had been replied, the reply was always delivered to the originator
synchronously.
With introduction of netgraph item callbacks and a wait channel with
mutex in ng_socket(4), we have fixed the problem with ngctl(8) returning
earlier than the command has been proceeded by target node. But still
ngctl(8) can return prior to the reply has arrived to its node.
To fix this:
- Introduce a new flag for netgraph(4) messages - NGM_HASREPLY.
This flag is or'ed with message like NGM_READONLY.
- In netgraph userland library if we have sent a message with
NGM_HASREPLY flag, then select(2) until reply comes.
- Mark appropriate generic commands with NGM_HASREPLY flag,
gathering them into one enum {}. Bump generic cookie.
when checking whether it's greater than a struct stat st_size in order
to also catch the case when st_size is -1. Previously this check didn't
trigger on sparc64 when st_size is -1 (as it's the case for a file on
a bzipfs, TFTP server etc.), causing the content of the linker hints
file to be copied to memory referenced by a null-pointer.
PR: 91231
MFC after: 1 week
operands are consumed so use the appropriate constraint modifier.
Before this change GCC used one register for both an input and an
unrelated output operand of in_addword(), causing the input to be
overwritten before it was consumed and thus breaking in_addword().
For in_cksum_hdr() and in_pseudo() this change is more or less
cosmetic.
- Fix a misspelling in a nearby comment.
Reported & tested by: yongari
MFC after: 1 week
The minimum / maximum speed was way too low / high!
minspeed = 2000 - is this for real ?
maxspeed = 767999 - is this for real ?????
Wrap everything into 8000 - 48000 boundary, just to be safe.
MFC after: 3 days
Correct insecure temporary file usage in ee. [06:02]
Correct a race condition when setting file permissions, sanitize file
names by default, and fix a buffer overflow when handling files
larger than 4GB in cpio. [06:03]
Fix an error in the handling of IP fragments in ipfw which can cause
a kernel panic. [06:04]
Security: FreeBSD-SA-06:01.texindex
Security: FreeBSD-SA-06:02.ee
Security: FreeBSD-SA-06:03.cpio
Security: FreeBSD-SA-06:04.ipfw
- Mark MPSAFE since most of the locking procedures already implemented.
- Turn on inverted external amplifier sense flag for selected boards.
Tested by: bland
MFC after: 1 week
attempted to cast a struct ifnet to a struct fw_com which resulted in
data corruption.
PR: kern/91307
Submitted by: Alex Semenyaka <alex at semenyaka do ru>
MFC After: 6 days
operations before returning. Point the bus at a dummy cam_sim
structure so that any CCBs will complete immediately with a
CAM_DEV_NOT_THERE status, and ensure that any xpt_schedule() calls
on the bus's devices will immediately call the peripheral's
periph_start() routine. Also repeat the async messages because
devices that were part of the way through being probed may appear
after the original AC_LOST_DEVICE was sent, and would otherwise
never go away.
These changes make it possible to deregister a bus and free the SIM
at most stages during bus probing without the usual crashes in
camisr(). In particular, plugging in a umass device and then
unplugging it as soon as the first probe messages appeared would
almost always result in a crash. Now the device just goes away with
a few CAM errors and all references to the CAM bus, target and
device are dropped correctly.
- Only update the rx ring consumer pointer after running through the rx loop,
not with each iteration through the loop.
- If possible, use a fast interupt handler instead of an ithread handler. Use
the interrupt handler to check and squelch the interrupt, then schedule a
taskqueue to do the actual work. This has three benefits:
- Eliminates the 'interrupt aliasing' problem found in many chipsets by
allowing the driver to mask the interrupt in the NIC instead of the
OS masking the interrupt in the APIC.
- Allows the driver to control the amount of work done in the interrupt
handler. This results in what I call 'adaptive polling', where you get
the latency benefits of a quick response to interrupts with the
interrupt mitigation and work partitioning of polling. Polling is still
an option in the driver, but I consider it orthogonal to this work.
- Don't hold the driver lock in the RX handler. The handler and all data
associated is effectively serialized already. This eliminates the cost of
dropping and reaquiring the lock for every receieved packet. The result
is much lower contention for the driver lock, resulting in lower CPU usage
and lower latency for interactive workloads.
