freebsd-dev/sys/arm/at91
2015-04-04 23:00:37 +00:00
..
at91_aic.c Unify interrupts bit definition and usage. While here remove PSR_C_bit. 2014-09-10 15:25:15 +00:00
at91_aicreg.h
at91_cfata.c
at91_common.c Include machine/intr.h for arm_post_filter. 2015-04-04 23:00:37 +00:00
at91_gpio.h Provide a simplified way to specify GPIO pins for the Atmel port. 2014-01-15 19:49:12 +00:00
at91_machdep.c Remove the bootconfig parsing. We never used it and always passed either an 2015-03-29 20:37:28 +00:00
at91_mci.c Make note about reset vs RTOE actions... 2014-08-18 21:04:35 +00:00
at91_mcireg.h Print the symbolic bit names for the status when we get a timeout. 2014-08-14 23:17:33 +00:00
at91_pdcreg.h
at91_pinctrl.c Convert the at91_pinctrl driver to use the new fdt_pinctrl interface. 2014-09-13 19:59:16 +00:00
at91_pio_sam9g20.h
at91_pio_sam9g45.h Add support for the Atmel AT91SAM9G45 CPU. 2012-07-26 08:01:25 +00:00
at91_pio.c Implement the FDT static pinctl/pinmux spec for Atmel. This will 2014-08-15 16:08:52 +00:00
at91_pioreg.h Add definitions for the additional PIO pins found on recent AT91 SoCs. 2013-12-02 02:33:03 +00:00
at91_piovar.h Implement the FDT static pinctl/pinmux spec for Atmel. This will 2014-08-15 16:08:52 +00:00
at91_pit.c Add support for multipass to Atmel, for both FDT and !FDT cases. 2014-08-14 04:21:25 +00:00
at91_pitreg.h at91pit->at91_pit for consistnecy with other drivers. 2012-07-11 17:11:54 +00:00
at91_pmc.c Add support for multipass to Atmel, for both FDT and !FDT cases. 2014-08-14 04:21:25 +00:00
at91_pmcreg.h Add charge pump current register. 2012-08-10 04:47:20 +00:00
at91_pmcvar.h Correct the PLLA setting functions and centralize. 2012-08-11 05:45:19 +00:00
at91_reset.S Eliminate the AT91XXXX_BASE for each SoC. AT91_BASE is the right way 2012-07-10 02:14:50 +00:00
at91_rst.c Add FDT attachment. Flag lost functionality with FDT_HACKS so we can 2014-02-09 20:59:46 +00:00
at91_rstreg.h at91$DEV->at91_$DEV to match other Atmel drivers. Also, export 2012-07-11 17:11:07 +00:00
at91_rtc.c Loop reading the RTC registers until the same values are obtained 2012-10-07 20:36:46 +00:00
at91_rtcreg.h Use the RTC unit to get the time. This works on all known AT91SAM9* 2012-10-07 01:58:32 +00:00
at91_sdramc.c Add device node for SDRAMC device. Currently just claims device's 2014-02-28 02:59:51 +00:00
at91_shdwc.c shdwc device for fdt 2014-02-28 03:00:25 +00:00
at91_smc.c Add standard memory controller helper functions. 2014-01-19 17:45:13 +00:00
at91_smc.h Add standard memory controller helper functions. 2014-01-19 17:45:13 +00:00
at91_spi.c Honor the disabled status by only grabbing resources and returning 2014-02-13 16:50:08 +00:00
at91_spireg.h - Prepend the device description with "AT91" to reflect its nature. [1] 2012-06-03 00:54:10 +00:00
at91_ssc.c Strip trailing whitespace before other changes. 2012-06-13 04:52:19 +00:00
at91_sscreg.h
at91_st.c Make the SoC stuff a little more modular, and start to move away from 2012-07-11 20:17:14 +00:00
at91_streg.h Make the SoC stuff a little more modular, and start to move away from 2012-07-11 20:17:14 +00:00
at91_tcb.c tcb device for fdt 2014-02-28 03:00:28 +00:00
at91_twi.c Honor the disabled status by only grabbing resources and returning 2014-02-13 16:50:08 +00:00
at91_twiio.h
at91_twireg.h
at91_usartreg.h
at91_wdt.c FDT attachment... 2014-02-09 21:01:53 +00:00
at91_wdtreg.h Strip trailing whitespace before other changes. 2012-06-13 04:52:19 +00:00
at91.c Use explicit initializer style, fill in missing functions. 2015-01-21 03:28:07 +00:00
at91board.h Create a generic way to support multiple boards within an 2012-07-07 05:02:39 +00:00
at91reg.h The system IRQ is always IRQ 1. Make it so. 2012-07-10 02:39:03 +00:00
at91rm92reg.h Fix typos. 2014-09-26 09:07:02 +00:00
at91rm9200_devices.c Fix a typo: the RXD0 pin is PA18, not PA19. 2013-03-29 18:06:54 +00:00
at91rm9200.c Remove a bogus AIC. 2014-09-27 02:15:45 +00:00
at91rm9200var.h Configure the peripheral pins for MCI devices. Eliminate the now-unused 2012-07-15 05:41:43 +00:00
at91sam9g20.c Move AIC related stuff to own file. 2014-03-08 06:06:50 +00:00
at91sam9g20reg.h Fix typos. 2014-09-26 09:07:02 +00:00
at91sam9g45.c Add data so we can convert a PIO unit number into a base address. 2014-01-15 19:53:36 +00:00
