Test the $nr expansion in labels is correct, even if the optimiser
reduces the rule count.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D32489
We used to expand the $nr macro in labels into the rule number prior to
the optimisation step. This would occasionally produce incorrect rule
numbers in the labels.
Delay all macro expansion until after the optimisation step to ensure
that we expand the correct values.
MFC after: 1 week
Reported by: Özkan KIRIK <ozkan.kirik@gmail.com>
Differential Revision: https://reviews.freebsd.org/D32488
This patch adds a new argument to nfscl_tryclose() to indicate
whether or not it should loop when a NFSERR_DELAY reply is received
from the NFSv4 server. Since this new argument is always passed in
as "true" at this time, no semantics change should occur.
This is being done to prepare the code for a future patch that fixes
the case where an NFSv4.1/4.2 server replies NFSERR_DELAY to a Close
operation.
MFC after: 2 week
From https://github.com/PJK/libcbor:
libcbor is a C library for parsing and generating CBOR, the general-
purpose schema-less binary data format.
libcbor will be used by ssh to support FIDO/U2F keys. It is currently
intended only for use by ssh, and so is installed as a PRIVATELIB and is
placed in the ssh pkgbase package.
cbor_export.h and configuration.h were generated by the upstream CMake
build. We could create them with bmake rules instead (as NetBSD has
done) but this is a fine start.
This is currently disabled for the 32-bit library build as libfido2 is
not compatible with the COMPAT_32BIT hack in usb_ioctl.h, and there is
no need for libcbor without libfido2.
Reviewed by: kevans
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32347
In some cases when passing /dev/dspX.vpY as mixer devices, m->ci.longname and
m->ci.hw_info will be empty. Don't print any brackets and parentheses
in this case.
Differential Revision: https://reviews.freebsd.org/D32500
Submitted by: christos@
Sponsored by: NVIDIA Networking
Use the new kern.stacktop sysctl to retrieve the address of stack top
instead of kern.usrstack. kern.usrstack does not have any knowledge
of the stack gap, so this can cause problems with thread stacks.
Using kern.stacktop sysctl should fix most of those problems.
kern.usrstack is used as a fallback when kern.stacktop cannot be read.
Rename usrstack variables to stacktop to reflect this change.
Fixes problems with firefox and thunderbird not starting with
stack gap enabled.
PR: 239873
Reviewed by: kib
Obtained from: Semihalf
Sponsored by: Stormshield
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D31898
With stack gap enabled top of the stack is moved down by a random
amount of bytes. Because of that some multithreaded applications
which use kern.usrstack sysctl to calculate address of stacks for
their threads can fail. Add kern.stacktop sysctl, which can be used
to retrieve address of the stack after stack gap is applied to it.
Returns value identical to kern.usrstack for processes which have
no stack gap.
Reviewed by: kib
Obtained from: Semihalf
Sponsored by: Stormshield
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D31897
Calling setrlimit with stack gap enabled and with low values of stack
resource limit often caused the program to abort immediately after
exiting the syscall. This happened due to the fact that the resource
limit was calculated assuming that the stack started at sv_usrstack,
while with stack gap enabled the stack is moved by a random number
of bytes.
Save information about stack size in struct vmspace and adjust the
rlim_cur value. If the rlim_cur and stack gap is bigger than rlim_max,
then the value is truncated to rlim_max.
PR: 253208
Reviewed by: kib
Obtained from: Semihalf
Sponsored by: Stormshield
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D31516
Bhyve could emulate wrong PCI registers.
In the best case, the guest reads wrong registers and the device driver would
report some errors.
In the worst case, the guest writes to wrong PCI registers and could brick
hardware when using PCI passthrough.
According to Intels specification, low bits of CFGADR should be
ignored. Some OS like linux may rely on it. Otherwise, bhyve could
emulate a wrong PCI register.
E.g.
If linux would like to read 2 bytes from offset 0x02, following would
happen.
linux:
outl 0x80000002 at CFGADR
inw at CFGDAT + 2
bhyve:
cfgoff = 0x80000002 & 0xFF = 0x02
coff = cfgoff + (port - CFGDAT) = 0x02 + 0x02 = 0x04
Bhyve would emulate the register at offset 0x04 not 0x02.
Reviewed By: #bhyve, grehan
Differential Revision: https://reviews.freebsd.org/D31819
Sponsored by: Beckhoff Automation GmbH & Co. KG
This patch factors the unlinking of the nfsclopen structure out of
nfscl_freeopen() into a separate function called nfscl_unlinkopen().
