freebsd-dev/sys/dev/iwn/if_iwn_chip_cfg.h
Eitan Adler a0d30ad6a1 iwn: Correct Centrino Advanced-N 6235 constants
The iwn 6235 is a 2x2 device (see
https://ark.intel.com/products/66890/Intel-Centrino-Advanced-N-6235-Dual-Band)

Reviewed by:	adrian, kevans
Obtained from:	Haiku
2018-06-28 21:59:45 +00:00

413 lines
14 KiB
C

/*-
* Copyright (c) 2013 Cedric GROSS <cg@cgross.info>
* Copyright (c) 2011 Intel Corporation
*
* Permission to use, copy, modify, and distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
* $FreeBSD$
*/
#ifndef __IF_IWN_CHIP_CFG_H__
#define __IF_IWN_CHIP_CFG_H__
/* ==========================================================================
* NIC PARAMETERS
*
* ==========================================================================
*/
/*
* Flags for managing calibration result. See calib_need
* in iwn_base_params struct
*
* These are bitmasks that determine which indexes in the calibcmd
* array are pushed up.
*/
#define IWN_FLG_NEED_PHY_CALIB_DC (1<<0)
#define IWN_FLG_NEED_PHY_CALIB_LO (1<<1)
#define IWN_FLG_NEED_PHY_CALIB_TX_IQ (1<<2)
#define IWN_FLG_NEED_PHY_CALIB_TX_IQ_PERIODIC (1<<3)
#define IWN_FLG_NEED_PHY_CALIB_BASE_BAND (1<<4)
/*
* These aren't (yet) included in the calibcmd array, but
* are used as flags for which calibrations to use.
*
* XXX I think they should be named differently and
* stuffed in a different member in the config struct!
*/
#define IWN_FLG_NEED_PHY_CALIB_TEMP_OFFSET (1<<5)
#define IWN_FLG_NEED_PHY_CALIB_CRYSTAL (1<<6)
#define IWN_FLG_NEED_PHY_CALIB_TEMP_OFFSETv2 (1<<7)
/*
* Each chip has a different threshold for PLCP errors that should trigger a
* retune.
*/
#define IWN_PLCP_ERR_DEFAULT_THRESHOLD 50
#define IWN_PLCP_ERR_LONG_THRESHOLD 100
#define IWN_PLCP_ERR_EXT_LONG_THRESHOLD 200
/*
* Define some parameters for managing different NIC.
* Refer to linux specific file like iwl-xxxx.c to determine correct value
* for NIC.
*
* @max_ll_items: max number of OTP blocks
* @shadow_ram_support: shadow support for OTP memory
* @shadow_reg_enable: HW shadhow register bit
* @no_idle_support: do not support idle mode
* @advanced_bt_coexist : Advanced BT management
* @bt_session_2 : NIC need a new struct for configure BT coexistence. Needed
* only if advanced_bt_coexist is true
* @bt_sco_disable :
* @additional_nic_config: For 6005 series
* @iq_invert : ? But need it for N 2000 series
* @regulatory_bands : XXX
* @enhanced_TX_power : EEPROM Has advanced TX power options. Set 'True'
* if update_enhanced_txpower = iwl_eeprom_enhanced_txpower.
* See iwl-agn-devices.c file to determine that(enhanced_txpower)
* @need_temp_offset_calib : Need to compute some temp offset for calibration.
