freebsd-dev/sys/arm/ti/ti_pinmux.h
Oleksandr Tymoshenko 5b03aba6c8 Switch TI platform support code from using FreeBSD's custom-baked DTS
files to vendor-provided ones. It should make easier to adopt platform
code to new revisions of hardware and to use DTS overlays for various
Beaglebone extensions (shields/capes).

Original dts filenames were not changed, they're now wrappers over dts
files provided by TI. So make sure you update .dtb files on your
devices as part of kernel update

GPIO addressing was changed: instead of one global /dev/gpioc0 there
are per-bank instances of /dev/gpiocX. Each bank has 32 pins so for
instance pin 121 on /dev/gpioc0 in old addressing scheme is now pin 25
on /dev/gpioc3

On Pandaboard serial console devices was changed from /dev/ttyu0 to
/dev/ttyu2 so you'll have to update /etc/ttys to get login prompt
on serial port in multiuser mode. Single user mode serial console
should work as-is

Differential Revision:	https://reviews.freebsd.org/D2146
Reviewed by:	rpaulo, ian, Michal Meloun, Svatopluk Kraus
2015-05-22 03:16:18 +00:00

81 lines
2.8 KiB
C

/*
* Copyright (c) 2010
* Ben Gray <ben.r.gray@gmail.com>.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Ben Gray.
* 4. The name of the company nor the name of the author may be used to
* endorse or promote products derived from this software without specific
* prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY BEN GRAY ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL BEN GRAY BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
/**
* Functions to configure the PIN multiplexing on the chip.
*
* This is different from the GPIO module in that it is used to configure the
* pins between modules not just GPIO input output.
*
*/
#ifndef _TI_PINMUX_H_
#define _TI_PINMUX_H_
struct ti_pinmux_padconf {
uint16_t reg_off;
uint16_t gpio_pin;
uint16_t gpio_mode;
const char *ballname;
const char *muxmodes[8];
};
struct ti_pinmux_padstate {
const char *state;
uint16_t reg;
};
struct ti_pinmux_device {
uint16_t padconf_muxmode_mask;
uint16_t padconf_sate_mask;
const struct ti_pinmux_padstate *padstate;
const struct ti_pinmux_padconf *padconf;
};
struct ti_pinmux_softc {
device_t sc_dev;
struct resource * sc_res[4];
bus_space_tag_t sc_bst;
bus_space_handle_t sc_bsh;
};
int ti_pinmux_padconf_set(const char *padname, const char *muxmode,
unsigned int state);
int ti_pinmux_padconf_get(const char *padname, const char **muxmode,
unsigned int *state);
int ti_pinmux_padconf_set_gpiomode(uint32_t gpio, unsigned int state);
int ti_pinmux_padconf_get_gpiomode(uint32_t gpio, unsigned int *state);
#endif /* _TI_SCM_H_ */