It also adds a new argument to nfscl_freeopen() to conditionally do
the unlink. Since this new argument is always passed in as "true"
at this time, no semantics change should occur.
This is being done to prepare the code for a future patch that fixes
the case where an NFSv4.1/4.2 server replies NFSERR_DELAY to a Close
operation.
MFC after: 2 week
Run ktls_init() when the first KTLS session is created rather than
unconditionally during boot. This avoids creating unused threads and
allocating unused resources on systems which do not use KTLS.
Reviewed by: gallatin, markj
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D32487
Previously the body of ktls_tick was a nop when NIC TLS was disabled,
but the callout was still scheduled consuming power on otherwise-idle
systems with Chelsio T6 adapters. Now the callout only runs while NIC
TLS is enabled on at least one interface of an adapter.
Reported by: mav
Reviewed by: np, mav
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D32491
As Radix MMU with superpages enabled is now stable, make it the
default choice on supported hardware (POWER9 and above), since its
performance is greater than that of HPT MMU.
Reviewed by: alfredo, jhibbits
Sponsored by: Instituto de Pesquisas Eldorado (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D30797
Reduce traffic to doorbell register when processing multiple completion
events at once. Only write it at the end of the loop after we've
processed everything (assuming we found at least one completion,
even if that completion wasn't valid).
Sponsored by: Netflix
Reviewed by: mav
Differential Revision: https://reviews.freebsd.org/D32470
Current implementation of Radix MMU doesn't support mapping
arbitrary virtual addresses, such as the ones generated by
"direct mapping" I/O addresses. This caused the system to hang, when
early I/O addresses, such as those used by OpenFirmware Frame Buffer,
were remapped after the MMU was up.
To avoid having to modify mmu_radix_kenter_attr just to support this
use case, this change makes early I/O map use virtual addresses from
KVA area instead (similar to what mmu_radix_mapdev_attr does), as
these can be safely remapped later.
Reviewed by: alfredo (earlier version), jhibbits (in irc)
MFC after: 2 weeks
Sponsored by: Instituto de Pesquisas Eldorado (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D31232
"rm-style" system calls such as kern_frmdirat() and kern_funlinkat()
don't supply SAVENAME to preserve the pathname buffer for subsequent
vnode ops. For unionfs this poses an issue because the pathname may
be needed for a relookup operation in unionfs_remove()/unionfs_rmdir().
Currently unionfs doesn't check for this case, leading to a panic on
DIAGNOSTIC kernels and use-after-free of cn_nameptr otherwise.
The unionfs node's stored buffer would suffice as a replacement for
cnp->cn_nameptr in some (but not all) cases, but it's cleaner to just
ensure that unionfs vnode ops always have a valid cn_nameptr by setting
SAVENAME in unionfs_lookup().
While here, do some light cleanup in unionfs_lookup() and assert that
HASBUF is always present in the relevant relookup calls.
Reported by: pho
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D32148
Without this change, unmounting smbfs filesystems with an INVARIANTS
kernel would panic after 10e64782ed.
Found by: markj
Reviewed by: markj, jhb
Obtained from: CheriBSD
MFC after: 3 days
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D32492
rarpd.c was modified in r19859 to use REVARP_REQUEST instead of
ARPOP_REVREQUEST.
PR: 183333
MFC after: 3 days
Reported by: pluknet <pluknet@gmail.com>
Without this patch, if a pNFS read layout has already been acquired
for a file, writes would be redirected to the Metadata Server (MDS),
because nfscl_getlayout() would not acquire a read/write layout for
the file. This happened because there was no "mode" argument to
nfscl_getlayout() to indicate whether reading or writing was being done.
Since doing I/O through the Metadata Server is not encouraged for some
pNFS servers, it is preferable to get a read/write layout for writes
instead of redirecting the write to the MDS.
This patch adds a access mode argument to nfscl_getlayout() and
nfsrpc_getlayout(), so that nfscl_getlayout() knows to acquire a read/write
layout for writing, even if a read layout has already been acquired.
This patch only affects NFSv4.1/4.2 client behaviour when pNFS ("pnfs" mount
option against a server that supports pNFS) is in use.
This problem was detected during a recent NFSv4 interoperability
testing event held by the IETF working group.