* @calib_need : Use IWN_FLG_NEED_PHY_CALIB_* flags to specify which
* calibration data ucode need. See calib_init_cfg in iwl-xxxx.c
* linux kernel file
* @support_hostap: Define IEEE80211_C_HOSTAP for ic_caps
* @no_multi_vaps: See iwn_vap_create
* @additional_gp_drv_bit : Specific bit to defined during nic_config
* @bt_mode: BT configuration mode
*/
enum bt_mode_enum {
IWN_BT_NONE,
IWN_BT_SIMPLE,
IWN_BT_ADVANCED
};
struct iwn_base_params {
uint32_t pll_cfg_val;
const uint16_t max_ll_items;
#define IWN_OTP_MAX_LL_ITEMS_1000 (3) /* OTP blocks for 1000 */
#define IWN_OTP_MAX_LL_ITEMS_6x00 (4) /* OTP blocks for 6x00 */
#define IWN_OTP_MAX_LL_ITEMS_6x50 (7) /* OTP blocks for 6x50 */
#define IWN_OTP_MAX_LL_ITEMS_2x00 (4) /* OTP blocks for 2x00 */
const bool shadow_ram_support;
const bool shadow_reg_enable;
const bool bt_session_2;
const bool bt_sco_disable;
const bool additional_nic_config;
const uint32_t *regulatory_bands;
const bool enhanced_TX_power;
const uint16_t calib_need;
const bool support_hostap;
const bool no_multi_vaps;
uint8_t additional_gp_drv_bit;
enum bt_mode_enum bt_mode;
uint32_t plcp_err_threshold;
};
static const struct iwn_base_params iwn5000_base_params = {
.pll_cfg_val = IWN_ANA_PLL_INIT, /* pll_cfg_val; */
.max_ll_items = IWN_OTP_MAX_LL_ITEMS_6x00, /* max_ll_items */
.shadow_ram_support = false, /* shadow_ram_support */
.shadow_reg_enable = false, /* shadow_reg_enable */
.bt_session_2 = false, /* bt_session_2 */
.bt_sco_disable = true, /* bt_sco_disable */
.additional_nic_config = false, /* additional_nic_config */
.regulatory_bands = iwn5000_regulatory_bands, /* regulatory_bands */
.enhanced_TX_power = false, /* enhanced_TX_power */
.calib_need =
( IWN_FLG_NEED_PHY_CALIB_LO
| IWN_FLG_NEED_PHY_CALIB_TX_IQ_PERIODIC
| IWN_FLG_NEED_PHY_CALIB_TX_IQ
| IWN_FLG_NEED_PHY_CALIB_BASE_BAND ),
.support_hostap = false, /* support_hostap */
.no_multi_vaps = true, /* no_multi_vaps */
.additional_gp_drv_bit = IWN_GP_DRIVER_NONE, /* additional_gp_drv_bit */
.bt_mode = IWN_BT_NONE, /* bt_mode */
.plcp_err_threshold = IWN_PLCP_ERR_LONG_THRESHOLD,
};
/*
* 4965 support
*/
static const struct iwn_base_params iwn4965_base_params = {
.pll_cfg_val = 0, /* pll_cfg_val; */
.max_ll_items = IWN_OTP_MAX_LL_ITEMS_6x00, /* max_ll_items - ignored for 4965 */
.shadow_ram_support = true, /* shadow_ram_support */
.shadow_reg_enable = false, /* shadow_reg_enable */
.bt_session_2 = false, /* bt_session_2 XXX unknown? */
.bt_sco_disable = true, /* bt_sco_disable XXX unknown? */
.additional_nic_config = false, /* additional_nic_config - not for 4965 */
.regulatory_bands = iwn5000_regulatory_bands, /* regulatory_bands */