The amount of work done in the taskqueue is controlled by the sysctl
dev.em.N.rx_processing_limit
and tunable
hw.em.rx_process_limit
Setting these to -1 effectively removes the limit.
The fast interrupt and taskqueue can be disabled by defining NO_EM_FASTINTR.
This work has been shown to increase fast-forwarding from ~570 kpps to
~750 kpps (note that the same NIC hardware seems unable to transmit more than
800 kpps, so this increase appears to be limited almost solely by the
hardware). Gains have been shown in other workloads, ranging from better
performance to elimination of over-saturation livelocks.
Thanks to Andre Opperman for his time and resources from his network
performance project in performing much of the testing. Thanks to Gleb
Smirnoff and Danny Braniss for their help in testing also.
to COMPAT_43TTY.
Add COMPAT_43TTY to NOTES and */conf/GENERIC
Compile tty_compat.c only under the new option.
Spit out
#warning "Old BSD tty API used, please upgrade."
if ioctl_compat.h gets #included from userland.
Instead of dragging the entire ICH4/82801DB into this mess, select
only few boards based on pci subdevice / subvendor.
Tested by: Daisuke Orikasa <luxury-acura-3.5rl at nifty.com>
MFC after: 3 days
fast taskqueues. The following have been added:
TASKQUEUE_FAST_DEFINE() - create a global task queue.
an arbitrary execution context.
TASKQUEUE_FAST_DEFINE_THREAD() - create a global taskqueue that uses a
dedicated kthread.
taskqueue_create_fast() - create a local/private taskqueue.
These are all complimentary of the standard taskqueue functions. They are
primarily useful for fast interrupt handlers that can only use spinlock for
synchronization.
I personally think that the taskqueue API is starting to get too narrow and
hairy, but fixing it will require a major redesign on the API. Such a
redesign would be good but would break compatibility with FreeBSD 6.x, so
it really isn't desirable at this time.
Submitted by: sam
This is based on MCPC USB mobile phone guide line (MCPC-GL005)
Some other 3G system or so will work with this driver.
Kyocera PHS terminal (a.k.a. Kyopon) is known to work, which
is now supported by umodem(4) driver.
o record tsf in tx+rx frames
o switch from raw rssi to dbm for signal data and record both
signal and noise floor data (hacked for now to assume a fixed
noise floor; is correct with new hal)
o add monpass sysctl to control which rx'd frames are passed
up with errors; especially useful to see frames with CRC errors
o mark 'd packets w/ a CRC error with radiotap's BADFCS flag
Also add placeholder code for calibrating the noise floor when
using newer hals.
Reviewed by: avatar
MFC after: 1 week
param.h. Per request, I've placed these just after the
_NO_NAMESPACE_POLLUTION ifndef. I've not renamed anything yet, but
may since we don't need the __.
Submitted by: bde, jhb, scottl, many others.
CAM_LUN_INVALID or CAM_TID_INVALID. Retries were being triggered
here when a umass device was unplugged, and while the retries
themselves are probably harmless, they complicated finding the real
SIM removal problems.
the names of directories to include in the base ldconfig script.
This will eliminate the need for each port to install its own
boot script which does nothing but ldocnfig a given directory.
This code was developed by flz (ports committer), discussed on
freebsd-rc@, and modified slightly by me.
Submitted by: flz
Reviewed by: brooks
better, I discovered sn doing too many pointer dereferences. This
driver would do silly things like:
sn_foo(struct ifnet *ifp)
{
struct sn_softc *sc = ifp->if_softc;
sc->ifp->mumble
/* Other stuff */
}
while /* other stuff */ usually needed sc, the extra deref isn't
needed. Eliminate a few dozen of them.
and subsequently broke the build. This change is supposed to fix the
case where doing a mtx_destroy() off a spin mutex while you hold it fails.
If it had been tested I would just leave it in, but it hasn't been tested
yet, so it will have to wait until later.
to old-style signals, to be the DAR register for DSI miss exceptions.
This gives the address of the access rather than the instruction
address. The behaviour is now the same as on i386.
Found by: libsigsegv tests
defined to return an int, but on LP64 platforms the return value of
FD_ISSET() for file descriptors with a bit-index larger than 31 would
not fit an int (due to __fd_mask being defined as an unsigned long).
The fix is to explicitly test against 0.
PR: ia64/91421
Submitted by: Tanaka Akira (akr at m17n dot org)
MFC after: 1 week
modules would have overlapping names.
