Redo expari() like evalvar(). This makes the logic more understandable and
avoids possible problems if arithmetic expansion occurs if CTLESC characters
are not generated (looking backwards for CTLARI is not generally possible in
that case but the old code tried anyway).
This adds an extra argstr() recursion.
print a warning if EPERM is returned as this is an expected failure
mode rather than error -- similar to current handling of ESRCH.
This makes the output of 'procstat -as' vastly more palatable.
MFC after: 3 days
Sponsored by: DARPA, AFRL
(pvid=1) and we already configure them to send to other ports.
Setting pvid=portnum would mean that there were separate vlangroups
for each ports, but 'leaking' into other ports. The result? All port
traffic flooded to all other port traffic.
Tested:
* DB120, AR9344 + AR8327 switch
The OpenWRT AR8xxx switch support flushes the ATU (address translation
unit) after each port link 'up' status change. I've modified this to
just flush on any port transition.
Whilst here, bump the number of ports on the AR8327 to 6, rather than
the default of 5. It's DB120 specific; I'll go and make this configurable
later.
There's some debugging code in here still; I am still debugging whether
this is or isn't working fully.
Tested:
* DB120, AR9344 + AR8327 switch
Obtained from: OpenWRT
so there is no reason to assert that we won't hit an error. Instead,
just return that error to caller and have the upper layer handle it.
Obtained from: FreeNAS
Reported by: rodrigc
Reviewed by: Matthew Ahrens
MFC after: 2 weeks
concatenates the DOF tables into one section. Previously, the USDT init
code in drti.o would only look at the first table in the DOF section; with
this change, it iterates over all the tables, passing each DOF table to
the kernel.
PR: 186821
Submitted by: Fedor Indutny <fedor@indutny.com>
MFC after: 1 month
by having uboot_autoload() do the fdt setup (which may load a file) rather
than waiting until we're actually in the process of launching the kernel.
As part of making this happen...
- Define LOADER_FDT_SUPPORT on the uboot/lib compile command line when
MK_FDT is set.
- Make fdt_setup_fdtb() public.
- Declare public fdt_whatever() functions in a header instead of using
scattered extern decls in .c files.
This patch does four things:
* it globally disables mirroring;
* it globally sets the mirroring on each port to be disabled;
* the initial port setup now programs a portmask for the port to allow
transmission (forwarding) to all other ports bar itself;
* the vlan setup path now programs the portmask for the port to
allow transmission (forwarding) to all other ports bar itself.
Before this, I hard-coded the portmask to 0x3f which would mean all
ports (bar port 6, which currently isn't hooked up to anything.)
This means that traffic would be duplicated back out the port it
received it. I bet this wasn't .. optimal.
In any case, this _seems_ to make DHCP from my macosx laptop
work through this access point. I'll do some further testing
to ensure it's actually working correctly on all my devices.
Tested:
* DB120, AR8327 switch
In certain situations when creating an authorized_key file on a Linux machine
restorecon(1) may need to be called. Therefore, attempt to run it if it exists.
MFC After: 1 week
Idea from: https://bugzilla.redhat.com/show_bug.cgi?id=739989
being updated outside of the vcpu_lock(). The race is benign and could
potentially result in a missed notification about a pending interrupt to
a vcpu. The interrupt would not be lost but rather delayed until the next
VM exit.
The vcpu's hostcpu is now updated concurrently with the vcpu state change.
When the vcpu transitions to the RUNNING state the hostcpu is set to 'curcpu'.
It is set to 'NOCPU' in all other cases.
Reviewed by: grehan
To help avoid confusion: when attempting to send a key file check to see if a
file of the same name exists with a '.pub' suffix and send that instead. This
mimics the behavior of other ssh-copy-id scripts.
Add -v passthrough.
Reported by: dweimer <dweimer@dweimer.net>
Reported by: feld
MFC After: 1 week
It turns out that there's a variant format of the RX statisitcs notification
from the intel firmware. It's even more whacked - the non-BT variant has
bluetooth fields; apparently some later NICs return even _more_ bluetooth
related fields.
I'll commit the statistics structure changes here - it's a no-op for the
driver. I'll later teach the driver code to populate a statistics structure
from the received message after reformatting things correctly.
I don't _think_ it's going to fix anything related to sensitivity programming
as the CCK/OFDM (non-11n) fields are in the same place for both formats.
But the HT structure and the general statistics aren't in the same place.
I'll go find some NIC(s) that spit out the other format and when I find one,
I'll go and update the driver to handle things correctly.
Tested:
* Intel 5100 (which returns the legacy, non-BT format)
Obtained from: Linux iwlwifi
Consistently use a single tab after a #define as mentioned in style(9).
Use tabs instead of space for indenting.
Fix a typo: "hash_vesion".
No functional change.
MFC after: 3 days
