freebsd-dev/sys/contrib/octeon-sdk/cvmx-debug.h
Juli Mallett dc4ee6ca91 Merge the Cavium Octeon SDK 2.3.0 Simple Executive code and update FreeBSD to
make use of it where possible.

This primarily brings in support for newer hardware, and FreeBSD is not yet
able to support the abundance of IRQs on new hardware and many features in the
Ethernet driver.

Because of the changes to IRQs in the Simple Executive, we have to maintain our
own list of Octeon IRQs now, which probably can be pared-down and be specific
to the CIU interrupt unit soon, and when other interrupt mechanisms are added
they can maintain their own definitions.

Remove unmasking of interrupts from within the UART device now that the
function used is no longer present in the Simple Executive.  The unmasking
seems to have been gratuitous as this is more properly handled by the buses
above the UART device, and seems to work on that basis.
2012-03-11 06:17:49 +00:00

455 lines
22 KiB
C

/***********************license start***************
* Copyright (c) 2003-2010 Cavium Inc. (support@cavium.com). All rights
* reserved.
*
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* * Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials provided
* with the distribution.
* * Neither the name of Cavium Inc. nor the names of
* its contributors may be used to endorse or promote products
* derived from this software without specific prior written
* permission.
* This Software, including technical data, may be subject to U.S. export control
* laws, including the U.S. Export Administration Act and its associated
* regulations, and may be subject to export or import regulations in other
* countries.
* TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
* AND WITH ALL FAULTS AND CAVIUM INC. MAKES NO PROMISES, REPRESENTATIONS OR
* WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO
* THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION OR
* DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM
* SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE,
* MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF
* VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
* CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK ARISING OUT OF USE OR
* PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
***********************license end**************************************/
/**
* @file
*
* Interface to debug exception handler
*
* <hr>$Revision: $<hr>
*/
#ifndef __CVMX_DEBUG_H__
#define __CVMX_DEBUG_H__
#include "cvmx-core.h"
#include "cvmx-spinlock.h"
#define CVMX_DEBUG_MAX_REQUEST_SIZE 1024 + 34 /* Enough room for setting memory of 512 bytes. */
#define CVMX_DEBUG_MAX_RESPONSE_SIZE 1024 + 5
#define CVMX_DEBUG_GLOBALS_BLOCK_NAME "cvmx-debug-globals"
#define CVMX_DEBUG_GLOBALS_VERSION 3
#ifdef __cplusplus
extern "C" {
#endif
void cvmx_debug_init(void);
void cvmx_debug_finish(void);
void cvmx_debug_trigger_exception(void);
#ifdef CVMX_BUILD_FOR_TOOLCHAIN
extern int __octeon_debug_booted;
static inline int cvmx_debug_booted(void)
{
return __octeon_debug_booted;
}
#else
static inline int cvmx_debug_booted(void)
{
return cvmx_sysinfo_get()->bootloader_config_flags & CVMX_BOOTINFO_CFG_FLAG_DEBUG;
}
#endif
/* There are 64 TLB entries in CN5XXX and 32 TLB entries in CN3XXX and
128 TLB entries in CN6XXX. */
#define CVMX_DEBUG_N_TLB_ENTRIES 128
/* Maximium number of hardware breakpoints/watchpoints allowed */
#define CVMX_DEBUG_MAX_OCTEON_HW_BREAKPOINTS 4
typedef struct
{
volatile uint64_t remote_controlled;
uint64_t regs[32];
uint64_t lo;
uint64_t hi;
#define CVMX_DEBUG_BASIC_CONTEXT \
F(remote_controlled); \
{ int i; \
for (i = 0; i < 32; i++) \
F(regs[i]); \
} \
F(lo); \
F(hi);
struct {
uint64_t index;
uint64_t entrylo[2];
uint64_t entryhi;
uint64_t pagemask;
uint64_t status;
uint64_t badvaddr;
uint64_t cause;
uint64_t depc;
uint64_t desave;