- Only create /dev/si_control for unit 0.
Tested by: Joerg Lehners Joerg dot Lehners at informatik dot
uni-oldenburg dot de (on 6.x)
MFC after: 1 week
various pcib drivers to use their own private devclass_t variables for
their modules.
- Use the DEFINE_CLASS_0() macro to declare drivers for the various pcib
drivers while I'm here.
struct sx). Instead of storing a direct pointer to a our lock_class
struct in lock_object, reserve 4 bits in the lo_flags field to serve as an
index into a global lock_classes array that contains pointers to the lock
classes. Only debugging code such as WITNESS or INVARIANTS checks and KTR
logging need to access the lock_class member, so this shouldn't add any
overhead to production kernels. It might add some slight overhead to
kernels using those debug options however.
As with the previous set of changes to lock_object, this is going to
completely obliterate the kernel ABI, so be sure to recompile all your
modules.
doesn't have any actual interrupts is listed in a _PRT entry, only print
a warning rather than panic'ing when we walk the _PRT's to build up count
of entries that reference a given link (the counts are used as weights so
that we can attempt to balance the load across IRQs used by link devices).
Instead, only panic if we attempt to use the _PRT entry to route an
interrupt for a device.
PR: i386/89545
Tested by: anders
- MPSAFE
- Fix / reorganize attach routine. Device specific initialization must
be done after generic bus / DMA setup. At last, Virtual Channels
(vchan) works as expected.
Note: Recent commit / fix against this driver proves that major enhancements
on the generic sound layer does indeed help to expose flaw within
device specific code. There are probably other drivers that need to
be addressed as well.
Tested by: barner
MFC after: 1 week
that NetBSD implemented it independently of them (don't know which one
was actually first). This saves about 24k for those times you don't
need snapshot support (like when running off a ram disk, or in an
embedded environment where size matters).
returns EBADF. That errno is correct and is mandated by POSIX. It also
goes back to revision 1.1 of our CVS history (i.e. 4.4BSD).
The _fget() function should probably also be upated as it currently returns
EINVAL in that case rather than EBADF. (It does return EBADF for reads
on a write-only descriptor without any XXX comments oddly enough.)
Discussed with: scottl, grog, mjacob, bde
ifm_status and ifm_active. IFM_10_T gets set in the ifm_active field,
not in the ifm_status field, as far as I can tell.
Note: this was to enable a workaround that's rarely enabled. I don't know
how to corrupt my eeprom to test it, and would rather not know...
- Remove a conditional in the AMD cache detection, it's always false. [2]
- Don't try to detect a cache if only compiled for i386.
Analyzed by: Antoine Brodin <antoine.brodin@laposte.net> [1]
Submitted by: Antoine Brodin <antoine.brodin@laposte.net> [2]
that a file's atime and mtime are only set to correct fractional
second values (0-999999000ns with the current interface).
Prior to this change users could create files with values outside
that range. Moreover, on 32-bit machines tv_usec offsets larger than
4.3s would result in an unnormalized AND wrong timestamp value,
due to overflow.
MFC after: 1 week
success instead of EOPNOTSUPP when being loaded. Secondly, if there are no
ibcs2 processes running when a MOD_UNLOAD request is made, break out to
return success instead of falling through into the default case which
returns EOPNOTSUPP. With these fixes, I can now kldload and subsequently
kldunload the ibcs2 module.
PR: kern/82026 (and several duplicates)
Reported by: lots of folks
MFC after: 1 week
signal is received during the msleep, the msleep is retried
indefinitely as it just keeps returning ERESTART because of
the pending signal.
Instead, just don't PCATCH - the signal can wait.
Sponsored by: Sophos/ActiveState
requiried to keep consistent softc state before/after callback function
invocation and supposed to be sligntly faster than previous one as it
wouldn't incur callback overhead. With this change callback function
was gone.
- Decrease TI_MAXTXSEGS to 32 from 128. It seems that most mbuf chain
length is less than 32 and it would be re-packed with m_defrag(9) if
its chain length is larger than TI_MAXTXSEGS. This would protect ti(4)
against possible kernel stack overflow when txsegs[] is put on stack.
Alternatively, we can embed the txsegs[] into softc. However, that
would waste memory and make Tx/Rx speration hard when we want to
sperate Tx/Rx handlers to optimize locking.
