 'ssm' (scalable shared memory) nodes which
group snooping-coherency domains together instead of directly from the
nexus.
It would be great if we could use newbus to deal with the different ways
the 'cpu' devices can hang off of pseudo ones but unfortunately both
cpu_mp_setmaxid() and sparc64_init() have to work prior to regular device
probing.
- Add support for UltraSPARC IV and IV+ CPUs. Due to the fact that these
are multi-core each CPU has two Fireplane config registers and thus the
module/target ID has to be determined differently so the one specific
to a certain core is used. Similarly, starting with UltraSPARC IV the
individual cores use a different property in the OFW device tree to
indicate the CPU/core ID as it no longer is in coincidence with the
shared slot/socket ID.
This involves changing the MD KTR code to not directly read the UPA
module ID either. We use the MID stored in the per-CPU data instead of
calling cpu_get_mid() as a replacement in order prevent clobbering any
registers as side-effect in the assembler version. This requires CATR()
invocations from mp_startup() prior to mapping the per-CPU pages to be
removed though.
While at it additionally distinguish between CPUs with Fireplane and
JBus interconnects as these also use slightly different sizes for the
JBus/agent/module/target IDs.
- Make sparc64_shutdown_final() static as it's not used outside of
machdep.c.
cylinder groups that are created. When the filesystem is first created,
newfs always initialises the first two blocks of inodes, and then in the
UFS1 case will also initialise the remaining inode blocks. The changes in
growfs.c 1.23 broke the initialisation of all inodes, seemingly based on
this implementation detail in newfs(8). The result was that instead of
initialising all inodes, we would actually end up initialising all but the
first two blocks of inodes. If the filesystem was grown into empty
(all-zeros) space then the resulting filesystem was fine, however when
grown onto non-zeroed space the filesystem produced would appear to have
massive corruption on the first fsck after growing.
A test case for this problem can be found in the PR audit trail.
Fix this by once again initialising all inodes in the UFS1 case.
PR: bin/115174
Submitted by: Nate Eldredgei nge cs.hmc.edu
Reviewed by: mjacob
MFC after: 1 month
- introduce drbr_needs_enqueue that returns whether the interface/br needs
an enqueue operation: returns true if altq is enabled or there are
already packets in the ring (as we need to maintain packet order)
- update all drbr consumers
- fix drbr_flush
- avoid using the driver queue (IFQ_DRV_*) in the altq case as the
multiqueue consumer does not provide enough protection, serialize altq
interaction with the main queue lock
- make drbr_dequeue_cond work with altq
Discussed with: kmacy, yongari, jfv
MFC after: 4 weeks
no cleanwindows handler so just remove trying to trigger it from _start
and the AP trampoline code as that leads to a crash there. This should
be okay as leaking data from the OFW via the CPU registers on start of
the kernel should be no real concern.
- Make the comments of _start and the AP trampoline code regarding the
initializations they perform match each other and reality.
- Make the comments of the AP trampoline code regarding iTLB accesses
refer to the right macro.
OpenBSD and OpenSolaris do instead of fiddling with the MMUs ourselves.
Unlike direct access the firmware methods don't automatically use the
next free (?) TLB slot, instead the slot to be used has to be specified.
We allocate the TLB slots for the kernel top-down as OpenSolaris suggests
that the firmware will always allocate the ones for its own use bottom-up.
Besides being simpler, according to OpenBSD using the firmware methods is
required to allow booting on Sun Fire E10K with multi-systemboard domains.
of Sun Fire V1280 doesn't round up the size itself but instead lets
claiming of non page-sized amounts of memory fail.
- Change parameters and variables related to the TLB slots to unsigned
which is more appropriate.
- Search the whole OFW device tree instead of only the children of the
root nexus device for the BSP as starting with UltraSPARC IV the 'cpu'
nodes hang off of from 'cmp' (chip multi-threading processor) or 'core'
or combinations thereof. Also in large UltraSPARC III based machines
the 'cpu' nodes hang off of 'ssm' (scalable shared memory) nodes which
group snooping-coherency domains together instead of directly from the
nexus.
- Add support for UltraSPARC IV and IV+ BSPs. Due to the fact that these
are multi-core each CPU has two Fireplane config registers and thus the
module/target ID has to be determined differently so the one specific
to a certain core is used. Similarly, starting with UltraSPARC IV the
individual cores use a different property in the OFW device tree to
indicate the CPU/core ID as it no longer is in coincidence with the
shared slot/socket ID.
While at it additionally distinguish between CPUs with Fireplane and
JBus interconnects as these also use slightly different sizes for the
JBus/agent/module/target IDs.
- Check the return value of init_heap(). This requires moving it after
cons_probe() so we can panic when appropriate. This should be fine as
the PowerPC OFW loader uses that order for quite some time now.
- Update bpb structs with reserved fields.
- In direntry struct join deName with deExtension. Although a
fix was attempted in the past, these fields were being overflowed,
Now this is consistent with the spec, and we can now share the
WinChksum code with NetBSD.
Submitted by: Pedro F. Giffuni <giffunip tutopia com>
Mostly obtained from: NetBSD
Reviewed by: bde
MFC after: 2 weeks
kvm_nlist skips lookup for entries that have n_type != N_UNDF.
N_UNDF happens to be zero, so n_type typically has a correct
value by accident, but not always.
Note: jhb has a patch that replaces kvm_nlist use with direct
gdb parsing.
MFC after: 5 days
X-MFC-Note: unless jhb commits kvm_nlist => kgdb_parse change
pending blocks are scheduled for removal, goes to retry the (re)allocation,
clear the bp pointer. It might happen that meantime free space is really
exhausted and we are entering nospace: label without bread()ing buffer,
causing stale bp value to be brelse()d again.
Tested by: pho
(Producing a scenario to reliably reproduce the
race appeared to be much harder then fixing the bug)
MFC after: 1 week
this in the Sibyte PCI hostbridge driver instead.
The nexus driver sees resource allocation requests for memory and irq
resources only. These are legitimate resources on all MIPS platforms.
Suggested by: imp
- Kcachegrind (calltree) support with assembly/source
code mapping and call count estimator (-F).
- Top mode for calltree and callgraph plugin (-T).
MFC after: 1 month
It is belived that that pass s not needed anymore.
Specifically it is not required now for the reasons that were given
in the removed comment.
Discussed with: jhb
MFC after: 4 weeks
o Incorporate review comments:
- Properly reference and lock the map
- Take into account that the VM map can change inbetween requests
- Add the fileid and fsid attributes
Credits: kib@
Reviewed by: kib@
Some current systems dynamically load SSDT(s) when _PDC/_OSC method
of Processor is evaluated. Other devices in ACPI namespace may access
objects defined in the dynamic SSDT. Drivers for such devices might
have to have a rather high priority, because of other dependencies.
Good example is acpi_ec driver for EC.
Thus we attach to Processors as early as possible to load the SSDTs
before any other drivers may try to evaluate control methods.
It also seems to be a natural order for a processor in a device
hierarchy.
On the other hand, some child devices on acpi cpu bus need to access
other system resources like PCI configuration space of chipset devices,
so they need to be probed and attached rather late.
For this reason we probe and attach the cpu bus at
SI_SUB_CONFIGURE:SI_ORDER_MIDDLE SYSINIT level.
In the future this could be done more elegantly via multipass.
Please note that acpi drivers that might access ACPI namespace from
device_identify will do that before _PDC/_OSC of Processors are evaluated.
Legacy cpu driver is not affected by this change.
PR: kern/142561 (in part)
Reviewed by: jhb
Silence from: acpi@
MFC after: 5 weeks
