Adrian Chadd 6130ff50fb Setup the CPU port and broadcast map on the AR7240, rather than ... depending upon the bootloader initialising it. The aim is to eventually support a full switch set and reinitialisation rather than relying on a consistent bootloader setup. Remove the port flood config from arswitch.c, it's not yet used and it's totally incorrect. Whilst I'm here, also add in a comment describing why the full switch reset is disabled. Obtained from: Linux (OpenWRT) - Values		2012-05-12 21:08:07 +00:00
..
arswitch_7240.c	Setup the CPU port and broadcast map on the AR7240, rather than	2012-05-12 21:08:07 +00:00
arswitch_7240.h
arswitch_8216.c
arswitch_8216.h
arswitch_8226.c
arswitch_8226.h
arswitch_8316.c	Document what the flood register setting does.	2012-05-12 20:39:41 +00:00
arswitch_8316.h
arswitch_phy.c
arswitch_phy.h
arswitch_reg.c
arswitch_reg.h
arswitch.c	Setup the CPU port and broadcast map on the AR7240, rather than	2012-05-12 21:08:07 +00:00
arswitchreg.h	* Add in the AR7240 global control field for setting the maximum frame	2012-05-12 20:36:12 +00:00
arswitchvar.h