freebsd-dev/sys/pci
Peter Wemm 269a49497f Remove #include "wd.h" and #if NWDC > 0 as that's always true as this
file is 'optional wdc'  (note wd.h has both NWDC and NWD in it because
of config quirks)
2000-01-29 16:59:53 +00:00
..
adw_pci.c
alpm.c Remove the 'ivars' arguement to device_add_child() and 1999-12-03 08:41:24 +00:00
amd.c The error status for a scsi status error is "CAM_SCSI_STATUS_ERROR", not 0. 2000-01-14 03:39:30 +00:00
amd.h
cy_pci.c
cy_pcireg.h
dc21040reg.h
ida_pci.c
ide_pci.c Remove #include "wd.h" and #if NWDC > 0 as that's always true as this 2000-01-29 16:59:53 +00:00
ide_pcireg.h
if_ar_p.c
if_dc.c Add support for DM9102A boards with Davicom DM9801 HomePNA PHYs. 2000-01-24 17:19:37 +00:00
if_dcreg.h Add support for the Davicom DM9102A 10/100 ethernet controller chip. 2000-01-19 19:03:08 +00:00
if_de.c
if_devar.h
if_en_pci.c
if_fxp.c
if_fxpreg.h
if_fxpvar.h
if_lnc_p.c
if_mn.c Change #ifdef KERNEL to #ifdef _KERNEL in the public headers. "KERNEL" 1999-12-29 05:07:58 +00:00
if_rl.c Fix a small typo in the comments. 1999-12-28 06:04:29 +00:00
if_rlreg.h
if_sf.c Modify the Adaptec "starfire" driver to reset the PHY on the MII bus 1999-12-05 20:02:45 +00:00
if_sfreg.h Modify the Adaptec "starfire" driver to reset the PHY on the MII bus 1999-12-05 20:02:45 +00:00
if_sis.c
if_sisreg.h
if_sk.c
if_skreg.h
if_sr_p.c
if_ste.c Spruce up the Sundance ST201 driver: 1999-12-07 20:14:42 +00:00
if_stereg.h Spruce up the Sundance ST201 driver: 1999-12-07 20:14:42 +00:00
if_ti.c Add the vendor/device ID for the Farallon PN9000SX gigabit ethernet 2000-01-18 00:26:29 +00:00
if_tireg.h Add the vendor/device ID for the Farallon PN9000SX gigabit ethernet 2000-01-18 00:26:29 +00:00
if_tl.c Fix the tl driver so it doesn't run off the end of the RX descriptor list 2000-01-15 20:14:49 +00:00
if_tlreg.h
if_tx.c Change incorrect NULLs to 0s 1999-12-21 11:14:12 +00:00
if_txvar.h
if_vr.c
if_vrreg.h
if_wb.c
if_wbreg.h
if_wx.c put things in place for jumbograms 2000-01-25 06:09:53 +00:00
if_wxreg.h define jumbo packet size 2000-01-25 04:11:33 +00:00
if_wxvar.h add PREVIOUS index macro for transmit side 2000-01-23 03:18:14 +00:00
if_xl.c Close PR# 15986: issue an RX reset command when initializing the interface, 2000-01-09 21:12:59 +00:00
if_xlreg.h Update the xl driver to recognize yet another 3c905B/3c905C class NIC: 1999-12-16 18:33:57 +00:00
intpm.c Remove the 'ivars' arguement to device_add_child() and 1999-12-03 08:41:24 +00:00
intpmreg.h
isp_pci.c Remove compile warning not seen when compiling with target mode enabled. 2000-01-15 07:06:44 +00:00
locate.pl
meteor_reg.h
meteor.c
ncr.c Add 53C895A and 53C1510D device description to the ncr chip table. 2000-01-23 12:27:49 +00:00
ncrreg.h
ohci_pci.c Properly teardown the allocated and initialised stuff when an error 2000-01-26 10:52:27 +00:00
pccbb.c Initial import of cardbus bridge driver (cbb) from the latest 1999-11-18 07:14:54 +00:00
pccbbreg.h Initial import of cardbus bridge driver (cbb) from the latest 1999-11-18 07:14:54 +00:00
pccbbvar.h Initial import of cardbus bridge driver (cbb) from the latest 1999-11-18 07:14:54 +00:00
pci_compat.c Zap pci_map_dense() and pci_map_bwx() - they were for compatability but 2000-01-05 16:40:10 +00:00
pci_if.m
pci.c Put a FYI in the compatability shims so that people are aware that they 2000-01-29 15:37:36 +00:00
pcic_p.c Fill in the blanks for some of the Texas Instruments cardbus controllers. 1999-12-31 07:22:24 +00:00
pcic_p.h Fill in the blanks for some of the Texas Instruments cardbus controllers. 1999-12-31 07:22:24 +00:00
pcireg.h Added PCIR_BIOS (0x30). 2000-01-10 12:53:19 +00:00
pcisupport.c Add more PCI VGA graphics card descriptions. 2000-01-27 12:02:06 +00:00
pcivar.h Clean up the cfgmech/pci_mechanism debris. The reason for the existance 2000-01-08 08:31:24 +00:00
scsiiom.c
simos.c
simos.h
ti_fw2.h
ti_fw.h
uhci_pci.c Properly teardown the allocated and initialised stuff when an error 2000-01-26 10:52:27 +00:00
xmaciireg.h
xrpu.c