Adrian Chadd 3b8a3b85eb arge: do a read-after-write on all arge register writes, not just MDIO writes. ... This flushes out the write to the system before anything continues. The mips74k guide, chapter 3.3.3 (write gathering) notes that writes can be buffered in FIFOs - even uncached ones - so we can't guarantee the device has felt its effects. Now, since we're all lazy driver authors and don't pepper read/write barriers everywhere, fake it here. tested: * mips74k - QCA9558 SoC (AP135 reference board)		2015-10-30 22:53:30 +00:00
..
apb.c	ACK interrupts on the new SoCs.	2015-01-05 02:00:41 +00:00
apbvar.h	The AR71xx has APB interrupts in the MISC registers from 0-7, later	2014-03-16 08:39:46 +00:00
ar71xx_bus_space_reversed.c
ar71xx_bus_space_reversed.h
ar71xx_chip.c	Reshuffle all of the DDR flush operations into a single switch/mux,	2015-07-04 03:05:57 +00:00
ar71xx_chip.h
ar71xx_cpudef.h	Reshuffle all of the DDR flush operations into a single switch/mux,	2015-07-04 03:05:57 +00:00
ar71xx_ehci.c	Reshuffle all of the DDR flush operations into a single switch/mux,	2015-07-04 03:05:57 +00:00
ar71xx_fixup.c
ar71xx_fixup.h
ar71xx_gpio.c	Add GPIO function mux configuration for AR934x SoCs.	2015-03-21 06:08:35 +00:00
ar71xx_gpiovar.h	Implement GPIO_GET_BUS() method for all GPIO drivers.	2015-01-31 19:32:14 +00:00
ar71xx_macaddr.c	Begin moving support for board MAC addresses over to being explicitly defined.	2015-03-28 23:40:29 +00:00
ar71xx_macaddr.h	Begin moving support for board MAC addresses over to being explicitly defined.	2015-03-28 23:40:29 +00:00
ar71xx_machdep.c	Populate hw.model with the CPU model information.	2015-07-14 05:14:10 +00:00
ar71xx_ohci.c	Reshuffle all of the DDR flush operations into a single switch/mux,	2015-07-04 03:05:57 +00:00
ar71xx_pci_bus_space.c
ar71xx_pci_bus_space.h
ar71xx_pci.c	Remove unused variable leading to compile errors.	2015-09-17 06:07:49 +00:00
ar71xx_setup.c	Add initial Qualcomm Atheros QCA955x SoC support.	2015-01-05 02:06:26 +00:00
ar71xx_setup.h	add QCA955x SoC types.	2015-01-05 01:59:44 +00:00
ar71xx_spi.c	Devices that rely on hints or identify routines for discovery need to	2013-10-29 14:07:31 +00:00
ar71xx_wdog.c	Devices that rely on hints or identify routines for discovery need to	2013-10-29 14:07:31 +00:00
ar71xxreg.h	Add a MII mode for SGMII.	2015-03-02 01:23:59 +00:00
ar91xx_chip.c	Reshuffle all of the DDR flush operations into a single switch/mux,	2015-07-04 03:05:57 +00:00
ar91xx_chip.h
ar91xxreg.h
ar724x_chip.c	Reshuffle all of the DDR flush operations into a single switch/mux,	2015-07-04 03:05:57 +00:00
ar724x_chip.h
ar724x_pci.c	Remove more unused variables leading to compile time errors.	2015-09-17 12:04:41 +00:00
ar724xreg.h	Note that the AR724x PCIe registers are actually from the PCI_CTRL	2015-03-21 05:59:45 +00:00
ar933x_chip.c	Reshuffle all of the DDR flush operations into a single switch/mux,	2015-07-04 03:05:57 +00:00
ar933x_chip.h
ar933x_uart.h	* Fix clock register definitions	2013-03-29 06:32:02 +00:00
ar933xreg.h	Add register definitions for the AR933x SoC GMAC (ie, ethernet MAC)	2013-10-14 23:57:12 +00:00
ar934x_chip.c	Reshuffle all of the DDR flush operations into a single switch/mux,	2015-07-04 03:05:57 +00:00
ar934x_chip.h	Implement some initial AR934x support routines.	2013-07-21 03:56:57 +00:00
ar934x_nfcreg.h	Add the AR934x NAND flash controller register definitions.	2014-03-18 12:18:35 +00:00
ar934xreg.h	Add AR934x specific GPIO functions and output MUX configuration.	2015-01-03 06:35:53 +00:00
files.ar71xx	Add initial support for the QCA955x PCIe host controller.	2015-05-19 05:31:58 +00:00
if_arge.c	Oops - use the wrong array offset.	2015-10-28 23:39:33 +00:00
if_argevar.h	arge: do a read-after-write on all arge register writes, not just MDIO writes.	2015-10-30 22:53:30 +00:00
pcf2123_rtc.c
pcf2123reg.h
qca955x_chip.c	Reshuffle all of the DDR flush operations into a single switch/mux,	2015-07-04 03:05:57 +00:00
qca955x_chip.h	Add initial Qualcomm Atheros QCA955x SoC support.	2015-01-05 02:06:26 +00:00
qca955x_pci.c	Remove more unused variables leading to compile time errors.	2015-09-17 12:04:41 +00:00
qca955xreg.h	Oops - fix typo.	2015-07-03 07:00:24 +00:00
std.ar71xx
uart_bus_ar71xx.c	Use the UART frequency when programming the UART clock.	2013-07-21 03:54:39 +00:00
uart_bus_ar933x.c	Use the UART frequency when programming the UART clock.	2013-07-21 03:54:39 +00:00
uart_cpu_ar71xx.c	Use the UART frequency when programming the UART clock.	2013-07-21 03:54:39 +00:00
uart_cpu_ar933x.c	Use the UART frequency when programming the UART clock.	2013-07-21 03:54:39 +00:00
uart_dev_ar933x.c	Add support for the uart classes to set their default register shift value.	2015-04-11 17:16:23 +00:00
uart_dev_ar933x.h