Commit Graph

890 Commits

Author SHA1 Message Date
Jung-uk Kim
92488a5703 Catch up with ACPICA 20090903. 2009-09-11 22:49:34 +00:00
John Baldwin
2fcd493c4b Tweak the way that the ACPI and ISA bus drivers match hint devices to
BIOS-enumerated devices:
- Assume a device is a match if the memory and I/O ports match even if the
  IRQ or DRQ is wrong or missing.  Some BIOSes don't include an IRQ for
  the atrtc device for example.
- Add a hack to better match floppy controller devices.  Many BIOSes do not
  include the starting port of the floppy controller listed in the hints
  (0x3f0) in the resources for the device.  So far, however, all the BIOS
  variations encountered do include the 'port + 2' resource (0x3f2), so
  adjust the matching for "fdc" devices to look for 'port + 2'.

Reviewed by:	imp
MFC after:	3 days
2009-08-24 21:51:46 +00:00
John Baldwin
a56fe095f0 Temporarily revert the new-bus locking for 8.0 release. It will be
reintroduced after HEAD is reopened for commits by re@.

Approved by:	re (kib), attilio
2009-08-20 19:17:53 +00:00
Attilio Rao
444b91868b Make the newbus subsystem Giant free by adding the new newbus sxlock.
The newbus lock is responsible for protecting newbus internIal structures,
device states and devclass flags. It is necessary to hold it when all
such datas are accessed. For the other operations, softc locking should
ensure enough protection to avoid races.

Newbus lock is automatically held when virtual operations on the device
and bus are invoked when loading the driver or when the suspend/resume
take place. For other 'spourious' operations trying to access/modify
the newbus topology, newbus lock needs to be automatically acquired and
dropped.

For the moment Giant is also acquired in some key point (modules subsystem)
in order to avoid problems before the 8.0 release as module handlers could
make assumptions about it. This Giant locking should go just after
the release happens.

Please keep in mind that the public interface can be expanded in order
to provide more support, if there are really necessities at some point
and also some bugs could arise as long as the patch needs a bit of
further testing.

Bump __FreeBSD_version in order to reflect the newbus lock introduction.

Reviewed by:    ed, hps, jhb, imp, mav, scottl
No answer by:   ariff, thompsa, yongari
Tested by:      pho,
                G. Trematerra <giovanni dot trematerra at gmail dot com>,
                Brandon Gooch <jamesbrandongooch at gmail dot com>
Sponsored by:   Yahoo! Incorporated
Approved by:	re (ksmith)
2009-08-02 14:28:40 +00:00
Jung-uk Kim
e8c4d3e407 Match PCI Express root bridge _HID directly instead of
relying on _CID.

Reviewed by:	jhb
Approved by:	re (kib)
2009-07-13 21:36:31 +00:00
Jung-uk Kim
435f8ce5b8 Add a missing return in NULL mutex case.
Submitted by:	Pawel Worach (pawel dot worach at gmail dot com)
2009-06-22 17:46:55 +00:00
Jung-uk Kim
5d1540edf3 - Remove unnecessary read memory barriers from atomic operations[1].
- Define a macro to make my intention more clearer.

Submitted by:	jhb [1]
2009-06-11 16:48:59 +00:00
Jung-uk Kim
3ff9febde6 Catch up with r193750 (OsdSynch.c locking changes):
- Preallocate some memory for ACPI tasks early enough.  We cannot use
malloc(9) any more because spin mutex may be held here.  The reserved
memory can be tuned via debug.acpi.max_tasks tunable or ACPI_MAX_TASKS
in kernel configuration.  The default is 32 tasks.
- Implement a custom taskqueue_fast to wrap the new memory allocation.
This implementation is not the fastest in the world but we are being
conservative here.
2009-06-10 22:54:20 +00:00
John Baldwin
0668724b99 Rework the _BBN handling for Host-PCI bridges. Previously we only trusted
a _BBN value of 0 if it was for the first bridge encountered since some
older systems returned _BBN of 0 for all bridges.  However, some newer
systems enumerate bridges with non-zero _BBN before bus 0 which is
perfectly valid.  Handle both cases by trusting the first bridge that has
a _BBN of 0 and falling back to reading from non-standard config registers
only for subsequent bridges with a _BBN of 0.  We also only perform this
check for segment (domain) 0.  We assume that _BBN is always correct
for segments other than 0.

