..
aac
aacraid
acpi_support
acpica
Convert rman to use rman_res_t instead of u_long
2016-01-27 02:23:54 +00:00
adb
adlink
advansys
Convert rman to use rman_res_t instead of u_long
2016-01-27 02:23:54 +00:00
ae
age
agp
aha
ahb
ahci
Convert rman to use rman_res_t instead of u_long
2016-01-27 02:23:54 +00:00
aic
Create a generic PCCARD_PNP_INFO from the MODULE_PNP_INFO building
2015-12-11 05:27:56 +00:00
aic7xxx
Fix LDADD/DPADD that should be LIBADD.
2015-12-04 03:17:47 +00:00
alc
ale
alpm
altera
amdpm
amdsbwd
amdsmb
amdtemp
amr
an
Create a generic PCCARD_PNP_INFO from the MODULE_PNP_INFO building
2015-12-11 05:27:56 +00:00
arcmsr
Update arcmsr(4) to 1.30.00.00 in order to add support of
2015-12-02 05:35:04 +00:00
asmc
Fix undefined behavior when using asmc_fan_getstring()
2016-01-05 10:25:22 +00:00
ata
Convert rman to use rman_res_t instead of u_long
2016-01-27 02:23:54 +00:00
ath
[ath] remove the inline version of the register access macros.
2016-01-03 17:58:11 +00:00
atkbdc
Convert rman to use rman_res_t instead of u_long
2016-01-27 02:23:54 +00:00
auxio
bce
beri
bfe
bge
bktr
bm
buslogic
bvm
bwi
net80211 drivers: fix ieee80211_init_channels() usage
2016-01-07 18:41:03 +00:00
bwn
net80211: remove hardcoded slot time durations from drivers
2015-12-13 20:48:24 +00:00
bxe
Add support for firmware dump (a.k.a grcdump)
2015-12-23 03:19:12 +00:00
cadence
cardbus
cas
ce
cesa
cfe
cfi
ciss
r249170 was just plain wrong. The effect of the change is to always
2015-09-03 17:46:57 +00:00
cm
cmx
Create a generic PCCARD_PNP_INFO from the MODULE_PNP_INFO building
2015-12-11 05:27:56 +00:00
coretemp
cp
cpuctl
cpufreq
cs
Convert rman to use rman_res_t instead of u_long
2016-01-27 02:23:54 +00:00
ct
ctau
Convert rman to use rman_res_t instead of u_long
2016-01-27 02:23:54 +00:00
cx
Convert rman to use rman_res_t instead of u_long
2016-01-27 02:23:54 +00:00
cxgb
More fixes to the build.
2016-01-27 05:15:53 +00:00
cxgbe
More fixes to the build.
2016-01-27 05:15:53 +00:00
cy
cyapa
Allow building a kernel with baked in ig4, isl and cyapa drivers.
2015-08-19 09:49:29 +00:00
dc
dcons
de
Fix build when KTR is defined but not KTR_TULIP.
2015-11-20 09:37:04 +00:00
digi
dpms
dpt
drm
Instead of defining the actualy user and group id in the drmP.h files
2015-08-11 16:51:44 +00:00
drm2
drm: Revert the part of r288653 about M_WAITOK vs M_NOWAIT
2016-01-13 20:35:02 +00:00
dwc
Fix the build by adding the alternate descriptors and MII clock defines.
2015-09-20 14:28:06 +00:00
e1000
Add optimizing LRO wrapper:
2016-01-19 15:33:28 +00:00
ed
Convert rman to use rman_res_t instead of u_long
2016-01-27 02:23:54 +00:00
eisa
Convert rman to use rman_res_t instead of u_long
2016-01-27 02:23:54 +00:00
en
ep
Create a generic PCCARD_PNP_INFO from the MODULE_PNP_INFO building
2015-12-11 05:27:56 +00:00
esp
et
etherswitch
[mdio] migrate mdiobus out of etherswitch and into a top-level device of its own.
