The zoneinfo makefile doesn't follow the rules. It builds everything
at install time. It dpends on zic to create the directories. zic
doesn't know about the weird 555 permissions specified in BSD.usr.dist,
so it creates the directories with nonstandard permissions.
The rest of the code was treating it as a header mbuf, but it was
allocated as a normal mbuf.
This fixes the panic: ip_output no HDR when you have a multicast
tunnel configured.
Changed an expression "one year ago", which is in fact only valid
for a short period of time.
Updated the section about ports. Make this more general, "hundreds of
ports" and give a concrete number of ports (over 710) with a timestamp
"at end of November 96".
I reformatted the "ports" paragraph using fmt, because I think it looks
nicer now in sgml source. So the diff shows more changed lines than was
actually changed. If this isn't suitable for you, then I'll do my best
in the future, to avoid this. My intention was, to make the source look
nicer as well.
the keyboard IO port definitions from <machine/console.h>.
Note: I do not have a machine available to test this yet, I sent this
for review to several people who have not replied.
This is also totally busted in 2.2, which has half of the syscons/psm/kbdio
changes in it. This really desperately needs to be tested and fixed
in 2.2 as well.
it is both uneeded and breaks certain lock-step timing in the rexec
protocol.
Yes, an attacker can "relay" connections using this trick, but a properly
configured firewall that would make this sort of subterfuge necessary in the
first place (instead of direct packet spoofing) would also thwart useful
attacks based on this.
SCBs in response to a busfree.
When re-queueing an SCB that returned with QUEUE FULL status, reset its timeout.
Ensure that aborted SCBs have an error code set in there xs before it gets
passed back up with scsi_done.
Fix a few KNF nits.
Immediate SCBs, since they always send messages that tell the target to
transition to bus free now rely on the busfree interrupt instead of the
IMMEDDONE sequencer interrupt that was generated before.
Rearrange some code in the message out loop to give ATN a little more time
to drop before we ACK the last byte.
Use SPIORDY instead of REQINIT when snooping for a tag message on a reconnect.
This is done for the same reasons we use SPIORDY in the inb functions.
When going into BITBUCKET mode, turn off HDMAEN in the DFCNTRL register so
that we can "not care" what the value of HCNT is. If HCNT is 0, BITBUCKET
mode won't transfer any data if HDMAEN is set. Seeing as we don't want the
transfer to even think about touching the host, this seems more sane anyway.
Thanks to "Dan Willis" <dan@plutotech.com> for pointing out that this was
a problem.
uses /usr/include/sys/*, which may point to a different build tree. I'm
not sure that this is necessary, but there was a question mark over what
/usr/include/sys points to when building the "user mode" binaries in the
kernel code, especially when building the smp tree.
I suspect that the "right" line here is to use ${INCLUDES}, but that
causes warnings about unused static inline functions in stdio.h and ctype.h
- Don't link against libkvm and don't uselessly include <kvm.h>.
- Declare constant objects as const.
- Declare functions with the correct types.
- Call functions with the correct parameters.
Not fixed:
- The sysctl parsing remains ugly (but it may be the best we can do).
- atnetrange() should use strtoul() rather than sscanf() for better
error checking.
also fixes a bug I've been chasing for a LONG TIME,
due to the fact that spec_bwrite is a NOP and I didn't realise it..
old symptom:
mount -t devfs devfs /mnt
mount /mnt/wd0e /mnt/mnt2
umount /mnt2 <process hangs>
there are some pretty large structural differences internal to devfs
but outwards it should look the same.
I have not yet tested extensively but will do so and fix 3 warnings tomorrow.
SPIORDY should go active on any REQ of the bus, so testing for REQINIT is
not necessary. It also seems that testing for SPIORDY is more robust then
REQINIT since SPIORDY comes active after REQINIT and PHASEMIS seems to take
some time to come true after REQ is asserted if the phase has changed. Of
course, none of this is documented.
This should give the code savings of my original changes, without breaking the
driver on fast peripherals.
Fenner was kind enough to point out the error of my ways. This incorporates
diffs from him which:
- Keep everything in network order.
- Log the booted ether & ip address, instead of my address on that net
- change several exit()'s to return()'s, so that rarpd continues running
even if it thinks it's in a weird state.
One small tweak by me: in rarp_bootable(), we have to make sure to
construct 'ipname' in host byte order (if we don't, we have to
specify /tftpboot/<remote IP in hex> with <remote IP in hex> in
network byte order, which is confusing).
Also restored use of <dirent.h> rather than <sys/dir.h> as pointed
out by bde.
Also updated the man page so that the -v flag is documented.
With any luck, I won't have to touch this thing again.