Tested by:	Josef Moellers  josef.moellers at fujitsu
MFC after:	1 week
2009-06-09 13:44:17 +00:00
Jung-uk Kim
c930b91c5f Remove redundant checks for ACPI_WAIT_FOREVER cases. 2009-06-08 20:50:38 +00:00
Jung-uk Kim
230bb4d90d Rewrite OsdSynch.c to reflect the latest ACPICA more closely:
- Implement ACPI semaphore (ACPI_SEMAPHORE) with condvar(9) and mutex(9).
- Implement ACPI mutex (ACPI_MUTEX) with mutex(9).
- Implement ACPI lock (ACPI_SPINLOCK) with spin mutex(9).
2009-06-08 20:07:16 +00:00
Jung-uk Kim
129d3046ef Import ACPICA 20090521. 2009-06-05 18:44:36 +00:00
Warner Losh
00b4e54ae7 We no longer need to use d_thread_t, migrate to struct thread *. 2009-05-20 17:29:21 +00:00
Alexander Motin
2500b6d96d Make dev.cpu.X.cx_usage sysctl also report current average of sleep time. 2009-05-03 06:25:37 +00:00
Alexander Motin
bb1d6ad5b3 Remove unused variable and fix spelling in comment. 2009-05-03 04:58:44 +00:00
Alexander Motin
b0baaaaecf Avoid comparing negative signed to positive unsignad values. It was
leading to a bug, when C-state does not decrease on sleep shorter then
declared transition latency. Fixing this deprecates workaround for broken
C-states on some hardware.

By the way, change state selecting logic a bit. Instead of last sleep
time use short-time average of it. Global interrupts rate in system is a
quite random value, to corellate subsequent sleeps so directly.
2009-05-02 22:30:33 +00:00
Jung-uk Kim
54b43614e7 Fix off-by-one bug. S5 state must be checked as well. 2009-04-30 18:00:53 +00:00
Jung-uk Kim
19682c4826 Fix style(9). 2009-04-30 17:45:43 +00:00
Jung-uk Kim
2d0c82e8cf Prefer device_printf() over printf() where ever possible. 2009-04-30 17:42:11 +00:00
Jung-uk Kim
a0e73a122d General sleep state change clean up.
- Probe supported sleep states from acpi_attach() just once and do not
call AcpiGetSleepTypeData() again.  It is redundant because
AcpiEnterSleepStatePrep() does it any way.
- Treat UNKNOWN sleep state as NONE, i.e., "do nothing", and remove obscure
NONE state (ACPI_S_STATES_MAX + 1) to avoid confusions.
- Do not set unsupported sleep states as default button/switch events.
If the default sleep state is not supported, just set it as UNKNOWN/NONE.
- Do not allow sleep state change if the system is not fully up and running.
This should prevent entering S5 state multiple times, which causes strange
behaviours later.
- Make sleep states case-insensitive when they are used with sysctl(8).
For example,

	sysctl hw.acpi.lid_switch_state=s1
	sysctl hw.acpi.sleep_button_state=none

are now legal and equivalent to the uppercase ones.
2009-04-30 17:35:44 +00:00
Andriy Gapon
33c70d417e acpi: do not run resume/backout code when entering S0/S5 states
This change adds (possibly redundant) early check for invalid
state input parameter (including S0). Handling of S5 request
is reduced to simply calling shutdown_nice(). As a result
control flow of acpi_EnterSleepState is somewhat simplified
and resume/backout half of the function is not executed
for S5 (soft poweroff) request and invalid state requests.

Note: it seems that shutdown_nice may act as nop when initproc
is already initialized (to grab pid of 1), but init process is in
"pre-natal" state.

Tested by:	Fabian Keil <fk@fabiankeil.de>
Reviewed by:	njl, jkim
Approved by:	rpaulo
2009-04-28 11:56:54 +00:00
John Baldwin
ea66717737 Move the code to update cpu_cx_count out of acpi_cpu_generic_cx_probe() and
into acpi_cpu_startup() which is where all the other code to update this
global variable lives.  This fixes a bug where cpu_cx_count was not updated
correctly if acpi_cpu_generic_cx_probe() returned early.