2015-12-26 02:31:39 +00:00
ex
Create a generic PCCARD_PNP_INFO from the MODULE_PNP_INFO building
2015-12-11 05:27:56 +00:00
exca
extres
Add reset framework, a second part of new 'extended resources' family of
2016-01-24 11:03:35 +00:00
fatm
fb
fdc
Create a generic PCCARD_PNP_INFO from the MODULE_PNP_INFO building
2015-12-11 05:27:56 +00:00
fdt
Convert rman to use rman_res_t instead of u_long
2016-01-27 02:23:54 +00:00
fe
Convert rman to use rman_res_t instead of u_long
2016-01-27 02:23:54 +00:00
ffec
filemon
filemon: Track the process pointer rather than a pid.
2016-01-29 00:44:32 +00:00
firewire
flash
[flash] Teach mx25l SPI flash driver to interact with fdt_slicer and geom_flashmap
2016-01-22 03:15:53 +00:00
fxp
gem
glxiic
glxsb
gpio
Convert rman to use rman_res_t instead of u_long
2016-01-27 02:23:54 +00:00
gxemul
hatm
hifn
hme
hpt27xx
hptiop
hptmv
hptmv(4): Fix broken sysctl(9) API assumptions
2015-11-07 23:05:23 +00:00
hptnr
hptrr
hwpmc
Welcome the RISC-V 64-bit kernel.
2016-01-29 15:12:31 +00:00
hyperv
hyperv/vmbus: Event handling code refactor.
2016-01-27 03:53:30 +00:00
ic
- Add support for Advantech PCI-1602 Rev. B1 and PCI-1603 cards. [1]
2016-01-10 18:11:23 +00:00
ichiic
Allow building a kernel with baked in ig4, isl and cyapa drivers.
2015-08-19 09:49:29 +00:00
ichsmb
ichwd
Add ichwd TCO version 3 support (Bay Trail / Rangeley...)
2015-08-18 14:54:29 +00:00
ida
ie
if_ndis
net80211 drivers: fix ieee80211_init_channels() usage
2016-01-07 18:41:03 +00:00
iicbus
Use the correct type for i when iterating over buf
to avoid unlikely
2016-01-30 18:33:23 +00:00
iir
intpm
io
ioat
ioat(4): Add support for 'fence' bit with DMA_FENCE flag
2016-01-15 01:34:43 +00:00
ipmi
Remove support for FreeBSD < 602110.
2015-08-30 08:48:31 +00:00
ips
ipw
net80211 & wireless drivers: remove duplicate defines (noop)
2015-09-22 02:44:59 +00:00
isci
Fix typo (s/harware/hardware/)
2015-12-25 14:51:36 +00:00
iscsi
Close iSCSI sessions on shutdown
2016-01-11 10:24:30 +00:00
iscsi_initiator
isl
Allow building a kernel with baked in ig4, isl and cyapa drivers.
2015-08-19 09:49:29 +00:00
ismt
ismt: fix ISMT_DESC_ADDR_RW macro
2016-01-07 21:16:44 +00:00
isp
Allocate separate scratch space for scanner purposes.
2015-12-27 06:28:31 +00:00
ispfw
Rip off target mode support for parallel SCSI QLogic adapters.
2015-11-23 10:06:19 +00:00
iwi
net80211 drivers: fix ieee80211_init_channels() usage
2016-01-07 18:41:03 +00:00
iwm
[iwm] fix up the rate control setup code to initialise rates in the order
2016-01-18 05:43:34 +00:00
iwn
wpi, iwn: implement ic_getradiocaps method
2016-01-12 00:24:40 +00:00
ixgb
ixgbe
Configure ixgbe phy & gbic power
2016-01-31 15:14:23 +00:00
ixl
Fix phy interrupts setup for ixl
2016-01-29 21:06:59 +00:00
jme
joy
kbd
kbdmux
ksyms
le
led
lge
lmc
malo
net80211 drivers: fix ieee80211_init_channels() usage
2016-01-07 18:41:03 +00:00
mbox
mc146818
mca
Convert rman to use rman_res_t instead of u_long
2016-01-27 02:23:54 +00:00
mcd
md
A change to KPI of vm_pager_get_pages() and underlying VOP_GETPAGES().
2015-12-16 21:30:45 +00:00
mdio
[mdio] Add MDIO support for "extended" registers as defined by IEEE 802.3 Clause 45.
