freebsd-dev/sys/arm/xscale/ixp425/avila_ata.c
Sam Leffler ea158edaa6 Now that we have UARTs running with fast interrupt handlers the ata
driver's i/o ops must be locked to avoid chaos.  Extend the cambria
bus tag to support ata and add a spin lock.  The ata driver is
hacked to use that instead of it's builtin hack for ixp425.  Once
the ata driver is fixed to not be confused about byte order we can
generalize the cambria bus tag code and make it generally useful.

While here take advantage of our being ixp435-specific to remove
delays when switching between byte+word accesses and to eliminate
the 2us delay for the uarts (the spin lock overhead looks to do
this for us).
2009-06-23 19:29:23 +00:00

560 lines
16 KiB
C

/*-
* Copyright (c) 2006 Sam Leffler, Errno Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
* redistribution must be conditioned upon including a substantially
* similar Disclaimer requirement for further binary redistribution.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
* AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
* THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
* OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
* IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGES.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*
* Compact Flash Support for the Avila Gateworks XScale boards.
* The CF slot is operated in "True IDE" mode. Registers are on
* the Expansion Bus connected to CS1 and CS2. Interrupts are
* tied to GPIO pin 12. No DMA, just PIO.
*
* The ADI Pronghorn Metro is very similar. It use CS3 and CS4 and
* GPIO pin 0 for interrupts.
*
* See also http://www.intel.com/design/network/applnots/302456.htm.
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/time.h>
#include <sys/bus.h>
#include <sys/resource.h>
#include <sys/rman.h>
#include <sys/sysctl.h>
#include <sys/endian.h>
#include <machine/bus.h>
#include <machine/cpu.h>
#include <machine/cpufunc.h>
#include <machine/resource.h>
#include <machine/intr.h>
#include <arm/xscale/ixp425/ixp425reg.h>
#include <arm/xscale/ixp425/ixp425var.h>
#include <sys/ata.h>
#include <sys/sema.h>
#include <sys/taskqueue.h>
#include <vm/uma.h>
#include <dev/ata/ata-all.h>
#include <ata_if.h>
#define AVILA_IDE_CTRL 0x06
struct ata_config {
const char *desc; /* description for probe */
uint8_t gpin; /* GPIO pin */
uint8_t irq; /* IRQ */
uint32_t base16; /* CS base addr for 16-bit */
uint32_t size16; /* CS size for 16-bit */
uint32_t off16; /* CS offset for 16-bit */
uint32_t basealt; /* CS base addr for alt */
uint32_t sizealt; /* CS size for alt */
uint32_t offalt; /* CS offset for alt */
};
static const struct ata_config *
ata_getconfig(struct ixp425_softc *sa)
{
static const struct ata_config configs[] = {
{ .desc = "Gateworks Avila IDE/CF Controller",
.gpin = 12,
.irq = IXP425_INT_GPIO_12,
.base16 = IXP425_EXP_BUS_CS1_HWBASE,
.size16 = IXP425_EXP_BUS_CS1_SIZE,
.off16 = EXP_TIMING_CS1_OFFSET,
.basealt = IXP425_EXP_BUS_CS2_HWBASE,
.sizealt = IXP425_EXP_BUS_CS2_SIZE,
.offalt = EXP_TIMING_CS2_OFFSET,
},
{ .desc = "Gateworks Cambria IDE/CF Controller",
.gpin = 12,
.irq = IXP425_INT_GPIO_12,
.base16 = CAMBRIA_CFSEL0_HWBASE,
.size16 = CAMBRIA_CFSEL0_SIZE,
.off16 = EXP_TIMING_CS3_OFFSET,
.basealt = CAMBRIA_CFSEL1_HWBASE,
.sizealt = CAMBRIA_CFSEL1_SIZE,
.offalt = EXP_TIMING_CS4_OFFSET,
},
{ .desc = "ADI Pronghorn Metro IDE/CF Controller",