PR:		kern/108581
Debugged by:	Bruce Cran
Reviewed by:	avg, njl, sepotvin
MFC after:	3 days
2009-03-26 21:10:35 +00:00
Jung-uk Kim
0755473ba2 Add a function to reset system time after resuming, which will be used
by amd64 shortly.  It can be turned off by setting "debug.acpi.reset_clock"
tunable to zero.
2009-03-23 22:12:33 +00:00
Jung-uk Kim
d42f0ad883 Check whether devd is running before calling resume notifier and
reshuffle code to reduce unnecessary locking coverage.
2009-03-23 22:06:09 +00:00
Jung-uk Kim
c66d2b38c8 Initial suspend/resume support for amd64.
This code is heavily inspired by Takanori Watanabe's experimental SMP patch
for i386 and large portion was shamelessly cut and pasted from Peter Wemm's
AP boot code.
2009-03-17 00:48:11 +00:00
Andriy Gapon
f1e1ddc3d9 acpi_cpu: fixup for PIIX4E PCI config related to C2
This is triggered only if BIOS configures ACPI_BITREG_BUS_MASTER_RLD
aka BRLD_EN_BM to 1.
Rationale:
1. we do not support C3 on PIIX4E
2. bus master activity need not break out of C2 state
3. because of CPU_QUIRK_NO_BM_CTRL quirk we may reset bus master
   status which would result in immediate break out from C2

So if you have seen
cpu0: too many short sleeps, backing off to C1
with this chipset before you may want to try cx_lowest of C2 again.

Reviewed by: rpaulo (mentor), njl
Approved by: rpaulo (mentor)
2009-02-19 14:39:52 +00:00
Warner Losh
1496d4a967 pcib_read_config and pcib_write_config take u_int params. 2009-02-05 18:40:42 +00:00
Alexander Motin
0f9e2596e2 Convert battery capacity/rate from mA to mW only when summary is requested.
Unconditional conversion causes incorrect rate units reported by acpiconf.

MFC after:	2 weeks
2009-01-17 17:40:44 +00:00
Mike Silbersack
2b39b8273f Quick change to r186026. One of the conditionals was:
if (batt_sleep_ms)
	AcpiOsSleep(1);

where the rest are all:

if (batt_sleep_ms)
	AcpiOsSleep(batt_sleep_ms);

I can't recall why that one was different, so change it
to match the rest.

Pointed out by:	Christoph Mallon
MFC after:	2 weeks
2008-12-13 07:45:48 +00:00
Mike Silbersack
0a3604e155 Add the sysctl debug.acpi.batt.batt_sleep_ms.
On some laptops with smart batteries, enabling battery monitoring
software causes keystrokes from atkbd to be lost.  This has also been
reported on Linux, and is apparently due to the keyboard and I2C line
for the battery being routed through the same chip.  Whether that's
accurate or not, adding extra sleeps to the status checking code
causes the problem to go away.

I've been running this for nearly six months now on my laptop,
it works like a charm.

Reviewed by:	Nate Lawson (in a previous revision)
MFC after:	2 weeks
2008-12-13 06:04:34 +00:00
Ganbold Tsagaankhuu
d78d9a64cf Remove unused variable.
Found with:     Coverity Prevent(tm)
CID: 3678

Approved by: njl
2008-11-25 19:06:20 +00:00
Jung-uk Kim
ab9df4d74d Make sure legacy replacement route is turned off when enbling HPET.
Reviewed by:	jhb
2008-11-19 20:31:38 +00:00
John Baldwin
0d484d249f Allow device hints to wire the unit numbers of devices.
- An "at" hint now reserves a device name.
- A new BUS_HINT_DEVICE_UNIT method is added to the bus interface.  When
  determining the unit number of a device, this method is invoked to
  let the bus driver specify the unit of a device given a specific
  devclass.  This is the only way a device can be given a name reserved
  via an "at" hint.
- Implement BUS_HINT_DEVICE_UNIT() for the acpi(4) and isa(4) bus drivers.
  Both of these busses implement this by comparing the resources for a
  given hint device with the resources enumerated by ACPI/PnPBIOS and
  wire a unit if the hint resources are a subset of the "real" resources.
- Use bus_hinted_children() for adding hinted devices on isa(4) busses
  now instead of doing it by hand.
- Remove the unit kludging from sio(4) as it is no longer necessary.