2015-12-26 17:22:02 +00:00
mem
mfi
mge
[mdio] migrate mdiobus out of etherswitch and into a top-level device of its own.
2015-12-26 02:31:39 +00:00
mii
Disable EEE(Energy Efficient Ethernet) for RTL8211F PHY.
2015-12-03 05:27:39 +00:00
mk48txx
mlx
mlx5
Fix an issue where the network adapter could be left in down state
2016-01-19 10:24:47 +00:00
mly
mmc
Flag sysctl hw.mmc.debug as a tunable, since often you want to debug the
2015-12-18 01:32:43 +00:00
mn
mpr
Don't retry SAS commands in response to protocol errors
2015-12-14 19:40:47 +00:00
mps
Don't retry SAS commands in response to protocol errors
2015-12-14 19:40:47 +00:00
mpt
- In mpt_send_handshake_cmd(), use bus_space_write_stream_4(9) for writing
2015-07-24 16:00:35 +00:00
mrsas
mse
msk
Set DMA alignment constraint of status, TX and RX LEs(List Elements
2015-08-28 01:32:42 +00:00
mvs
Convert rman to use rman_res_t instead of u_long
2016-01-27 02:23:54 +00:00
mwl
net80211: move ieee80211_free_node() call on error from ic_raw_xmit() to ieee80211_raw_output().
2015-10-12 04:55:20 +00:00
mxge
Add optimizing LRO wrapper:
2016-01-19 15:33:28 +00:00
my
nand
No need to test command values this way. There can be only one, even
2015-12-18 05:55:24 +00:00
ncr
ncv
Convert rman to use rman_res_t instead of u_long
2016-01-27 02:23:54 +00:00
netfpga10g /nf10bmac
netmap
Switch em(4) to the extended RX descriptor format. This matches the
2016-01-07 16:42:48 +00:00
nfe
nfsmb
nge
nmdm
nsp
Convert rman to use rman_res_t instead of u_long
2016-01-27 02:23:54 +00:00
ntb
if_ntb: Don't roundup MW size to full BAR size unnecessarily
2015-12-03 17:22:55 +00:00
null
nvd
nvd: add hw.nvd.delete_max tunable
2016-01-28 23:15:14 +00:00
nvme
Implement power command to list all power modes, find out the power
2016-01-30 22:48:06 +00:00
nvram
nvram2env
nxge
Fix what looks like a consistent copy&paste error.
2015-09-27 12:19:36 +00:00
oce
ofw
Fix the value we print when the size is too large. While here fix the types
2016-01-27 17:47:07 +00:00
otus
net80211 drivers: fix ieee80211_init_channels() usage
2016-01-07 18:41:03 +00:00
ow
Simply to appease gcc's warnings.
2015-08-28 02:29:31 +00:00
patm
Fix LDADD/DPADD that should be LIBADD.
2015-12-04 03:17:47 +00:00
pbio
pccard
Convert rman to use rman_res_t instead of u_long
2016-01-27 02:23:54 +00:00
pccbb
Convert rman to use rman_res_t instead of u_long
2016-01-27 02:23:54 +00:00
pcf
Convert rman to use rman_res_t instead of u_long
2016-01-27 02:23:54 +00:00
pci
Convert rman to use rman_res_t instead of u_long
2016-01-27 02:23:54 +00:00
pcn
pdq
pms
Don't forget to check the vendor when probing. Also, there's no need
2015-08-02 16:26:41 +00:00
powermac_nvram
ppbus
ppc
Convert rman to use rman_res_t instead of u_long
2016-01-27 02:23:54 +00:00
proto
Check the sync operation.
2015-07-28 04:54:05 +00:00
psci
Start to support PSCI 1.0. For all the functions we currently support this
2015-08-11 13:42:58 +00:00
pst
pty
Remove printf only useful for debugging.
2016-01-22 20:28:24 +00:00
puc
Convert rman to use rman_res_t instead of u_long
2016-01-27 02:23:54 +00:00
qlxgb
qlxgbe
Upgrade FW to 5.4.56
2016-01-26 22:32:58 +00:00
qlxge
quicc
Convert rman to use rman_res_t instead of u_long
2016-01-27 02:23:54 +00:00
ral
net80211 drivers: fix ieee80211_init_channels() usage
2016-01-07 18:41:03 +00:00
random
Replace sys/crypto/sha2/sha2.c with lib/libmd/sha512c.c
2015-12-27 17:33:59 +00:00
rc
rccgpio
Fix off-by-one bugs.