.gpin = 0,
.irq = IXP425_INT_GPIO_0,
.base16 = IXP425_EXP_BUS_CS3_HWBASE,
.size16 = IXP425_EXP_BUS_CS3_SIZE,
.off16 = EXP_TIMING_CS3_OFFSET,
.basealt = IXP425_EXP_BUS_CS4_HWBASE,
.sizealt = IXP425_EXP_BUS_CS4_SIZE,
.offalt = EXP_TIMING_CS4_OFFSET,
},
};
/* XXX honor hint? (but then no multi-board support) */
/* XXX total hack */
if (cpu_is_ixp43x())
return &configs[1]; /* Cambria */
if (EXP_BUS_READ_4(sa, EXP_TIMING_CS2_OFFSET) != 0)
return &configs[0]; /* Avila */
return &configs[2]; /* Pronghorn */
}
struct ata_avila_softc {
device_t sc_dev;
bus_space_tag_t sc_iot;
bus_space_handle_t sc_exp_ioh; /* Exp Bus config registers */
bus_space_handle_t sc_ioh; /* CS1/3 data registers */
bus_space_handle_t sc_alt_ioh; /* CS2/4 data registers */
struct bus_space sc_expbus_tag;
struct resource sc_ata; /* hand-crafted for ATA */
struct resource sc_alt_ata; /* hand-crafted for ATA */
u_int32_t sc_16bit_off; /* EXP_TIMING_CSx_OFFSET */
int sc_rid; /* rid for IRQ */
struct resource *sc_irq; /* IRQ resource */
void *sc_ih; /* interrupt handler */
struct {
void (*cb)(void *);
void *arg;
} sc_intr[1]; /* NB: 1/channel */
};
static void ata_avila_intr(void *);
bs_protos(ata);
static void ata_bs_rm_2_s(void *, bus_space_handle_t, bus_size_t,
u_int16_t *, bus_size_t);
static void ata_bs_wm_2_s(void *, bus_space_handle_t, bus_size_t,
const u_int16_t *, bus_size_t);
static int
ata_avila_probe(device_t dev)
{
struct ixp425_softc *sa = device_get_softc(device_get_parent(dev));
const struct ata_config *config;
config = ata_getconfig(sa);
if (config != NULL) {
device_set_desc_copy(dev, config->desc);
return 0;
}
return ENXIO;
}
static int
ata_avila_attach(device_t dev)
{
struct ata_avila_softc *sc = device_get_softc(dev);
struct ixp425_softc *sa = device_get_softc(device_get_parent(dev));
const struct ata_config *config;
config = ata_getconfig(sa);
KASSERT(config != NULL, ("no board config"));
sc->sc_dev = dev;
/* NB: borrow from parent */
sc->sc_iot = sa->sc_iot;
sc->sc_exp_ioh = sa->sc_exp_ioh;
if (bus_space_map(sc->sc_iot, config->base16, config->size16,
0, &sc->sc_ioh))
panic("%s: cannot map 16-bit window (0x%x/0x%x)",
__func__, config->base16, config->size16);
if (bus_space_map(sc->sc_iot, config->basealt, config->sizealt,
0, &sc->sc_alt_ioh))
panic("%s: cannot map alt window (0x%x/0x%x)",
__func__, config->basealt, config->sizealt);
sc->sc_16bit_off = config->off16;
if (config->base16 != CAMBRIA_CFSEL0_HWBASE) {
/*
* Craft special resource for ATA bus space ops
* that go through the expansion bus and require
* special hackery to ena/dis 16-bit operations.
*
* XXX probably should just make this generic for
* accessing the expansion bus.
*/
sc->sc_expbus_tag.bs_cookie = sc; /* NB: backpointer */
/* read single */
sc->sc_expbus_tag.bs_r_1 = ata_bs_r_1,
sc->sc_expbus_tag.bs_r_2 = ata_bs_r_2,
/* read multiple */
sc->sc_expbus_tag.bs_rm_2 = ata_bs_rm_2,
sc->sc_expbus_tag.bs_rm_2_s = ata_bs_rm_2_s,
/* write (single) */
sc->sc_expbus_tag.bs_w_1 = ata_bs_w_1,
sc->sc_expbus_tag.bs_w_2 = ata_bs_w_2,
/* write multiple */
sc->sc_expbus_tag.bs_wm_2 = ata_bs_wm_2,
sc->sc_expbus_tag.bs_wm_2_s = ata_bs_wm_2_s,
rman_set_bustag(&sc->sc_ata, &sc->sc_expbus_tag);
rman_set_bustag(&sc->sc_alt_ata, &sc->sc_expbus_tag);
} else {
/*
* On Cambria use the shared CS3 expansion bus tag
* that handles interlock for sharing access with the
* optional UART's.
