Andreas Tobler da89fa28c6 Add three new drivers for fan control and temperature reading on the ... PowerMac7,2. - The fcu driver lets us read and write the fan RPMs for all fans in the PowerMac7,2. This driver is PowerMac specific. - The ds1775 is a driver to read the temperature for the drive bay sensor. - The max6690 is another driver to read temperatures. Here it is used to read the inlet, the backside and the U3 heatsink temperature. An additional driver, the ad7417, will follow later. Thanks to nwhitehorn for guiding me through this driver development. Approved by: nwhitehorn (mentor)		2010-10-15 20:08:16 +00:00
..
ata_dbdma.c	MFp4:	2009-12-06 00:10:13 +00:00
ata_dbdma.h	Add DMA support for Apple built-in ATA controllers.	2008-09-27 15:13:44 +00:00
ata_kauai.c	ATAPI DMA does not seem to work completely reliably on Shasta controllers,	2010-09-11 22:09:16 +00:00
ata_macio.c	MFp4:	2009-12-06 00:10:13 +00:00
cpcht.c	Configure interrupts on SMP systems to be distributed among all online	2010-06-23 22:33:03 +00:00
cuda.c	Restructure how reset and poweroff are handled on PowerPC systems, since	2010-08-31 15:27:46 +00:00
cudavar.h	Get nexus(4) out of the RTC business. The interface used by nexus(4)	2010-03-23 03:14:44 +00:00
dbdma.c	Clean up some magic numbers in the DBDMA code by replacing them with	2008-10-27 23:11:14 +00:00
dbdmavar.h	Clean up some magic numbers in the DBDMA code by replacing them with	2008-10-27 23:11:14 +00:00
fcu.c	Add three new drivers for fan control and temperature reading on the	2010-10-15 20:08:16 +00:00
grackle.c	Fix printf specifier to allow 32/64 bit builds.	2010-07-12 21:09:55 +00:00
gracklevar.h	Fix the OFW interrupt map parser to use its own idea of the number of interrupt	2009-01-03 19:38:47 +00:00
hrowpic.c	Move the EOI logic when starting ithreads into intr_machdep instead of	2010-07-06 15:27:05 +00:00
hrowpicvar.h
kiic.c	Increase register access delay to deal with the high-latency I2C	2010-09-15 19:08:41 +00:00
macgpio.c	Provide for multiple, cascaded PICs on PowerPC systems, and extend the	2010-06-18 14:06:27 +00:00
macgpiovar.h	Clean up the mac GPIO interface a little. Also remove bogus copyright	2008-12-08 03:00:45 +00:00
macio.c	Provide for multiple, cascaded PICs on PowerPC systems, and extend the	2010-06-18 14:06:27 +00:00
maciovar.h	Take into account the size of the interrupt cell. It's determined	2008-04-26 18:35:44 +00:00
openpic_macio.c	Remove the unneeded header <machine/intr.h>.	2010-07-02 02:17:39 +00:00
platform_powermac.c	Restructure how reset and poweroff are handled on PowerPC systems, since	2010-08-31 15:27:46 +00:00
pmu.c	Restructure how reset and poweroff are handled on PowerPC systems, since	2010-08-31 15:27:46 +00:00
pmuvar.h	Add the ability to control the sleep LED with led(4). Adding this fairly	2008-12-09 01:01:02 +00:00
pswitch.c
smu.c	Restructure how reset and poweroff are handled on PowerPC systems, since	2010-08-31 15:27:46 +00:00
smusat.c	Add a driver for the CPU temperature sensors attached over I2C on the	2010-06-05 17:51:37 +00:00
uninorth.c	Change the default interrupt polarity on PowerPC systems from high to low.	2010-06-18 14:16:24 +00:00
uninorthpci.c	Provide for multiple, cascaded PICs on PowerPC systems, and extend the	2010-06-18 14:06:27 +00:00
uninorthvar.h	Add support for the U4 PCI-Express bridge chipset used in late-generation	2010-05-16 15:18:25 +00:00
vcoregpio.c	Introduce support for cpufreq on PowerPC with the dynamic frequency	2009-05-31 09:01:23 +00:00
viareg.h	Add ADB support. This provides support for the external ADB bus on the PowerMac	2008-10-26 19:37:38 +00:00