- Fix dma map tracking used in Tx path. Previously it used the dma map
of the last mbuf chain in ti_txeof() which was incorrect as ti(4)
used dma map of the first mbuf chain when it loads a mbuf chain with
bus_dmamap_load_mbuf(9). Correct the bug by introducing queues that
keep track of active/inactive dma maps/mbuf chain.
- Use ti_txcnt to check whether driver need to set watchdog timer instead
of blidnly clearing the timer in ti_txeof().
- Remove the 3rd arg. of ti_encap(). Since ti(4) now caches the last
descriptor index(ti_tx_saved_prodidx) used in Tx there is no need to
pass it as a fuction arg.
- Change data type of producer/consumer index to int from u_int16_t in
order to remove implicit type conversions in Tx/Rx handlers.
- Check interface queue before getting a mbuf chain to reduce locking
overhead.
- Check number of available Tx descriptores to be 16 or higher in
ti_start(). This wouldn't protect Tx descriptor shortage but it would
reduce number of bus_dmamap_unload(9) calls in ti_encap() when we are
about to running out of Tx descriptors.
- Command NIC to send packets ony when the driver really has packets
enqueued. Previously it always set TI_MB_SENDPROD_IDX which would
command NIC to DMA Tx descriptors into NIC local memory regardless
of Tx descriptor changes.
Reviewed by: scottl
allocating a resource that's in the card itself.
Remove more now-redundant resource_list_add, and now-redunant code
that lives in the pci layer.
# This fixes the atheros card that I have which had its CIS in one of
# the BARs. Don't know yet if this fixes the amd64 issues reported.
particular this fixes use of wme in adhoc demo mode, it wasn't possible
to set the txop limit because the aggressive mode logic would override
Reviewed by: apatti
MFC after: 2 weeks
the year bump.
# If we behaved like book publishers, we'd do this in July. I can't find
# a good reference for why they do it then, but it has been explained to
# me that copyrights in the last 1/2 of the year expire as if they were
# published in the following year. I can't confirm this info, but if you
# have a pointer, please send it to me.
- provide an interface (macros) to the page coloring part of the VM system,
this allows to try different coloring algorithms without the need to
touch every file [1]
- make the page queue tuning values readable: sysctl vm.stats.pagequeue
- autotuning of the page coloring values based upon the cache size instead
of options in the kernel config (disabling of the page coloring as a
kernel option is still possible)
MD changes:
- detection of the cache size: only IA32 and AMD64 (untested) contains
cache size detection code, every other arch just comes with a dummy
function (this results in the use of default values like it was the
case without the autotuning of the page coloring)
- print some more info on Intel CPU's (like we do on AMD and Transmeta
CPU's)
Note to AMD owners (IA32 and AMD64): please run "sysctl vm.stats.pagequeue"
and report if the cache* values are zero (= bug in the cache detection code)
or not.
Based upon work by: Chad David <davidc@acns.ab.ca> [1]
Reviewed by: alc, arch (in 2004)
Discussed with: alc, Chad David, arch (in 2004)
security.mac.biba.interfaces_equal
If non-zero, all network interfaces be created with the label:
biba/equal(equal-equal)
This is useful where programs which initialize network interfaces
do not have any labeling support. This includes dhclient and ppp. A
long term solution is to add labeling support into dhclient(8)
and ppp(8), and remove this variable.
It should be noted that this behavior is different then setting the:
security.mac.biba.trust_all_interfaces
sysctl variable, as this will create interfaces with a biba/high label.
Lower integrity processes are not able to write to the interface in this
event. The security.mac.biba.interfaces_equal will override
trust_all_interfaces.
The security.mac.biba.interfaces_equal variable will be set to zero
or disabled by default.
MFC after: 2 weeks
USB HID device that allows to plug two PS2 controllers. This specific
device doesn't work yet but will as soon as we support devices with
multiple report IDs.
MFC after: 3 days
broken report descriptor. While I'm here, make all the other report
descriptors const to match the newly added one.
Obtained from: NetBSD
MFC after: 1 week
lack a report descriptor and don't use the standard interface class.
This patch works around these deficiencies so that the uhid(4) driver
can recognize and use those broken devices.