MFC after: 2 week
TLS 1.0 records are encrypted as one continuous CBC chain where the
last block of the previous record is used as the IV for the next
record. As a result, TLS 1.0 records cannot be encrypted out of order
but must be encrypted as a FIFO.
If the later pages of a sendfile(2) request complete before the first
pages, then TLS records can be encrypted out of order. For TLS 1.1
and later this is fine, but this can break for TLS 1.0.
To cope, add a queue in each TLS session to hold TLS records that
contain valid unencrypted data but are waiting for an earlier TLS
record to be encrypted first.
- In ktls_enqueue(), check if a TLS record being queued is the next
record expected for a TLS 1.0 session. If not, it is placed in
sorted order in the pending_records queue in the TLS session.
If it is the next expected record, queue it for SW encryption like
normal. In addition, check if this new record (really a potential
batch of records) was holding up any previously queued records in
the pending_records queue. Any of those records that are now in
order are also placed on the queue for SW encryption.
- In ktls_destroy(), free any TLS records on the pending_records
queue. These mbufs are marked M_NOTREADY so were not freed when the
socket buffer was purged in sbdestroy(). Instead, they must be
freed explicitly.
Reviewed by: gallatin, markj
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D32381
An IPv4 address is embedded into an ifaddr which is freed
via epoch. And the in_ifaddrhead is already a CK list. Use
the network epoch to protect against use after free.
Next step would be to CK-ify the in_addr hash and get rid of the...
Reviewed by: melifaro
Differential Revision: https://reviews.freebsd.org/D32434
To implement -o emptydir, vfs_emptydir() checks that the passed
directory is empty. This should be done after checking whether the
vnode is of type VDIR, though, or vfs_emptydir() may end up calling
VOP_READDIR on a non-directory.
Reported by: syzbot+4006732c69fb0f792b2c@syzkaller.appspotmail.com
Reviewed by: kib, imp
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32475
This has the effect of installing the same file twice at the same location
and confuse pkgbase as we add this file twice in the package config part.
MFC after: 1 week
Sponsored by: Beckhoff Automation GmbH & Co. KG
Similar to the existing functions for strings and ints, this lets us
simplify some of the nvlist conversion code.
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC ("Netgate")
Prior to 021385aba5, MK_CLANG=no was sufficient to avoid descending
into lib/clang, but the referenced change added a couple of other
enabling knobs. Turn those off, too, to continue avoiding libllvm.
With this change, we no longer end up with a libllvm using the wrong
default target triple; `poudriere jail -cx` works once again.
Reported by: bhughes, imp, probably others
Fixes: 021385aba5 ("Add WITH_LLVM_BINUTILS to install LLVM ...")
Let's make it clear to users that -k is for configuration files.
Also, point to bhyve_config(5) in the paragraph describing the flag.
Reviewed by: jhb
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D32467
to ignore lack of execute permission on the binary. The check is a
bad security theatre anyway.
Reviewed by: arichardson, imp
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D32464
Without this patch, it is possible to hang the NFSv4 client,
when a rename/remove is being done on a file where the client
holds a delegation, if pNFS is being used. For a delegation
to be returned, dirty data blocks must be flushed to the NFSv4
server. When pNFS is in use, a shared lock on the clientID
must be acquired while doing a write to the DS(s).
However, if rename/remove is doing the delegation return
an exclusive lock will be acquired on the clientID, preventing
the write to the DS(s) from acquiring a shared lock on the clientID.
This patch stops rename/remove from doing a delegation return
if pNFS is enabled. Since doing delegation return in the same
compound as rename/remove is only an optimization, not doing
so should not cause problems.
This problem was detected during a recent NFSv4 interoperability
testing event held by the IETF working group.
MFC after: 1 week
In the situation with limited address space, together with
fragmentation, it is possible for mmap() request in morecore() to fail
when asking for required size + NPOOLPAGES, but succeed without the
addend. Retry allocation there.
PR: 259076
Reported by: Denis Koreshkov <dynamic-wind@mail.ru>
Reviewed by: arichardson
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D32474
Create the initial pool of kprocs on demand when the first socket AIO
request is submitted instead. The pool of kprocs used for other AIO
requests is similarly created on first use.
Reviewed by: asomers
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D32468
This partially reverts e81e77c5a0, leaving the option both in
GENERICs on amd64/arm64/arm, and in global NOTES file. Apparently
this better matches existing practice, where we do not try to hard
to make LINT and GENERIC complimentary.
Requested and reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
