Although this may not be what the original sysctl was designed to do,
it feels a bit more "expected".
Before, if ANI is disabled, the initial ANI parameters are still written
to the hardware, even if they're not enabled. "ANI enabled" would then
adjust the noise immunity parameters dynamically. Disabling ANI would
simply leave the existing noise immunity parameters where they are,
and disable the dynamic part.
The problem is that disabling ANI doesn't leave the hardware in
a consistent, predictable state - so asking a user to disable ANI
wouldn't actually reset the NIC to a consistent set of PHY signal
detection parameters, resulting in an unpredictable/unreliable outcome.
This makes it difficult to get reliable debugging information from
the user.
Approved by: re (kib)
coordinates, such as digitizers and touch-screens, leaving these devices
to uhid(4) and user-level. Specially patched xf86-input-mouse driver can
handle them, that isn't done and can't be done properly with ums(4)
because of mouse(4) protocol limitations.
Approved by: re (kib)
Slot field of the PxCMD register may point to an empty command slot.
That breaks command timeout detection logic, making impossible to find
what command actually caused timeout, and leading to infinite wait.
Workaround that by checking whether pointed command slot is really used
and can timeout in its time. And if not, fallback to the dumb algorithm
used with FBS -- let all commands to time out and then fail all of them.
Approved by: re (kib)
MFC after: 1 week
respond to any commands. I've found that because of multiple command
retries, each of which cause 30s timeout, bus reset and another retry or
requeue for many commands, it may take ages to eventually drop the
failed device. The odd thing is that those retries continue even after
XPT considered device as dead and invalidated it.
This patch makes cam_periph_error() to block any command retries after
periph was marked as invalid. With that patch all activity completes in
1-2 minutes, just after several timeouts, required to consider device
death. This should make ZFS, gmirror, graid, etc. operation more robust.
Reviewed by: mjacob@ on scsi@
Approved by: re (kib)
data when 'show drives' succeeds, often resulting in a failing exit code
even though the command worked fine.
Reviewed by: bz
Approved by: re (kib)
MFC after: 3 days
the right SIM in case the HBA is RAID-capable but the target in question is
not a hot spare or member of a RAID volume.
- Report the loss and addition of SAS and SATA targets detected via PHY link
status changes and signalled by MPI_EVENT_SAS_DEVICE_STATUS_CHANGE to cam(4)
as lost devices and trigger rescans as appropriate. Without this it can take
quite some time until a lost device actually is no longer tried to be used,
if it ever stops. [1]
- Handle MPI_EVENT_IR2, MPI_EVENT_LOG_ENTRY_ADDED, MPI_EVENT_SAS_DISCOVERY
and MPI_EVENT_SAS_PHY_LINK_STATUS silently as these serve no additional
purpose beyond adding cryptic entries to logs.
Thanks to Hans-Joerg Sirtl for providing one of the HBAs these changes were
developed with and RIP to the mainboard that didn't survive testing them.
PR: 157534 [1]
Approved by: re (kib)
MFC after: 2 weeks
- Sprinkle some const where appropriate.
- Consistently use target_id_t for the target parameter of mpt_map_physdisk()
and mpt_is_raid_volume().
- Fix some whitespace bugs.
Approved by: re (kib)
recommended to allow root users in the jail to access the host system.
PR: docs/156853
Submitted by: crees
Patch by: crees
Approved by: re (kib) for BETA1
you were stuck in an endless loop.
Reported by: kensmith
Approved by: re (kib) for BETA1
Pointy hat to: bz - wonder why I had not tested legacy IP thoroughly..
This is done per request/suggestion from John Baldwin
who introduced the option. Trying to resume normal
system operation after a panic is very unpredictable
and dangerous. It will become even more dangerous
when we allow a thread in panic(9) to penetrate all
lock contexts.
I understand that the only purpose of this option was
for testing scenarios potentially resulting in panic.
Suggested by: jhb
Reviewed by: attilio, jhb
X-MFC-After: never
Approved by: re (kib)
so that it is visible to userland programs. This change enables
the `mount' command with no arguments to be able to show if a
filesystem is mounted using journaled soft updates as opposed
to just normal soft updates.