uint64_t debug;
uint64_t multicoredebug;
uint64_t perfval[2];
uint64_t perfctrl[2];
} cop0;
#define CVMX_DEBUG_COP0_CONTEXT \
F(cop0.index); \
F(cop0.entrylo[0]); \
F(cop0.entrylo[1]); \
F(cop0.entryhi); \
F(cop0.pagemask); \
F(cop0.status); \
F(cop0.badvaddr); \
F(cop0.cause); \
F(cop0.depc); \
F(cop0.desave); \
F(cop0.debug); \
F(cop0.multicoredebug); \
F(cop0.perfval[0]); \
F(cop0.perfval[1]); \
F(cop0.perfctrl[0]); \
F(cop0.perfctrl[1]);
struct
{
uint64_t status;
uint64_t address[4];
uint64_t address_mask[4];
uint64_t asid[4];
uint64_t control[4];
} hw_ibp, hw_dbp;
/* Hardware Instruction Break Point */
#define CVMX_DEBUG_HW_IBP_CONTEXT \
F(hw_ibp.status); \
F(hw_ibp.address[0]); \
F(hw_ibp.address[1]); \
F(hw_ibp.address[2]); \
F(hw_ibp.address[3]); \
F(hw_ibp.address_mask[0]); \
F(hw_ibp.address_mask[1]); \
F(hw_ibp.address_mask[2]); \
F(hw_ibp.address_mask[3]); \
F(hw_ibp.asid[0]); \
F(hw_ibp.asid[1]); \
F(hw_ibp.asid[2]); \
F(hw_ibp.asid[3]); \
F(hw_ibp.control[0]); \
F(hw_ibp.control[1]); \
F(hw_ibp.control[2]); \
F(hw_ibp.control[3]);
/* Hardware Data Break Point */
#define CVMX_DEBUG_HW_DBP_CONTEXT \
F(hw_dbp.status); \
F(hw_dbp.address[0]); \
F(hw_dbp.address[1]); \
F(hw_dbp.address[2]); \
F(hw_dbp.address[3]); \
F(hw_dbp.address_mask[0]); \
F(hw_dbp.address_mask[1]); \
F(hw_dbp.address_mask[2]); \
F(hw_dbp.address_mask[3]); \
F(hw_dbp.asid[0]); \
F(hw_dbp.asid[1]); \
F(hw_dbp.asid[2]); \
F(hw_dbp.asid[3]); \
F(hw_dbp.control[0]); \
F(hw_dbp.control[1]); \
F(hw_dbp.control[2]); \
F(hw_dbp.control[3]);
struct cvmx_debug_tlb_t
{
uint64_t entryhi;
uint64_t pagemask;
uint64_t entrylo[2];
uint64_t reserved;
} tlbs[CVMX_DEBUG_N_TLB_ENTRIES];
#define CVMX_DEBUG_TLB_CONTEXT \
{ int i; \
for (i = 0; i < CVMX_DEBUG_N_TLB_ENTRIES; i++) \
{ \
F(tlbs[i].entryhi); \
F(tlbs[i].pagemask); \
F(tlbs[i].entrylo[0]); \
F(tlbs[i].entrylo[1]); \
} \
}
} cvmx_debug_core_context_t;
typedef struct cvmx_debug_tlb_t cvmx_debug_tlb_t;
typedef enum cvmx_debug_comm_type_e
{
COMM_UART,
COMM_REMOTE,
COMM_SIZE
}cvmx_debug_comm_type_t;
typedef enum
{
COMMAND_NOP = 0, /**< Core doesn't need to do anything. Just stay in exception handler */
COMMAND_STEP, /**< Core needs to perform a single instruction step */
COMMAND_CONTINUE /**< Core need to start running. Doesn't return until some debug event occurs */
} cvmx_debug_command_t;
/* Every field in this struct has to be uint32_t. */
typedef struct
{
uint32_t known_cores;
uint32_t step_isr; /**< True if we are going to step into ISR's. */
uint32_t focus_switch; /**< Focus can be switched. */
uint32_t core_finished; /**< True if a core has finished and not been processed yet. */
uint32_t command; /**< Command for all cores (cvmx_debug_command_t) */
uint32_t step_all; /**< True if step and continue should affect all cores. False, only the focus core is affected */
uint32_t focus_core; /**< Core currently under control of the debugger */
uint32_t active_cores; /**< Bitmask of cores that should stop on a breakpoint */
uint32_t handler_cores; /**< Bitmask of cores currently running the exception handler */
uint32_t ever_been_in_debug; /**< True if we have been ever been in the debugger stub at all. */
}__attribute__ ((aligned(sizeof(uint64_t)))) cvmx_debug_state_t;
typedef int cvmx_debug_state_t_should_fit_inside_a_cache_block[sizeof(cvmx_debug_state_t)+sizeof(cvmx_spinlock_t)+4*sizeof(uint64_t) > 128 ? -1 : 1];
typedef struct cvmx_debug_globals_s
{
uint64_t version; /* This is always the first element of this struct */
uint64_t comm_type; /* cvmx_debug_comm_type_t */
volatile uint64_t comm_changed; /* cvmx_debug_comm_type_t+1 when someone wants to change it. */
volatile uint64_t init_complete;
uint32_t tlb_entries;
uint32_t state[sizeof(cvmx_debug_state_t)/sizeof(uint32_t)];
cvmx_spinlock_t lock;
volatile cvmx_debug_core_context_t contextes[CVMX_MAX_CORES];