PR: usb/90141
Submitted by: Ed Schouten <ed@fxq.nl> (with minor mods from me)
MFC after: 1 week
force allocation of unallocated BARs (cardbus uses this to preallocate
everything). Add a prefetchmask to allow for busses that get prefetch
hints to set them. Addjust pci_add_map and pci_ata_maps to take a new
force flag which pci_add_resources will pass in. Implement 'force' in
pci_add_map. Write new value of allocated resource into the bar, if
the allocation succeeded (we should have done this before, but with
the new force the bug was very obvious).
- Provide tunable vm.memguard.desc, so one can specify memory type without
changing the code and recompiling the kernel.
- Allow to use memguard for kernel modules by providing sysctl
vm.memguard.desc, which can be changed to short description of memory
type before module is loaded.
- Move as much memguard code as possible to memguard.c.
- Add sysctl node vm.memguard. and move memguard-specific sysctl there.
- Add malloc_desc2type() function for finding memory type based on its
short description (ks_shortdesc field).
- Memory type can be changed (via vm.memguard.desc sysctl) only if it
doesn't exist (will be loaded later) or when no memory is allocated yet.
If there is allocated memory for the given memory type, return EBUSY.
- Implement two ways of memory types comparsion and make safer/slower the
default.
This should reduce huge playback / recording latency for
applications that try to act smarter and manage their own
buffering (XMMS, Skype, etc.).
Note to Skype + via8xxx users: Remove previous hackish
"hint.pcm.<unit>.via_dxs_disabled" from kernel hint and see
whether this changes cure all those annoying sound issues.
but broke handling of the turboG channel; since we aren't ready to revamp
the channel list just check for turboA channels for now so channel 6 is
considered in auto mode
Noticed by: gibbs
try very hard to be perfect. However, these attempts broke down when
there were large numbers of resources. We'd not be able to map them all.
Instead, accept that we might pass more range to thse subbus than
might be optimal be able to compute. However, there's little harm in
this and it allows us to pass greater resources through.
# it has been suggested that we allocate a fixed amount of resources
# on attach and give it out upon request. This might not be a bad idea...
The race is very real, but conditions needed for triggering it are rather
hard to meet now.
When gjournal will be committed (where it is quite easy to trigger) we need
to fix it.
For now, verify if it is really hard to trigger.
Discussed with: kan
of msleep(). msleep_spin() doesn't support changing the priority of the
thread while it is asleep nor does it support interruptible sleeps (PCATCH)
or the PDROP flag. It does support timeouts however. It differs from
msleep() in that the passed in mutex is a spin mutex. This means one can
use msleep_spin() and wakeup() with a spin mutex similar to msleep() and
wakeup() with a regular mutex. Note that the spin mutex in question needs
to come before sched_lock and the sleepq locks in lock order.
spin locks that are not in the static order list. It is not safe to call
printf while holding the witness spin mutex since the console drivers that
back printf may need to use their own spin locks which would try to talk
to witness when they were locked. Given this, it is possible for one
CPU to lock a console driver lock (such as sio) which then tries to lock
the witness lock while another CPU is doing the printf while holding the
witness lock. Fix this by moving the printf outside of the witness lock.
All other printf's in witness are already correct.
MFC after: 3 days
ETHERTYPE_IPV6 frames. Change this to be a sysctl knob so that is able to still
bridge non-IP packets if desired.
Also return early if all pfil_* sysctls are turned off, the user obviously does
not want to filter on the bridge.
cardbus_cis.c to this file, some code was not merged and thus resource
list entries were invalid. They didn't have a resources attached to
them.
However, the problem was masked for some time later, because newer
resources list entries were added to the head of the list, and
resource_list_find() always returned the first matching resource list
entry. Usually the underlying driver allocated a valid resource and
added it to the head of the list, and invalid one wasn't used.
In rev. 1.174 of subr_bus.c the sorting of resource list entries was
reversed demasking the problem in cardbus_alloc_resources().
This commit fixes the problem returning back some code from
cardbus_cis.c, pre-1.49 revisions.
PR: kern/87114
PR: kern/90441
Hardware provided by: Vasily Olekhov <olekhov yandex.ru>
Reviewed by: imp
. remove unnecessay header files after Scott's bus_dma(9) commit.
. remove global variable tis which was introduced at the time of
zero_copy(9) changes. The variable tis was not used at all. The
same applyes to ti_links in softc so axe it.