*/
rman_set_bustag(&sc->sc_ata, &cambria_exp_bs_tag);
rman_set_bustag(&sc->sc_alt_ata, &cambria_exp_bs_tag);
}
rman_set_bushandle(&sc->sc_ata, sc->sc_ioh);
rman_set_bushandle(&sc->sc_alt_ata, sc->sc_alt_ioh);
ixp425_set_gpio(sa, config->gpin, GPIO_TYPE_EDG_RISING);
/* configure CS1/3 window, leaving timing unchanged */
EXP_BUS_WRITE_4(sc, sc->sc_16bit_off,
EXP_BUS_READ_4(sc, sc->sc_16bit_off) |
EXP_BYTE_EN | EXP_WR_EN | EXP_BYTE_RD16 | EXP_CS_EN);
/* configure CS2/4 window, leaving timing unchanged */
EXP_BUS_WRITE_4(sc, config->offalt,
EXP_BUS_READ_4(sc, config->offalt) |
EXP_BYTE_EN | EXP_WR_EN | EXP_BYTE_RD16 | EXP_CS_EN);
/* setup interrupt */
sc->sc_irq = bus_alloc_resource(dev, SYS_RES_IRQ, &sc->sc_rid,
config->irq, config->irq, 1, RF_ACTIVE);
if (!sc->sc_irq)
panic("Unable to allocate irq %u.\n", config->irq);
bus_setup_intr(dev, sc->sc_irq,
INTR_TYPE_BIO | INTR_MPSAFE | INTR_ENTROPY,
NULL, ata_avila_intr, sc, &sc->sc_ih);
/* attach channel on this controller */
device_add_child(dev, "ata", -1);
bus_generic_attach(dev);
return 0;
}
static int
ata_avila_detach(device_t dev)
{
struct ata_avila_softc *sc = device_get_softc(dev);
device_t *children;
int nc;
/* XXX quiesce gpio? */
/* detach & delete all children */
if (device_get_children(dev, &children, &nc) == 0) {
if (nc > 0)
device_delete_child(dev, children[0]);
free(children, M_TEMP);
}
bus_teardown_intr(dev, sc->sc_irq, sc->sc_ih);
bus_release_resource(dev, SYS_RES_IRQ, sc->sc_rid, sc->sc_irq);
return 0;
}
static void
ata_avila_intr(void *xsc)
{
struct ata_avila_softc *sc = xsc;
if (sc->sc_intr[0].cb != NULL)
sc->sc_intr[0].cb(sc->sc_intr[0].arg);
}
static struct resource *
ata_avila_alloc_resource(device_t dev, device_t child, int type, int *rid,
u_long start, u_long end, u_long count, u_int flags)
{
struct ata_avila_softc *sc = device_get_softc(dev);
KASSERT(type == SYS_RES_IRQ && *rid == ATA_IRQ_RID,
("type %u rid %u start %lu end %lu count %lu flags %u",
type, *rid, start, end, count, flags));
/* doesn't matter what we return so reuse the real thing */
return sc->sc_irq;
}
static int
ata_avila_release_resource(device_t dev, device_t child, int type, int rid,
struct resource *r)
{
KASSERT(type == SYS_RES_IRQ && rid == ATA_IRQ_RID,
("type %u rid %u", type, rid));
return 0;
}
static int
ata_avila_setup_intr(device_t dev, device_t child, struct resource *irq,
int flags, driver_filter_t *filt,
driver_intr_t *function, void *argument, void **cookiep)
{
struct ata_avila_softc *sc = device_get_softc(dev);
int unit = ((struct ata_channel *)device_get_softc(child))->unit;
KASSERT(unit == 0, ("unit %d", unit));
sc->sc_intr[unit].cb = function;
sc->sc_intr[unit].arg = argument;
*cookiep = sc;
return 0;
}
static int
ata_avila_teardown_intr(device_t dev, device_t child, struct resource *irq,
void *cookie)
{
struct ata_avila_softc *sc = device_get_softc(dev);
int unit = ((struct ata_channel *)device_get_softc(child))->unit;
KASSERT(unit == 0, ("unit %d", unit));
sc->sc_intr[unit].cb = NULL;
sc->sc_intr[unit].arg = NULL;
return 0;
}
/*
* Bus space accessors for CF-IDE PIO operations.