Prodding from:	peter, imp
OK'd by:	marcel
MFC after:	1 month
2008-11-18 21:01:54 +00:00
Alexander Motin
9325b9b23b Remove " + 1".
Thread ID can't be zero anyway while increment may give owerflow.
2008-11-03 18:28:12 +00:00
Warner Losh
96cf0b6d56 Make the no driver stuff an ifdef. 2008-11-02 17:35:15 +00:00
Alexander Motin
57675eb3fa As soon as we have several threads per process now, it is not correct to
use process ID as ACPI thread ID. Concurrent requests with equal thread
IDs broke ACPI mutexes operation causing unpredictable errors including
AE_AML_MUTEX_NOT_ACQUIRED that I have seen.

Use kernel thread ID instead of process ID for ACPI thread.
2008-11-02 12:50:16 +00:00
Jung-uk Kim
d1dfacc2c8 Clean up DSDT and XSDT correctly instead of FADT when the tables are bad.
Submitted by:	jhb
Tested by:	olli
MFC after:	3 days
2008-09-19 15:25:13 +00:00
Warner Losh
099ea4b570 Handle errors from device_get_children. 2008-08-23 16:38:20 +00:00
John Baldwin
d320e05ca5 Extend the support for PCI-e memory mapped configuration space access:
- Rename pciereg_cfgopen() to pcie_cfgregopen() and expose it to the
  rest of the kernel.  It now also accepts parameters via function
  arguments rather than global variables.
- Add a notion of minimum and maximum bus numbers and reject requests for
  an out of range bus.
- Add more range checks on slot/func/reg/bytes parameters to the cfg reg
  read/write routines.  Don't panic on any invalid parameters, just fail
  the request (writes do nothing, reads return -1).  This matches the
  behavior of the other cfg mechanisms.
- Port the memory mapped configuration space access to amd64.  On amd64
  we simply use the direct map (via pmap_mapdev()) for the memory mapped
  window.
- During acpi_attach() just after loading the ACPI tables, check for a
  MCFG table.  If it exists, call pciereg_cfgopen() on each subtable
  (memory mapped window).  For now we only support windows for domain 0
  that start with bus 0.  This removes the need for more chipset-specific
  quirks in the MD code.
- Remove the chipset-specific quirks for the Intel 5000P/V/Z chipsets
  since these machines should all have MCFG tables via ACPI.
- Updated pci_cfgregopen() to DTRT if ACPI had invoked pcie_cfgregopen()
  earlier.

MFC after:	2 weeks
2008-08-22 02:14:23 +00:00
John Baldwin
8c0879b6f6 Fix a typo. 2008-08-04 19:45:15 +00:00
John Baldwin
b661868711 Further refine the probe order of devices to more closely match the previous
behavior.  Specifically, probe Host-PCI bridges in the order they are
encountered in the tree.  For CPUs, just use an order of 100000 and assume
that no Host-PCI bridges will be more than 10000 levels deep in the
namespace.  This fixes an issue on some boxes where the HPET timer stopped
attaching.
2008-07-23 15:13:06 +00:00
Rui Paulo
edbb029388 Initialize tz_active to a new constant TZ_ACTIVE_UNKNOWN and make no
assumptions about the state of the cooling devices. Instead, switch them
off on init and, only after that, we are in TZ_ACTIVE_NONE.

Submited by:	Andriy Gapon <avg at icyb.net.ua>
Reviewed by:	njl
2008-04-25 16:45:13 +00:00
Rui Paulo
89ab2a7a53 Update the list of Cx states when ACPICA notifies us. Usually, this
notification is sent when the AC plug is plugged in/out.

This is required on some laptops, namely the MacBooks.

Silence on:	 freebsd-acpi
2008-04-12 12:06:00 +00:00
John Baldwin
d227204d2d Revert back to probing Host-PCI bridges in the order we encounter them in
the tree rather than sorting them by their address on PCI bus 0.

