Adrian Chadd 003df2a90f Fix the half/quater rate PLL setup for AR5416, AR9160 and ... (beta?) AR9280 chips. Note: This doesn't "fix" half/quarter rate support for these chips; it merely fixes an oversight. Obtained from: Atheros		2011-05-12 03:25:24 +00:00
..
ar2133.c	Another Howl (AR9130) fix.	2011-05-05 04:43:05 +00:00
ar5416_ani.c	Update the ext channel cycpwr threshold 1 register for the extension	2011-05-07 13:08:48 +00:00
ar5416_attach.c	Make sure the chip is awake before writing to it to finally detach	2011-05-11 13:24:17 +00:00
ar5416_beacon.c
ar5416_cal_adcdc.c
ar5416_cal_adcgain.c
ar5416_cal_iq.c
ar5416_cal.c	Make the NF calibration logic (hopefully!) more resistive to noisy	2011-05-11 13:40:13 +00:00
ar5416_cal.h	Introduce methods for the initial calibration and the new PA calibration	2011-03-11 11:35:36 +00:00
ar5416_eeprom.c
ar5416_gpio.c
ar5416_interrupts.c	Introduce AR9130 (HOWL) WMAC support to the FreeBSD HAL.	2011-04-28 12:47:40 +00:00
ar5416_keycache.c
ar5416_misc.c	Do a HAL capabilities sync pass based on the Atheros HAL.	2011-05-07 15:30:23 +00:00
ar5416_phy.c	Modify the AR5416 11na rate table to use 24mb OFDM 11a for control traffic,	2011-02-21 05:10:34 +00:00
ar5416_power.c	Fixes from Atheros:	2011-05-12 03:15:21 +00:00
ar5416_recv.c	Add a HAL capability bit for supporting self-linked RX descriptors and disable it for the 11n chipsets.	2011-04-04 14:52:31 +00:00
ar5416_reset.c	Fix the half/quater rate PLL setup for AR5416, AR9160 and	2011-05-12 03:25:24 +00:00
ar5416_xmit.c	Bring over a few queue changes from ath9k:	2011-03-22 00:14:17 +00:00
ar5416.h	Add a function which enables or disables RX RIFS searching, and migrate	2011-05-06 15:33:56 +00:00
ar5416.ini
ar5416desc.h	Change AR_SREV_OWL_{X}_OR_LATER to AR_SREV_5416_{X}_OR_LATER.	2011-05-07 02:59:24 +00:00
ar5416phy.h	Update the ext channel cycpwr threshold 1 register for the extension	2011-05-07 13:08:48 +00:00
ar5416reg.h	* Add AR_SREV_KITE macro for later use	2011-05-08 15:25:22 +00:00