*/
/*
* Enable/disable 16-bit ops on the expansion bus.
*/
static __inline void
enable_16(struct ata_avila_softc *sc)
{
EXP_BUS_WRITE_4(sc, sc->sc_16bit_off,
EXP_BUS_READ_4(sc, sc->sc_16bit_off) &~ EXP_BYTE_EN);
DELAY(100); /* XXX? */
}
static __inline void
disable_16(struct ata_avila_softc *sc)
{
DELAY(100); /* XXX? */
EXP_BUS_WRITE_4(sc, sc->sc_16bit_off,
EXP_BUS_READ_4(sc, sc->sc_16bit_off) | EXP_BYTE_EN);
}
uint8_t
ata_bs_r_1(void *t, bus_space_handle_t h, bus_size_t o)
{
struct ata_avila_softc *sc = t;
return bus_space_read_1(sc->sc_iot, h, o);
}
void
ata_bs_w_1(void *t, bus_space_handle_t h, bus_size_t o, u_int8_t v)
{
struct ata_avila_softc *sc = t;
bus_space_write_1(sc->sc_iot, h, o, v);
}
uint16_t
ata_bs_r_2(void *t, bus_space_handle_t h, bus_size_t o)
{
struct ata_avila_softc *sc = t;
uint16_t v;
enable_16(sc);
v = bus_space_read_2(sc->sc_iot, h, o);
disable_16(sc);
return v;
}
void
ata_bs_w_2(void *t, bus_space_handle_t h, bus_size_t o, uint16_t v)
{
struct ata_avila_softc *sc = t;
enable_16(sc);
bus_space_write_2(sc->sc_iot, h, o, v);
disable_16(sc);
}
void
ata_bs_rm_2(void *t, bus_space_handle_t h, bus_size_t o,
u_int16_t *d, bus_size_t c)
{
struct ata_avila_softc *sc = t;
enable_16(sc);
bus_space_read_multi_2(sc->sc_iot, h, o, d, c);
disable_16(sc);
}
void
ata_bs_wm_2(void *t, bus_space_handle_t h, bus_size_t o,
const u_int16_t *d, bus_size_t c)
{
struct ata_avila_softc *sc = t;
enable_16(sc);
bus_space_write_multi_2(sc->sc_iot, h, o, d, c);
disable_16(sc);
}
/* XXX workaround ata driver by (incorrectly) byte swapping stream cases */
void
ata_bs_rm_2_s(void *t, bus_space_handle_t h, bus_size_t o,
u_int16_t *d, bus_size_t c)
{
struct ata_avila_softc *sc = t;
uint16_t v;
bus_size_t i;
enable_16(sc);
#if 1
for (i = 0; i < c; i++) {
v = bus_space_read_2(sc->sc_iot, h, o);
d[i] = bswap16(v);
}
#else
bus_space_read_multi_stream_2(sc->sc_iot, h, o, d, c);
#endif
disable_16(sc);
}
void
ata_bs_wm_2_s(void *t, bus_space_handle_t h, bus_size_t o,
const u_int16_t *d, bus_size_t c)
{
struct ata_avila_softc *sc = t;
bus_size_t i;
enable_16(sc);
#if 1
for (i = 0; i < c; i++)
bus_space_write_2(sc->sc_iot, h, o, bswap16(d[i]));
#else
bus_space_write_multi_stream_2(sc->sc_iot, h, o, d, c);
#endif
disable_16(sc);
}
static device_method_t ata_avila_methods[] = {
/* device interface */
DEVMETHOD(device_probe, ata_avila_probe),
DEVMETHOD(device_attach, ata_avila_attach),
DEVMETHOD(device_detach, ata_avila_detach),
DEVMETHOD(device_shutdown, bus_generic_shutdown),
DEVMETHOD(device_suspend, bus_generic_suspend),