. deregister variables.
. axe ti_vhandle and switch to use explicit register access for
accessing NIC local memory. Creates three variants of ti_mem to
read/write NIC local memory(ti_mem_read, ti_mem_write) and clearing
NIC local memory(ti_mem_zero). This greatly enhances code
readability and have ti(4) drop using shared memory scheme for
Tigon 1. As Tigon 1 switched to use explicit register access for Tx,
axe ti_tx_ring_nic/ti_cmd_ring in softc.(Tigon 2 used to host ring
scheme which means there is no need to access NIC local memory via
register access for Tx and NIC would DMA the modified Tx rings into
its local memory.) [1]
. introduce new macro TI_EVENT_*/TI_CMD_* to handle NIC envent/command.
Instead of using bit fields assginment for accessing the event, use
shift operations to set/get it. [1]
. add additional check for valid DMA tags in ti_free_dmamaps().
. add missing bus_dmamap_sync/bus_dmamap_unload in ti_free_*_ring_*.
. fix locking nits(MTX_RECURSE mutex) and make ti(4) MPSAFE.
. change data type of ti_rdata_phys to bus_addr_t and don't blindly
cast to uint32_t.
. rearrange detach path and make ti(4) survive during device detach.
. for Tigon 1, use explicit register access for checking Tx descriptors
in ti_encap()/ti_txeof(). [1]
. properly call bus_dmamap_sync(9) for updating statistics.
. remove extra semicolon in ti_encap()
. rewrite loading MAC address to work on strict-alignment architectures.
. move TI_RD_OFF macro to if_tireg.h
. axe ETHER_ALIGN as it's already defined in <net/ethernet.h>.
. make macros immuine from expansion by adding parenthesis and do-while.
. remove alpha specific hack as vtophys(9) is no longer used in ti(4)
after Scott's bus_dma(9) fix.
Reviewed by: scottl
Obtained from: OpenBSD [1]
UMA_SLAB_MALLOC flag.
In some circumstances (I observed it when I was doing a lot of reallocs)
UMA_SLAB_MALLOC can be set even if us_keg != NULL.
If this is the case we have wonderful, silent data corruption, because less
data is copied to the newly allocated region than should be.
I'm not sure when this bug was introduced, it could be there undetected
for years now, as we don't have a lot of realloc(9) consumers and it was
hard to reproduce it...
...but what I know for sure, is that I don't want to know who introduce
the bug:) It took me two/three days to track it down (of course most of
the time I was looking for the bug in my own code).
amd64_set_watch() as 'unsigned int' and 'unsigned int' is 32bit long on amd64.
Even with that fix hardware watchpoint don't work for me on amd64, ie. when
I set the watchpoint and write a byte there, nothing happens.
with flags bitfield and set BI_CAN_EXEC_DYN flag for all brands that usually
allow executing elf dynamic binaries (aka shared libraries). When it is
requested to execute ET_DYN elf image check if this flag is on after we
know the elf brand allowing execution if so.
PR: kern/87615
Submitted by: Marcin Koziej <creep@desk.pl>
"established" state.
Similar to OpenBSD's rev. 1.499 by joel but not breaking ABI.
Obtained from: OpenBSD (with changes)
Reported by: Bruno Afonso
MFC after: 3 days
X-MFC: together with local_flags
POSIX. This also makes the struct correct we ever implement an i386-time64
architecture. Not that we need too.
Reviewed by: imp, brooks
Approved by: njl (acpica), des (no objects, touches procfs)
Tested with: make universe
Specifically, it is required for the I/O that may be performed by
elfN_load_section().
Avoid an obscure deadlock in the a.out, elf, and gzip image
activators. Add a comment describing why the deadlock does not occur
in the common case and how it might occur in less usual circumstances.
Eliminate an unused variable from exec_aout_imgact().
In collaboration with: tegge
by debugger, e.g process is dumping core. Only access p_xthread if
P_STOPPED_TRACE is set, this means thread is ready to exchange signal
with debugger, print a warning if P_STOPPED_TRACE is not set due to
some bugs in other code, if there is.
The patch has been tested by Anish Mistry mistry.7 at osu dot edu, and
is slightly adjusted.
I'm holding off on building on sparc64 and others because I don't know
if this driver has had all the inb/outb removed (I think it has). Nor
do I know if there are byte ordering issues. There are very few word
operations on an NE2000, but I've not had time to audit them all.