.enhanced_TX_power = false, /* enhanced_TX_power - not for 4965 */
.calib_need =
(IWN_FLG_NEED_PHY_CALIB_DC
| IWN_FLG_NEED_PHY_CALIB_LO
| IWN_FLG_NEED_PHY_CALIB_TX_IQ_PERIODIC
| IWN_FLG_NEED_PHY_CALIB_TX_IQ
| IWN_FLG_NEED_PHY_CALIB_BASE_BAND ),
.support_hostap = false, /* support_hostap - XXX should work on fixing! */
.no_multi_vaps = true, /* no_multi_vaps - XXX should work on fixing! */
.additional_gp_drv_bit = IWN_GP_DRIVER_NONE, /* additional_gp_drv_bit */
.bt_mode = IWN_BT_SIMPLE, /* bt_mode */
.plcp_err_threshold = IWN_PLCP_ERR_DEFAULT_THRESHOLD,
};
static const struct iwn_base_params iwn2000_base_params = {
.pll_cfg_val = 0,
.max_ll_items = IWN_OTP_MAX_LL_ITEMS_2x00,
.shadow_ram_support = true,
.shadow_reg_enable = false,
.bt_session_2 = false,
.bt_sco_disable = true,
.additional_nic_config = false,
.regulatory_bands = iwn2030_regulatory_bands,
.enhanced_TX_power = true,
.calib_need =
(IWN_FLG_NEED_PHY_CALIB_DC
| IWN_FLG_NEED_PHY_CALIB_LO
| IWN_FLG_NEED_PHY_CALIB_TX_IQ
| IWN_FLG_NEED_PHY_CALIB_BASE_BAND
| IWN_FLG_NEED_PHY_CALIB_TEMP_OFFSETv2 ),
.support_hostap = true,
.no_multi_vaps = false,
.additional_gp_drv_bit = IWN_GP_DRIVER_REG_BIT_RADIO_IQ_INVERT,
.bt_mode = IWN_BT_NONE,
.plcp_err_threshold = IWN_PLCP_ERR_DEFAULT_THRESHOLD,
};
static const struct iwn_base_params iwn2030_base_params = {
.pll_cfg_val = 0,
.max_ll_items = IWN_OTP_MAX_LL_ITEMS_2x00,
.shadow_ram_support = true,
.shadow_reg_enable = false, /* XXX check? */
.bt_session_2 = true,
.bt_sco_disable = true,
.additional_nic_config = false,
.regulatory_bands = iwn2030_regulatory_bands,
.enhanced_TX_power = true,
.calib_need =
(IWN_FLG_NEED_PHY_CALIB_DC
| IWN_FLG_NEED_PHY_CALIB_LO
| IWN_FLG_NEED_PHY_CALIB_TX_IQ
| IWN_FLG_NEED_PHY_CALIB_BASE_BAND
| IWN_FLG_NEED_PHY_CALIB_TEMP_OFFSETv2 ),
.support_hostap = true,
.no_multi_vaps = false,
.additional_gp_drv_bit = IWN_GP_DRIVER_REG_BIT_RADIO_IQ_INVERT,
.bt_mode = IWN_BT_ADVANCED,
.plcp_err_threshold = IWN_PLCP_ERR_DEFAULT_THRESHOLD,
};
static const struct iwn_base_params iwn1000_base_params = {
.pll_cfg_val = IWN_ANA_PLL_INIT,
.max_ll_items = IWN_OTP_MAX_LL_ITEMS_1000,
.shadow_ram_support = false,
.shadow_reg_enable = false, /* XXX check? */
.bt_session_2 = false,
.bt_sco_disable = false,
.additional_nic_config = false,
.regulatory_bands = iwn5000_regulatory_bands,
.enhanced_TX_power = false,
.calib_need =
( IWN_FLG_NEED_PHY_CALIB_LO
| IWN_FLG_NEED_PHY_CALIB_TX_IQ_PERIODIC
| IWN_FLG_NEED_PHY_CALIB_TX_IQ
| IWN_FLG_NEED_PHY_CALIB_BASE_BAND
),
.support_hostap = false,
.no_multi_vaps = true,
.additional_gp_drv_bit = IWN_GP_DRIVER_NONE,
/* XXX 1000 - no BT */
.bt_mode = IWN_BT_SIMPLE,
.plcp_err_threshold = IWN_PLCP_ERR_EXT_LONG_THRESHOLD,