at91sam9g45reg.h Fix the definitioin of AT91SAM9G45_IRQ_PIOE and rename it to 2014-09-27 14:39:00 +00:00
at91sam9x5.c Move AIC related stuff to own file. 2014-03-08 06:06:50 +00:00
at91sam9x5reg.h Fix typos. 2014-09-26 09:07:02 +00:00
at91sam9260.c Add AIC to at91sam9260 support, now that it is needed for multipass to 2014-08-14 04:21:31 +00:00
at91sam9260reg.h Fix the size of AT91SAM9260_PIT_SIZE. 2014-09-26 09:08:09 +00:00
at91soc.c Make the SoC stuff a little more modular, and start to move away from 2012-07-11 20:17:14 +00:00
at91soc.h Make the SoC stuff a little more modular, and start to move away from 2012-07-11 20:17:14 +00:00
at91var.h Make at91_soc_id() public. 2014-03-08 05:03:56 +00:00
board_bwct.c Configure the peripheral pins for MCI devices. Eliminate the now-unused 2012-07-15 05:41:43 +00:00
board_eb9200.c Fix board ID too... 2014-02-13 15:47:41 +00:00
board_ethernut5.c uboot should be telling us it is an ETHERNUT5 for this board. Tag it 2012-07-14 06:00:37 +00:00
board_hl200.c Configure the peripheral pins for MCI devices. Eliminate the now-unused 2012-07-15 05:41:43 +00:00
board_hl201.c Connect NAND for the SAM9260EK eval board, as well as the HotE HL-201. 2014-01-19 17:59:34 +00:00
board_kb920x.c Configure the peripheral pins for MCI devices. Eliminate the now-unused 2012-07-15 05:41:43 +00:00
board_qila9g20.c Create a generic way to support multiple boards within an 2012-07-07 05:02:39 +00:00
board_sam9g20ek.c Create a generic way to support multiple boards within an 2012-07-07 05:02:39 +00:00
board_sam9x25ek.c Create a generic way to support multiple boards within an 2012-07-07 05:02:39 +00:00
board_sam9260ek.c Fix gcc with -Wstrict-prototypes by telling it bi_emac takes no parameters. 2014-01-25 19:36:27 +00:00
board_sn9g45.c Add new at91sam9g45 support and sn9g45 board to the ATMEL kernel. 2012-07-27 16:38:02 +00:00
board_tsc4370.c Remove extra semicolons. 2014-06-06 16:37:42 +00:00
files.at91 Build the cpufunc_asm_* files based on the cpu type, not which config file 2015-03-29 22:43:39 +00:00
if_ate.c Mechanically convert to if_inc_counter(). 2014-09-19 09:20:16 +00:00
if_atereg.h
if_macb.c Mechanically convert to if_inc_counter(). 2014-09-19 09:20:16 +00:00
if_macbreg.h
if_macbvar.h Fix undefined behavior: (1 << 31) is not defined as 1 is an int and this 2013-11-30 22:17:27 +00:00
std.at91 Set machine correctly on ARM. This allows universe to use the correct world 2012-08-18 05:48:19 +00:00
std.at91sam9 Set machine correctly on ARM. This allows universe to use the correct world 2012-08-18 05:48:19 +00:00
std.at91sam9g45 Set machine correctly on ARM. This allows universe to use the correct world 2012-08-18 05:48:19 +00:00
std.atmel Remove the ARM_DEVICE_MULTIPASS option and make its effect be the default. 2014-10-26 18:30:35 +00:00
std.bwct Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with 2014-01-28 09:12:04 +00:00
std.eb9200 Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with 2014-01-28 09:12:04 +00:00
std.ethernut5 Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with 2014-01-28 09:12:04 +00:00
std.hl200 Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with 2014-01-28 09:12:04 +00:00
std.hl201 Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with 2014-01-28 09:12:04 +00:00
std.kb920x Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with 2014-01-28 09:12:04 +00:00
std.qila9g20 Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with 2014-01-28 09:12:04 +00:00
std.sam9g20ek Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with 2014-01-28 09:12:04 +00:00
std.sam9x25ek Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with 2014-01-28 09:12:04 +00:00
std.sam9260ek Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with 2014-01-28 09:12:04 +00:00
std.sn9g45 Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with 2014-01-28 09:12:04 +00:00
std.tsc4370 Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with 2014-01-28 09:12:04 +00:00
uart_bus_at91usart.c Move the uart_class definitions and fdt compat data into the individual 2015-03-07 15:24:15 +00:00
uart_cpu_at91usart.c Move the uart_class definitions and fdt compat data into the individual 2015-03-07 15:24:15 +00:00
uart_dev_at91usart.c Move the uart_class definitions and fdt compat data into the individual 2015-03-07 15:24:15 +00:00