freebsd-dev/sys/mips/atheros
Adrian Chadd b2c9e1e324 Add initial support for the QCA955x PCIe host controller.
The QCA955x looks a lot like the AR724x PCIe controller, except it
supports two root complexes.  Unfortunately I only have one, so
although this code has started down the path of supporting more than
one, it's definitely not yet ready.

Tested:

* AP135 board (QCA9558 SoC), with the 11ac NIC swapped for an AR9380
  PCIe NIC.

Notes:

* Yes, this driver isn't very pretty.  I decided to commit what I have
  versus holding onto something that isn't yet finished.  It is enough
  to bring up the above NIC and interrupt routing works, so it's a good
  start.

* However, yes, the DDR flush routine hooks need to be fixed up.
  I don't think I'm firing the right one at the moment.
2015-05-19 05:31:58 +00:00
..
apb.c ACK interrupts on the new SoCs. 2015-01-05 02:00:41 +00:00
apbvar.h The AR71xx has APB interrupts in the MISC registers from 0-7, later 2014-03-16 08:39:46 +00:00
ar71xx_bus_space_reversed.c
ar71xx_bus_space_reversed.h
ar71xx_chip.c Add new features - an MDIO clock, WMAC reset, GMAC reset and ethernet 2013-10-15 01:35:48 +00:00
ar71xx_chip.h
ar71xx_cpudef.h Add a GPIO output mux configuration method. 2015-01-03 06:55:58 +00:00
ar71xx_ehci.c [QCA955x] make the USB EHCI interrupts shareable. 2015-03-02 02:08:43 +00:00
ar71xx_fixup.c
ar71xx_fixup.h
ar71xx_gpio.c Add GPIO function mux configuration for AR934x SoCs. 2015-03-21 06:08:35 +00:00
ar71xx_gpiovar.h Implement GPIO_GET_BUS() method for all GPIO drivers. 2015-01-31 19:32:14 +00:00
ar71xx_macaddr.c Begin moving support for board MAC addresses over to being explicitly defined. 2015-03-28 23:40:29 +00:00
ar71xx_macaddr.h Begin moving support for board MAC addresses over to being explicitly defined. 2015-03-28 23:40:29 +00:00
ar71xx_machdep.c Begin moving support for board MAC addresses over to being explicitly defined. 2015-03-28 23:40:29 +00:00
ar71xx_ohci.c Add 64-bit DMA support in the XHCI controller driver. 2015-01-05 20:22:18 +00:00
ar71xx_pci_bus_space.c
ar71xx_pci_bus_space.h
ar71xx_pci.c Devices that rely on hints or identify routines for discovery need to 2013-10-29 14:07:31 +00:00
ar71xx_setup.c Add initial Qualcomm Atheros QCA955x SoC support. 2015-01-05 02:06:26 +00:00
ar71xx_setup.h add QCA955x SoC types. 2015-01-05 01:59:44 +00:00
ar71xx_spi.c Devices that rely on hints or identify routines for discovery need to 2013-10-29 14:07:31 +00:00
ar71xx_wdog.c Devices that rely on hints or identify routines for discovery need to 2013-10-29 14:07:31 +00:00
ar71xxreg.h Add a MII mode for SGMII. 2015-03-02 01:23:59 +00:00
ar91xx_chip.c Add new features - an MDIO clock, WMAC reset, GMAC reset and ethernet 2013-10-15 01:35:48 +00:00
ar91xx_chip.h
ar91xxreg.h
ar724x_chip.c Add new features - an MDIO clock, WMAC reset, GMAC reset and ethernet 2013-10-15 01:35:48 +00:00
ar724x_chip.h
ar724x_pci.c Fix the AR724x PCIe glue to correctly probe the BAR on AR7240 devices. 2014-09-28 07:27:58 +00:00
ar724xreg.h Note that the AR724x PCIe registers are actually from the PCI_CTRL 2015-03-21 05:59:45 +00:00
ar933x_chip.c Update the AR933x SoC support to include a few new knobs: 2013-10-15 03:23:08 +00:00
ar933x_chip.h Commit initial (unfinished!) support for the AR933x series of embedded 2013-03-27 03:38:58 +00:00
ar933x_uart.h * Fix clock register definitions 2013-03-29 06:32:02 +00:00
ar933xreg.h Add register definitions for the AR933x SoC GMAC (ie, ethernet MAC) 2013-10-14 23:57:12 +00:00
ar934x_chip.c Add a GPIO output mux configuration method. 2015-01-03 06:55:58 +00:00
ar934x_chip.h Implement some initial AR934x support routines. 2013-07-21 03:56:57 +00:00
ar934x_nfcreg.h Add the AR934x NAND flash controller register definitions. 2014-03-18 12:18:35 +00:00
ar934xreg.h Add AR934x specific GPIO functions and output MUX configuration. 2015-01-03 06:35:53 +00:00
files.ar71xx Add initial support for the QCA955x PCIe host controller. 2015-05-19 05:31:58 +00:00
if_arge.c Begin moving support for board MAC addresses over to being explicitly defined. 2015-03-28 23:40:29 +00:00
if_argevar.h The linux driver code for the MDIO bus does a read-after-write 2015-02-02 17:33:00 +00:00
pcf2123_rtc.c
pcf2123reg.h
qca955x_chip.c Add ethernet MAC DDR flush hookups for QCA955x. 2015-03-04 03:52:50 +00:00
qca955x_chip.h Add initial Qualcomm Atheros QCA955x SoC support. 2015-01-05 02:06:26 +00:00
qca955x_pci.c Add initial support for the QCA955x PCIe host controller. 2015-05-19 05:31:58 +00:00
qca955xreg.h add QCA955x PCIe configuration registers. 2015-03-21 06:00:46 +00:00
std.ar71xx
uart_bus_ar71xx.c Use the UART frequency when programming the UART clock. 2013-07-21 03:54:39 +00:00
uart_bus_ar933x.c Use the UART frequency when programming the UART clock. 2013-07-21 03:54:39 +00:00
uart_cpu_ar71xx.c Use the UART frequency when programming the UART clock. 2013-07-21 03:54:39 +00:00
uart_cpu_ar933x.c Use the UART frequency when programming the UART clock. 2013-07-21 03:54:39 +00:00
uart_dev_ar933x.c Add support for the uart classes to set their default register shift value. 2015-04-11 17:16:23 +00:00
uart_dev_ar933x.h Bring over the initial, CPU-only UART support for the AR933x SoC. 2013-03-28 19:27:06 +00:00