DEVMETHOD(device_resume, bus_generic_resume),
/* bus methods */
DEVMETHOD(bus_alloc_resource, ata_avila_alloc_resource),
DEVMETHOD(bus_release_resource, ata_avila_release_resource),
DEVMETHOD(bus_activate_resource, bus_generic_activate_resource),
DEVMETHOD(bus_deactivate_resource, bus_generic_deactivate_resource),
DEVMETHOD(bus_setup_intr, ata_avila_setup_intr),
DEVMETHOD(bus_teardown_intr, ata_avila_teardown_intr),
{ 0, 0 }
};
devclass_t ata_avila_devclass;
static driver_t ata_avila_driver = {
"ata_avila",
ata_avila_methods,
sizeof(struct ata_avila_softc),
};
DRIVER_MODULE(ata_avila, ixp, ata_avila_driver, ata_avila_devclass, 0, 0);
MODULE_VERSION(ata_avila, 1);
MODULE_DEPEND(ata_avila, ata, 1, 1, 1);
static int
avila_channel_probe(device_t dev)
{
struct ata_channel *ch = device_get_softc(dev);
ch->unit = 0;
ch->flags |= ATA_USE_16BIT | ATA_NO_SLAVE;
device_set_desc_copy(dev, "ATA channel 0");
return ata_probe(dev);
}
static int
avila_channel_attach(device_t dev)
{
struct ata_avila_softc *sc = device_get_softc(device_get_parent(dev));
struct ata_channel *ch = device_get_softc(dev);
int i;
for (i = 0; i < ATA_MAX_RES; i++)
ch->r_io[i].res = &sc->sc_ata;
ch->r_io[ATA_DATA].offset = ATA_DATA;
ch->r_io[ATA_FEATURE].offset = ATA_FEATURE;
ch->r_io[ATA_COUNT].offset = ATA_COUNT;
ch->r_io[ATA_SECTOR].offset = ATA_SECTOR;
ch->r_io[ATA_CYL_LSB].offset = ATA_CYL_LSB;
ch->r_io[ATA_CYL_MSB].offset = ATA_CYL_MSB;
ch->r_io[ATA_DRIVE].offset = ATA_DRIVE;
ch->r_io[ATA_COMMAND].offset = ATA_COMMAND;
ch->r_io[ATA_ERROR].offset = ATA_FEATURE;
/* NB: should be used only for ATAPI devices */
ch->r_io[ATA_IREASON].offset = ATA_COUNT;
ch->r_io[ATA_STATUS].offset = ATA_COMMAND;
/* NB: the control and alt status registers are special */
ch->r_io[ATA_ALTSTAT].res = &sc->sc_alt_ata;
ch->r_io[ATA_ALTSTAT].offset = AVILA_IDE_CTRL;
ch->r_io[ATA_CONTROL].res = &sc->sc_alt_ata;
ch->r_io[ATA_CONTROL].offset = AVILA_IDE_CTRL;
/* NB: by convention this points at the base of registers */
ch->r_io[ATA_IDX_ADDR].offset = 0;
ata_generic_hw(dev);
return ata_attach(dev);
}
static device_method_t avila_channel_methods[] = {
/* device interface */
DEVMETHOD(device_probe, avila_channel_probe),
DEVMETHOD(device_attach, avila_channel_attach),
DEVMETHOD(device_detach, ata_detach),
DEVMETHOD(device_shutdown, bus_generic_shutdown),
DEVMETHOD(device_suspend, ata_suspend),
DEVMETHOD(device_resume, ata_resume),
{ 0, 0 }
};
driver_t avila_channel_driver = {
"ata",
avila_channel_methods,
sizeof(struct ata_channel),
};
DRIVER_MODULE(ata, ata_avila, avila_channel_driver, ata_devclass, 0, 0);