Suggested by: Daniel O'Connor
handling code so the stack trace unwinders don't start trying to
go into user-space.
Found by trying to create core dumps with a KTR_COMPILE/KTR_GEOM
kernel, which results in a stack_save() call in the ast() coredump
path - this created a panic, and then calling 'trace' in ddb resulted
in the black screen of death after printing out most of the backtrace.
passing a pointer to an opaque clockframe structure and requiring the
MD code to supply CLKF_FOO() macros to extract needed values out of the
opaque structure, just pass the needed values directly. In practice this
means passing the pair (usermode, pc) to hardclock() and profclock() and
passing the boolean (usermode) to hardclock_cpu() and hardclock_process().
Other details:
- Axe clockframe and CLKF_FOO() macros on all architectures. Basically,
all the archs were taking a trapframe and converting it into a clockframe
one way or another. Now they can just extract the PC and usermode values
directly out of the trapframe and pass it to fooclock().
- Renamed hardclock_process() to hardclock_cpu() as the latter is more
accurate.
- On Alpha, we now run profclock() at hz (profhz == hz) rather than at
the slower stathz.
- On Alpha, for the TurboLaser machines that don't have an 8254
timecounter, call hardclock() directly. This removes an extra
conditional check from every clock interrupt on Alpha on the BSP.
There is probably room for even further pruning here by changing Alpha
to use the simplified timecounter we use on x86 with the lapic timer
since we don't get interrupts from the 8254 on Alpha anyway.
- On x86, clkintr() shouldn't ever be called now unless using_lapic_timer
is false, so add a KASSERT() to that affect and remove a condition
to slightly optimize the non-lapic case.
- Change prototypeof arm_handler_execute() so that it's first arg is a
trapframe pointer rather than a void pointer for clarity.
- Use KCOUNT macro in profclock() to lookup the kernel profiling bucket.
Tested on: alpha, amd64, arm, i386, ia64, sparc64
Reviewed by: bde (mostly)
if we need a valid MAC address (for probing the media for example) before
ether_ifattach() has been called since IF_LLADDR() is NULL then.
Tested by: tisco
except for BGE_CHIPID_BCM5700_B0, which is buggy.
- All bge(4) supported hardware, has a bug that produces incorrect checksums
on Ethernet runts. However, in case of a transmitted packet, the latter can
be padded with zeroes, and the checksum would be correct. (Probably chip
includes the pad data into checksum). In case of receive, we just don't
trust checksum data in received runts.
Obtained from: NetBSD (jonathan) via Mihail Balikov
Previously it always returned 0 which means success regardless of
EEPROM status.
While here, add a check whether EEPROM read is successful.
Submitted by: jkim
- removed unused funtion bge_handle_events().
- removed bus_dmamap_destroy(9) calls for DMA maps created by
bus_dmamem_alloc(9). This should fix panics seen on sparc64
in device detach.
- added check for parent DMA tag creation.
- switched to use __NO_STRICT_ALIGNMENT as bge(4) supports all
architectures.
- added missing bus_dmamap_sync(9) in bge_txeof().
- added missing bus_dmamap_sync(9) in bge_encap().
- corrected memory synchronization operation on status block.
As the driver just read status block that was DMAed by NIC it
should use BUS_DMASYNC_POSTREAD. Likewise the driver does not
need to write status block back, so remove unnecessary
bus_dmamap_sync(9) calls in bge_intr().
- corrected memory synchronization operation on RX return ring.
The driver only read the block so remove unnecessary
bus_dmamap_sync(9) in bge_rxeof().
- force bus_dmamap_sync(9) for only modified descriptors. Blindly
synching all desciptor rings would reduce performance.
- call bus_dmamap_sync(9) for DMA maps that were modified in bge_rxeof().
Reviewed by: jkim(initial version)
Tested by: glebius(i386), jkim(amd64 initial version)
interfaces to bridges, which will then send and receive IP protocol 97 packets.
Packets are Ethernet frames with an EtherIP header prepended.
Obtained from: NetBSD
MFC after: 2 weeks
it and reacquiring it in vrele(). Consequently, there is no reason to
increase the reference count on the vm object caching the file's pages.
Reviewed by: tegge
Eliminate unused parameters to elfN_load_file().