} cvmx_debug_globals_t;
typedef union
{
uint64_t u64;
struct
{
uint64_t rsrvd:32; /**< Unused */
uint64_t dbd:1; /**< Indicates whether the last debug exception or
exception in Debug Mode occurred in a branch or
jump delay slot */
uint64_t dm:1; /**< Indicates that the processor is operating in Debug
Mode: */
uint64_t nodcr:1; /**< Indicates whether the dseg segment is present */
uint64_t lsnm:1; /**< Controls access of loads/stores between the dseg
segment and remaining memory when the dseg
segment is present */
uint64_t doze:1; /**< Indicates that the processor was in a low-power mode
when a debug exception occurred */
uint64_t halt:1; /**< Indicates that the internal processor system bus clock
was stopped when the debug exception occurred */
uint64_t countdm:1; /**< Controls or indicates the Count register behavior in
Debug Mode. Implementations can have fixed
behavior, in which case this bit is read-only (R), or
the implementation can allow this bit to control the
behavior, in which case this bit is read/write (R/W).
The reset value of this bit indicates the behavior after
reset, and depends on the implementation.
Encoding of the bit is:
- 0 Count register stopped in Debug Mode Count register is running in Debug
- 1 Mode
This bit is read-only (R) and reads as zero if not implemented. */
uint64_t ibusep:1; /**< Indicates if a Bus Error exception is pending from an
instruction fetch. Set when an instruction fetch bus
error event occurs or a 1 is written to the bit by
software. Cleared when a Bus Error exception on an
instruction fetch is taken by the processor. If IBusEP
is set when IEXI is cleared, a Bus Error exception on
an instruction fetch is taken by the processor, and
IBusEP is cleared.
In Debug Mode, a Bus Error exception applies to a
Debug Mode Bus Error exception.
This bit is read-only (R) and reads as zero if not
implemented. */
uint64_t mcheckp:1; /**< Indicates if a Machine Check exception is pending.
Set when a machine check event occurs or a 1 is
written to the bit by software. Cleared when a
Machine Check exception is taken by the processor.
If MCheckP is set when IEXI is cleared, a Machine
Check exception is taken by the processor, and
MCheckP is cleared.
In Debug Mode, a Machine Check exception applies
to a Debug Mode Machine Check exception.
This bit is read-only (R) and reads as zero if not
implemented. */
uint64_t cacheep:1; /**< Indicates if a Cache Error is pending. Set when a
cache error event occurs or a 1 is written to the bit by
software. Cleared when a Cache Error exception is
taken by the processor. If CacheEP is set when IEXI
is cleared, a Cache Error exception is taken by the
processor, and CacheEP is cleared.
In Debug Mode, a Cache Error exception applies to a
Debug Mode Cache Error exception.
This bit is read-only (R) and reads as zero if not
implemented. */
uint64_t dbusep:1; /**< Indicates if a Data Access Bus Error exception is
pending. Set when a data access bus error event
occurs or a 1 is written to the bit by software. Cleared
when a Bus Error exception on data access is taken by
the processor. If DBusEP is set when IEXI is cleared,
a Bus Error exception on data access is taken by the
processor, and DBusEP is cleared.
In Debug Mode, a Bus Error exception applies to a
Debug Mode Bus Error exception.
This bit is read-only (R) and reads as zero if not
implemented. */
uint64_t iexi:1; /**< An Imprecise Error eXception Inhibit (IEXI) controls
exceptions taken due to imprecise error indications.
Set when the processor takes a debug exception or an
exception in Debug Mode occurs. Cleared by
execution of the DERET instruction. Otherwise
modifiable by Debug Mode software.
When IEXI is set, then the imprecise error exceptions
from bus errors on instruction fetches or data
accesses, cache errors, or machine checks are
inhibited and deferred until the bit is cleared.
