Warner Losh 4587b6e9fd Switch to using PAs rather than VAs for the addresses we map for ... devices. This is a nop, except for what's reported by atmelbus for the resources. It would be nice if we could dymanically allocated these things, but the pmap_mapdev panics if we don't keep the static mappings, so we still need to play the carefully allocate VA space between all supported SoC game. User's with their own devices may need to make adjustments.		2014-01-31 15:38:05 +00:00
..
at91_aicreg.h
at91_cfata.c
at91_gpio.h	Provide a simplified way to specify GPIO pins for the Atmel port.	2014-01-15 19:49:12 +00:00
at91_machdep.c	Switch to using PAs rather than VAs for the addresses we map for	2014-01-31 15:38:05 +00:00
at91_mci.c	Remove #include <machine/frame.h> from all the arm code that doesn't	2013-10-27 01:34:10 +00:00
at91_mcireg.h
at91_pdcreg.h
at91_pio_sam9g20.h
at91_pio_sam9g45.h
at91_pio.c	Fix regression issue after r248910.	2013-04-07 13:03:57 +00:00
at91_pioreg.h	Add definitions for the additional PIO pins found on recent AT91 SoCs.	2013-12-02 02:33:03 +00:00
at91_piovar.h	Fix regression issue after r248910.	2013-04-07 13:03:57 +00:00
at91_pit.c
at91_pitreg.h
at91_pmc.c	Remove #include <machine/frame.h> from all the arm code that doesn't	2013-10-27 01:34:10 +00:00
at91_pmcreg.h
at91_pmcvar.h	Correct the PLLA setting functions and centralize.	2012-08-11 05:45:19 +00:00
at91_reset.S
at91_rst.c
at91_rstreg.h
at91_rtc.c	Loop reading the RTC registers until the same values are obtained	2012-10-07 20:36:46 +00:00
at91_rtcreg.h	Use the RTC unit to get the time. This works on all known AT91SAM9*	2012-10-07 01:58:32 +00:00
at91_smc.c	Add standard memory controller helper functions.	2014-01-19 17:45:13 +00:00
at91_smc.h	Add standard memory controller helper functions.	2014-01-19 17:45:13 +00:00
at91_spi.c	Fetch the chip select in the bridge driver, like all the other spi	2012-08-23 22:38:37 +00:00
at91_spireg.h
at91_ssc.c
at91_sscreg.h
at91_st.c
at91_streg.h
at91_twi.c
at91_twiio.h
at91_twireg.h
at91_usartreg.h
at91_wdt.c
at91_wdtreg.h
at91.c	Switch to using PAs rather than VAs for the addresses we map for	2014-01-31 15:38:05 +00:00
at91board.h
at91reg.h
at91rm92reg.h	Switch to using PAs rather than VAs for the addresses we map for	2014-01-31 15:38:05 +00:00
at91rm9200_devices.c	Fix a typo: the RXD0 pin is PA18, not PA19.	2013-03-29 18:06:54 +00:00
at91rm9200.c	Add data so we can convert a PIO unit number into a base address.	2014-01-15 19:53:36 +00:00
at91rm9200var.h
at91sam9g20.c	Add data so we can convert a PIO unit number into a base address.	2014-01-15 19:53:36 +00:00
at91sam9g20reg.h	Switch to using PAs rather than VAs for the addresses we map for	2014-01-31 15:38:05 +00:00
at91sam9g45.c	Add data so we can convert a PIO unit number into a base address.	2014-01-15 19:53:36 +00:00
at91sam9g45reg.h	Switch to using PAs rather than VAs for the addresses we map for	2014-01-31 15:38:05 +00:00
at91sam9x5.c	Add data so we can convert a PIO unit number into a base address.	2014-01-15 19:53:36 +00:00
at91sam9x5reg.h
at91sam9260.c	Add data so we can convert a PIO unit number into a base address.	2014-01-15 19:53:36 +00:00
at91sam9260reg.h
at91soc.c
at91soc.h
at91var.h	Add data so we can convert a PIO unit number into a base address.	2014-01-15 19:53:36 +00:00
board_bwct.c
board_eb9200.c	Preliminary Embest ATEB9200 support.	2012-08-16 05:03:59 +00:00
board_ethernut5.c
board_hl200.c
board_hl201.c	Connect NAND for the SAM9260EK eval board, as well as the HotE HL-201.	2014-01-19 17:59:34 +00:00
board_kb920x.c
board_qila9g20.c
board_sam9g20ek.c
board_sam9x25ek.c
board_sam9260ek.c	Fix gcc with -Wstrict-prototypes by telling it bi_emac takes no parameters.	2014-01-25 19:36:27 +00:00
board_sn9g45.c
board_tsc4370.c
files.at91	Add standard memory controller helper functions.	2014-01-19 17:45:13 +00:00
if_ate.c	Loose -> Lose so this sentence makes sense.	2013-12-11 15:32:28 +00:00
if_atereg.h
if_macb.c	Mechanically substitute flags from historic mbuf allocator with	2012-12-05 08:04:20 +00:00
if_macbreg.h
if_macbvar.h	Fix undefined behavior: (1 << 31) is not defined as 1 is an int and this	2013-11-30 22:17:27 +00:00
std.at91	Set machine correctly on ARM. This allows universe to use the correct world	2012-08-18 05:48:19 +00:00
std.at91sam9	Set machine correctly on ARM. This allows universe to use the correct world	2012-08-18 05:48:19 +00:00
std.at91sam9g45	Set machine correctly on ARM. This allows universe to use the correct world	2012-08-18 05:48:19 +00:00
std.atmel	Set machine correctly on ARM. This allows universe to use the correct world	2012-08-18 05:48:19 +00:00
std.bwct	Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with	2014-01-28 09:12:04 +00:00
std.eb9200	Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with	2014-01-28 09:12:04 +00:00
std.ethernut5	Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with	2014-01-28 09:12:04 +00:00
std.hl200	Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with	2014-01-28 09:12:04 +00:00
std.hl201	Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with	2014-01-28 09:12:04 +00:00
std.kb920x	Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with	2014-01-28 09:12:04 +00:00
std.qila9g20	Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with	2014-01-28 09:12:04 +00:00
std.sam9g20ek	Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with	2014-01-28 09:12:04 +00:00
std.sam9x25ek	Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with	2014-01-28 09:12:04 +00:00
std.sam9260ek	Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with	2014-01-28 09:12:04 +00:00
std.sn9g45	Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with	2014-01-28 09:12:04 +00:00
std.tsc4370	Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with	2014-01-28 09:12:04 +00:00
uart_bus_at91usart.c	Remove redundant declaration for uart devclass.	2014-01-24 16:50:15 +00:00
uart_cpu_at91usart.c	Remove redundant declaration for uart devclass.	2014-01-24 16:50:15 +00:00
uart_dev_at91usart.c	Before resetting the USART, delay a bit to allow the transmitter to	2014-01-26 04:57:58 +00:00