Approved by: re (bz)
32 bits to 64 bits and eliminates the unused mnt_xflag field. The
existing mnt_flag field is completely out of bits, so this update
gives us room to expand. Note that the f_flags field in the statfs
structure is already 64 bits, so the expanded mnt_flag field can
be exported without having to make any changes in the statfs structure.
Approved by: re (bz)
* Correctly handle -a.
* -A isn't supported.
* Show all closed 1-to-1 and 1-to-many style sockets.
* Show all listening 1-to-many style sockets.
* Use consistent formatting for -W.
PR: 150642
Approved by: re@
MFC after: 4 weeks.
accessing SATA registers. Unserialized access under heavy load caused
wrong speed reporting and potentially could cause device loss.
- To free memory and other resources (including above), allocated
during chipinit() method call on attach, add new chipdeinit() method,
called during driver detach.
Submitted by: Andrew Boyer <aboyer@averesystems.com> (initial version)
Approved by: re (kib)
MFC after: 1 week
Now that the code is in place to audit capability method rights, start
using it to audit the 'rights' argument to cap_new(2).
Approved by: re (kib), mentor (rwatson)
Sponsored by: Google Inc
Since no actual radar data is ever handled, this won't
do anything. It's mostly here as a reference for those who
wish to experiment with radar detection.
Approved by: re (kib)
the resource covers the entire range. Some BIOSes appear to mark
endpoints as non-fixed incorrectly (non-fixed endpoints are supposed to
be used in _PRS when OSPM is allowed to allocate a certain chunk of
address space within a larger range, I don't believe it is supposed to be
used for _CRS).
Approved by: re (kib)
which does not require change in the znode structure.
Specifically, it queries rdev from the znode in the
same sa_bulk_lookup already done in zfs_getattr().
Submitted by: pjd (with some revisions)
Reviewed by: pjd, mm
Approved by: re (kib)
ioctl interface for DFS modules to use.
Since there's no open source dfs code yet, this doesn't introduce any
operational changes.
Approved by: re (kib)
tools.
* introduce pe_enabled, which (will) indicate whether the radar
detection stuff is enabled or not. Right now it's incorrectly
set, based on something previously written. I'll sort it out
later.
* Don't set HAL_PHYERR_PARAM_ENABLE in pe_relstep to say whether
radar detection is on.
* Return whether blockradar, fir128 and enmaxrssi is enabled.
* Change some of the phyerr params to be integers rather than
HAL_BOOL so they can be set to the NOPARAM value when the
setup function is called. This is in line with other radar
parameters.
* Add new configuration parameters for fir128, blockradar and
enmaxrssi, rather than defaulting to off, on and on respectively.
Approved by: re (kib)
polluting the AR5416 code with later chipset support.
Note: ar9280InitPLL() supports Merlin (AR9280) and later (AR9285, AR9287.)
Submitted by: ssgriffonuser@gmail.com
Approved by: re (kib)
These should be disabled for the AR5416 in hostap/mesh/ibss mode,
as the AR5416 doesn't have support for radar detection on the
ext channel of a HT40 setup. Later chips do.
Approved by: re (kib)
containing a kernel under /boot and that it's default value is "kernel"
not "/boot/kernel/kernel".
PR: docs/158992
Reported by: Wayne Mitchell wayne.mitchell.iz at gmail
Approved by: re (kib)
MFC after: 1 week
These system calls have already been implemented in the kernel; now we
hook up libc symbols so userspace can drive them.
Approved by: re (kib), mentor (rwatson)
Sponsored by: Google Inc
reference driver.
* Australia should use FCC3_WORLD
* Add some new SKUs; these are just the EEPROM values and haven't been
fully defined yet. As such they won't affect anything.
Obtained from: Atheros
Approved by: re (kib)
When reporting on a capability, flag the fact that it is a capability,
but also unwrap to report all of the usual information about the
underlying file.
Approved by: re (kib), mentor (rwatson)
Sponsored by: Google Inc
on frequency bands with DFS. All Atheros chipsets >= AR9001 support
radar event detection on HT40 extension channels.
This should be a chipset specific item rather than enforced in the
regulatory domain database.
In addition, it's irrelevant for STA mode, as the radar detection is
done by the access point, not the STA.
Approved by: re (kib)
pollution. That is a step further in the direction of building correct
policies for userland and modules on how to deal with the number of
maxcpus at runtime.
Reported by: jhb
Reviewed and tested by: pluknet
Approved by: re (kib)