};
static const struct iwn_base_params iwn_6000_base_params = {
.pll_cfg_val = 0,
.max_ll_items = IWN_OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
.shadow_reg_enable = true,
.bt_session_2 = false,
.bt_sco_disable = false,
.additional_nic_config = false,
.regulatory_bands = iwn6000_regulatory_bands,
.enhanced_TX_power = true,
.calib_need =
(IWN_FLG_NEED_PHY_CALIB_DC
| IWN_FLG_NEED_PHY_CALIB_LO
| IWN_FLG_NEED_PHY_CALIB_TX_IQ
| IWN_FLG_NEED_PHY_CALIB_BASE_BAND ),
.support_hostap = false,
.no_multi_vaps = true,
.additional_gp_drv_bit = IWN_GP_DRIVER_NONE,
.bt_mode = IWN_BT_SIMPLE,
.plcp_err_threshold = IWN_PLCP_ERR_DEFAULT_THRESHOLD,
};
static const struct iwn_base_params iwn_6000i_base_params = {
.pll_cfg_val = 0,
.max_ll_items = IWN_OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
.shadow_reg_enable = true,
.bt_session_2 = false,
.bt_sco_disable = true,
.additional_nic_config = false,
.regulatory_bands = iwn6000_regulatory_bands,
.enhanced_TX_power = true,
.calib_need =
(IWN_FLG_NEED_PHY_CALIB_DC
| IWN_FLG_NEED_PHY_CALIB_LO
| IWN_FLG_NEED_PHY_CALIB_TX_IQ
| IWN_FLG_NEED_PHY_CALIB_BASE_BAND ),
.support_hostap = false,
.no_multi_vaps = true,
.additional_gp_drv_bit = IWN_GP_DRIVER_NONE,
.bt_mode = IWN_BT_SIMPLE,
.plcp_err_threshold = IWN_PLCP_ERR_DEFAULT_THRESHOLD,
};
static const struct iwn_base_params iwn_6000g2_base_params = {
.pll_cfg_val = 0,
.max_ll_items = IWN_OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
.shadow_reg_enable = true,
.bt_session_2 = false,
.bt_sco_disable = true,
.additional_nic_config = false,
.regulatory_bands = iwn6000_regulatory_bands,
.enhanced_TX_power = true,
.calib_need =
(IWN_FLG_NEED_PHY_CALIB_DC
| IWN_FLG_NEED_PHY_CALIB_LO
| IWN_FLG_NEED_PHY_CALIB_TX_IQ
| IWN_FLG_NEED_PHY_CALIB_BASE_BAND
| IWN_FLG_NEED_PHY_CALIB_TEMP_OFFSET ),
.support_hostap = false,
.no_multi_vaps = true,
.additional_gp_drv_bit = 0,
.bt_mode = IWN_BT_SIMPLE,
.plcp_err_threshold = IWN_PLCP_ERR_DEFAULT_THRESHOLD,
};
static const struct iwn_base_params iwn_6050_base_params = {
.pll_cfg_val = 0,
.max_ll_items = IWN_OTP_MAX_LL_ITEMS_6x50,
.shadow_ram_support = true,
.shadow_reg_enable = true,
.bt_session_2 = false,
.bt_sco_disable = true,
.additional_nic_config = true,
.regulatory_bands = iwn6000_regulatory_bands,
.enhanced_TX_power = true,
.calib_need =
(IWN_FLG_NEED_PHY_CALIB_LO
| IWN_FLG_NEED_PHY_CALIB_TX_IQ
| IWN_FLG_NEED_PHY_CALIB_BASE_BAND ),
.support_hostap = false,
.no_multi_vaps = true,
.additional_gp_drv_bit = IWN_GP_DRIVER_NONE,
.bt_mode = IWN_BT_SIMPLE,
.plcp_err_threshold = IWN_PLCP_ERR_DEFAULT_THRESHOLD,
};
static const struct iwn_base_params iwn_6150_base_params = {
.pll_cfg_val = 0,