Reported by:	kan
2008-04-07 18:35:11 +00:00
Takanori Watanabe
9d4ae9aa5b GPE lock may recurse on resume path. 2008-04-05 14:21:01 +00:00
John Baldwin
5217af301c Rework how the nexus(4) device works on x86 to better handle the idea of
different "platforms" on x86 machines.  The existing code already handles
having two platforms: ACPI and legacy.  However, the existing approach was
rather hardcoded and difficult to extend.  These changes take the approach
that each x86 hardware platform should provide its own nexus(4) driver (it
can inherit most of its behavior from the default legacy nexus(4) driver)
which is responsible for probing for the platform and performing
appropriate platform-specific setup during attach (such as adding a
platform-specific bus device).  This does mean changing the x86 platform
busses to no longer use an identify routine for probing, but to move that
logic into their matching nexus(4) driver instead.
- Make the default nexus(4) driver in nexus.c on i386 and amd64 handle the
  legacy platform.  It's probe routine now returns BUS_PROBE_GENERIC so it
  can be overriden.
- Expose a nexus_init_resources() routine which initializes the various
  resource managers so that subclassed nexus(4) drivers can invoke it from
  their attach routine.
- The legacy nexus(4) driver explicitly adds a legacy0 device in its
  attach routine.
- The ACPI driver no longer contains an new-bus identify method.  Instead
  it exposes a public function (acpi_identify()) which is a probe routine
  that the MD nexus(4) drivers can use to probe for ACPI.  All of the
  probe logic in acpi_probe() is now moved into acpi_identify() and
  acpi_probe() is just a stub.
- On i386 and amd64, an ACPI-specific nexus(4) driver checks for ACPI via
  acpi_identify() and claims the nexus0 device if the probe succeeds.  It
  then explicitly adds an acpi0 device in its attach routine.
- The legacy(4) driver no longer knows anything about the acpi0 device.
- On ia64 if acpi_identify() fails you basically end up with no devices.
  This matches the previous behavior where the old acpi_identify() would
  fail to add an acpi0 device again leaving you with no devices.

Discussed with:	imp
Silence on:	arch@
2008-03-13 20:39:04 +00:00
John Baldwin
463e0f91cb Probe CPUs after the PCI hierarchy on i386, amd64, and ia64. This allows
the cpufreq drivers to reliably use properties of PCI devices for quirks,
etc.
- For the legacy drivers, add CPU devices via an identify routine in the
  CPU driver itself rather than in the legacy driver's attach routine.
- Add CPU devices after Host-PCI bridges in the acpi bus driver.
- Change the ichss(4) driver to use pci_find_bsf() to locate the ICH and
  check its device ID rather than having a bogus PCI attachment that only
  checked for the ID in probe and always failed.  As a side effect, you
  can now kldload ichss after boot.
- Fix the ichss(4) driver to use the correct device_t for the ICH (and not
  for ichss0) when doing PCI config space operations to enable SpeedStep.

MFC after:	2 weeks
Reviewed by:	njl, Andriy Gapon  avg of icyb.net.ua
2008-03-10 22:18:07 +00:00
Rui Paulo
8a000acaa9 Some PIIX4 chipsets need to be told to generate Stop Breaks by setting
the appropriate bit in the DEVACTB register.
This change allows the C2 state on those systems to work as expected.

Reviewed by:	njl
Submitted by:	Andriy Gapon <avg at icyb.net.ua>
MFC after:	1 week
2008-03-09 11:19:03 +00:00
Hajimu UMEMOTO
d1c0178bfe Create a thread to handle passive cooling for 1st zone which has _PSV,
_TSP, _TC1 and _TC2.

Contirmed by:	"Alexandre \"Sunny\" Kovalenko" <alex.kovalenko_at_verizon.net>
Reviewed by:	njl
MFC after:	1 week
2008-02-16 07:15:34 +00:00
Rui Paulo
9e684e54fe Allow the user to override the current active cooling state if state
is currently TZ_ACTIVE_NONE.

Submitted by:   Andriy Gapon <avg at icyb.net.ua>
Reviewed by:    njl (mentor)
Approved by:    njl (mentor)
Requested by:   njl (mentor)
MFC after:      3 days
2008-02-16 02:09:05 +00:00