96fd5c300d
series, the 8139C+ has a descriptor-based DMA mechanism, and its performance is actually pretty respectable. Note: the 8139D chip does not support C+ mode. Only the 8139C+ and 8169 gigE chips support C+ mode. Supported features: - RX and TX checksum offload - hardware VLAN tag insertion/extraction - TX interrupt moderation using the 8139's on-board timer Everything should be properly busdma'ed and endian-independent, so things should work ok on non-x86 platforms. Unfortunately, my call for testers on this code was met with deafening silence, and I don't have access to any non-x86 FreeBSD boxes at the moment, so this is speculation. The device detection code has been cleaned up a little as well (thanks to Michal Mertl) for the patches. There are also updates to the rl(4) man page (which I accidentally checked in before when I updated the dc(4) man page. Oops.) Todo: finish support for the 8169 gigabit ethernet chip. This mainly requires writing an rlgphy driver to handle the 8169's built-in PHY. This will have to wait until I actually get my hands on an 8169 card for testing though. (I still can't find a source for one in the U.S. Suggestions/pointers welcome.) |
||
---|---|---|
.. | ||
agp_ali.c | ||
agp_amd.c | ||
agp_i810.c | ||
agp_if.m | ||
agp_intel.c | ||
agp_sis.c | ||
agp_via.c | ||
agp.c | ||
agppriv.h | ||
agpreg.h | ||
agpvar.h | ||
alpm.c | ||
amdpm.c | ||
cy_pci.c | ||
dc21040reg.h | ||
if_dc.c | ||
if_dcreg.h | ||
if_de.c | ||
if_devar.h | ||
if_mn.c | ||
if_pcn.c | ||
if_pcnreg.h | ||
if_rl.c | ||
if_rlreg.h | ||
if_sf.c | ||
if_sfreg.h | ||
if_sis.c | ||
if_sisreg.h | ||
if_sk.c | ||
if_skreg.h | ||
if_ste.c | ||
if_stereg.h | ||
if_ti.c | ||
if_tireg.h | ||
if_tl.c | ||
if_tlreg.h | ||
if_vr.c | ||
if_vrreg.h | ||
if_wb.c | ||
if_wbreg.h | ||
if_xl.c | ||
if_xlreg.h | ||
intpm.c | ||
intpmreg.h | ||
locate.pl | ||
meteor_reg.h | ||
meteor.c | ||
ncr.c | ||
ncrreg.h | ||
ti_fw2.h | ||
ti_fw.h | ||
viapm.c | ||
xmaciireg.h | ||
xrpu.c |