.max_ll_items = IWN_OTP_MAX_LL_ITEMS_6x50,
.shadow_ram_support = true,
.shadow_reg_enable = true,
.bt_session_2 = false,
.bt_sco_disable = true,
.additional_nic_config = true,
.regulatory_bands = iwn6000_regulatory_bands,
.enhanced_TX_power = true,
.calib_need =
(IWN_FLG_NEED_PHY_CALIB_LO
| IWN_FLG_NEED_PHY_CALIB_TX_IQ
| IWN_FLG_NEED_PHY_CALIB_BASE_BAND),
.support_hostap = false,
.no_multi_vaps = true,
.additional_gp_drv_bit = IWN_GP_DRIVER_6050_1X2,
.bt_mode = IWN_BT_SIMPLE,
.plcp_err_threshold = IWN_PLCP_ERR_DEFAULT_THRESHOLD,
};
/* IWL_DEVICE_6035 & IWL_DEVICE_6030 */
static const struct iwn_base_params iwn_6000g2b_base_params = {
.pll_cfg_val = 0,
.max_ll_items = IWN_OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
.shadow_reg_enable = true,
.bt_session_2 = false,
.bt_sco_disable = true,
.additional_nic_config = false,
.regulatory_bands = iwn6000_regulatory_bands,
.enhanced_TX_power = true,
.calib_need =
(IWN_FLG_NEED_PHY_CALIB_DC
| IWN_FLG_NEED_PHY_CALIB_LO
| IWN_FLG_NEED_PHY_CALIB_TX_IQ
| IWN_FLG_NEED_PHY_CALIB_BASE_BAND
| IWN_FLG_NEED_PHY_CALIB_TEMP_OFFSET ),
.support_hostap = false,
.no_multi_vaps = true,
.additional_gp_drv_bit = IWN_GP_DRIVER_NONE,
.bt_mode = IWN_BT_ADVANCED,
.plcp_err_threshold = IWN_PLCP_ERR_DEFAULT_THRESHOLD,
};
/*
* 6235 series NICs.
*/
static const struct iwn_base_params iwn_6235_base_params = {
.pll_cfg_val = 0,
.max_ll_items = IWN_OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
.shadow_reg_enable = true,
.bt_session_2 = false,
.bt_sco_disable = true,
.additional_nic_config = true,
.regulatory_bands = iwn6000_regulatory_bands,
.enhanced_TX_power = true,
.calib_need =
(IWN_FLG_NEED_PHY_CALIB_DC
| IWN_FLG_NEED_PHY_CALIB_LO
| IWN_FLG_NEED_PHY_CALIB_TX_IQ
| IWN_FLG_NEED_PHY_CALIB_BASE_BAND
| IWN_FLG_NEED_PHY_CALIB_TEMP_OFFSET ),
.support_hostap = false,
.no_multi_vaps = true,
.additional_gp_drv_bit = 0,
.bt_mode = IWN_BT_ADVANCED,
.plcp_err_threshold = IWN_PLCP_ERR_DEFAULT_THRESHOLD,
};
static const struct iwn_base_params iwn_5x50_base_params = {
.pll_cfg_val = IWN_ANA_PLL_INIT,
.max_ll_items = IWN_OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
.shadow_reg_enable = false,
.bt_session_2 = false,
.bt_sco_disable = true,
.additional_nic_config = false,
.regulatory_bands = iwn5000_regulatory_bands,
.enhanced_TX_power =false,
.calib_need =
(IWN_FLG_NEED_PHY_CALIB_DC
| IWN_FLG_NEED_PHY_CALIB_LO
| IWN_FLG_NEED_PHY_CALIB_TX_IQ
| IWN_FLG_NEED_PHY_CALIB_BASE_BAND ),
.support_hostap = false,
.no_multi_vaps = true,
.additional_gp_drv_bit = IWN_GP_DRIVER_NONE,
.bt_mode = IWN_BT_SIMPLE,
.plcp_err_threshold = IWN_PLCP_ERR_LONG_THRESHOLD,
};
#endif /* __IF_IWN_CHIP_CFG_H__ */