2015-09-07 21:59:11 +00:00
re
With r290566 in place it turned out that WOL previously only worked by
2015-11-16 21:13:57 +00:00
rl
- Although it doesn't make a whole lot of sense to enable RX and TX
2015-11-09 00:19:04 +00:00
rndtest
rp
rt
Eliminate code for walking through the early static env data. This code
2016-01-03 14:46:19 +00:00
rtwn
rtwn: do not start vap when initialization fails
2016-01-26 16:50:59 +00:00
safe
sbni
scc
Convert rman to use rman_res_t instead of u_long
2016-01-27 02:23:54 +00:00
scd
sdhci
Move the DRIVER_MODULE() statements that declare mmc(4) to be a child of
2015-12-14 01:09:25 +00:00
sec
Accidentally dropped the 0 padding.
2016-01-01 17:56:52 +00:00
sf
sfxge
Use m_getjcl() instead of manually selecting zone.
2016-01-28 16:51:56 +00:00
sge
si
siba
Convert rman to use rman_res_t instead of u_long
2016-01-27 02:23:54 +00:00
siis
Convert rman to use rman_res_t instead of u_long
2016-01-27 02:23:54 +00:00
sio
sis
sk
smbus
smc
sn
Create a generic PCCARD_PNP_INFO from the MODULE_PNP_INFO building
2015-12-11 05:27:56 +00:00
snc
Convert rman to use rman_res_t instead of u_long
2016-01-27 02:23:54 +00:00
snp
sound
Convert rman to use rman_res_t instead of u_long
2016-01-27 02:23:54 +00:00
speaker
spibus
ste
stg
Convert rman to use rman_res_t instead of u_long
2016-01-27 02:23:54 +00:00
stge
streams
sym
Add the arm64 define.
2015-10-08 17:32:17 +00:00
syscons
Replace the cosine table with a sine table, which (due to the vagaries of
2016-01-02 16:40:37 +00:00
tdfx
terasic
ti
New sendfile(2) syscall. A joint effort of NGINX and Netflix from 2013 and
2016-01-08 20:34:57 +00:00
tl
tpm
trm
tsec
Fix a couple printf formats.
2016-01-01 15:17:24 +00:00
twa
twe
tws
tx
txp
uart
- Make the code consistent with itself style-wise and bring it closer
2016-01-25 22:58:06 +00:00
ubsec
usb
EHCI: Correct address of EHCI_USBMODE_LPM register is 0xC8, not 0xA8.
2016-01-30 08:27:09 +00:00
utopia
vge
viapm
viawd
videomode
virtio
Lower the compiler warning: unused-but-set-variable.
2015-09-03 06:53:17 +00:00
vkbd
vmware /vmxnet3
Only use a power of 2 for the number of receive and transmit queues.
2015-11-16 21:36:50 +00:00
vnic
Fix VNIC enumeration after r294993 and r294990
2016-01-28 16:58:49 +00:00
vr
vt
Make graphical consoles work under PowerKVM. Without using hypercalls, it is
2016-01-09 21:28:56 +00:00
vte
vx
vxge
watchdog
wb
wbwd
wds
wi
Create a generic PCCARD_PNP_INFO from the MODULE_PNP_INFO building
2015-12-11 05:27:56 +00:00
wl
Convert rman to use rman_res_t instead of u_long
2016-01-27 02:23:54 +00:00
wpi
wpi, iwn: implement ic_getradiocaps method
2016-01-12 00:24:40 +00:00
wtap
wtap: do not include <sys/types.h> when <sys/param.h> is already included
2015-12-13 20:53:51 +00:00
xe
Create a generic PCCARD_PNP_INFO from the MODULE_PNP_INFO building
2015-12-11 05:27:56 +00:00
xen
xen-netfront: add multiqueue support
2016-01-20 15:02:43 +00:00
xl