This bit is read-only (R) and reads as zero if not
implemented. */
uint64_t ddbsimpr:1; /**< Indicates that a Debug Data Break Store Imprecise
exception due to a store was the cause of the debug
exception, or that an imprecise data hardware break
due to a store was indicated after another debug
exception occurred. Cleared on exception in Debug
Mode.
- 0 No match of an imprecise data hardware breakpoint on store
- 1 Match of imprecise data hardware breakpoint on store
This bit is read-only (R) and reads as zero if not
implemented. */
uint64_t ddblimpr:1; /**< Indicates that a Debug Data Break Load Imprecise
exception due to a load was the cause of the debug
exception, or that an imprecise data hardware break
due to a load was indicated after another debug
exception occurred. Cleared on exception in Debug
Mode.
- 0 No match of an imprecise data hardware breakpoint on load
- 1 Match of imprecise data hardware breakpoint on load
This bit is read-only (R) and reads as zero if not
implemented. */
uint64_t ejtagver:3; /**< Provides the EJTAG version.
- 0 Version 1 and 2.0
- 1 Version 2.5
- 2 Version 2.6
- 3-7 Reserved */
uint64_t dexccode:5; /**< Indicates the cause of the latest exception in Debug
Mode.
The field is encoded as the ExcCode field in the
Cause register for those exceptions that can occur in
Debug Mode (the encoding is shown in MIPS32 and
MIPS64 specifications), with addition of code 30
with the mnemonic CacheErr for cache errors and the
use of code 9 with mnemonic Bp for the SDBBP
instruction.
This value is undefined after a debug exception. */
uint64_t nosst:1; /**< Indicates whether the single-step feature controllable
by the SSt bit is available in this implementation:
- 0 Single-step feature available
- 1 No single-step feature available
A minimum number of hardware instruction
breakpoints must be available if no single-step
feature is implemented in hardware. Refer to Section
4.8.1 on page 69 for more information. */
uint64_t sst:1; /**< Controls whether single-step feature is enabled:
- 0 No enable of single-step feature
- 1 Single-step feature enabled
This bit is read-only (R) and reads as zero if not
implemented due to no single-step feature (NoSSt is
1). */
uint64_t rsrvd2:2; /**< Must be zero */
uint64_t dint:1; /**< Indicates that a Debug Interrupt exception occurred.
Cleared on exception in Debug Mode.
- 0 No Debug Interrupt exception
- 1 Debug Interrupt exception
This bit is read-only (R) and reads as zero if not
implemented. */
uint64_t dib:1; /**< Indicates that a Debug Instruction Break exception
occurred. Cleared on exception in Debug Mode.
- 0 No Debug Instruction Break exception
- 1 Debug Instruction Break exception
This bit is read-only (R) and reads as zero if not
implemented. */
uint64_t ddbs:1; /**< Indicates that a Debug Data Break Store exception
occurred on a store due to a precise data hardware
break. Cleared on exception in Debug Mode.
- 0 No Debug Data Break Store Exception
- 1 Debug Data Break Store Exception
This bit is read-only (R) and reads as zero if not
implemented. */
uint64_t ddbl:1; /**< Indicates that a Debug Data Break Load exception
occurred on a load due to a precise data hardware
break. Cleared on exception in Debug Mode.
- 0 No Debug Data Break Store Exception
- 1 Debug Data Break Store Exception
This bit is read-only (R) and reads as zero if not
implemented. */
uint64_t dbp:1; /**< Indicates that a Debug Breakpoint exception
occurred. Cleared on exception in Debug Mode.
- 0 No Debug Breakpoint exception
- 1 Debug Breakpoint exception */
uint64_t dss:1; /**< Indicates that a Debug Single Step exception
occurred. Cleared on exception in Debug Mode.
- 0 No debug single-step exception
- 1 Debug single-step exception
This bit is read-only (R) and reads as zero if not
implemented. */
} s;
} cvmx_debug_register_t;
typedef struct
{
void (*init)(void);
void (*install_break_handler)(void);
int needs_proxy;
int (*getpacket)(char *, size_t);
int (*putpacket)(char *);
void (*wait_for_resume)(volatile cvmx_debug_core_context_t *, cvmx_debug_state_t);
void (*change_core)(int, int);
} cvmx_debug_comm_t;
#ifdef __cplusplus
}
#endif
#endif /* __CVMX_DEBUG_H__ */